Food Science Commons^™

Progress In Research Of Mycelial Morphology Control Of Filamentous Fungiin Submerged Fermentation, Jiang Xuewei, Li Hao, Yang Chen, Xu Yantao, Luo Xiaoming

Food and Machinery

Filamentous fungi are widely used in industrial fermentation. Its mycelial morphology is closely combined with objective product yield and fermented liquid viscosity, and it is one of the key factors in the fermentation process control. In this paper, the research progress was reviewed on the mycelia of filamentous fungi in the submerged fermentation,including its morphological characteristics, the analysis and characterization methods, the mechanism of mycelial pellet formation, and the influence of mycelial morphology control in fermentation. Therefore, the author indicated that quantitative description the growth of filamentous fungi was the foundation of precision control on fermentation process.

Research Progress On Preparation Of Nano-Starch And Its Application In The Preparation Of Edible Films, Zhou Yujia, Xiao Qian, Deng Fangming

Food and Machinery

Nano-composite natural polymer based film not only have low energy consumption, ease the pollution to environment and the pressure on the dying up raw material of non-degradable synthetic material, but also realized the sustainable development of resources. Because of the enhancement of nano particles, the composite film shows more unique and excellent properties than conventional edible film, with low cost, rich available, regenerative and less pollution. Reviewed methods on the preparation of nano starch at home and abroad, including the, physical and chemical methods. Described the application in nano-composite edible films briefly, and summarized the researches on the improvement of …

Food Leftover Practices Among Consumers In Selected Countries In Europe, South And North America, Kadri Koppel, Federica Higa, Sandria Godwin, Nelson Gutierrez, Roman Shalimov, Paula Cardinal, Brizio Di Donfrancesco, Miriam Sosa, Angel A. Carbonell-Barrachina, Loreida Timberg, Edgar Chambers Iv

Human Sciences Faculty Research

Foodborne illnesses may be related to many food production factors with home practices of consumers playing an important role in food safety. Consumer behavior for handling food leftovers has been studied, however little work on comparisons among countries has been published. The objective of this study was to investigate home food leftover practices of people from North American, South American, and European countries. Surveys were conducted with approximately 100 or more consumers in Argentina, Colombia, the United States, Estonia, Italy, Russia, and Spain. The participants responded to questions related to the length of time different types of food leftovers; such …

Urban Agriculture As Embedded In The Social And Solidarity Economy Basel: Developing Sustainable Communities, Isidor Wallimann

Program for the Advancement of Research on Conflict and Collaboration

The Social and Solidarity Economy (SSE) is a viable strategy in dealing with some contemporary problems known both in industrial and developing countries. Addressed is how local populations could reach certain objectives and satisfy certain needs using techniques characteristic of SSE and, thus, carve out a social and economic space of their own vis-à-vis anonymous markets, global actors, local and national elites. Illustrated further is this strategy on the example of Urban Agriculture Basel, a unit of the Social Economy Basel. Within this self governed space, it is suggested, a path can be laid for the necessary transition towards local, …

Ua12/2/1 Healthy Living Guide, Wku Student Affairs

WKU Administration Documents

Special magazine published by the College Heights Herald.

• Collins, Emma. Six Ways to Learn Healthy Eating in Your Dorm
• Austin, Emma. Preston Health & Activities Center Accommodates Users of Varied Abilities
• Henderson, Andrew. If Five Campus Restaurants Had Personality Types
• Burgess, Kelly. How to Make a Light & Fresh Quinoa Fruit Salad
• Carlson, Kylie. New Boxing Gym Swings into Bowling Green – BGKY Boxing
• Adams, Julia. Students Open Discussion on Mental Health
• Healthier Eating with a Meal Plan
• Kast, Monica. Gluten & Allergy Free Station to Open in Fresh – Dining Services
• Sims, Adam. Students Develop Personal Workout Routines
• Cole, …

Breeding Of Temperature-Sensitive Mutant From Saccharomyces Cerevisiae, Yue Xijie, Jiang Xuewei, Luo Xiaoming, Zhou Hui, Liu Yongle, Chen Daiwen, Zhou Zhiming

Food and Machinery

In order to obtain the efficient secretion of intracellular product in yeast, as the original strain,Saccharomyces cerevisiae (2n), (n) were mutagenized with UV treatment, five mutants strain may have temperature-sensitive were selected. To further identify, Y₁ was used as the control bacterium, and its content of extracellular nucleic acids, proteins and FDP were determined, find that the highest degree of autolysis was Ts₄(2n), it’s content of nucleic acid and protein in extracellular environment were 1.709, 1.483, the concentration of FDP in extracellular environment was 38μg/mL, higher than Y₁ 24.1%. Ts^*₂ (n) and Ts^{* …}

Influence Of Different Conditions On Mass Transfer Kinetics Of Rabbit Meat During Wet-Curing, He Cui, Xia Yangyi, Zhang Yan, Su Yan

Food and Machinery

The influence of different curing conditions including brine concentration (6%, 10%, and 15%), temperature (4, 15, and 25 ℃) and stirred on mass transfer kinetics of fresh rabbit meat during wet-curing was analyzed. The results showed that the changes of water (ΔMwt), salt content (ΔM^NaClt) and weight (ΔM0t) had good correlation with the square root curing time (t^0.5) in different curing conditions, and k₂ was affected by brine concentration, temperature and stirring. Our results showed that the brine concentration of 10% could cause the highest diffusion value (1.18×10^-9 m²/s) ,and the biggest …

The Analyses On Chemical Components In The Leaf Volatile Oils Of Zephyranthes Candida（Lindl.）Herb. And Their Antimicrobial Activities In The Fresh Milk, Wei Qiang, Shi Xuefeng

Food and Machinery

Two kinds of volatile oil were extracted by steam distillation extraction (SDE) and supercritical fluid extraction of CO2 (SFE-CO2), and then they were identified by gas chromatography-mass spectrometry (GC—MS). The antimicroble effects of the extract on different rot funguses in fresh milk was evaluated in 4 ℃ within 10 days. There were 39 different components in the two kinds of volatile oil, including methyl cyclohexane, octacosane, 1,3-dimethyl-benzene, and dibutyl phthalate mainly found in the SDE volatile oil, and 4-(4-ethylcyclohexyl)-1-pentyl-cyclohexene, toluene, 1,2-benzenedicar-boxylic acid, diisooctyl ester, 1-ethoxy-pentane, 2-methoxy-4-vinylphenol, and 2,4-bis(1,1-dimethylethyl)-phenol mostly presented in the SFE-CO2 volatile oil. The differences among the contents …

Analysis Of Aroma Components Ingeranium Oil By Gc/Ms Combined With Retention Index, Li Yuandong, Li Xianyi, Duan Yanqing, Liu Xiuming, Dangl Izhi, Huang Libin

Food and Machinery

The aroma components of geranium oil were analyzed by GC/MS, and the peak area normalization method was used to calculate the relative content of each component. With the mass spectrometry library search, 61 compounds which account for 86.217% in the aroma components of geranium, were identified by using reference literature retention index. The cis(trans)-isomers were confirmed by using retention index, and the accuracy of compound qualitative analysis in natural flavor was improved. The aroma of the key aroma compositions of the geranium oil (Citronellol, Geraniol, Citronellyl formate, Menthone, Geranyl formate, Isomenthone, Geranyl tiglate, Rose oxide, Geranyl butyrate, et al) was …

The Establishment Of Characteristic Fingerprints Of Faint-Scent Cigarettes, Ying Fei, Song Shiqing, Zhang Xiaoming

Food and Machinery

In order to test the quality and characteristics of faint-scent cigarettes by the technology of GC—MS and electronic nose fingerprint, the method of SDE combined with GC—MS and electronic nose were used to construct their standard and radar fingerprints. Samples of non faint-scent cigarettes were selected to study the standard fingerprint. Results of similarity calculation showed that six batches of faint-scent cigarettes had a much higher similarity with the standard fingerprint, and the extent similarity was more than 85%, while the other six batches of non faint-scent ones had a lower similarity. This indicated that the faint-scent and non faint-scent …

Measurement Characteristics Analysis Of Microwave Cigarette Density Distribution Detector, Liu Minchang, Liu Yang, Wen Ruoyu, Zeng Jian, Zhao Weiyi

Food and Machinery

In order to analyze the measurement characteristics of microwave cigarette density distribution detector, the effects of types, width and position of tipping paper, and filling length of filter rod were studied. In this paper, the sample making method that can effectively reduce the measurement error is proposed, and the relationship model between measurement value and filling length of filter rod is also established. Our results showed that the detection accuracy can be theoretically improved by reducing the thickness of the microwave cavity, and this provides a new clue for further optimizing the detector of microwave cigarette density distribution.

Wide-Scope Screening Of Multiple And Illegal Additives In Foods By High Performance Liquid Chromatography-High Resolution Mass Spectrometry, Zhang Fan, Yan Hongfei, Dai Jieyun, Wu Bo, Huang Zhiqiang, Zhang Ying, Wang Meiling

Food and Machinery

A method was developed screening, confirming and quantifying multiple additives and banned dyes in wine, juice and other beverages by liquid chromatography-ion trap-time of flight tandem mass spectrometry (LC-MS-IT-TOF). The accurate and multiple-stage mass spectrometry database of 41compounds was established. The analytes in samples were diluted with water-methanol (v/v). In the chromatographic analysis, target compounds were separated on a C₁₈ column (150 mm × 4.6 mm, 5 μm) with the gradient elution using the mobile phases of methanol and 2 mM ammonium acetate. The results showed that the limits of detection were 0.005～1.0 mg/kg. The method validation was carried …

Study On Typical Volatiles Of Rice Contaminated By Aspergillus Flavus During Storage, Ren Jiali, Tang Yunpeng, Zhang Ziying, Zhou Chao

Food and Machinery

A headspace-solid phase microextraction/gas chromatography-mass spectrometry (HS—SPME/GC—MS) was used to analyze the volatiles of rice contaminated with Aspergillus flavus and their ion chromatograms were obtained. Combined TurboMass and NIST Search software, 26 volatile metabolites were identified in rice contaminated with Aspergillus flavus, including five kinds of aldehydes, six kinds of alcohols, one kind of ketone, nine kinds of hydrocarbons, one kind of ester, one kind heterocyclic, one kind of organic acid, one kind of amine. Based on aflatoxin catabolism and substance transformation in the rice, 2-hydroxy inferred-propionamide and Heptaldehyde are typically volatile component group, which would be used as typical …

Determination Of 5 Heavy Metal Elements And 15 Rare-Earth Metal Elements In Dark Tea, Chen Xiong, Fang Xuanyi, Dai Xuan, Chen Tiebi, Liu Xiaowen, Li Wenyi

Food and Machinery

Under the optimized conditions, the samples were analyzed by ICP—MS with the triple internal standard elements Rh, In and Re. Good linearity of standard curves of twenty elements were obtained, and all the linear coefficient of them were above 0.999. The detection limits were in the range of 0.001 2～0.10 ng/mL. GBW10052-green tea, the certified reference material was analyzed and the results showed good agreement with the certified values. Five dark tea samples were determined by the proposed method. In the recovery experiment controlled by adding stand substance, the recoveries were range from 92% to 105%. It was indicated that …

Application Of Ionic Liquids In The Detection Of Antibiotic Negative Milk, Zhou Xinkui, Hong Xia, Qian Yingwen, Deng Lijuan, Wang Jiebin, Gao Zhiying, He Haining, Liu Qi

Food and Machinery

Hydrophobic ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate [(C₈MIM) (PF₆)] was synthesized using metathesis method, and then the ionic liquid was purified by activated carbon and macroporous resin solid phase extraction column, to get a colorless, transparent product [(C₈MIM) (PF₆)] with a yield of 87.6%. The ionic liquids was used to extract penicillin and penicillin-thiazole acid hydrolysates in milk and dairy products, and its extracting condition was optimized. After that the content of penicillin and penicillin thiazole acid were detected by utilizing self-developed HPLC method, and it could be indirectly determined whether the milk and …

Quality Control Of Reagent In Food Microbiology Laboratory, He Yan, Yang Tao, Peng Shifu

Food and Machinery

As the indispensable supplies in food microbiology laboratory test, reagent supplies' quality directly affects the accuracy of the test results. To provide guidance for reagent supplies quality control, this article comprehensively analyzes the quality control of food microbiology laboratory from the respect of procurement, quality inspection & acceptance of appearance and immanency, storage, use, etc, and especially focus on internal quality acceptance of commercial medium and reagent.

Study On The Performance Of Heat Transfer Enhancement Of New Convex Groove Stirred Tank With Two Impellers, Xu Xiaoguang, Zhang Lin, Su Zhaolong, Jia Wenyi, Hu Meirong, Wu Xuehong

Food and Machinery

In this paper, based on the traditional steam heating stirred tank, a new type tank is presented with low wall temperature and convex groove. The performance of heat transfer and fluid flow is studied using detached eddy model. The results show that the velocity near the rotor area is large. The velocity in static area is uniform. Due to the small interaction between the upper and down blades, there have four cycle vortex in the tank, which are two parallel vortexes near each blade. When the speed of impeller N=96 r/min, the wall temperature is 358 K to heating 293 …

The Design And Finite Element Analysis Of The Adlay Grindingplate Sheller, Hu Zhigang, Zhang Yonglin, Hou Chuanliang, Liu Jun

Food and Machinery

A new method of adlay shelling was presented to design a sheller. The adlay shelling technology that a mutual friction between grinding wheel and nylon wheels horizontally placed shell adlay was used. Moreover, the three-dimensional structure of sheller was designed, and the main parts of machine were also checked. Furthermore, in order to prevent the occurrence of resonance, ANSYS modal analysis of the body and the frame were carried out. The prototype of Adlay shell test results showed that the raw material processing capacity was 0.3 t/h, the shelling rate was greater than 95%, the whole kernel rate was more …

Design And Test Of Hot Pressing Extraction Equipment With Composite Rotary Agitation And Auto-Discharging For Bone Extract, Wu Ting, Jia Wei, Zhang Chunhui, Li Xia, Guan Sheng, Han Ling, Yu Qunli

Food and Machinery

Design a type of hot pressing extraction equipment with composite rotary agitation and auto-discharging, which consists of three parts: tank, composite rotary agitation device and feeding device. The equipment is a horizontal stirring extraction, to avoid the problem that the extract is mixed with the solid material irregularity in conventional extraction method, and greatly increase the heating rate and extraction efficiency. Propelled scraper agitator and mixing paddle type impeller installed spaced equidistant, and the motor can forward and reverse, which make the extraction process and the process of tapping automatic. The use of two dimensional heating via jacket and stirring …

Design Of The Mechanism Principle Of The New Green Walnut Peeling Machine, Zhao Jingtao, Shang Pengxu, Wu Xiaoxue, Fang Ye

Food and Machinery

The peeling machine is mainly used for separation of the green walnut green and walnut, using a single walnut peeling process, along with cutting through broken skin, torsion straining, and casting skin process. In order to realize the continuous feeding and discharging, a special kick-off device was designed, by utilizing a series of repeat actions, including rotation-depression-torsion-reduction, finally achieve the separation of the green walnut pericarp from walnut. It turned out that the mechanical structure was compact and easy to operate as well as the knifes were systematized. Therefore, the appropriate tool can be replaced according to the specific utilization. …