Structural Biology Commons^™

Model File Name: 1ehz-Trna(Thin-Big).X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1ehz-tRNA(thin-big).x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of Phe-tRNA in a large, but thin stick-representation (PDB: 1ehz), designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Full color Phe-tRNA (1ehz)”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following material: Strong & Flexible Plastic.

Model File Name: 1lmb-Dnalong_Fordimer-Test6b.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-DNAlong_fordimer-test6b.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of the 19-bp segment of DNA to which Lambda repressor transcription factor interacts (PDB: 1lmb). It is in a stick representation and has been designed with sites to add magnets to illustrate binding interactions with the transcription factor. Sphere magnets with a 1/8” diameter can be purchased separately from K&J Magnets. The model can interact with the dimer form of the transcription factor. This model is designed to accompany a teaching module illustrating transcription factor-DNA binding. The printable model …

Model File Name: 1lmb-Tfdimer-Mags-Joints-Jnd-Sc1-8-Parts-V4b.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: 1lmb-TFdimer-mags-joints-jnd-sc1-8-parts-v4b.stl

Additional files: 1lmb-Lys-Ser-extras-v4b.stl and 1lmb-TFdimer-Leu-v4b.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a ribbon and stick representation of the transcription factor lambda repressor (PDB: 1lmb). Key amino acid residues are in stick representation to illustrate the interactions between the repressor and the DNA to which it binds. Some of these residues have been designed with sites to add magnets to illustrate these interactions. Sphere magnets with a 1/8” diameter can be purchased separately from K&J Magnets. Some of the residues can be interchanged with other …

Model File Name: Dna-294bp-Magnet-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-294bp-magnet-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (294 bp). The DNA model has small sites on the ends where the user can glue magnets to mimic circular DNA, and to aid in manipulating the model. Disc magnets with a diameter of 1/8” or 1/10” and thickness of 1/16” can be purchased online from K&J Magnetics and glued into the magnet sites. The model is designed to go with a teaching module on DNA supercoiling. The model can …

Model File Name: Dna-294bp-Handle-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-294bp-handle-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (294 bp). The DNA model has small handles on the ends to aid in holding and manipulating the model. The model is designed to go with a teaching module on DNA supercoiling. The model can be accompanied by Nucleosome and H1 histone models to demonstrate DNA packaging in the cell. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “294bp DNA (handles)”. …

Model File Name: Dna-420bp-Handle-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-420bp-handle-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (420 bp). The DNA model has small handles on the ends to aid in holding and manipulating the model. The model is designed to go with a teaching module on DNA supercoiling. The model can be accompanied by Nucleosome and H1 histone models to demonstrate DNA packaging in the cell. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “420bp DNA (handles)”. …

Model File Name: Dnalong-3pc-Lego.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNAlong-3pc-Lego.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a stick representation of the DNA to which the transcription factor lambda repressor binds (PDB: 1lmb). This model can be adapted to accompany a teaching module illustrating transcription factor-DNA binding. The model has been designed in 3 parts that can be joined together by Lego®-style junctions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lego DNA with GCbp”. This model has been printed successfully using these parameters on Shapeways’ laser …

Model File Name: Dna-420bp-Magnet-Supercoil.Stl, Michelle Howell, Karin V. Van Dijk, Kalika Mahato, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-420bp-magnet-supercoil.stl

Authors: Michelle E Howell, Karin van Dijk, Kalika Mahato, Rebecca L Roston

This is a teaching model of a long, thin representation of double stranded DNA (420 bp). The DNA model has small sites on the ends where the user can glue magnets to mimic circular DNA, and to aid in manipulating the model. Disc magnets with a diameter of 1/8” or 1/10” and thickness of 1/16” can be purchased online from K&J Magnetics and glued into the magnet sites. The model is designed to go with a teaching module on DNA supercoiling. The model can …

Model File Name: H1-Protein.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: H1-protein.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a crude representation of an H1-protein intended to accompany the nucleosome and a long, thin double stranded DNA helix model in order to illustrate DNA packaging and supercoiling. This model is designed to go with a teaching module on DNA supercoiling. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Histone H1 protein”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the following materials: Strong …

Model File Name: Dna-Short-Helix.X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: DNA-short-helix.x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a DNA helix in which the atoms are colored by heteroatom (PDB: 1lmb). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions, and with one that studies transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “DNA helix - polynucleotide molecule”. This model has been printed successfully using these parameters on Shapeways’ binder jetting printer in the Coated Full …

Model File Name: Ssdna.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: ssDNA.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a single stranded piece of DNA in stick representation (PDB: 1ehz). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “ssDNA”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Elasto Plastic material.

Model File Name: Nucleosome.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: Nucleosome.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a crude representation of a nucleosome intended to accompany the H1 histone protein and a long, thin double stranded DNA helix model in order to illustrate DNA packaging and supercoiling. This model is designed to go with a teaching module on DNA supercoiling. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Nucleosome”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Strong & Flexible …

Model File Name: Tf-Monomer-Stick.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: TF-monomer-stick.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a ribbon and stick representation of a Lambda repressor transcription factor monomer that accompanies the full color DNA helix (PDB: 1lmb). This model is designed to go with a teaching module illustrating transcription factor-DNA binding. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Lambda TF monomer”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Strong & Flexible Plastic material.

Model File Name: Rna-Short-Helix.X3d, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: RNA-short-helix.x3d

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a DNA helix in which the atoms are colored by heteroatom (PDB: 1lmb). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “RNA helix - polynucleotide molecule”. This model has been printed successfully using these parameters on Shapeways’ binder jetting printer in the Coated Full Color Sandstone material.

Video Guide To Design Flexible Dna.Mp4, Michelle Howell, Karin V. Van Dijk, Christine S. Booth, Tomáš Helikar, Brian Couch, Rebecca Roston

3-D Printed Model Structural Files

Model file name: Video guide to design flexible DNA.mp4

Authors: Michelle E Howell, Karin van Dijk, Christine S Booth, Tomas Helikar, Brian A Couch, Rebecca L Roston

This 30-minute video includes step-by-step instructions to design and 3-D print a long flexible DNA model that mimics the structure and function of DNA. The instructions are applicable for designing the model using open-source 3-D computer graphics software Blender 2.79 which is available for download at https://www.blender.org/download/.

.mp4 file download (70 MB) below.

Model File Name: Ssrna.Stl, Michelle Howell, Karin V. Van Dijk, Rebecca Roston

3-D Printed Model Structural Files

Model file name: ssRNA.stl

Authors: Michelle E Howell, Karin van Dijk, Rebecca L Roston

This is a teaching model of a single stranded piece of RNA in stick representation (PDB: 1ehz). This model is designed to go with a teaching module comparing DNA and RNA basic structures and functions. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “ssRNA”. This model has been printed successfully using these parameters on Shapeways’ laser sintering printer in the Elasto Plastic material.

Model File Name: Helix_H2o_Sphere2.Dae, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

Model file name: Helix_H2O_sphere2.dae

Authors: Michelle E Howell, Rebecca L Roston

This is a teaching model of a space fill representation of a protein α-helix (PDB: 3vjo). A space fill water molecule is also represented to illustrate the lack of space down the axis of an α-helix. This model can accompany a corresponding stick representation, a kinked α-helix, and a β-sheet. This model is designed to accompany a teaching module illustrating protein secondary structure and function. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Helix and Water (Space-fill) …

Model File Name: Beta-Sheet_Rod 0.7.Dae, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

Model file name: beta-sheet_rod 0.7.dae

Authors: Michelle E Howell, Rebecca L Roston

This is a teaching model of a stick representation of a protein β-sheet (PDB: 3vjo). This model is designed to accompany three other α-helix models: a space-fill representation of a straight α-helix, a stick representation of a straight α-helix, and a stick representation of a kinked α-helix. These models accompany a teaching module illustrating protein secondary structure and function. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Beta-sheet_Thick”. This model has been printed successfully using …

Model File Name: Alpha Helix Pro-Gly 0.7.Dae, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

Model file name: alpha helix pro-gly 0.7.dae

Authors: Michelle E Howell, Rebecca L Roston

This is a teaching model of a stick representation of a protein α-helix with proline and glycine residues highlighted (PDB: 3vjo). This model is designed to accompany a straight α-helix in space fill representation, a straight α-helix in stick representation, and a stick β-sheet model as well as a teaching module illustrating protein secondary structure and function. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Alpha Helix_Pro-Gly”. This model has been printed successfully using these parameters …

Model File Name: Alpha Helix 0.7.Dae, Michelle Howell, Rebecca Roston

3-D Printed Model Structural Files

Model file name: alpha helix 0.7.dae

Authors: Michelle E Howell, Rebecca L Roston

This is a teaching model of a stick representation of a protein α-helix (PDB: 3vjo). This model can accompany a corresponding space fill representation, a kinked α-helix, and a β-sheet. These models were designed to accompany a teaching module illustrating protein secondary structure and function. The printable model is already uploaded to Shapeways.com in the MacroMolecules shop under the name “Alpha Helix_Thick”. This model has been printed successfully using these parameters on Shapeways’ binder jetting printer in the Coated Full Color …