Architectural Engineering Commons^™

Cement-Based Materials With Solid-Gel Phase Change Materials For Improving Energy Efficiency Of Building Envelope, Zhuo Liu, Jiang Du, Ryan Steere, Joshua P. Schlegel, Kamal Khayat, Weina Meng

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This paper evaluated the cement-based materials incorporated with novel solid-gel phase change materials (PCMs) for improving the energy efficiency of building envelopes. This novel PCM is form-stable, which will not leak as solid-liquid PCMs do and not need encapsulation, and it features high energy-storage capacity. Experimental results showed that the thermal properties of cement-based materials were improved as the increase of PCM content. A 30% replacement of sand by volume with PCM can increase the latent heat of the mixture from around 0 to 7 J/g and decrease the thermal conductivity of PCM mortar based on the generalized self-consistent (GSC) …

Continuous Time Recurrent Network For Human Activity Detection, Abdallah Al Zubi

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Human activity detection is crucial to personalize the control of the building environment. For example, understanding certain human activities (e.g., walking, sitting, etc.) for an occupant in a building helps provide the proper thermal comfort control. However, these applications require large-scale neural networks that are challenging to implement and train.

In this thesis, we implemented a continuous-time recurrent neural network implementation (CTRNN) network that can solve real-time human activity detection with a smaller-size network. The CTRNN uses differential equations with a time constant to describe the neuron equations. It was implemented and trained for the first time using TensorFlow. Specifically, …

Classifying Diseases Affecting Gait With Body Acceleration-Based Machine Learning Models, Mohammad Ali Takallou

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This Ph.D. dissertation introduces a comprehensive framework designed to harness acceleration data as a uniquely valuable tool for early disease classification, specifically focusing on gait-related diseases. In the modern healthcare landscape, timely and accurate classification of such diseases is paramount, as it can significantly impact treatment outcomes and patient quality of life.

As a compelling case study, we conducted a meticulous experiment to identify individuals afflicted with peripheral artery disease (PAD) and classify them from those without PAD. Our framework leverages acceleration data extracted from strategically placed anatomical reflective markers, including locations such as the sacrum, to train sophisticated classification …

Active And Visual Methods For Teaching Nonrectangular Reinforced Concrete Beams, J.Chris Carroll, Anahid Behrouzi, Karl F. Meyer

Architectural Engineering

Nonrectangular cross sections are a common occurrence in reinforced concrete design typically taking the form of flanged beam sections, circular columns, and square or rectangular columns subject to biaxial bending. Instructors typically introduce the theory behind nonrectangular beams using two-dimensional sketches of flanged sections. Students can struggle to visualize the examples when presented in two dimensions; deciphering the multiple resultant compressive forces and their corresponding moment arms are particularly difficult. This paper presents an overview of nonrectangular beam theory and select active learning methods along with three specific examples used by the authors to teach nonrectangular beams in an undergraduate …

Assessing Asset Management In Aec/Fm: Unveiling Limitations And Advancing Solutions With Digital Twin, Abdelmoneim Mohamed Abdelmoti

Theses

In recent years, the concept of Digital Twins (DTs) has emerged as a transformative technological innovation with the potential to revolutionize asset management practices. A Digital Twin is a digital representation closely linked to a physical entity, enabling bidirectional information exchange and data-driven decision-making. Within the realm of Architecture, Engineering, and Construction/Facilities Management (AEC/FM), DTs offer a diverse array of applications for enhancing asset management.
/="/">This thesis aims to demystify the concept of DTs and explore their existing applications in asset management, particularly within the AEC/FM industry. To achieve this, the research employs a two-fold approach: a systematic review …

Meta-Analysis Of Insulated Concrete Wall Panel Design Methods For Shear And Flexure Behavior, Maryam Al-Bayati

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Insulated Concrete wall panels have been designed and constructed since the early 1950s with various shear ties, dimensions, and methods; nonetheless, thermal bridging and rational design are still a concern. Many companies have recently developed plastic connectors that have gradually replaced solid concrete sections and steel connectors due to their superior thermal efficiency and strength. However, there is no generally accepted method for predicting the behavior of sandwich wall panels in structural engineering practice or codes, but many methods have been used since the early 1920. This study aims to evaluate the accuracy of current methods for predicting the flexural …

Effect Of Type And Quantity Of Inherent Alkali Cations On Alkali-Silica Reaction, Pengfei Ma, Jiaoli Li, Jincheng Bai, Ying Zhuo, Lingyu Chi, Yanping Zhu, Zhenhua Shi, Hongyan Ma, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the macroscopical expansion induced by alkali-silica reaction (ASR) and its corresponding ASR products are investigated using ordinary Portland cement (OPC) mortar specimens with a gradient of boosted alkalis. Experimental results show that the expansion increases with the concentration of inherent alkalis. Sodium-boosted samples expand approximately three times as much as potassium-boosted samples. ASR gels that are present in aggregate veins are calcium-free and amorphous; the atomic ratios of ASR gels are nearly independent of the type and quantity of alkali cations. Aggregate ASR gel exudation occurs in high (≥2.5 %) sodium cases and produces potential Na-shlykovite. Crystalline …

Evaluation Of Residual Flexural Behavior Of Corroded Fiber-Reinforced Super Workable Concrete Beams, Jingjie Wei, Nima Farzadnia, Alfred Addai-Nimoh, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Effect of Macro Synthetic Fiber (MSF) Volume and Crack Widths on Corrosion of the Reinforcing Bars and Residual Flexural Behavior of Fiber-Reinforced Super-Workable Concrete (FR-SWC) Beams Exposed to Accelerated Corrosion. FR-SWC Beams Prepared with 0, 0.33%, and 0.66% MSF Were Pre-Cracked at 0.2-, 0.4-, and 0.75-Mm Widths Before Corrosion Testing. the Controlled Crack Width Was Initiated in One Set of Beams that Were Then Unloaded. the Crack Width Was Maintained for Another Set of Beams during Corrosion Testing by Inserting a Shim. Test Results Showed that the Use of 0.33% and 0.66% MSF Reduced Crack Development …

Investigating Bim Applications In Reducing Co2 Emissions In The Built Environment – Uae Context, Rua Ahmed Maali

Theses

Large amounts of CO₂ are released into the atmosphere throughout the life cycle of a building starting from the production of materials and products, in the construction phase of the building itself, in the site setting, the renovations, the later rehabilitation, and up to the final demolition. Hence, this thesis aims to investigate the potential of using Building Information Modeling (BIM) in making informed decisions that can help in reducing CO₂ emissions in the life cycle of built environment projects. This study has used a mixed method approach that includes literature review, a case study and semistructured interviews. …

Evaluation Of Feasibility And Performance Of Foamed Fire-Resistant Coating Materials, Anyou Zhu, Hanli Wu, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A preliminary study found high-performance cement mortar, geopolymer mortar, and magnesium phosphate cement mortar (MPCM) have the potential as new fire-resistant materials. In this study, foam was added to these three fire-resistant materials to further improve their rheological, mechanical, and fire-resistant performance and reduce costs. Systematic design and experimental programs were conducted. The results showed the addition of foam enhanced workability, adhesiveness, and fire resistance, allowing the materials to withstand higher temperatures and further delay heat transfer. A mixture of 70% MPCM and 30% foam was identified as the optimum design, which could withstand 1000 °C with low heat transfer …

Improving Rheological And Thermal Performance Of Gilsonite-Modified Binder With Phase Change Materials, Farshad Saberi K., Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Gilsonite, as a type of natural asphalt binder, has been used to improve the high-temperature performance of regular asphalt binders. However, the addition of Gilsonite may compromise binders' low-temperature thermal cracking resistance. In this research, polyethylene glycol (PEG), as one type of the phase change materials (PCMs), was used as an innovative material to balance the impacts of Gilsonite on high and low performance of asphalt binders. The dosages of Gilsonite and PEG were first determined based on the materials' rheological behaviors at low temperatures. The performance of the PEG-Gilsonite-modified binder was then fully evaluated in terms of the resistance …

Mixing Rates In Stably Stratified Flows With Respect To The Turbulent Froude Number And Turbulent Scales, Matthew R. Klema, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this analysis the quantification of diapycnal diffusivity Kρ in stratified flows such as those found in the ocean and atmosphere is explored. There are two simplifications that are routinely made when estimating mixing rates in stably stratified flows. First, a constant value is commonly assumed for the (irreversible) mixing coefficient Γ . Second, dissipation rates of turbulent kinetic energy ϵ are inferred using either the Thorpe (or Ellison) length scales or from microstructure measurements using the isotropy assumption. Data from three independent direct numerical simulations of homogeneous stratified turbulence are used as a testbed to highlight impacts of these …

Effect Of Rotation On Mixing Efficiency In Homogeneous Stratified Turbulence Using Unforced Direct Numerical Simulations, Matthew Klema, S. Karan Venayagamoorthy, Annick Pouquet, Duane Rosenberg, Raffaele Marino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Diapycnal (irreversible) mixing is analyzed using thirty direct numerical simulations (at 1024 ³ resolution) of homogeneous rotating stratified turbulence (RST) in the absence of imposed shear or forcing. The influence of varied rotation and stratification rates on the energetics (in particular the dissipation rates of kinetic and potential energies) is presented. Data is also analyzed within a new parametric framework, using the turbulent Froude and Rossby numbers Frt= ϵ/ Nk, Rot= ϵ/ fk, where k is the turbulent kinetic energy, ϵ its rate of dissipation, N the buoyancy frequency and f the Coriolis parameter. This framework is used to illustrate …

Mechanism Underlying Effect Of Expansive Agent And Shrinkage Reducing Admixture On Mechanical Properties And Fiber-Matrix Bonding Of Fiber-Reinforced Mortar, Kamran Aghaee, Taihao Han, Aditya Kumar, Kamal Khayat

Materials Science and Engineering Faculty Research & Creative Works

Expansive agent (EA) and shrinkage reducing admixture (SRA) are utilized to reduce shrinkage and risk of cracking in concrete. EA compensates shrinkage by initial expansion, and SRA reduces surface tension in the pore fluid. Although EA and SRA effectively reduce shrinkage, they can impair micro-structure of concrete at high contents. The shrinkage reduction effect of EA and SRA is well known; however, there is limited knowledge about their negative effect on microstructure and fiber matrix interfacial transition zone (ITZ). The current study explores the effect of using 10 % CaO-based EA, 2 % SRA, and their combination on mechanical, shrinkage, …

Preface: Special Issue On Turbulence And Mixing In Stratified Flows, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Rilem Tc 266-Mrp: Round-Robin Rheological Tests On High Performance Mortar And Concrete With Adapted Rheology—Evaluating Structural Build-Up At Rest Of Mortar And Concrete, Sofiane Amziane, Kamal Khayat, Mohammed Sonebi, Arnaud Perrot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Paper Presents the Results of a Round-Robin Testing Program Undertaken by RILEM TC-266-Measuring Rheological Properties of Cement-Based Materials in May 2018 at the Université D'Artois in Bethune, France. Seven Types of Rheometers Were Compared; They Consisted of Four ICAR Rheometers, Viskomat XL Rheometer, EBT-V Rheometer, Sliding Pipe Rheometer (SLIPER), RheoCAD Rheometer, and 4SCC Rheometer, as Well as the Plate Test. This Paper Discusses the Results of the Evolution of the Static Yield Stress at Rest of Three Mortar and Five Concrete Mixtures that Were Determined using Two ICAR Rheometers, Viskomat XL, and EBT-V Rheometers, as Well as the Plate …

Atomic Insights Into The Structural Properties And Displacement Cascades In Ytterbium Titanate Pyrochlore (Yb2ti2o7) And High-Entropy Pyrochlores, M. Mustafa Azeem, Qingyu Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Pyrochlore oxides ((Formula presented.) are potential nuclear waste substrate materials due to their superior radiation resistance properties. We performed molecular dynamics simulations to study the structural properties and displacement cascades in ytterbium titanate pyrochlore ((Formula presented.)) and high-entropy alloys (HEPy), e.g., (Formula presented.), (Formula presented.), and (Formula presented.). We computed lattice constants (LC) ((Formula presented.)) and threshold displacement energy (Ed). Furthermore, the calculation for (Formula presented.) and ionic radius ((Formula presented.)) were performed by substituting a combination of cations at the A and B sites of the original pyrochlore structure. Our simulation results have demonstrated that the lattice constant is …

Lean Thinking As An Approach For Improving Client Communication During The Design Process, Ayman Ahmed Ezzat Othman, Ghada N. Mossad, Nishani Harinarain

Architectural Engineering

Lean thinking is perceived as a successful strategy for saving time and cost, while improving at the same time the position in the market. Lean thinking is about eliminating waste and increasing the quality. When applied correctly, lean thinking is a well understood and well examined platform upon which to build firm practices. In the architectural profession miscommunication has a lot of consequences including time and cost overruns, conflict and ultimately project failure. The aim of this research was to investigate the role of lean thinking in improving the communication between the client and the architect during the design process. …

Common Ground Newsletter Fall 2023, Missouri University Of Science And Technology

Common Ground

- Free-Format Education

- S&T student selected as national ASCE ambassador

- Heart of a servant

- Exploring history, architecture of Chicago

Integrated Project Delivery (Ipd): An Innovative Approach For Achieving Sustainability In Construction Projects, Ayman Ahmed Ezzat Othman, Ghada Adel, Nishani Harinarain

Architectural Engineering

In spite of the positive impact construction can have on the economy and society in general, the industry is being blamed for the negative impact it has on the environment. This problem can be attributed to traditional procurement approaches adopted in construction industry and the inability to handle the different challenges regarding waste generation and pollution of the environment. This paper focused on the role of construction procurement as a method to achieving sustainability. This paper aims to investigate the role of integrated project delivery (IPD) in achieving sustainability in construction projects. In order to achieve this, aim the research …