Engineering Commons^™

Investigation Of Electromagnetic Signatures Of A Fpga Using An Aprel Em-Isight System, Karynn A. Sutherlin

Theses and Dissertations

Large military platforms have encountered major performance and reliability issues due to an increased number of incidents with counterfeit electronic parts. This has drawn the attention of Department of Defense (DOD) leadership making detection and avoidance of counterfeit electronic parts a top issue for national defense. More defined regulations and processes for identifying, reporting, and disposing of counterfeit electronic parts are being revised to raise awareness for this aggregating issue, as well as enhance the detection of these parts. Multiple technologies are currently employed throughout the supply chain to detect counterfeit electronic parts. These methods are often costly, time-consuming, and …

Electromechanics Of An Ocean Current Turbine, Vasileios Tzelepis

University of New Orleans Theses and Dissertations

The development of a numeric simulation for predicting the performance of an Ocean Current Energy Conversion System is presented in this thesis along with a control system development using a PID controller for the achievement of specified rotational velocity set-points. In the beginning, this numeric model is implemented in MATLAB/Simulink® and it is used to predict the performance of a three phase squirrel single-cage type induction motor/generator in two different cases. The first case is a small 3 meter rotor diameter, 20 kW ocean current turbine with fixed pitch blades, and the second case a 20 …

Spectral And Temporal Interrogation Of Cerebral Hemodynamics Via High Speed Laser Speckle Contrast Imaging, Rex Chin-Hao Chen

Theses and Dissertations

Laser Speckle Contrast Imaging (LSCI) is a non-scanning wide field-of-view optical imaging technique specifically developed for cerebral blood flow (CBF) monitoring. In this project, a versatile Laser speckle contrast imaging system has been designed and developed to monitor CBF changes and examine the physical properties of cerebral vasculature during functional brain activation experiments.

The hardware of the system consists of a high speed CMOS camera, a coherent light source, a trinocular microscope, and a PC that does camera controlling and data storage. The simplicity of the system’s hardware makes it suitable for biological experiments.

In controlled flow experiments using a …

Analysis And Control Of Vsc Based Hvdc System Under Single-Line-To-Ground Fault Conditions, Xiaojie Shi

Doctoral Dissertations

To take full advantage of multilevel modular converter (MMC) and extend its application in high voltage direct current (HVDC) transmission systems, the ability to deal with severe unbalanced conditions, especially under single-line-to-ground (SLG) fault, is a key requirement.

This dissertation deals with the development of a fault handling strategy, which helps HVDC systems achieve continuous energy supply and desired operation performance under temporary SLG fault conditions while ensuring a smooth and fast black start for MMC-HVDC particularly if the system has to shut down when a permanent SLG fault occurs. Several related research topics will be discussed in this dissertation. …

Wide-Area Synchrophasor Measurement Applications And Power System Dynamic Modeling, Yin Lei

Doctoral Dissertations

The use of synchrophasor measurements system-wide has been providing significant assistance for grid dynamic monitoring, situation awareness and reliability improvement. Frequency Monitoring Network (FNET), as an academia-run synchrophasor measurement system, utilizes a large number of Internet-connected low-cost Frequency Disturbance Recorders (FDRs) installed at the distribution level to measure power system dynamics and provide both online and off-line applications, such as event detection, oscillation modes estimation, event replay, etc. This work aims to further explore applications of the FNET measurements and utilize measurement-based method in dynamic modeling.

Measurement-based dynamic reduction is an important application of synchrophasor measurement, especially considering the fact …

An Economical Model Development For A Hybrid System Of Grid Connected Solar Pv And Electrical Storage System, Mohammad Hasan Balali

Theses and Dissertations

Energy sources management is one of the most important concern in the recent decades. There are finite amount of non-renewable energy sources and one day they will run out if they have been used as primary sources of energy. Renewable energy sources have been significantly reduced the environmental effects. For most of them the source of energy is non-depletable.

One of the concerns associated with renewable resources is uncertainty or unavailability. Energy Storage Systems (ESSs) can help to have more reliable and more efficient systems by adjusting the charge and discharge time and rate. In this study, an economic model …

Dual-Input Dc-To-Dc Converter Topologies And Control Schemes, Shaun Alan Stickel

Boise State University Theses and Dissertations

Dual-input DC-to-DC converters are power supplies that draw power from two sources simultaneously and deliver power to a single load, the ratio of power drawn from each source and be held constant with changes in the load. Applications for dual-input power supplies are computer systems, mobile systems using energy harvesting, and systems needing redundant power supplies. This writing covers the operation and control of dual-input DC-to-DC converters that implement a non-inverting buck-boost function and utilize only a single power path.

Traditionally, a dual-input power supply is created by placing two standard power paths in parallel. This adds considerable control complexity …

Dividing And Conquering Meshes Within The Nist Fire Dynamics Simulator (Fds) On Multicore Computing Systems, Donald Charles Collins

Masters Theses

The National Institute for Standards and Technology (NIST) Fire Dynamics Simulator (FDS) provides a computational fluid dynamics model of a fire, which can be visualized by using NIST Smokeview (SMV). Users must create a configuration file (*.fds) that describes the environment and other characteristics of the fire scene so that the FDS software can produce the output file (*.smv) needed for visualization.The processing can be computationally intensive, often taking between several minutes and several hours to complete. In many cases, a user will create a file that is not optimized for a multicore computing system. By dividing meshes within the …

Adaptation Of Moiré Phase Tracking To A Mobile Device For Field 3d Data Collections, Amar Nikhanj

Theses and Dissertations

The accelerating technologies of mobiles devices such as tablets and phones provide an ability to

perform high intensity calculations all while obtaining precise data with increasingly more accurate

sensors. Image metrology and 3D motion tracking can take advantage of these improvements as

they require both significant processing power and camera controls not seen in mobile devices until

very recently. This thesis discusses the development of 3D motion tracking using Google Nexus

tablets and applying the technology to the Rapid Upper Limb Assessment (RULA) to demonstrate

the technology’s application to field measurements. RULA analysis determines the stress placed on

a human …

8 Bit Split Array Based Charge Scaling Digital To Analog Converter With Rail To Rail Buffered Output, Sai Kiran Akula

Graduate Theses and Dissertations

This thesis presents the design, simulation and layout of a silicon carbide (SiC) 8 bit split array charge scaling digital to analog convertor (DAC). The converter consists of the charge scaling capacitor chain with two operational trans-conductance amplifiers (op amp) in voltage follower configuration. The op amps used in the design have the input common mode ranges of 0 to 11.2 V and 4.7V to 14.5V respectively. Additional logic circuit topologies are designed, which help to switch the op amps when needed to provide a rail to rail unity gain at the output. As the design is based on the …

Mohat Tool To Illustrate Diode And Transistor Modes Of Operation Using Ltspice, Getu D. Engdaw

Electrical Engineering

This project develops a tool to identify the modes of operation of diodes and transistors in a circuit. The MoHAT tool receives schematics or circuit files generated from LTspice, and it determines the state of each diode and transistor. This tool illustrates diodes, BJT and MOS regions of operations using text or graphics accordingly. The tool also suggests necessary adjustments to switch from one mode of operation to another upon users request. Furthermore, the tool specifies if a transistor functions in amplification region. The MoHAT tool compares the nodal voltages of an element and determines the mode of operation.

Midfield Rf Signal Detector, Dawei Zhang

Electrical Engineering

This project is part of a Master’s thesis which looks at alternative ways to measure blood glucose. The Master’s thesis uses mid-field signals in order to match impedance and therefore lose less power as they travel through flesh. The goal of this senior project is to build a receiver for those signals and give accurate RSSI (received signal strength indicator) measurements. Mid-fields were originally explored by Stanford professor Dr. Ada Poon [3] who used the signaling technique to recharge the batteries of deeply implanted devices. Devices implanted near the surface of the skin were able to have their batteries recharged …

Design And Development Of A Wearable Wireless Health Monitoring System: A Smart Watch Approach, Keerthi Paranikumar

Graduate Theses and Dissertations

According to Statistics, every year, about 610,000 people die because of heart disease in United States of America. (i.e. 1 in every 4 deaths.*) Heart disease is common for both men and women. Annually, about 370,000 people die because of coronary heart disease, which is the most common type of heart disease [1]. About 735,000 Americans have heart attack every year. In this, 210,000 people gets heart attack who already has heart problems and 525,000 people get heart attack for the first time [2]. Not many people know that they have heart problems. Around 47% of the people in United …

Epitaxial Growth Of Si-Ge-Sn Alloys For Optoelectronic Device Application, Aboozar Mosleh

Graduate Theses and Dissertations

Microelectronics industry has experienced a tremendous change over the last few decades and has shown that Moore’s law has been followed by doubling the number of transistors on the chip every 18 months. However, continuous scaling down of the transistors size is reaching the physical limits and data transfer through metal interconnects will not be able to catch up with the increasing data processing speed in the future. Therefore, optical data transfer between chips and on-chip has been widely investigated. Silicon based optoelectronics has received phenomenal attention since Si has been the core material on which microelectronic industry has been …

High-Frequency Transformer Design For Solid-State Transformers In Electric Power Distribution Systems, Roderick Javier Garcia Montoya

Graduate Theses and Dissertations

The objective of this thesis is to present a high- or medium-frequency transformer design methodology for Solid-State Transformer (SST) applications. SSTs have been proposed as a replacement of the traditional 50/60 Hz transformer in applications demanding high-power density. Moreover, due to the high penetration of distributed generation, DC grids, energy storage systems, and sensitive loads, SSTs have been considered as an enabling technology for envisioned future energy systems. These applications demand additional functionalities that may not be achieved with traditional transformers. For example, active power flow control, harmonic suppression, voltage regulation, voltage sag compensation, and reduced size and volume.

In …

Solar Powered Picnic Table For Charging Cellphones And Other Small Devices, Casey B. Potts

Electronic Theses and Dissertations

Solar panels are used in many different applications for generating sustainable energy. Many countries use solar power as a power generation method. It is also, an excellent option for getting power to difficult areas. There are three main systems used when generating solar power: grid-tied, battery banked, and direct driven systems. Most systems use a combination of grid-tied and battery banked so any unused power can be fed back into the main grid for compensation. The solar power application suggested in this thesis will provide USB power to a picnic table enabling students to charge cellphones and other small devices …

Scaled Synthetic Aperture Radar System Development, Ryan K. Green

Master's Theses

Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted to generate high resolution images. Linear frequency modulated signals are transmitted and received while a moving imaging platform traverses a target area to develop high resolution images through modern digital signal processing (DSP) techniques. The motivation for this joint thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Objectives include …

Eeg-Controlling Robotic Car And Alphabetic Display By Support Vector Machine For Aiding Amyotrophic Lateral Sclerosis Patients, Quang M. Le

Electrical Engineering Undergraduate Honors Theses

This thesis presents the design and experiment of a system that can detect the human thinking such as driving directions and letters using the brainwave signals known as electroencephalogram (EEG) and a machine learning algorithm called support vector machine (SVM). This research is motivated by amyotrophic lateral sclerosis (ALS) disease which makes patients seriously lose mobility and speaking capabilities. The developed system in this thesis has three main steps. First, wearing EPOC headset from Emotiv Company, a user can record the EEG signals when he/she is thinking a direction or a letter, and also save the data in a personal …

Model Development And Validation For Wind Generation Transmission Systems, Mahmood Shihadeh Saadeh

Graduate Theses and Dissertations

In this research a new benchmark system is proposed for wind energy transmission systems. New model development, validation, and calibration methods for power transmission systems are proposed and implemented as well. First, a model reduction criteria is chosen based on electrical interconnection and geographical information. Model development is then done using reduction techniques on an operation model provided by a transmission operator based on the chosen criteria. Then model validation is performed using actual PMU synchrophasor measurements provided by a utility company. The model development and validation process ensures the accuracy of the developed model and makes for a realistic …

Implementation Of A Neuromorphic Development Platform With Danna, Jason Yen-Shen Chan

Masters Theses

Neuromorphic computing is the use of artificial neural networks to solve complex problems. The specialized computing field has been growing in interest during the past few years. Specialized hardware that function as neural networks can be utilized to solve specific problems unsuited for traditional computing architectures such as pattern classification and image recognition. However, these hardware platforms have neural network structures that are static, being limited to only perform a specific application, and cannot be used for other tasks. In this paper, the feasibility of a development platform utilizing a dynamic artificial neural network for researchers is discussed.

Water Withdrawal And Consumption Reduction Analysis For Electrical Energy Generation System, Narjes Nouri

Theses and Dissertations

There is an increasing concern over shrinking water resources. Water use in the energy sector primarily occurs in electricity generation. Anticipating scarcer supplies, the value of water is undoubtedly on the rise and design, implementation, and utilization of water saving mechanisms in energy generation systems are becoming inevitable. Most power plants generate power by boiling water to produce steam to spin electricity-generating turbines. Large quantities of water are often used to cool the steam in these plants. As a consequence, most fossil-based power plants in addition to consuming water, impact the water resources by raising the temperature of water withdrawn …

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Skybridge: A New Nanoscale 3-D Computing Framework For Future Integrated Circuits, Mostafizur Rahman

Doctoral Dissertations

Continuous scaling of CMOS has been the major catalyst in miniaturization of integrated circuits (ICs) and crucial for global socio-economic progress. However, continuing the traditional way of scaling to sub-20nm technologies is proving to be very difficult as MOSFETs are reaching their fundamental performance limits [1] and interconnection bottleneck is dominating IC operational power and performance [2]. Migrating to 3-D, as a way to advance scaling, has been elusive due to inherent customization and manufacturing requirements in CMOS architecture that are incompatible with 3-D organization. Partial attempts with die-die [3] and layer-layer [4] stacking have their own limitations [5]. We …

Charging Level And Deposition Of Droplets In Electrostatic Painting, Husam Osman

Electronic Thesis and Dissertation Repository

The process of electrostatic painting has become a very important method of coating in a wide range of industrial applications including those used in the automobile industry. The general principle of spray coating is to deposit liquid droplets or solid powder particles on coated targets having various shapes. The electrostatic coating process consists of three main stages: droplet formation and charging, transportation and deposition. The complication of this process is caused by various factors, such as the physical properties of the material to be used, the appropriate electrical and mechanical conditions and the target surface to be coated, which affects …

Multi-Mode Analysis Of Dual Ridged Waveguide Systems For Material Characterization, Jason G. Crosby

Theses and Dissertations

In this dissertation, two nondestructive dual ridged waveguide (DRWG) material characterization systems are investigated. The single and clamped DRWG probe geometries were analyzed in previous work; however, that research only incorporated the dominant DRWG mode. Here, that restriction is removed and the existence of evanescent higher- order modes is considered. Theoretical analysis of the single and clamped DRWG probes is presented and discussed. The approach taken here is similar to that presented in previous research: Love's equivalence theorem is used to remove the DRWG apertures which are replaced with equivalent magnetic currents radiating in the presence of the background parallel-plate …

Novel Applications Of A Thermally Tunable Bistable Buckling Silicon-On-Insulator (Soi) Microfabricated Membrane, Robert A. Lake

Theses and Dissertations

Buckled membranes are commonly used microelectromechanical systems (MEMS) structures. Recent work has demonstrated that the deflection and stiffness of these membranes can be tuned through localized joule heating. These devices were implemented into the design and fabrication of two novel device applications, a tunable pressure sensor and a steerable micromirror. A differential pressure across the membrane causes de reflection, up or down, which can be measured and related to a specific pressure. By tuning the stiffness of the membrane, its pressure response is varied providing a wider range of application for the pressure sensor. A 2.0mm by 2.0mm square membrane …

Secondary Electrohydrodynamic Flow Generated By Corona And Dielectric Barrier Discharges, Mohammadreza Ghazanchaei

Electronic Thesis and Dissertation Repository

One of the main goals of applied electrostatics engineering is to discover new perspectives in a wide range of research areas. Controlling the fluid media through electrostatic forces has brought new important scientific and industrial applications. Electric field induced flows, or electrohydrodynamics (EHD), have shown promise in the field of fluid dynamics. Although numerous EHD applications have been explored and extensively studied so far, most of the works are either experimental studies, which are not capable to explain the in depth physics of the phenomena, or detailed analytical studies, which are not time effective. The focus of this study is …

Rfid Microscope Lab, Patricia Carranza

Computer Engineering

The RFID Microscope Lab is a new exhibit created for the San Luis Obispo Children's Museum. The goal of the project is to create a modern, interactive exhibit that will teach children about different natural specimens through the use of technology. A computer, custom software, and RFID technology, will be used to display facts, microscopic images, and short videos of ten different specimens.

Modeling The Controlled Delivery Power Grid, Vinit Madhukar Sahasrabudhe

Theses

Competitive energy markets, stricter regulation, and the integration of distributed renewable energy sources are forcing companies to reengineer energy production and distribution. The Controlled Delivery Power Grid is proposed as a novel approach to transport energy from generators to consumers. In this approach, energy distribution is performed in an asynchronous and distributed fashion. Much like the Internet, energy is delivered as addressable packets, which allow a controlled delivery of energy.

As a proof-of-concept of the controllable delivery grid, two experimental test beds, one with integrated energy storage and another with no energy storage, were designed and built to evaluate the …

Smart Pv Inverter Control For Distribution Systems, Ehsan M. Siavashi

Electronic Thesis and Dissertation Repository

PV solar systems employ inverters to transform dc power from solar panels into ac power for injecting into the power grids. Inverters that perform multiple functions in addition to real power production are known as “smart inverters”.

This thesis presents a novel control of PV inverter as a dynamic reactive power compensator – STATCOM. This “smart PV inverter” control enables a PV solar inverter to operate in three modes – i) Full PV, ii) Partial STATCOM, and iii) Full STATCOM, depending upon system needs. The novel control is developed and demonstrated for the objectives of a) symmetrical voltage regulation, b) …