Engineering Commons^™

Investigation Into Mechanisms And Mitigation Of Alkali-Silica Reaction In Sustainable Portland Cement Concrete Containing Recycled Glass Materials, Kaveh Afshinnia

All Dissertations

A significant portion of recycled glass from municipal waste streams is not found to be suitable for reuse as cullet in the production of new glass containers, and as a result it is disposed in landfills. One of the appropriate ways to reduce the disposal of waste glass in landfills is by using it in portland cement concrete as an aggregate material and/or supplementary cementitious material to replace portion of portland cement. The high silica content of the soda glass (approximately 70%) can potentially behave as a pozzolanic material when finely ground, which may enhance the mechanical and durability properties …

Evaluating Corrosion Resistance Of Reinforcing Steel In A Novel Green Concrete, Andrea Carolina Ramirez

USF Tampa Graduate Theses and Dissertations

Reinforced concrete structures are expected to have a long service life with minimal maintenance. Corrosion of reinforcing steel is a major factor in reducing concrete structure lifespan, as corrosion products occupy a larger volume than that of the consumed steel and generate tensile stresses that crack the concrete cover. Procedures to control corrosion in traditional concrete, which is made with Portland-cement (PC), have been well established. However, in recent years novel concrete materials based on alternatives to normally cured PC have been developed in response to global needs to reduce greenhouse gases emissions. In particular, a promising new cement has …

High-Solids Anaerobic Digestion Of The Organic Fraction Of Municipal Solid Waste State Of The Art, Outlook In Florida, And Enhancing Methane Yields From Lignocellulosic Wastes, Gregory Richard Hinds

USF Tampa Graduate Theses and Dissertations

Anaerobic digestion (AD) is a biotechnology that employs natural microbial metabolism under oxygen-free conditions to stabilize organic waste. AD has been shown to be the most environmentally sustainable technology for treating the organic fraction of municipal solid waste (OFMSW), as it allows for the recovery of energy and nutrients from the waste. AD of OFMSW also saves landfill space and reduces leachate generation and fugitive methane emissions from landfills. High-solids AD (HS-AD) technologies (those designed to process feedstocks with >15% total solids content) have been shown to yield additional benefits when compared with liquid AD (L-AD) for treating OFMSW, including …

Anaerobic Membrane Bioreactors To Treat Municipal Wastewater At Ambient Temperatures, Matthew D. Seib

Dissertations (1934 -)

Anaerobic biotechnology is viewed as a sustainable alternative to aerobic biotechnology for municipal wastewater recovery. However, anaerobic processes have not been successful in cold climates. Past examples have not been able to meet low organic effluent concentrations, or have failed due to biomass washout resulting from low temperature operation and short hydraulic residence time. Recently, the anaerobic membrane bioreactor (AnMBR) has been shown to achieve low effluent organic concentrations and maintain stable anaerobic biomass. However, shortcomings have included high energy demands for membrane operation and poor understanding of microbial community structures within AnMBRs. This dissertation describes efforts to improve AnMBRs …

The Effect Of Urbanization On The Embodied Energy Of Drinking Water In Tampa, Florida, Mark Vincent Eli Santana

USF Tampa Graduate Theses and Dissertations

Increasing urbanization has serious implications for resource and energy use. One of these resources is drinking water. The increased amount of impervious surfaces associated with urban development is responsible for increased runoff during rain events, which may have a negative impact on the quality of nearby bodies of water, including drinking water sources. The growing populations associated with urbanization require a higher water demand. In addition, urban drinking water systems use energy to collect, treat, and distribute a safe reliable effluent to users. Therefore, this study focuses on the degree to which urbanization influences the embodied energy of drinking water …

A Cradle To Farm Gate Life Cycle Analysis Of Land Use In U.S. Pork Production, William Benjamin Putman

Graduate Theses and Dissertations

The goal of this study was to conduct a detailed Life Cycle Assessment (LCA) of the U.S. live swine production supply chain to quantify land use requirements and to assess the impact associated with various ration compositions. The functional unit was defined as one kilogram (2.2 pounds) of live swine at the farm gate, ready for transport to the abattoir. This assessment focused on the three highest producing USDA regions, which encompassed the Midwest (Regions 5 and 7) and the Southeast (Region 4), representing 86% of U.S. market hog production.

First, a literature review was conducted to summarize the most …

Database Design For The Collection And Visualization Of Sustainabilty Data, Henry A. Kozlowski, Nikhila Perugupalli

Industrial and Manufacturing Engineering

The goal of the project was to create a database that would be a repository for the high volume of sustainability data Illumina would like to collect. To couple with the database the project team’s goal was to design a system for visualizing the data graphically. Illumina required a database system that would be user-friendly, easy to add, delete, and edit data inputs, as well as a program that would allow the user to easily sort and graph data. The intent of the graphical representation of the data is to publish the graphs in a monthly report that would be …

Current Protection For The Energy Harvesting From Exercise Machines (Ehfem) Project, Colton Crivelli

Electrical Engineering

The Energy Harvesting from Exercise Machines (EHFEM) project intends to create an exercise machine that recycles the energy expended by an athlete operating the machine by sending it to the electric grid. The work done by the user goes through a DC-DC converter and an inverter in order to prepare it for delivery to the grid. A protection circuit ensures that the inverter does not try to pull too much current from the DC-DC converter. The project implements a current protection system that ensures the system doesn’t experience an overcurrent condition.

Using The Triple Bottom Line To Select Sustainable Suppliers For A Major Oil And Gas Company, Pandarinath Adarsh Sunkari

Graduate Theses and Dissertations

Companies have primarily been focusing on the financial bottom line i.e., on increasing profits by increasing revenues and reducing costs. With high energy usage and environmental change posing threats to the environment and business operations, companies are now considering sustainability. Since some global suppliers have low cost labor, Social well-being and human development has also emerged as major goals of a company performing global operations. Focusing on these three goals is termed the "Triple Bottom Line" (TBL). We study and explore the TBL benefits that could be realized by an oil and gas company by focusing on sustainable suppliers. A …

Incorporating Environmental And Social Factors Into Decision-Making Of An Oil And Gas Industry To Improve Sustainability, Gaurav Dabhadkar

Graduate Theses and Dissertations

The energy industry (including the oil and gas industry) is facing unparalleled scrutiny and demands from stakeholders including investors, regulators (industry and environmental), communities, and other stakeholders. Sustainable development is one of the major concerns of the oil and gas industry. Companies are seeking to increase sustainability of their operations by considering environmental and Social concerns in addition to economic concerns. Oil and gas companies need to take decisions at different stages of the product life cycle (e.g. planning, design, exploration, production, and clean-up) which have direct or indirect impact on the organization's objectives. Addressing economic, technical, Social, and environmental …

The Use Of Jatropha Curcas To Achieve A Self Sufficient Water Distribution System: A Case Study In Rural Senegal, Alexandra Archer

Dissertations, Master's Theses and Master's Reports - Open

The use of Jatropha curcas as a source of oil for fueling water pumps holds promise for rural communities struggling to achieve water security in arid climates. The potential for use in developing communities as an affordable, sustainable fuel source has been highly recommended for many reasons: it is easily propagated, drought resistant, grows rapidly, and has high-oil-content seeds, as well as medicinal and economic potential. This study uses a rural community in Senegal, West Africa, and calculates at what level of Jatropha curcas production the village is able to be self-sufficient in fueling their water system to meet drinking, …

Mathematical Modeling For Platform-Based Product Configuration Considering Total Life-Cycle Sustainability, Tian Lan

Theses and Dissertations--Mechanical Engineering

Many companies are using platform-based product designs to fulfill the requirements of customers while maintaining low cost. However, research that integrates sustainability into platform-based product design is still limited. Considering sustainability during platform-based design process is a challenge because the total life-cycle from pre-manufacturing, manufacturing and use to post-use stages as well as economic, environmental and societal performance in these stages must be considered. In this research, an approach for quantifying sustainability is introduced and a mathematical model is developed for identifying a more sustainable platform. Data from life-cycle assessment is used to quantify environmental factors; criteria from the Product …

Model Based Process Analysis And Tool Development For Sustainable Electroplating Operations, Navdeep Bhadbhade

Wayne State University Theses

The electroplating industry has faced tremendous challenges in maintaining its economic competitiveness as well as improving its environmental performance in the global economy. In electroplating systems, waste generation from manufacturing lines has been always a serious concern, as waste emitted in different forms contains various hazardous and toxic chemicals. It is recognized that much of the generated waste is avoidable, and reduction of such avoidable waste could significantly reduce the consumption of chemicals, energy, and water. Proactive source reduction can improve not only environmental quality, but also economic performance. This type of source reduction, which could be called Proactive Pollution …

Análisis De Impacto Expost De La Implementación De Medidores Prepago Para La Empresa De Energía De Boyacá Ebsa S.A E.S.P, Zaret Natalia Mayorga Roncancio, Andrea Yesenia Molano Gómez

Ingeniería Eléctrica

Este trabajo presenta el análisis de impacto de la implementación de medidores prepago de servicio eléctrico en zonas rurales, a partir de los antecedentes técnicos y regulatorios en el país, se determinaron los tipos de medidores empleados en la actualidad en las zonas rurales colombianas, identificando características operacionales de este sistema, políticas regulatorias que se necesitaron para implementar este sistema, condiciones socioculturales, ambientales y económicas, para así identificar y analizar los impactos en los distintos aspectos sostenibles asociados con estas experiencias. Por último, este estudio identifica las ventajas y desventajas reales de la aplicación de estos sistemas para las empresas …

A Framework For Sustainable Material Selection For Multi-Generational Components, Ryan T. Bradley

Theses and Dissertations--Mechanical Engineering

The early stages of a product’s design are a critical time for decisions that impact the entire life-cycle cost. Product designers have mastered the first generation; however, they currently do not have the ability to know the impact of their decisions on the multi-generational view. This thesis aims at closing the gap between total life-cycle information and the traditional design process in order to harbor sustainable value creation among all stakeholders involved. A framework is presented that uses a combination of a life-cycle costing methodology and an evolutionary algorithm in order to achieve a sustainability assessment for a true multi-generational …

A Framework For Determining Building Water Cycle Resilience Using A Dynamic Water Resilience Assessment Model (Wram), Caryssa Joustra

USF Tampa Graduate Theses and Dissertations

The aim of this project was to quantitatively measure the resilience of the building water cycle. In order to accomplish this goal, a framework was developed that outlines how building water resilience can be evaluated. The framework presented assumed that resilience describes the fulfillment of system functions; in this case, the system functions considered are those actualized by the building water system. A building water resilience assessment model (WRAM) was developed with the ability to simulate different building water cycles and resilience scenarios. Resilience is dependent on the type and magnitude of a disturbance. Therefore, unique disruption scenarios were developed …

Economic Viability And Societal Benefits Of Integrated Multimodal Freight Corridors And Sustainable Passenger Transportation, Seth Austin Cobb

Electronic Theses and Dissertations

No abstract provided.

Ecological Sanitation In Uganda: Promotion Through Demonstration Facilities And Potential For Ascaris Reduction By Free Ammonia Inactivation Using Stored Urine, John Thomas Trimmer

USF Tampa Graduate Theses and Dissertations

As Uganda works to transform itself into an industrialized, middle-income country in the coming decades, the country is faced with a number of problematic trends that could hinder this transition. High population growth and urbanization are quickly forcing small towns to deal with issues of limited space and the aesthetic conditions within sanitation systems, while declining soil fertility in surrounding rural areas calls into question the future nutritional security of the growing population. Ecological Sanitation (Eco-San) systems, which are designed to recover nutrients from human excreta, may help to address these trends.

Improved sanitation coverage in Uganda is currently estimated …

Advanced Sustainable Concrete Materials For Infrastructure Applications, Kaylea Ann Smith

Masters Theses

"This study was performed to examine the effects of cement replaced by high volumes of Class C fly-ash on durability characteristics of concrete up to 120 days. Specifically, this study investigates possibility of amending American Society for Testing and Materials (ASTM) to allow High Volume Fly-ash (HVFA) concrete to cure until later ages prior to testing instead of 28 days. Five mix designs were compared with varying fly-ash percentages from 0 to 70% (by total cementitious mass). No other additives were present in any of the five mix designs. Water-to-cementitious ratio (w/cm) and total cementitious material remained constant as 0.40 …

Integrated Sustainability And Resiliency Assessment Methodology For The Design Of Single-Family Residential Structures Subject To Wind And Flood Hazards, Elizabeth Chisolm Matthews

LSU Doctoral Dissertations

Sustainability and resiliency have become important in shaping the criteria in performance-based design objectives in the recent past and will continue to shape future design as climate change impacts and disasters become more prevalent. While much work has been carried out in developing tools to aid in sustainable and resilient performance-based design there is still much work to be done. It is evident that while sustainability and resiliency have mutual advantages there are also inherent conflicts between the two design approaches. Some of the conflict relates to the robustness required of resilient design, which may have higher environmental impacts than …