Engineering Commons^™

Techno-Economic Analysis Of Protein Concentrate Produced By Flash Hydrolysis Of Microalgae, Alexander Nana Yaw Asiedu

Civil & Environmental Engineering Theses & Dissertations

Process simulation and techno-economic analysis of 95wt.% protein concentrate from microalgae has been performed using SuperPro Designer v. 9.0. This work, first of its kind, is focused on the economic analysis of protein concentrate that includes processes such as microalgae cultivation, harvesting, protein extraction and drying steps. A baseline capacity of 160 MT/day protein concentrate production on commercial basis has been analyzed. This throughput requires 336 MT/day dry algae (54 wt.% protein). The amount of carbon dioxide required to grow this quantum of algae is estimated to be 648 MT/day, which is produced from an in situ 21 MW power …

Multiple Point Constraint (Mpc)-Based Variable Node Super-Element, Mohamad Eftekharjoo

Mechanical & Aerospace Engineering Theses & Dissertations

The multiple point constraint (MPC)-based variable node element is introduced in this study to handle mismatched meshes between sub-domains in finite element analysis. The MPC-variable node element is a collection of a group of elements. The compatibility condition along the interface boundary is imposed along the edge of these elements through Lagrange multipliers. The Elimination method is then used to remove the effects of the dependent nodes in these elements to produce a single MPC-based variable node element. The derived variable node elements are applied to solve two plane strain problems in order to validate the accuracy of the proposed …

Using Eye And Head Movements As A Control Mechanism For Tele-Operating A Ground-Based Robot And Its Payload, Kathryn C. Hicks

Computational Modeling & Simulation Engineering Theses & Dissertations

To date, eye and head tracking has been used to indicate users' attention patterns while performing a task or as an aid for disabled persons, to allow hands-free interaction with a computer. The increasing accuracy and the reduced cost of eye- and head-tracking equipment make utilizing this technology feasible for explicit control tasks, especially in cases where there is confluence between the visual task and control.

The goal of this research was to investigate the use of eye-tracking as a more natural interface for the control of a camera-equipped, remotely operated robot in tasks that require the operator to simultaneously …

Employee Hr Connect Portal, Aparna Allusivala, Sindhura Reddy Mandadi, Sri Vidya Rani Mudunuri

All Capstone Projects

Employee HR Connect Portal is essential in order to track employee time, project time. This portal can be hosted on any java based web server or application server and will be accessible via web-browsers. This portal is very user- friendly. Employee HR Connect Portal will be a useful tool to identify supply and demand of human resources. We have three main modules to maintain records of employee, department and project. Employee HR Connect Portal is very helpful for auditing. Through this portal we can judge the potentiality of the employee.

All-In Sustaining Cost Analysis, Asseu Gilbert Yapo

Graduate Theses & Non-Theses

Cost reporting has focused on the direct cost of mining and processing ore which was summarized in the non-GAAP cash cost developed by the Gold Institute in 1996. In 2013, a group of mining companies, working with the World Gold Council, developed a more inclusive approach to reporting costs designed to solve the dilemma of showing a more comprehensive reflection of recurring costs involved in producing gold, without discouraging investors.

Modifying Fracture Conductivity Testing Procedures, Kent Blair

Graduate Theses & Non-Theses

Fracture conductivity testing is a measure of how proppant will perform downhole when injected. The current American Petroleum Institute (API) procedure for conductivity testing produces results that are difficult to replicate. In one case three commercial labs tested the same sample of proppant, the results varied between labs and the highest spread in data had an 80% variation (Anderson, 2013). The goal of this thesis is to investigate cell loading procedures that reduce the variation in laboratory results.

A variety of cell loading techniques were tested including Hoke cylinder injection, guar injection, and cell vibration. Hoke cylinder loading was determined …

Review Of Sampling And Evaluation Techniques For Diesel Exhaust Particulate Matter In The Mining Industry And The Application Of A Vapor Phase Organic Carbon Correction Factor, Ryley Bosch

Graduate Theses & Non-Theses

The health effects associated with diesel exhaust exposure have been documented for decades. However, methods used to assess diesel exhaust have experienced considerable revision over the past twenty years. The latest sampling methodology considers particulate matter elemental carbon (EC) and organic carbon (OC) analysis along with the vapor phase OC analysis. The objective of this study was to evaluate the influence of vapor phase OC on the current National Institute for Occupational Safety and Health (NIOSH) method 5040 sampling and evaluation techniques for diesel exhaust particulate matter.

A pilot study was conducted as part of a larger study evaluation biodiesel …

Investigating The Feasibility Of Nitrogen Injection In Turner Valley, Igor Koracin

Graduate Theses & Non-Theses

The Turner Valley gas and oil field was discovered in 1913 and it was one of the main plays that sparked the growth of the petroleum industry in Canada. The Turner Valley formation is a Mississippian reservoir located at a mean depth of 7,546 feet. It is a heavily faulted field, 25 miles in length with an average width of 2 miles and is located 30 miles south-west of Calgary. It is an asymmetric anticlinal structure cut by the y axis with parallel thrust and normal faults.

Due to its early inception and the lack of resource development regulations, Turner …

Using Star-Ccm+ To Evaluate Multi-User Collaboration In Cfd, Kasey Johnson Webster

Theses and Dissertations

The client-server architecture of STAR-CCM+ allows multiple users to collaborate on a simulation set-up. The effectiveness of collaboration with this architecture is tested and evaluated on five models. The testing of these models is a start to finish set-up of an entire simulation excluding computational time for generating mesh and solving the solution. The different models have distinct differences which test every operation that would be used in a general CFD simulation. These tests focus on reducing the time spent preparing the geometry to be meshed, including setting up for a conformal mesh between multiple regions in conjugate heat transfer …

Improving Response Characteristics Of Split Ring Resonators Using Experimental Designs, Omer Faruk Keskin

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this thesis is to investigate the application of design of experiments approaches in the analysis of split ring resonators, and to compare two different approaches. The design parameters of the meta-material device are examined to study all the main effects, the two factor interactions, and the curvature effects. A full factorial design and a central composite design is utilized for the study. The results in improving split ring resonator design are discussed.

This study shows that the design of experiments approaches can effectively be utilized to examine the effects on the response values of a specific type …

Numerical Studies And Optimization Of Magnetron With Diffraction Output (Mdo) Using Particle-In-Cell Simulations, Alireza Majzoobi

Electrical & Computer Engineering Theses & Dissertations

The first magnetron as a vacuum-tube device, capable of generating microwaves, was invented in 1913. This thesis research focuses on numerical simulation-based analysis of magnetron performance. The particle-in-cell (PIC) based MAGIC software tool has been utilized to study the A6 and the Rising-Sun magnetron structures, and to obtain the optimized geometry for optimizing the device performance. The A6 magnetron is the more traditional structure and has been studied more often. The Rising-Sun geometry, consists of two alternating groups of short and long vanes in angular orientation, and was created to achieve mode stability.

The effect of endcaps, changes in lengths …

A Risk Assessment Of The Impacts Of Coastal Flooding And Sea Level Rise On The Existing And New Pump Stations 113, Norfolk, Va, David A. Pezza

Civil & Environmental Engineering Theses & Dissertations

The author assessed the risk to a wastewater pump station and a planned replacement located nearby due to coastal flooding and rising sea levels. The locations for the pump stations are in the Larchmont neighborhood by the Lafayette River tidal estuaries in Norfolk, Virginia. The Lafayette River is a tributary to the Elizabeth River, which flows to the Chesapeake Bay. The low-lying areas along the river are subject to coastal surges caused by tropical and extra-tropical storms that flood the bay.

The region is considered one of the urban areas most exposed to the accelerating rate of rising sea levels. …

Synthesis, Characterisation, Electrochemical, And Spectroscopic Studies Of Cobaloximes: Unique Clues Of Cobalt(I) Species In Various Solvents, Michael John Celestine

Chemistry & Biochemistry Theses & Dissertations

With the dwindling amount of fossil fuels in the world’s reserve is said to run out in the future. The use of alternative fuels such as hydrogen can be produced from renewable sources. One source is the use of first row transition metal complexes that can harness the power of the sun to reduce protons to hydrogen. In this thesis we investigated a well-known hydrogen evolution catalyst in a quest to understand the behavior of different oxidation states that occur during the catalytic cycle.

In an attempt to synthesize a binuclear ruthenium(II) complex, [{Ru(phen)2}2{µmes(1,4-phO-Izphen)3}](PF6)4, as a possible photosensitizer for the …

Comparing Nutrient Recovery Via Rapid (Flash Hydrolysis) And Conventional Hydrothermal Liquefaction Processes For Microalgae Cultivation, Caleb Richard Talbot

Civil & Environmental Engineering Theses & Dissertations

Algal biofuels have the potential to provide a scalable source of renewable fuels in the near future. The high nutrient use in algae cultivation and its recovery and recycling is one of the challenges that may limit the scalability and sustainability of algal biofuels. The present study evaluates the use of Hydrolysate obtained after Flash Hydrolysis (FH) of Scenedesmus at 280 C as a nutrient source for microalgae cultivation. FH Hydrolysate nutrient recycling was compared with low temperature batch Hydrothermal Liquefaction (HTL) nutrient recycling. Oocystis and Scenedesmus were cultivated using Hydrolysate as a partial phosphorous (P) and nitrogen (N) source. …

Examining The Relationship Between Leadership Decision Making Styles And Personality Type Within The Department Of Defense, Antoine Lamont Prince Sr.

Engineering Management & Systems Engineering Theses & Dissertations

Leadership is perhaps the single most important function within the Department of Defense. While the old cliché “everyone is a leader regardless of position” may hold moral meaning, personnel in leadership positions are key. Under the umbrella of leadership is decision making. What leadership is to an organization, decision making is to leadership. Yet, despite this knowledge, unsound decisions are readily conducted. There are various theories as to why this holds true, one of which is personality type. Research however, shows that there is a limited amount of relevant knowledge to determine if there is in fact a …

An Approach For The Development Of Complex Systems Archetypes, Walter Lee Akers

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research is to explore the principles and concepts of systems theory in pursuit of a collection of complex systems archetypes that can be used for system exploration and diagnostics. The study begins with an examination of the archetypes and classification systems that already exist in the domain of systems theory. This review includes a critique of their purpose, structure, and general applicability. The research then develops and employs a new approach to grounded theory, using a visual coding model to explore the origins, relationships, and meanings of the principles of systems theory. The goal of the …

Dynamic Project Time And Cost Evaluation Under The Combined Influence Of Contract, Quality, And Uncontrollable Change, Thomas V. Hammock

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation proposes a method that quantifies the dynamics caused by disruptions due to multiple changes that can occur during the progression of a large scale project. To begin, equations consisting of multiple parallel event sequences are derived that define the relationship between individual process events and the final project completion time. Matrix notation and a precedence matrix concept are used in this derivation to produce equations that are best suited for computer programming applications. This relationship is the foundation upon which the equations are built to calculate the variation impact on each event of a large scale project. Pursuing …

Experimental And Predicted Behavior Of Frp Beam-Columns Including Retrofitting, Ali Al-Huazy

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a theoretical and experimental study of Fiber Reinforce Polymer (FRP) beam-columns with uniaxial bending and including retrofitting. The research involved the design and fabrication of a testing apparatus which was then used for a series of beam-column tests. Three different types of beam-column cross sections were used, namely, channel section, I-section, and square tube section. Six non-retrofitted beam-columns were tested in addition to two retrofitted ones. The members were subjected to an eccentric vertical load applied through a lever arm generating gradually increasing axial load and uniaxial bending moment up to the maximum load. …

Behavior And Strength Of Pultruded Frp I-Section Columns Including Uniaxial And Biaxial Bending, Emad M. Amin

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a study of the behavior and strength of pultruded glass fiber reinforced polymer (FRP) I-section columns including uniaxial and biaxial applied bending moments. Also included in the study is a critical assessment of ASCE-LRFD Pre-standard for pultruded FRP structures in view of the rigorous analysis presented herein. The theoretical solution is based on a system of three coupled differential equations of equilibrium combined with pinned flexural and torsional boundary conditions. Effects of induced warping due to second-order terms as well as initial out-of-straightness are accounted-for in the governing differential equations. Detailed investigations into the …

New Engineering Approaches To Arrhythmias And Myocardial Infarction, Frency Varghese

Biomedical Engineering Theses & Dissertations

In this thesis, we present new engineering approaches to several important cardiac diseases. Chapter 1 considers the dynamics of arrhythmias. The most dangerous arrhythmias are reentrant arrhythmias, including ventricular fibrillation and ventricular tachycardia. During these arrhythmias, there are one or several rotating excitation waves present in the heart. Because of their shape, these waves are called scroll waves; their center of rotation is a one-dimensional curve called the filament. Filaments largely constrain the configuration of a scroll wave but are much simpler, so much effort has gone into describing scroll wave dynamics in terms of the dynamics of their filaments. …

Treatment Of Greywater Using Bio Filtration And Permeable Pavement Systems, Assem Mahn El-Ashkar

Theses

Municipal wastewater can be divided into two categories, greywater and black water. Greywater occupies about 75% of total wastewater and are relatively less polluted than the black water. Reuse of greywater is becoming popular in many arid and semiarid regions in order to reduce the municipal water demand. They can be reused for groundwater recharge, landscape irrigation and for toilet flushing. However, the main challenges are their collection, storage and selection of the appropriate treatment system. The United Arab Emirates (UAE) is located in a hyper arid region, having an annual average rainfall of less than 100 mm. Reliable survey …

Seismic Fragility Analysis For Highway Bridges With Consideration Of Soil-Structure Interaction And Deterioration, Xin Zong

Dissertations, Theses, and Capstone Projects

Bridges are critical elements within the highway transportation network. It is very important for the owner or designer to perform the risk assessment of the highway bridges during extreme events, such as earthquakes, due to their importance to the network, commerce, economic vitality and mobility. Recent studies show that seismic fragility curves are useful tools for the seismic risk assessment of highway bridges.

Although general seismic fragility approach has been well established in the last two decades and numerous retrofit methods have been applied to highway bridges in New York City (NYC) metropolitan area, which has been classified as moderate …

3d Scene Reconstruction With Micro-Aerial Vehicles And Mobile Devices, Ivan Dryanovski

Dissertations, Theses, and Capstone Projects

Scene reconstruction is the process of building an accurate geometric model of one's environment from sensor data. We explore the problem of real-time, large-scale 3D scene reconstruction in indoor environments using small laser range-finders and low-cost RGB-D (color plus depth) cameras. We focus on computationally-constrained platforms such as micro-aerial vehicles (MAVs) and mobile devices. These platforms present a set of fundamental challenges - estimating the state and trajectory of the device as it moves within its environment and utilizing lightweight, dynamic data structures to hold the representation of the reconstructed scene. The system needs to be computationally and memory-efficient, so …

Modeling, Construction, And Validation Of A Simulator For A Nuclear Process Control Test Facility, Binggang Cui

Electronic Thesis and Dissertation Repository

This thesis presents the modeling, construction, and validation of a software simulator for a facility with physical components, referred to as NPCTF (Nuclear Process Control Test Facility). The simulator focuses simulation functionalities on dynamic behaviours of thermal-hydraulic systems related to nuclear power plants.

The modeling techniques adopted to construct the simulator are based on physical principles. Dynamic models are developed to reproduce the dynamic characteristics of NPCTF. Based on these mathematical relationships, computer codes are developed with the toolbox Simscape. The simulator can be used to investigate specific scenarios of NPCTF under similar operating conditions.

A simulation environment, the toolbox …

An Exploration Of Bicyclist Comfort Levels Utilizing Crowdsourced Data, Bryan Philip Blanc

Dissertations and Theses

Bicycle transportation has become a central priority of urban areas invested in improving sustainability, livability, and public health outcomes. Transportation agencies are striving to increase the comfort of their bicycle networks to improve the experience of existing cyclists and to attract new cyclists. The Oregon Department of Transportation sponsored the development of ORcycle, a smartphone application designed to collect cyclist travel, comfort, and safety information throughout Oregon. The sample resulting from the initial deployment of the application between November 2014 and March 2015 is described and analyzed within this thesis. 616 bicycle trips from 148 unique users were geo-matched to …

Flows In Vibrating Channels, Sahab Zandi

Electronic Thesis and Dissertation Repository

A spectral algorithm based on the immersed boundary conditions (IBC) concept has been developed for the analysis of flows in channels bounded by vibrating walls. The vibrations take the form of travelling waves of arbitrary profile. The algorithm uses a fixed computational domain with the flow domain immersed in its interior. Boundary conditions enter the algorithm in the form of constraints. The spatial discretization uses a Fourier expansion in the stream-wise direction and a Chebyshev expansion in the wall-normal direction. Use of the Galileo transformation converts the unsteady problem into a steady one. An efficient solver which takes advantage of …

Nanostructured Carbon Materials For Active And Durable Electrocatalysts And Supports In Fuel Cells, Adam Riese

Electronic Thesis and Dissertation Repository

Meeting the energy demands of the future will require a breadth of technologies and materials for generating and converting electricity. Increasing activity and reducing costs of electrocatalysts for fuel cells is among the most important challenges for the technology. With advances in nanomaterials there has been increased interest in creating novel catalysts with both high activity and excellent long-term durability. This thesis aims to understand how modification of nanostructured carbons can be used to improve the activity and durability of catalysts and supports for the oxygen reduction reaction (ORR). Using an integrating approach to synthesis, characterization, and electrochemical testing, it …

Diseño De Un Sistema De Transporte Automatizado De Rosas, Javier Leandro Barón Merchán, William David Perez Herrera

Ingeniería en Automatización

Este trabajo describe el diseño de un sistema automatizado, capaz de realizar la manipulación y transporte de rosas durante el proceso de pos cosecha, con una productividad máxima de 3600 flores por hora. Para llevar a cabo este proyecto, el primer paso fue realizar el diseño mecánico partiendo de un análisis de las diferentes alternativas de cada uno de los componentes del sistema de transporte y así poder seleccionar el que mejor funcione teniendo en cuenta su eficiencia, material y costo. Posteriormente, se determinó la potencia requerida del motor para movimiento de la cadena transportadora y la fuerza de arranque; …

Application Of 3d Printing Technology In Porous Anode Fabrication For Enhanced Power Output Of Microbial Fuel Cells, Bin Bian

Electronic Thesis and Dissertation Repository

Microbial fuel cells (MFCs) are widely researched for application in wastewater treatment. However, the current anodes used in MFCs often suffer from high fabrication cost and uncontrollable pore sizes. In this thesis, three-dimensional printing technique was utilized to fabricate anodes with different micro pore sizes for MFCs. Copper coating and carbonization were applied to the printed polymer anodes to increase the conductivity and specific surface area. Voltages of MFCs with various anodes were measured as well as other electrochemical tests such as linear sweep voltammetry and electrochemical impedance spectroscopy. 3D copper porous anode produced higher maximum voltages and power densities …

Shear And Peel Stresses At The Interface Between Hollowcore Slabs And The Topping Concrete, Aiham Adawi

Electronic Thesis and Dissertation Repository

Hollowcore slabs are used in floors and roofs of residential, commercial, industrial and institutional buildings. They are precast/prestressed concrete elements produced using the extrusion process. Their surface finish can be “machine-cast” or “intentionally roughened”. A typical floor consists of a number of hollowcore slabs that are connected together. Prestressing causes hollowcore slabs to camber, which results in an uneven floor surface. A 50 mm topping concrete is commonly cast to level the floor surface. To avoid delamination, engineers require bonding agents to be applied on the hollowcore slab surface before pouring the topping concrete. The concrete topping can be used …