Engineering Commons^™

Machine Components Test, Brandon Younger, Lauren Romero, Carlos Padilla

Mechanical Engineering

To enhance California Polytechnic State University’s Mechanical Engineering program, Dr. Schuster has sponsored Brandon Younger, Lauren Romero, and Carlos Padilla to design and develop a new lab for students in the Intermediate Design class to test real mechanical components. This report discusses the background and ideation process that lead to the development of the Educational Mechanical Breadboard for Transmission System Components (Machine Components Test). Additionally, detailed drawings, 3D modeling, testing plans, and analysis are included to show how the Machine Components Test design will work and be validated.

Gaf Glass Mat Splice Table Improvements, Grant Haug, Kevin Lansang, Ronald Lam, Michael Mooney

Mechanical Engineering

The GAF asphalt shingle production line in Shafter, CA requires continuous operation in order to maximize production efficiency. The assembly line process begins with feeding a large roll of fiberglass web into an accumulator. However, once the fiberglass roll approaches the end, it must be spliced with a new roll in order to maintain continuous feed into the production line. The splicing process must be fast and reliable to prevent any delay of the production line. Currently, this process is performed by two workers who manually feed the new fiberglass roll, align the two mats, cut the mats, apply glue …

Development Of A Design Tool For Biologically Inspired Fault Adaptive Design By Strategy Mapping, Nicholas Steven Huisman

Graduate Theses and Dissertations

A design tool for Biologically Inspired Fault Adaption that utilizes the concept of strategy mapping was developed and the development process and testing is presented in this paper. The concept of strategy mapping is derived primarily from the field of military theory and supposes that for any given specific problem, that there exists a specific solution for, a single strategy can be identified for that solution/problem combination. This strategy, when applied to the specific problem yields the specific solution. This specific solution is referred to as the “tactics” of the strategy. The strategy can also be directly applied to a …

Underwater Rope Fatigue Testing Machine, Napoleon Nino, Andrew Pimentel

Mechanical Engineering

The design and fabrication of an underwater rope fatigue testing machine meant to simulate the effects of an oceanic environment and the effects on rope.

Design Of A Meta-Material With Targeted Nonlinear Deformation Response, Zachary Satterfield

All Theses

The M1 Abrams tank contains track pads consist of a high density rubber. This rubber fails prematurely due to heat buildup caused by the hysteretic nature of elastomers. It is therefore desired to replace this elastomer by a meta-material that has equivalent nonlinear deformation characteristics without this primary failure mode. A meta-material is an artificial material in the form of a periodic structure that exhibits behavior that differs from its constitutive material. After a thorough literature review, topology optimization was found as the only method used to design meta-materials. Further investigation determined topology optimization as an infeasible method to design …

Design For Reduction Of Noise Produced By Natural Gas Regulator, Britany L. Chamberlain

Undergraduate Honors Capstone Projects

This document describes the design of a multi-stage restrictive orifice device (MSRO) that serves to reduce the noise produced by a regulator valve. The scope of this document explains the determination of the proper design through the development of analytical models, the design of a test fixture to obtain empirical data, and the corroboration of the models with empirical data to obtain a working solution.

Towards A Semantic Knowledge Management Framework For Laminated Composites, Vivek Premkumar

Masters Theses

The engineering of laminated composite structures is a complex task for design engineers and manufacturers, requiring significant management of manufacturing process and materials information. Ontologies are becoming increasingly commonplace for semantically representing knowledge in a formal manner that facilitates sharing of rich information between people and applications. Moreover, ontologies can support first-order logic and reasoning by rule engines that enhance automation. To support the engineering of laminated composite structures, this work developed a novel Semantic LAminated Composites Knowledge management System (SLACKS) that is based on a suite of ontologies for laminated composites materials and design for manufacturing (DFM) and their …

Feasibility Analysis Of Steam Ventilation In Supercavitation Design, Austin Culberson

All Theses

The complete envelopment of a submerged object by a continuous cavity, or supercavity, results in significant reduction of the skin drag acting on the object, allowing for substantial increases in the maximum speeds of underwater devices. The formation of supercavities often requires supplemental ventilation, traditionally by non-condensable gasses, as natural supercavitation occurs at relative speeds between the object and liquid medium that are infeasible for the device to reach without supercavitation itself. The aim of this research is to investigate the feasibility of vaporous ventilation in supercavitation design with the hope of reducing non-condensable ventilation requirements which are inherently limited …

Increasing The Independence Of Children With Spina Bifida Through The Designing And Building Of A Mechanical Aide, Andrew Duffek, Robert Brent, Michael Hamada, Melissa Rodriguez

Industrial and Manufacturing Engineering

In order to assist Silas Hopper, a child with spina bifida, with getting into his wheelchair independently when being on the ground, the senior project team set out to construct a device that would fulfill that purpose. They did this through coming up with a strict definition of the problem to be solved, designing a number of potential solutions for the problem, prototyping to determine the feasibility of the solutions, making design modifications after testing the prototype, and building the final device.

The end product was a device that was able to operate mechanically, with a design that considered safety …

Database Design For The Collection And Visualization Of Sustainabilty Data, Henry A. Kozlowski, Nikhila Perugupalli

Industrial and Manufacturing Engineering

The goal of the project was to create a database that would be a repository for the high volume of sustainability data Illumina would like to collect. To couple with the database the project team’s goal was to design a system for visualizing the data graphically. Illumina required a database system that would be user-friendly, easy to add, delete, and edit data inputs, as well as a program that would allow the user to easily sort and graph data. The intent of the graphical representation of the data is to publish the graphs in a monthly report that would be …

Small Scale Erp Engine Design, Colyn Muir Dickson, Matthew Wade Haymond

Industrial and Manufacturing Engineering

This project set out to create a 1) low-cost, 2) dynamic, and 3) user-friendly small scale ERP software tool. These three key attributes position this product against complex and expensive systems such as SAP or Oracle. While the product still retains the dynamic and financial capabilities any good ERP system should have, the biggest value proposition is its simple and user-friendly interface. The software has a dual product-market fit: for small businesses as a low-cost planning tool, and for universities as a teaching tool. In the design phase, the team kept a primary focus on ergonomic software development while maintaining …

Visualizing Population Density Based On Wifi Router Location And Network Usage, Tyler Deitz

Liberal Arts and Engineering Studies

This research paper introduces a prototype of a feature for Robert E. Kennedy’s maps web application. The feature visualizes population density based off wifi router location and network usage within the building. The significance of the feature is noted by documenting the library’s transition into a hub for student life and campus culture, which increases the space’s occupancy and visitor retention for a longer time. The feature is based off a Voronoi diagram map distribution which strongly affects its technical and visual implementation. The end product is user tested by Cal Poly students and received a 93.5% satisfaction rate.

The Design Of An Optimized Patient-Specific In Vivo Spinal Fusion Cage Using Additive Manufacturing, Gorman Donnelly

Honors Theses

This project involved the design of an all-in-one patient-specific lumbar spinal fusion cage using Direct Metal Laser Sintering (DMLS) manufacturing. The cage is zero-profile and does not need the use of supplemental fixation. It was manufactured out of the titanium alloy Ti 6Al-4V using a DMLS rapid prototyping machine from a third party company. The endplates of the cage are patient-specific allowing for a larger surface contact area between the cage and the vertebral bodies than most cages on the market. This fosters a more successful fusion as well as decreases surgery time, effectively decreasing recovery time. Different porosity variations …

Propulsion And P.I Control Systems For Sae Aircraft, Ervin Meneses

Honors Theses

This thesis analyzes the integration and performance of a P.I control system within the SAE Aero Design Competition aircraft. This year the Union College Aero Design team will be competing in the Society of Automotive Engineers (SAE) Aero Design “Regular Class” Competition, which encompasses the design and production of a large‐scale remote controlled aircraft that must meet predetermined power and size constraints. The overall objective of the competition is to have the designed aircraft carry a maximum amount weight within a 200 feet runway while staying below a 1000W power limit. Each competitor must integrate a power limiter into their …

Hand Operated Tabletop Letterpress Assembly Instructions 1.0, George Chiu, Brendan Domos, Spencer Herzog, Nathan Sandidge, Kevin Weinstein

Theses

A group of RIT Mechanical Engineering students spent the 2014-2015 academic year in their senior design class collaborating with the RIT Cary Graphic Arts Collection to design and fabricate a 21st century hand-operated platen press.

The press that was designed during this engineering exercise met several requirements:

• be under 30 lbs
• fit in a 24 inch square table top space
• be manufactured with a majority of components which could be purchased from a standard parts supplier
• be able to print with commonly manufactured ink rollers, ink, letterpress chases, spacing and furniture
• the platen and packing had to be adjustable to …

The Dc House Project: Electrical System Design & Construction, John Bradley

Electrical Engineering

This project entails the design and assembly of the photovoltaic system, switchboard panel enclosure, and battery enclosure for the DC House’s main electrical system. The intended purpose of this project is to provide the electrical framework necessary for future students to easily modify and add to this rendition of the DC House. The principle design implements a variety of renewable energy sources, however this senior project only uses solar power in order to maintain a manageable scope. Each of these renewable energy sources are stepped down to a voltage of 24V and input to a Multi Input Single Output DC …

Design Of A Double-Dose Epinephrine Auto-Injector Using 3d-Printing, Timothy Calvin Sheehan

Honors Theses

This project involved the design and prototyping of an epinephrine auto-injector capable of administering two separate doses. Epinephrine auto-injectors are used in the treatment of patients undergoing anaphylaxis, an allergic reaction causing the restriction of airways and a drop in blood pressure. The timely administration of epinephrine counteracts these symptoms and can be lifesaving. Currently the only devices available to consumers administer one unit dose of epinephrine and are then no longer usable. In 30% of cases where patients undergo these symptoms a second dose of epinephrine is required. My design was based partially off the concept behind currently available …

Remote Water Metering In Venecia, Nicaragua, Jeffrey Wettstein

Honors Theses

The senior Capstone Design Project is the culmination of over three years of undergraduate work in electrical engineering, and other related fields. The project allows students to demonstrate their knowledge on a tangible design. Starting from a blank slate, the Capstone process asks students to carefully move through every stage of design in order to create the most effect output. Water shortage is a major problem for the entire world including the United States, but particularly in developing countries like Nicaragua. The community of Venecia, Nicaragua has a unique water problem. Community members leave taps running in fear that if …

Industrial Paper Tray, Kristin L. Woodward, Brady Bauer, Kevin Brown, Austin Mclaurine

Chancellor’s Honors Program Projects

No abstract provided.

Design Of Reliable And Secure Network-On-Chip Architectures, Dean Michael B Ancajas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The trend towards massive parallel computing has necessitated the need for an On-Chip communication framework that can scale well with the increasing number of cores. At the same time, technology scaling has made transistors susceptible to a multitude of reliability issues. This dissertation demonstrates design techniques that address both reliability and security issues facing modern NoC architectures. The reliability and security problem is tackled at different abstraction levels using a series of schemes that combine information from the architecture-level as well as hardware-level in order to combat aging effects and meet secure design stipulations while maintaining modest power-performance overheads.

A Collaborative Conceptual Aircraft Design Environment For The Design Of Small-Scale Uavs In A Multi-University Setting, Joseph Samuel Becar

Theses and Dissertations

In today's competitive global market, there is an ever-increasing demand for highly skilled engineers equipped to perform in teams dispersed over several time-zones by geography. Aerospace Partners for the Advancement of Collaborative Engineering (AerosPACE) is a senior design capstone program co-developed by academia and industry to help students develop the necessary skills to excel in the aerospace industry by challenging them to design, build, and fly an unique unmanned aerial vehicle (UAV). Students with little to no experience designing UAVs are put together in teams with their peers from geographically dispersed universities. This presents a significant challenge for the students …

Force Sensing In Arthroscopic Instruments Using Fiber Bragg Gratings, Daniel S. Yurkewich

Electronic Thesis and Dissertation Repository

Minimally-invasive surgery has revolutionized many medical procedures; however, it also impedes the ability to feel the interaction between the surgical tool and the anatomical part being operated on. In order to address this problem, it is necessary to obtain accurate measurements of the interaction forces exerted on the surgical tools during surgery. These forces can then be manifested to the surgeon via a haptic device or presented visually (visual-force feedback). This thesis describes the use of a fiber optic device to measure and display to the surgeon interaction forces acting on an arthroscopic tool. The sensorization of the tool involves …

Design Methods For Remotely Powered Unmanned Aerial Vehicles, William Beaman Howe

Master's Theses

A method for sizing remotely powered unmanned aerial vehicles is presented to augment the conventional design process. This method allows for unconventionally powered aircraft to become options in trade studies during the initial design phase. A design matrix is created that shows where, and if, a remotely powered vehicle fits within the design space. For given range and power requirements, the design matrix uses historical data to determine whether an internal combustion or electrical system would be most appropriate. Trends in the historical data show that the break in the design space between the two systems is around 30 miles …

2015 Zips Sae Baja Brakes And Throttle System, Philip A. Bennett

Williams Honors College, Honors Research Projects

The SAE Baja student design team at The University of Akron is one of the longest-standing design teams at the university. The purpose of this team is to design, manufacture, test, and race an off-road vehicle within the guidelines of competition established by the Society of Automotive Engineers. The vehicle is made up of a small number of subsystems including frame, drivetrain, suspension, steering, and braking. The following will discuss all aspects of the design process of the braking and throttle system of the 2015 Zips Baja car. This process includes several steps and considerations such as design goals, system …

Senior Design: Kong Toy Instruction-Manual Insertion, Rachael L. Innocenzi, Ashley N. Cuthbert, Marianna R. Smith

Williams Honors College, Honors Research Projects

The team’s goal is to design and test a prototype and procedure that will automate the insertion of the Kong toy instructions into the cardboard packaging. This automation will increase the speed at which the product is packaged and will serve as an aid to workers with limited dexterity who find the task cumbersome.

Design Optimization And Optical Characterization Of A High Temperature Solar Receiver, Samia Afrin

Open Access Theses & Dissertations

Concentrated solar power (CSP) is a fast forwarding technology in power generation sector because of its' competitive price, abundance in nature and the most important fact is its' energy storage capability. Among the four types of available CSP technology, central receiver has more potential concerning with high temperature, power block efficiency and levelized cost of energy (LCOE). Other than conventional type of receiver design, the concept of this work is very particular in a sense of its design novelty.

National Renewable Energy Laboratory (NREL) come up with a new concept of high temperature solar receiver called near black body (NBB) …

Model-Based Verification For Simulink Design, Victor Oke

All Graduate Theses, Dissertations, and Other Capstone Projects

Testing a Model-Based design is the only way to determine the correctness of the designed model but not enough to conclude that the design is error free. Verification exposes all the design errors and describes the functionality of the system. Assertion based verification helps to determine whether the model obey the actual design requirements. This thesis work is mainly based on verification of a Water Tank control system modeling using SIMULINK model.

Senior Design: Kong Toy Instruction-Manual Insertion, Marianna R. Smith, Rachael L. Innocenzi, Ashley N. Cuthbert

Williams Honors College, Honors Research Projects

The team’s goal is to design and test a prototype and procedure that will automate the insertion of the

Kong toy instructions into the cardboard packaging. This automation will increase the speed at which

the product is packaged and will serve as an aid to workers with limited dexterity who find the task

cumbersome.

Senior Design:Kong Toy Instruction-Manual Insertion, Ashley N. Cuthbert, Rachael L. Innocenzi, Marianna R. Smith

Williams Honors College, Honors Research Projects

The team’s goal is to design and test a prototype and procedure that will automate the insertion of the Kong toy instructions into the cardboard packaging. This automation will increase the speed at which the product is packaged and will serve as an aid to workers with limited dexterity who find the task cumbersome.

Designing A Heat Sink For Lithium-Ion Battery Packs In Electric Vehicles, Dylan Irvine, Evan Foreman, Christopher B. Remington, Aaron Jackson, Sam Endrizzi

Williams Honors College, Honors Research Projects

This report addresses the concepts and implementation of fluid cooled heat sink designs for an electric or hybrid vehicle battery. To determine the battery’s temperature and heat flux profile, testing was performed by measuring these values at multiple locations on a lithium-ion pouch battery using heat flux sensors and thermocouples during the charge and discharge cycles of the battery. Once the data was collected and analyzed, trendlines were fit to the heat flux data then used to create equations for the heat flux profile during the discharging stage. Each equation represented a specific region on the battery geometry. Four heat …