Architecture Commons^™

Comprehensive Numerical Modeling Of Prestressed Girder Bridges Under Low-Velocity Impact, Mohamed T. Elshazli, Mohanad M. Abdulazeez, Mohamed Elgawady, Ahmed Ibrahim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Accidental Collisions Involving Over-Height Trucks That Exceed Vertical Clearance Limits And Bridge Superstructures Frequently Happen, Resulting In Compromised Girders And Potential Threats To Structural Safety And Performance. The Numerical Simulation Of Large-Scale Prestressed Girder Bridge Collisions Poses Challenges Due To The Associated Nonlinearities, As Well As The Limited Availability Of Large-Scale Experimental Testing Data In The Literature Due To Cost And Complexity Constraints. This Study Introduces A Numerical Modeling Approach To Efficiently Capture The Response Of Prestressed Girder Bridges Under Lateral Impact Loads. A Finite Element (FE) Model Was Developed Using LS-DYNA And Meticulously Validated Against Experimental Data From The …

Relocating Lubra Village And Visualizing Himalayan Flood Damages With Remote Sensing, Ronan Wallace, Yungdrung Tsewang Gurung, Ryan Kastner

Journal of Critical Global Issues

As weather patterns change worldwide, isolated communities impacted by climate change go unnoticed and we need community-driven solutions. In Himalayan Mustang, Nepal, indigenous Lubra Village faces threats of increasing flash flooding. After every flood, residual muddy sediment hardens across the riverbed like concrete, causing the riverbed elevation to rise. As elevation increases, sediment encroaches on Lubra’s agricultural fields and homes, magnifying flood vulnerability. In the last monsoon season alone, the Lubra community witnessed floods swallowing several agricultural fields and damaging two homes. One solution considers relocating the village to a new location entirely. However, relocation poses a challenging task, as …

The Rebuild Project, Maria Del Valle

Symposium of Student Scholars

The Rebuild Island Project is meant to create relief for the islands that experienced hurricane damage. The project will be on the site of a city that has abandoned homes, unfiltered water, spoiled agriculture, and a damaged electrical grid. The city will be a self-sustaining city that focuses on cleaning up uninhabitable properties, building educational institutions, and creating community support for local Puerto Ricans. The project will not only be exclusive to Puerto Ricans, this model will be replicated for islands that go through natural disasters and neglectful government. This urban development will be seen through a 10-year plan or …

Practitioner Needs To Adapt To Sea-Level Rise: Distilling Information From Global Workshops, Daniella Hirschfeld, Ray Boyle, Robert J. Nicholls, David Behar, Miguel Esteban, Jochen Hinkel, Gordon Smith, David J. Hanslow

Landscape Architecture and Environmental Planning Faculty Publications

Climate-induced sea-level rise threatens the world’s coastal populations, critical infrastructure, and ecosystems. The science of sea-level rise (SLR) has developed to inform understanding of global climate mitigation and adaptation challenges, but there is much less engagement with practitioners to discern their climate services needs and support the development of adaptation planning and action on the ground. In addition, adaptation planning and implementation processes for SLR are relatively new and practitioners developing leading practices are seeking interaction with their peers and the SLR science community. To address these gaps, we co-produced online global workshops with sixty-nine practitioners from twenty-six countries. These …

Resilient Education Facilities With Special Focus On Classrooms To Be Compatible With The Covid-19 Crisis, Gehan Nagy, Gehan Nagy, Khaled Dewidar, Omar Atef A

Architectural Engineering

In recent months, the World Health Organization (WHO) expressed concern about the spread of a new pandemic after the COVID-19 pandemic, which had a significant impact on education. UNICEF says Over 168 million children’s classrooms around the world have been shuttered. Therefore, the main aim of this study is to identify the criteria and requirements of resilient design for classrooms to avoid closures during crises. Researchers have addressed the relationship between spaces and the spread of viruses inside them, so the research assumes that there is a relationship between the design criteria of classrooms and the spread of viruses inside …

The Impact Of American Kitchen Time-Use On Urban Design And Planning: A Case Study Of Baton Rouge, Louisiana, Farshid Torabian

LSU Doctoral Dissertations

Over the past century, the global environment has undergone significant changes, characterized by rising temperatures and a sharp increase in greenhouse gas emissions. Parallel to these environmental shifts, the U.S. has witnessed a tripling in energy demands, underscoring the pivotal role of household consumption in the nation's carbon footprint. Within this context, the kitchen, an integral component of the American home, becomes a focal point. Given that Americans predominantly spend their time indoors, it is imperative to understand the dynamics of kitchen usage and its broader implications on energy consumption and environmental impact. To delve into this complex interplay, this …

Characterization Of Alkali-Silica Reaction (Asr) Products And C-S-H Using Swir Spectroscopy For Nondestructive Detection Of Asr, Pengfei Ma, Wenyu Liao, Ying Zhuo, Hongyan Ma, Yanping Zhu, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study explores the feasibility of characterizing alkali-silica reaction (ASR) products and calcium silicate hydrates (C-S-H) from short-wave infrared (SWIR) spectroscopy. ASR products and C-S-H samples with different Ca/Si ratios were synthesized and analyzed through XRD, 29Si nuclei magnetic resonance (NMR) and SWIR spectroscopy. Fourier-transform infrared spectroscopy (FTIR) was collected to help interpret the results from the SWIR spectroscopy. The obtained spectroscopic features were applied to quantify the ASR product abundance denoted by the length expansion of mortar bars after an accelerated ASR test. The results show that the SWIR spectra of the synthetic ASR gels are similar regardless of …

Evolution Of Sbs-Modified Asphalt Performance Under Aging And Rejuvenation Cycle Conditions, Ke Shi, Feng Ma, Jenny Liu, Zhen Fu, Ruimeng Song, Dongdong Yuan, Aboudou Wassiou Ogbon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Improving the poor long-term service performance of rejuvenated SBS-modified asphalt (REF-LT) is highly challenging. In this study, a blend of aged and virgin binders was used to rejuvenate REF-LT and the evolution of the asphalt performance was observed during regeneration and reaging processes. An SBS-modified asphalt (SBM) and base asphalt (BA) were mixed with REF-LT in specified ratios to prepare SBM- and BA-rejuvenated asphalts. The rejuvenated asphalts were subjected to short- and long-term aging. The high/low-temperature rheological properties, fatigue resistance, rejuvenation mechanism, and changes in the functional groups of the rejuvenated and reaged asphalts were characterized using a dynamic shear …

Numerical And Experimental Investigation Of Negative Stiffness Beams And Honeycomb Structures, Yasser Darwish, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Metamaterial structures that exhibit negative stiffness (MSNS) behavior have shown the potential to be used as energy dissipation systems in different applications. Negative stiffness honeycomb structures consist of multiple pre-buckled beams that snapping through from one pre-buckled mode to another buckled mode, when subjected to transverse loads, displaying negative stiffness, and dissipating a significant portion of the input energy. This paper presents finite element models (FEMs) developed to investigate the performance of negative stiffness pre-buckled beams and honeycombs. The FEMs were validated using experimental results of single pre-buckled beams and honeycomb structures. The experimental testing of the pre-buckled beams was …

Going Airborne: Kent State's Pioneering Leap Into Integrated Advanced Air Mobility, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

This proposal centers on the development of a Concept of Operations in Advanced Air Mobility (AAM). Kent State University's College of Aeronautics and Engineering is poised to pioneer the integration of drones and electric Vertical Takeoff and Landing (eVTOL) systems, bridging the gap between its campus and airport by transporting students and faculty the 3NM distance from campus to the airport and back by a UAV. Beyond a standard research initiative, this proposal signifies a groundbreaking effort to reshape the landscape of educational aeronautics and Advanced Air Mobility and Urban Air Mobility. Our overarching goal is to transcend conventional boundaries …

The Problem Of Communication Of The Sign And Symbol In The Design Of The Brand In Society: The Differences Resulting From Forgery And Imitation (Analytical Study), Sattar Al-Juboori

The research problem focused on studying the consequences of communicating through signs and symbols in the context of the current world, given the huge amount of diverse industrial and commercial products and the challenges related to distinguishing those products. The research aims to find out the problem of perception of the sign and symbol in the designs of logos and trademarks for the consumer, the role that the sign or symbol plays in the symbolic representation of the consumer, and the desires and motivations that the brand raises for the consumer in the purchasing process. The research community is limited …

Retraction Of Numerical Modeling Of An L-Shaped Very Stiff Concrete Retaining Wall, Mej Editorial Board

Mansoura Engineering Journal

This is a Retraction note

A Comparative-Analytical Based Approach To Improve Energy Efficiency In Office Buildings, Ahmed Mohamed Thabet Alieldin, Raghda Abdelwahab Othman

Mansoura Engineering Journal

Green Building Rating Systems (GBRSs) have spread worldwide to evaluate how buildings are related to sustainability criteria. On one hand, leadership in Energy and Environmental Design [1] was recognized to be one of the most prominent rating systems in all over the world. LEED gives importance to the energy category by giving it the highest weighting score. On the other hand, the Egyptian Green Pyramid Rating System (GPRS) has been established to expand the construction of green buildings in Egypt. The governmental codes, policies and strategies in Egypt play the main role in improving several codes in the …

Synergistic Effect Of Macro Synthetic Fiber And Shrinkage-Reducing Admixture On Engineering Properties Of Fiber-Reinforced Super-Workable Concrete, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to enhance fiber-reinforced super-workable concrete (FR-SWC) by optimizing the system of shrinkage-reducing admixture (SRA) and macro-synthetic fiber (MSF) for low shrinkage and uncompromised mechanical properties. A factorial design approach was employed to model the effect of fiber content, SRA dosage, and combined ratios of two types of MSF on performance of FR-SWC. MSF content had the greatest impact on mechanical properties, followed by SRA and MSF combination. Using MSF increased equivalent flexural strength ratio by 310% compared to the control mixture, regardless of MSF combination and SRA. SRA had the most significant effect on drying shrinkage, followed …

From Pumping To Deposition: A Comprehensive Review Of Test Methods For Characterizing Concrete Printability, Ali Fasihi, Nicolas A. (Ali) Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D concrete printing (3DCP) technology has gained significant attention in the construction industry due to its potential to revolutionize the way buildings are designed and constructed. However, successful application of 3DCP requires robust standard test procedures to characterize the printability of concrete. Printability is a measure of workability for a printing material in the 3DCP process, which is characterized by pumpability, extrudability, and buildability. This paper presents a comprehensive review of the test methods that could be used for material characterization during various printing steps, including pumping, extrusion, and layer deposition. The underlying mechanisms relevant to each step, key governing …

The Charge Forward: An Assessment Of Electric Vehicle Charging Infrastructure In New York City, Christopher S. Cali

Dissertations, Theses, and Capstone Projects

The federal and local New York City (NYC) governments are actively promoting Electric Vehicles (EVs). This capstone project assesses the state of EV charging infrastructure in NYC and its readiness for EV growth. NYC faces unique challenges due to its dense population and limited space for infrastructure. There's a significant disparity between the number of gas pumps and fast EV chargers in the city, with only 170 Level 3/DC (Direct Current) Fast Chargers publicly available. These Level 3 chargers are most important because they can charge an EV in 15 minutes; Level 2 chargers, also considered in the analysis, take …

Evolvement Of Excusable Delay Clauses In Government Contracts Since The Covid-19 Pandemic, Jung Hyun Lee, Yunping Liang, Seyed Mohammad Ehsan Tabatabaee, Bryce Riccitelli

Durham School of Architectural Engineering and Construction: Faculty Publications

Excusable delay clauses in government construction contracts, often considered boilerplate with minimal modifications, have increased in attention since the outbreak of COVID-19. Despite the studies enumerating triggering events of the clause in the background of the pandemic, it is necessary to capture insights into how the unprecedented event is systematically accommodated by contract languages. The overarching goal of this study is to identify changes in contract languages over the pre-and post-pandemic eras by state departments of transportation (DOTs), focusing on excusable delay clauses. This study conducts a content analysis and a comparative analysis of state DOT construction contract documents, including …

The Juan De La Cruz Molino: Folk Architecture At El Güique-Estaca New Mexico, José A. Rivera Ph.D

Faculty Publications

El Güique and Estaca are twin communities just north of the confluence of the Río Grande and the Río Chama. Like other Spanish colonial settlements in the historic Río Arriba, acequia-based agriculture was essential for food production in this high desert region of the northern Río Grande. Along with the construction of acequias, molinos (grist mills) were built to grind wheat into flour as part of the subsistence farming economy of the times. While acequias were communal, molinos most often were constructed and operated as private enterprises by local millers like the case of Juan de la Cruz Borrego and …

A Municipal Modernity: Women, Architecture, And Public Health In Working-Class New York, 1913–1950, Jessica Fletcher

Dissertations, Theses, and Capstone Projects

“A Municipal Modernity” is the first study to analyze the architectural history of the district health centers in New York City that women reformers and their allies founded to address poor health in working-class communities. It reveals that women’s philanthropic adaptive re-use was foundational to the architecture of the public health care in New York and led to a program of municipal district health centers. Philanthropic reformers adapted buildings in the 1910s and 1920s to provide affordable health care for low-income women and children in European immigrant and Black neighborhoods. During the New Deal, municipal officials followed the example set …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …