Architectural Engineering Commons^™

Contractor's Claims Under The Riai Form Of Contract - A Lecture Presentation, Tony Cunningham

Other Resources

Contractors’ claims for loss and expense have long been a contentious issue on many building contracts. Contractors’ claims for additional money arise where the actions or failings of the Employer and/or its agents delay or disrupt the Contractor’s regular progress of the works and cause the Contractor to suffer unexpected loss and/or expense in performing its contract.

These lecture presentation notes examine the topic of contractors’ claims for reimbursement of loss and expense under the Irish 2017 RIAI ‘Yellow’ Form of Contracts. The presentation outlines the grounds on which a claim for compensation may be made under this contract and …

Compensation Claims Under The Irish Pw-Cf1 Form Of Contract, Tony Cunningham

Other Resources

Contractors’ claims for loss and expense have long been a contentious issue on many building contracts. Contractors’ claims for additional money arise where the actions or failings of the Employer and/or its agents delay or disrupt the Contractor’s regular progress of the works and cause the Contractor to suffer unexpected loss and/or expense in performing its contract.

These lecture presentation notes examine the topic of compensation claims under the Irish 2019 v2.4 Public Works PW-CF1 Form of Contract. The presentation outlines the grounds on which a claim for compensation may be sought under this contract and outlines the administrative procedures …

The Project Management Of Investigating Dowel Laminated Timber, Sophia D. Looney, Bryan U. Garcia, Reiley A. Akkari

Architectural Engineering

During the Winter Quarter of 2020, three Architectural Engineering students investigated a new type of timber product, dowel laminated timber, for their senior project. Dowel laminated timber (DLT) is a specialty product typically associated with sustainable design and is a form of mass timber. The three students had little knowledge about mass timber outside of a timber design course; their knowledge was primarily in wood framing design. Therefore, the topic was chosen because dowel laminated timber is a topic that holds a large learning opportunity not only for the students but also for the profession. The purpose of the senior …

Blue Mountain Residence, Marin Kira Govett

Architectural Engineering

The Blue Mountain Residence is a new, single family residence located in Jefferson County, Colorado, a suburb of Denver. It is located close to the front range at an elevation of 7,600 ft. The owner and architect of the residence is Cherie Goff of HMH Architecture in Boulder, Colorado. The house is mostly of wood construction with elements of steel and concrete. The structural project team includes a Cal Poly architectural engineering student and professional engineers in DLK Engineering in Lafayette, CO. This report contains the complete project description, structural design calculations, and stamped structural construction drawings. The report examines …

Establishing An Information System For Documenting Valuable Buildings By Using Gis In Egypt, Mona Mahrous Abdel Wahed

Emirates Journal for Engineering Research

Valuable heritage buildings are the history of nations, and history forms the identities of these nations. Many of these buildings are exposed to deterioration, destruction and distortion. Therefore, it is essential to protect and maintain these buildings to protect history. Effective documentation of valuable buildings is necessary to guide and assist stakeholders in making decisions regarding valuable buildings. Documentation requires robust and scientific methods. Therefore, it is important to utilize new technology in general and geographic information system GIS in particular in documenting valuable buildings. GIS has the potential to contribute and deal with valuable buildings at various stages and …

Dislocation-Oxide Interaction In Y2o3 Embedded Fe: A Molecular Dynamics Simulation Study, M. Mustafa Azeem, Qingyu Wang, Zhongyu Li, Yue Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide dispersed strengthened (ODS) steel is an important candidate for Gen-IV reactors. Oxide embedded in Fe can help to trap irradiation defects and enhances the strength of steel. It was observed in this study that the size of oxide has a profound impact on the depinning mechanism. For smaller sizes, the oxide acts as a void; thus, letting the dislocation bypass without any shear. On the other hand, oxides larger than 2 nm generate new dislocation segments around themselves. The depinning is similar to that of Orowan mechanism and the strengthening effect is likely to be greater for larger oxides. …

Timber-Strong Design Build Competition, Anna Luehrs, Lilliann Lai, Dolores Herrera, John Leone

Architectural Engineering

The November 2019 Timber-Strong Design Build Competition, hosted by National Council of Structural Engineers Association (NCSEA), was developed by the American Wood Council (AWC), Simpson Strong-Tie Company Inc. (SST), and APA - The Engineered Wood Association (APA) to cultivate timber design, building, and sustainability experience for students. Participating students gained exposure to performance analysis, construction management, building practices, and project bid preparation while practicing as a design construction firm. In the process of this hands-on experience, students were expected to procure all building materials and tools themselves with some aid from sponsors. The goal of the competition was to provide …

The Bridge Newsletter Spring 2020, Missouri University Of Science And Technology

The Bridge Newsletter

-Studying fabrics, materials for facemasks
-New Missouri construction consortium
-Showalter honored by AGC
-New transportation center

Chronic Traumatic Encephalopathy And The Built Environment, Dak Kopec, Kendall Marsh

Architecture Faculty Research

© 2020, Faculty of Engineering, Universitas Indonesia. All rights reserved. Traumatic Brain Injuries (TBIs) are often connected to the development of Chronic Traumatic Encephalopathy (CTE), a degenerative brain disease commonly found in athletes, military veterans, and others that have a history of repetitive brain trauma. This formative exploratory study looked at person-centred design techniques for a person with CTE. The person-centred design method used for this study was based on a two-tiered reductionist approach; the first tier was to identify common symptoms and concerns associated with CTE from the literature. This information provided specific symptoms that were addressed through brainstorming …

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

Investigating Multidimensional Characteristics Of Noise Signals With Tones From Building Mechanical Systems And Their Effects On Annoyance, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper investigates multidimensional characteristics of tonal noise from heating, ventilation, and air-conditioning systems, besides loudness and tonality, to improve prediction of annoyance. Two studies were conducted: multidimensional scaling (MDS) analysis to determine what other perceptual signal characteristics are important and perceptual weight analysis (PWA) to understand the impact of multiple tones in a signal. In the MDS study, paired comparison tasks were conducted to gather similarity and annoyance data. Results show that the latent perceptual dimensions are related to the signal’s tonality, loudness, sharpness, and roughness. Including metrics for these perceptions, except roughness, improves the performance of earlier annoyance …

Influence Of Pumping Pressure On The Viscosity Curve And Rheological Stability Of Mortar Incorporating Polycarboxylate, Jae Hong Kim, Seong Ho Han, Byoung Il Choi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Concrete pumping has been successfully adopted in modern construction. Various concrete including high-strength concrete and self-consolidating concrete can be pumped, but we still have a lack of understanding of the rheological behavior and its change during the pumping process. This study evaluates the effect of pumping pressure on the viscosity curves of cement-based materials incorporating a specific polycarboxylate. The viscosity of mortar samples increases with the pumping pressure. The viscosity increase depends on the rate of shear strain and the polymer structure of the polycarboxylate. The effect of pumping pressure is then generalized with a Sisko model. A mechanistic model …

Impact Of Ambient Stable Stratification On Gravity Currents Propagating Over A Submerged Canopy, Jian Zhou, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The structure and propagation of lock-release bottom gravity currents in a linearly stratified ambient with the presence of a submerged canopy are investigated for the first time using large-eddy simulations. The canopy density (i.e. The solid volume fraction), the strength of ambient stratification and the canopy height are varied to study their respective effects on the gravity current. Both denser canopies and stronger ambient stratification tend to switch the horizontal boundary along which the current propagates from the channel bed towards the canopy top (i.e. The through-To-over flow transition). It is found that the dilution of the current density is …

Safety Design Management Processes To Mitigate Design Errors, Hernan Guadalupe

Walden Dissertations and Doctoral Studies

Some organizations lack processes to mitigate design errors that may result in potential accidents or loss of life during building construction. Managers are concerned about preventing injuries and accidents, which may promote safer working conditions during construction. Grounded in the transformation-flow-value theory of production, the purpose of this qualitative single case study was to explore safety design management processes that managers use to mitigate errors. The participants included 7 members from 1 design firm with business operations in the United States northeastern region. Data were collected from semistructured interviews and company document reviews. Data were analyzed using Yin's 5-phase, where …

Peak Pressures On Low Rise Buildings: Cfd With Les Versus Full Scale And Wind Tunnel Measurements, Aly Mousaad Aly, Hamzeh Gol-Zaroudi

Faculty Publications

This paper focuses on the processes of wind flow in the atmospheric boundary layer, to produce realistic full-scale pressures for the design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g. COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD …

Impact Of Bi-Directional Loading On The Seismic Performance Of C-Shaped Piers Of Core Walls, Anahid A. Behrouzi, Andrew W. Mock, Dawn E. Lehman, Laura N. Lowes, Daniel A. Kuchma

Architectural Engineering

Reinforced concrete structural walls are commonly used as the primary lateral load resisting system in modern buildings constructed in high seismic regions. Most walls in high-rise buildings are C-shaped to accommodate elevators or other architectural features. C-shaped walls have complex loading and response including: (1) symmetric response in the direction of the web, (2) asymmetric response in the direction of the flange and (3) high compression and shear demands when used as a pier in a coupled-wall configuration. A research study was conducted on C-shaped walls tested under (1) uni-directional and (2) bi-directional loading of an isolated walls and (3) …

Space In Transition: A Design Exploration Of A Transition Space In Ban Plainern, Tengzhou Feng

Chulalongkorn University Theses and Dissertations (Chula ETD)

This thesis concerns a methodology to study transition spaces in traditional Thai houses. The author questions how to inherit and develop traditional architecture for the future generations. Transition spaces of Thai houses are chosen as the places to observe how materials, proportions, spatial compositions, light, shade and shadow affect architecture itself. They represent a relationship between man-made and nature with respect to environment, culture and time. Literature reviews are a supplement to the analytical methods to study architectural spaces and forms of Colin Rowe, Peter Eisenman, Le Corbusier and Juhani Pallasmaa. Then, the methodology is applied to analyse two case …