Architectural Engineering Commons^™

Acoustic Management Of Library Fishbowls, Zachary J. Lilley

Materials Engineering

The purpose of this project is to aid the Cal Poly Robert E. Kennedy library in modifying the “fishbowl” study spaces to more effectively maintain the desirable sound that is generated within the fishbowls while avoiding the entrance and exit of excess noise to and from the fishbowls. A collaboration between the Materials Engineering Department and the Architecture Department provided the combined expertise needed to design, test, and install a prototype acoustic treatment in fishbowl 216-R in consultation with the Cal Poly Library as the voice of the customer. The fishbowl’s undesirable acoustic properties can be attributed to the hard …

Measuring Building Substructures: Solutions To ‘First Year’ Introductory Level Examination Questions, Tony Cunningham

Other Resources

The measurement of substructure works to simple domestic type buildings is a logical starting point for students to commence the process of taking-off building quantities. Substructure work is typically the first class of work to be explained in textbooks dealing with both construction technology and building measurement. However, substructure work is often one of the most challenging elements to measure. In this paper, the author demonstrates the process of measuring basic substructure designs. The approach involves providing solutions to a sample of four Irish Department of Education Technological Certificate: Builders’ Quantities Intermediate Stage examinations. The intention is to demonstrate how …

Theoretical Study Of Two States Reactivity Of No Activation On Iron Atom, Xiaoman Wang, Yaxin Su, Wenyu Liao, Wenyi Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The mechanism of Fe+NO was calculated by the Density Functional Theory (DFT) with the B3LYP methods combined with the 6-311+G (d, p) basis set. The geometry of reactants, transition states, intermediates and products of two reaction systems were completely optimized, and all the transition states were verified by the vibration analysis and intrinsic reaction coordinate (IRC) calculations. The "Two State Reactivity (TSR)" was used to analyze the reaction mechanisms; Results showed that the reaction system preferentially involves low-spin state entrance channel and the high-spin state exit channel. In the reaction channel, the crossing point appears, which would effectively reduce the …

Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack

Conference papers

ABSTRACT: Thermal mass indicates the ability of a material to store and release heat and is a function of the heat storage capacity of a material. The thermal mass of construction materials can be used to reduce the energy required for heating and cooling buildings. The heat storage capacity of concrete can be increased by incorporating phase change materials (PCMs) into the concrete and hence providing additional latent heat storage capacity. Research was carried out to compare the thermal behaviour of two different types of PCM/concrete composite panels. The first type of panel was formed by adding microencapsulated paraffin to …

Methamphetamine Absorption By Skin Lipids: Accumulated Mass, Partition Coefficients, And The Influence Of Fatty Acids, K. Parker, G. Morrison

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Occupants of former methamphetamine laboratories, often residences, may experience increased exposure through the accumulation of the methamphetamine in the organic films that coat skin and indoor surfaces. The objectives of this study were to determine equilibrium partition coefficients of vapor-phase methamphetamine with artificial sebum (AS-1), artificial sebum without fatty acids (AS-2), and real skin surface films, herein called skin oils. Sebum and skin oil-coated filters were exposed to vapor-phase methamphetamine at concentrations ranging from 8 to 159 ppb, and samples were analyzed for exposure time periods from 2 h to 60 days. For a low vapor-phase methamphetamine concentration range of …

Lifelong Housing Design: User Feedback Evaluation Of Smart Objects And Accessible Houses For Healthy Ageing, Matteo Zallio, Niccolò Casiddu

Conference Papers

According to the latest research by the European Community and ISTAT (Italian National Institute of Statistics) surveys, Europe has the highest average age for its population. According to those data, in the near future, it could be necessary to move from a welfare model based on the centralization of care systems, to a system based on the distribution of certain healthcare facilities [1]. This means that the ageing population is ever increasing, thanks to better lifestyles, innovative medical care and wider access to different services. This work seeks to observe and analyse key implications of architectural and interior design features …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

The Experiment And Analysis Of Active Mechanisms For Enhancing Heat And Mass Transfer In Sorption Fluids, Ziqi Shen

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This project was funded by American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE RP-1462). It is a three years’ research, including the literature review, labs construction, experiments and data analysis.

In this thesis, first of all, we conducted literature review of mechanism motion influence on heat and mass transfer and additive effect in absorption chiller. This part helps us understand the basic idea of how mechanism motion affects the heat and mass transfer of sorption fluids and gives us reference on how to select the experiment instrument and the experiment operation range.

In the second part, the instrument selection …

3 E’S Enterprise Architecture Framework (That Encompasses Business Process, Information Systems, And Information Technology), Nicholas C. Bucciarelli Mr.

Articles

No abstract provided.

Inquiry-Based Learning To Explore The Design Of The Built Environment, Anahid A. Behrouzi, Daniel Kuchma

Architectural Engineering

Typically in introductory structural engineering courses with a lab component, the instructional approach is to present the underlying theory via pre-lab lecture/reading and subsequently have students conduct guided experiments that affirm that theory. The new Fall 2015 course offering described in this paper takes the reverse approach where students’ hands-on exploration of a concept occurs prior to formal instruction. As such, the course is based upon Da Vinci’s perspective that: “[i]n the examination of physical problems I begin by making a few experiments,…we must commence with experience, and strive by means of it to discover truth.”

In the course, student …

Enhancing An Upper Division Structural Dynamics Course Using K'Nex Toys, Allen Estes, Cole C. Mcdaniel, Alec Roberto Zavala

Architectural Engineering

K’nex toys consist of various plastic rods and connectors cleverly-sized to allow the creation of a variety of structures. While the K’nex Corporation focuses on the K-12 market, there are a myriad of engineering applications that have been demonstrated at the university level. Many of these occur at the lower division level in freshman experience courses or introductory statics courses. Other applications have included constructing structural models for structural design and capstone courses. This paper takes this use of classroom technology even further by demonstrating how K’nex pieces can be used effectively in an upper-division, highly technical structural dynamics / …

Physical Artifacts In Introductory-Level Reinforced Concrete Design Instruction, Anahid A. Behrouzi

Architectural Engineering

Incorporating physical models and demonstrations in the introductory-level reinforced concrete design course has shown to be beneficial for students in clarifying and engraining fundamental concepts. The research study conducted at the author’s university during Spring 2015 involved the design, fabrication, and implementation of models to supplement traditional lectures on topics that students have found challenging in prior offerings of the course. Specifically, these demonstration tools illustrate:

• Three-dimensional stress blocks for rectangular/flanged beams subjected to varying levels of flexural demand • Distinctions between the flexural behavior of one and two-way slabs • Placement of steel reinforcement for singly/doubly reinforced beams …

Accreditation Insights And The Next Body Of Knowledge, Allen Estes, Thomas A. Lenox, Kenneth J. Fridley, Richard O. Anderson P.E.

Architectural Engineering

The American Society of Civil Engineers (ASCE) published the second edition of the Civil Engineering Body of Knowledge (BOK2) in 2008 expanding the knowledge, skills and attitudes required of future civil engineers. There were major changes to the BOK2 as the number of expected outcomes increased from 15 to 24 and the cognitive level of attainment was more precisely defined. A major implementation and enforcement mechanism for the BOK is the ABET accreditation criteria which includes both general criteria 3 and 5 and the discipline-specific program criteria. Of those, the program criteria are the easiest to change.

In 2013, ASCE …

Significance Of Parameters Affecting The Performance Of A Passive Down-Draft Evaporative Cooling (Pdec) Tower With A Spray System, Daeho Kang, Richard K. Strand

Publications and Research

PDEC towers with spray systems are known to achieve substantial energy savings. Various parameters such as the wet-bulb depression, the tower height, and the wind speed have been known to be key factors affecting the performance of the system. To date, the significance of these parameters and other important factors have not been adequately treated in the literature. There also has been a lack of models that can successfully investigate potential benefits of the system under various conditions where this particular system could be applicable. To address these critical issues, this study performed a parametric analysis by using a FLUENT …

On The Flux Richardson Number In Stably Stratified Turbulence, Subhas K. Venayagamoorthy, Jeffrey R. Koseff

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The flux Richardson number Rf (often referred to as the mixing efficiency) is a widely used parameter in stably stratified turbulence which is intended to provide a measure of the amount of turbulent kinetic energy k that is irreversibly converted to background potential energy (which is by definition the minimum potential energy that a stratified fluid can attain that is not available for conversion back to kinetic energy) due to turbulent mixing. The flux Richardson number is traditionally defined as the ratio of the buoyancy flux B to the production rate of turbulent kinetic energy P. An alternative generalized definition …

Architectural Response To Humanitarian Crises, Gul Nabi Afridi

Center for Rebuilding Sustainable Communities after Disasters Publications

Humanitarian design has become a popularized phenomenon in recent years, and it comes in all shapes and sizes. Humanitarian architecture basically means architecture designed for those in need. It is “seeking architectural solutions to humanitarian crises and bringing professional design services to communities in need.” Mostly, Humanitarian crises comes into account due to disasters either natural or human induced disaster. Any community which has been disturbed due to any disaster, having basic unstabilities like physical and social. These issues are further sub-categorized as, lives, properties, psychological, economic and education issues. Darra Adam Khel is a region which has been affected …

Structural Calculations For Tia Ana's Sustainable Development, Danielle Rustagi

Architectural Engineering

Tia Ana’s Sustainable Development is located in the El Salvadorian countryside, just outside of the capital city San Salvador. Currently, Tia Ana’s is located in the city of San Salvador, where there is little room for the children and a significant amount of violence and instability. In order to make the relocation of the orphanage feasible financially, a portion of the countryside landscape will contain a small hotel and numerous small dwellings nested in the tropical surroundings. By relocating the orphanage to the countryside, the children housed by Tia Ana will experience a safer and more stable environment and this …

Structural Calculations For Nepal Vocational Learning Center, Nicholas Petrarca

Architectural Engineering

This project goal is to build a Leadership Vocational School for youth, women, differently abled, and local leaders of rural and Kathmandu Nepal. The client for this project is an organization called Sakcham Rural Nepal and they partnered with a humanitarian organization called Journeyman International to find Architecture and Architectural Engineering students to design a safe, attractive and functional building to fit their needs.

Commercial Vertical Farm Design Phase 1, Tyler Tappin, Bryan Gomes

Architectural Engineering

Until recent years, vertical farming, or urban agriculture, has usually been referred to as more of a science fiction concept than a realistic means of production. However, it is becoming increasingly apparent that these urban crop­growing structures are not only technologically feasible, but efficient. These structures are entering the realm of economic feasibility as well, appearing in niche markets near large cities. Most of the facilities, however, are generally restricted in size to single­story buildings. The objective of this project was to design a multi story structure that would be well­equipped to house a large vertical farming operation. Some of …

Shell House Evaluation, Michael Bauer

Architectural Engineering

The Shell House has been a wonder of Poly Canyon's Experimental Laboratory for over 50 years. The structure was built in 1964, at a time when these experimental structures were being encouraged in the canyon. This report is an evaluation of the seismic performance of the Shell House in an effort to understand new modeling techniques. The evaluation utilizes these computer programs to map the complex geometry of the Shell House.