Optics Commons^™

Photon Sieve Bandwidth Broadening By Reduction Of Chromatic Aberration Effects Using Second-Stage Diffractive Optics, Christopher M. Tulip

Theses and Dissertations

A photon sieve is a lightweight diffractive optic which can be useful for space-based imaging applications. It is limited by chromatic aberration and a narrow bandwidth. A Fresnel zone plate is used to counteract this effect in a manner similar to that accomplished with a traditional holographic corrector. First, a radiometric analysis established a target for bandwidth improvement. Next, a sieve was designed, fabricated, and characterized. Third, the bandwidth-broadening correction scheme was developed to correct primary chromatic aberration. Finally, a zone plate was designed, fabricated, and tested. Performance of the corrected system was measured over the target bandwidth. The corrected …

Femtosecond Laser Beam Propagation Through Corneal Tissue: Evaluation Of Therapeutic Laser-Stimulated Second And Third-Harmonic Generation, William R. Calhoun Iii

Theses and Dissertations

One of the most recent advancements in laser technology is the development of ultrashort pulsed femtosecond lasers (FSLs). FSLs are improving many fields due to their unique extreme precision, low energy and ablation characteristics. In the area of laser medicine, ophthalmic surgeries have seen very promising developments. Some of the most commonly performed surgical operations in the world, including laser-assisted in-situ keratomileusis (LASIK), lens replacement (cataract surgery), and keratoplasty (cornea transplant), now employ FSLs for their unique abilities that lead to improved clinical outcome and patient satisfaction.

The application of FSLs in medical therapeutics is a recent development, and although …

Model Uncertainty And Test Of A Segmented Mirror Telescope, Luke C. Dras

Theses and Dissertations

The future of large aperture telescopes relies heavily on the development of segmented array designs. Today's monolithic mirror technology has reached a barrier, particularly for space-based telescopes. These large diameter, dense mirrors allow stable high-resolution imaging but are incompatible with optimized space launch. Segmented mirror telescopes are designed to balance lightweight with compact stowage. The structure necessary to support the flexible mirror array often combines isogrid geometry and complex actuation hardware. High-fidelity finite element models are commonly used to economically predict how the optics will perform under different environmental conditions. The research detailed herein integrates superelement partitioning and complexity simplifying …

Direct Emissivity Measurements Of Painted Metals For Improved Temperature Estimation During Laser Damage Testing, Sean M. Baumann

Theses and Dissertations

A database of spectral, temperature dependent emissivities was created for a range of painted aluminum laser damage testing targets with the purpose of improving accuracy in temperature estimates on front and back target surfaces during laser damage tests. Previous temperature estimations were made by fitting an assumed graybody radiance curve to the radiance measured from the back surface via a Telops imaging Fourier transform spectrometer. In this work, spectral emissivity measurements were made using an SOC-100 hemispherical directional reflectometer and Nicolet Fourier transform infrared spectrometer. Of particular interest was a high temperature matte black enamel paint used to coat the …

Range Finding With A Plenoptic Camera, Robert A. Raynor

Theses and Dissertations

The plenoptic camera enables simultaneous collection of imagery and depth information by sampling the 4D light field. The light field is distinguished from data sets collected by stereoscopic systems because it contains images obtained by an N by N grid of apertures, rather than just the two apertures of the stereoscopic system. By adjusting parameters of the camera construction, it is possible to alter the number of these `subaperture images,' often at the cost of spatial resolution within each. This research examines a variety of methods of estimating depth by determining correspondences between subaperture images. A major finding is that …

Comparative Analysis Of Reconstructed Image Quality In A Simulated Chromotomographic Imager, Ryan L. Tervo

Theses and Dissertations

A hyperspectral chromotomographic instrument has been developed to determine the spatial and spectral distribution of a target. It does this by recording the dispersed images produced by a rotating direct vision prism with a high speed camera. The recorded images are processed through a tomographic reconstruction algorithm to produce a reconstructed hypercube. A physics-based system model was developed to investigate three areas. The first was how the prism angle selection and range of angles used impacted the reconstructed image quality. The second was an assessment of a new iterative reconstruction algorithm developed to remove artifacts produced in the Back Projection …

An Investigation Of Electro-Optical 1/F Noise Reduction In An Open-Path Tunable Diode Laser Spectrometer, Samira Adnan Mahdi

Theses and Dissertations

A mobile spectrometer system has been designed to scan the near-surface atmosphere for ammonia gas over a wide range of distances (10 m to 1 Km). Since the system is designed for space applications, it needs to be small, light weight, and low power, which dictates the use of relatively low frequency measurement scans. The spectrometer uses a diode laser, which is subject to a large of electro-optical 1/f noise component at these low frequencies. In this work, digital signal processing techniques are developed to reduce the effects of 1/f noise in gas measurements. A Double Fast Fourier Transform-Based Filter …

An Inverse Kinematic Approach Using Groebner Basis Theory Applied To Gait Cycle Analysis, Anum Barki

Theses and Dissertations

Kinematics of the human body was researched for the purposes of this study. The force protection issues of today was the motivation to research pattern recognition in the human gait cycle to identify individuals carrying a concealed load on their body. The goal of this research was to identify gait signatures of human subjects and distinguish between subjects carrying a concealed load to subjects without load. Thus, this research was focused on studying the human gait cycle as well as methods used in identifying gait signatures. The main focus herein is concerned with the movement of the lower extremities, in …

Development Of A Spectropolarimetric Capability, Evan J. Carlson

Theses and Dissertations

A Bomem 200 series Fourier transform infrared spectrometer and FLIR Systems Inc InGaAs infrared (IR) camera was used to measure the degree of linear polarization (DOLP) from a metal and glass surfaces. This was accomplished by placing a wire grid polarizer in front of the aperture of the FTIR and IR camera to measure the polarized reflection from the target material. For the IR camera, an average of pixel counts was collected over the area of the target to measure to DOLP. Factors impacting the accuracy of the measurements from the FTIR are calibration, instrument self emission, and alignment error. …

Development And Characterization Of A Chromotomosynthetic Hyperspectral Imaging System, Randall L. Bostick

Theses and Dissertations

A chromotomosynthetic imaging (CTI) methodology based upon mathematical reconstruction of a set of 2-D spectral projections to collect high-speed (100 Hz) 3-D hyperspectral data cube has been proposed. The CTI system can simultaneously provide usable 3-D spatial and spectral information, provide high-frame rate slitless 1-D spectra, and generate 2-D imagery equivalent to that collected with no prism in the optical system. The wavelength region where prism dispersion is highest (500 nm) is most sensitive to loss of spectral resolution in the presence of systematic error, while wavelengths 600 nm suffer mostly from a shift of the spectral peaks. The quality …

Discrimination Of Neutral Postures In Computer Based Work, Alanna R. Keith

Theses and Dissertations

A biometric system recognizes users based on the way they physically interact with the system. In this work, we discover a common behavior that a typist consistently displays in non-trivial computer work. We sought to demonstrate three objectives: first, compelling proof that a user can be actively recognized over the course of a lengthy task via a neutral posture struck multiple times in that task; two, a sensing concept for capturing the neutral posture, and, third, an objective method for determine the level of work performed by each typist. This thesis develops a model for hand tracking using a simple …

Cross Hallway Detection And Indoor Localization Using Flash Laser Detection And Ranging, Istvan M. Prileszky

Theses and Dissertations

A flash LADAR is investigated as a source of navigation information to support cross-hallway detection and relative localization. To accomplish this, a dynamic, flexible simulation was developed that simulated the LADAR and the noise of a LADAR system. Using simulated LADAR data, algorithms were developed that were shown to be effective at detecting cross hallways in simulated ideal environments and in simulated environments with noise. Relative position was determined in the same situations. A SwissRanger SR4000 flash LADAR was then used to collect real data and to verify algorithm performance in real environments. Hallway detection was shown to be possible …

Implementation Of Branch-Point-Tolerant Wavefront Reconstructor For Strong Turbulence Compensation, Michael J. Steinbock

Theses and Dissertations

Branch points arise in optical transmissions due to strong atmospheric turbulence, long propagation paths, or a combination of both. Unfortunately, these conditions are very often present in desired operational scenarios for laser weapon systems, optical communication, and covert imaging, which suffer greatly when traditional adaptive optics systems either cannot sense branch points or implement non-optimal methods for sensing and correcting branch points. Previous research by Pellizzari presented a thorough analysis of various novel branch point tolerant reconstructors in the absence of noise. In this research a realistic model of the Air Force Institute of Technology's adaptive optics system is developed …

Application Of An Imaging Fourier-Transform Spectrometer For The Means Of Combustion Diagnostics, Michael R. Rhoby

Theses and Dissertations

A passive remote sensing technique for accurately monitoring the combustion efficiency of petrochemical flares is greatly desired. A Phase II DOE-funded SBIR lead by Spectral Sciences, Inc. is underway to develop such a method. This paper presents an overview of the progress of AFIT's contribution. A Telops Hyper-Cam Mid-wave infrared imaging Fourier-transform spectrometer is used to examine a flame produced by a Hencken burner. Ethylene fuel was burned at four different equivalency ratios φ = 0:80; 0:91; 1:0 and 1:25. Presented is qualitative spectrally-resolved visualization of a Hencken burner flame and the spatial distribution of combustion by-products. The flame spectra …

Matrix Determination Of Reflectivity Of Hidden Object Via Indirect Photography, Simon S. Ferrel

Theses and Dissertations

Indirect photography is a recently demonstrated technique which expands on the principles of dual photography and allows for the imaging of hidden objects. A camera and light source are collocated with neither having line-of-sight access to the hidden object. Light from the source, a laser, is reflected off a visible non-specular surface onto the hidden object, where it is reflected back to the initial non-specular surface and collected by the camera. This process may be repeated numerous times for various laser spot positions to yield slightly different camera images due to a variation in the illumination of the object. These …

Electrical And Optical Characterization Of Si-Ge-Sn, Merle D. Hamilton

Theses and Dissertations

The electrical characterization of boron-doped p-Si_0.08Ge_0.90Sn_0.02/p-Ge(100) and p-Si_0.112Ge_0.86Sn_0.028/n-Si(100) with various epilayer thicknesses was measured using the Hall effect. The room temperature sheet carrier concentration ranged from 1.21 x 10¹³ – 1.32 x 10¹⁶ cm^-2. The room temperature mobilities were measured to be between 166 and 717 cm²/V·s, depending on sample composition. In the low temperature regime, the mobility was mainly affected by ionized impurity scattering. In the high temperature regime, the mobility was mainly affected by …

The Focusing Of Light Scattered From Diffuse Reflectors Using Phase Modulation, Jessica M. Schafer

Theses and Dissertations

“Indirect photography" was recently demonstrated for imaging hidden scene information through the collection and radiometric modeling of light reflecting off of visible reflecting surfaces. The ability to focus the beam that reflects off the visible surface to a tight spot on the hidden object is theorized to simulate a direct line of sight from the light source to the object, reducing the radiometric model to that of the previously demonstrated dual photography. Experiments involving the focusing of light transmitted through highly scattering media have been adapted to the case of reflection. The focusing of a HeNe laser reflected off diffusely …

Characterization Of A Hyperspectral Chromotomographic Imaging Ground System, Chad B. Su'e

Theses and Dissertations

A field-deployable hyperspectral chromotomographic imager has been developed and tested as a risk-reduction prototype to assist design of a space-based system. The instrument uses a high-speed video camera looking through a rotating direct-vision prism to simultaneously observe the full field of view in all visible wavelength channels. The chromotomographic process multiplexes the spectral and spatial so an advanced reconstruction algorithm is required to separate the spectral channels. A physics-based model of the instrument was developed to assist in future trade-space choices for design of the spaced-based system. Additionally, the model is used for the development and assessment of the filtered …

Fdtd Simulation Of Novel Polarimetric And Directional Refelectance And Transmittance Measurements From Optical Nano- And Micro-Structured Materials, Spencer R. Sellers

Theses and Dissertations

The basic physics of nano-/micro-structured materials must be categorized through measurements and simulation to fully understand their scatter dependence on polarization and angle on incidence before they can be considered for war fighter applications. The off-normal incidence and polarization dependant scatter for a guided-mode resonance filter (GMRF) and a surface plasmonic polariton (SPP) extraordinary transmission filter is measured. The measurements are compared to finite-difference time domain (FDTD) simulations. The GMRF is found to exhibit extraordinary angular scatter at the resonant coupled modes. An approximation is developed to predict the dependence of these modes on wavelength, incident angle and polarization. For …

3-D Scene Reconstruction From Aerial Imagery, Jared M. Ekholm

Theses and Dissertations

3-D scene reconstructions derived from Structure from Motion (SfM) and Multi-View Stereo (MVS) techniques were analyzed to determine the optimal reconnaissance flight characteristics suitable for target reconstruction. In support of this goal, a preliminary study of a simple 3-D geometric object facilitated the analysis of convergence angles and number of camera frames within a controlled environment. Reconstruction accuracy measurements revealed at least 3 camera frames and a 6 convergence angle were required to achieve results reminiscent of the original structure. The central investigative effort sought the applicability of certain airborne reconnaissance flight profiles to reconstructing ground targets. The data sets …

Background-Oriented Schlieren Pattern Optimization, Jeffery E. Hartberger

Theses and Dissertations

This paper describes a test series to investigate background patterns used for the Background-Oriented Schlieren field density measurement technique. Several varying background patterns were substituted under similar fluid density conditions to visualize and isolate the effects of patterns in the background images. A qualitative comparison was completed of the flow visualization results of each background pattern to categorize background conditions that improved the flow visualization image. Changes in background patterns revealed significant changes in flow visualization. Pattern contrast, spacing and sizing all played large parts in the quality of the visual density gradient imaging during the test series.

Modeling Self-Referencing Interferometers With Extended Beacons And Strong Turbulence, Daniel J. Wheeler

Theses and Dissertations

The overall purpose of this research was to better understand the performance of a self-referencing interferometer (SRI) when used with extended beacons in strong atmospheric turbulence. It was performed by assuming the extended beacon could be modeled as a Gaussian Schell-model beam, then analyzing the effect of propagating this beam through strong atmospheric turbulence. Since the operation of an SRI requires coupling this light into a single-mode optical fiber, analytic expressions of the mean and normalized variance of the coupling efficiency were derived. An improved noise model for the SRI was then developed that included all potential noise sources such …

Integrated Approach To Free Space Optical Communications In Strong Turbulence, Jason A. Tellez

Theses and Dissertations

The propagation of a free space optical communication signal through atmospheric turbulence experiences random fluctuations in intensity, including signal fades which negatively impact the communications link performance. This research develops an analytical probability density function (PDF) to model the best case scenario of using multiple independent beams to reduce the intensity fluctuations. The PDF was further developed to account for partially correlated beams, such as would be experienced by beams having finite separation. The PDF was validated with results obtained from digital simulations as well as lab experiments. The research showed that as the number of transmitted beams increases the …

Optical Flow-Based Odometry For Underground Tunnel Exploration, Terra Kier

Theses and Dissertations

As military operations in degraded or GPS-denied environments continue to increase in frequency and importance, there is an increased necessity to be able to determine precision location within these environments. Furthermore, authorities are finding a record number of tunnels along the U.S.-Mexico border; therefore, underground tunnel characterization is becoming a high priority for U.S. Homeland Security as well. This thesis investigates the performance of a new image registration technique based on a two camera optical- flow configuration using phase correlation techniques. These techniques differ from other image based navigation methods but present a viable alternative increasing autonomy and answering the …

Estimating Anthropometric Marker Locations From 3-D Ladar Point Clouds, Matthew J. Maier

Theses and Dissertations

An area of interest for improving the identification portion of the system is in extracting anthropometric markers from a Laser Detection and Ranging (LADAR) point cloud. Analyzing anthropometrics markers is a common means of studying how a human moves and has been shown to provide good results in determining certain demographic information about the subject. This research examines a marker extraction method utilizing principal component analysis (PCA), self-organizing maps (SOM), alpha hulls, and basic anthropometric knowledge. The performance of the extraction algorithm is tested by performing gender classification with the calculated markers.

Simulating The Effects Of An Extended Source On The Shack-Hartmann Wavefront Sensor Through Turbulence, Jeffery S. Dennison

Theses and Dissertations

Perspective elongation in Shack-Hartmann wavefront sensor (SHWFS) spots is a phenomenon caused by an extended three-dimensional scattering beacon in the mesosphere (80-100km). Elongated spots cause errors in wavefront sensor measurements, which leads to poor turbulence compensation and decreased image resolution of the optical system. In order to compensate for elongated spots, a proper beacon model must be developed to simulate the error. In this paper, a documented theory for modeling an elongated sodium beacon and elongated SHWFS spots using sodium layer slices was tested. It was found that nine evenly-spaced slices were adequate to model the elongated beacon in the …

Branch Point Mitigation Of Thermal Blooming Phase Compensation Instability, Mark F. Spencer

Theses and Dissertations

Thermal blooming can have a major impact on high-energy laser (HEL) beam propagation in the atmosphere. In theory, an adaptiveoptics (AO) system can mitigate the nonlinear optical effects induced by thermal blooming; however, when a single deformable mirror is used for phase-only compensation, analysis predicts the possibility of instability. This instability is appropriately termed phase compensation instability (PCI) and arises with the time-dependent development of spatial perturbations found within the HEL beam. These spatial perturbations act as local hot spots that produce negative-lens-like optical effects in the atmosphere. An AO system corrects for the hot spots by applying positive-lens-like phase …

Optical And Electrical Characterization Melt-Grown Bulk Ingaas And Inasp, Jean W. Wei

Theses and Dissertations

A new method to determine semiconductor bandgap energy directly from the easily measured transmission spectra was developed. The method was verified using many binary semiconductors with known properties and utilized to determine the unknown ternary semiconductors were determined at various wavelengths and temperatures. Photoluminescence and Hall-effect measurement were performed to identify various electronic transitions, as well as sample quality. The determination of electrical and optical properties of the material will provide important addition to the database of material properties for future optoelectronic device applications. In the near future, newer materials and their applications need to be developed, and often binary …

Development Of An Interference Lithography Capability Using A Helium Cadmium Ultraviolet Multimode Laser For The Fabrication Of Sub-Micron-Structured Optical Materials, Stanley D. Crozier

Theses and Dissertations

The goal of this work is to develop unique holograms on a semiconductor-metal thin films to characterize as potential metamaterials. This is achievable by developing a fabrication recipe to include exposure methods, exposure dosages, and material development. This study developed an interference lithography capability at AFIT for the first time with period resolution below 230nm. It also identified initial acceptable photoresist materials and exposure dosages, and a path to follow to optimize this process. The potential impact of this is to make IL a standard in optical meta-material fabrication, which decreases manufacturing time and allows for less error in production. …

Shack-Hartmann And Interferometric Hybrid Wavefront Sensor, Troy R. Ellis

Theses and Dissertations

This document reports results of wave-optics simulations used to test the performance of a hybrid wavefront sensor designed to combine the self-referencing interferometer and Shack-Hartmann wavefront sensors in an optimal way. Optimal hybrid-wavefront sensor design required a thorough analysis of the noise characteristics of each wavefront sensor to produce noise models that assist in the design of an optimal phase-estimation algorithm. Feasible architectures and algorithms for combining wavefront sensors were chosen, and the noise models of the individual wavefront sensors were combined to form a model for the noise-induced error of the resulting hybrid sensor. The hybrid wavefront sensor and …