Optics Commons^™

Investigation Of The Production Technology Of Environmentally Safe Urethane Oligomers Based On Local Raw Materials, Bakhtiyor Kudratovich Shaykulov, Dilafruza Ruziboevna Akbarova Gulboeva, Fayzulla Nurmuminovich Nurqulov

Technical science and innovation

This paper investigates the step-by-step poly condensation pathway for synthesizing environmentally friendly, non-isocyanate urethane oligomers derived from local and safe raw materials: urea and ethylene glycol. The influence of thermodynamic parameters on the target product yield was systematically evaluated to determine the optimum technological matrix. Specifically, a 1:2 reactant mass ratio, a stable stationary temperature of 150-155 °C, and a reaction duration of 2 hours under an inert nitrogen atmosphere resulted in a sustainable and reproducible yield of 72%. Thermal degradation and competitive side-product condensations were activated above 160 °C, leading to a sharp drop in overall chemical efficiency. The …

M.O.D.U.S. Modular Optical Design Using Specular Film, Mario Gutierrez, Robert Thibodeau, Emma Show, Desiree Robinson, Lingyuan Meng, Sean Martin, Conner Beeson

Discovery Day - Daytona Beach

High-quality parabolic mirrors, which are vital components in reflecting telescopes, are typically bulky, costly, and highly fragile. This experiment explores the feasibility of using specular Class B Mylar as an unconventional, lightweight, and cost-effective alternative. This approach could enable new telescope designs by greatly reducing weight and manufacturing expenses, while also opening options for potential adaptability.   This approach involves using Mylar, a flexible, reflective style of plastic. The mylar is formed into a concave mirror by stretching a sheet over a chamber and depressurizing one side to force the sheet into the necessary curved shape. Multiple designs are being created …

Visualizing The Invisible: Simulating Electromagnetic Field In 3d Space With Matlab, Aashman Gupta, Eliane Dean, Riley Esperanca, Hailey Grabinski, Jacob Summerhays, Ameya Sute

Discovery Day - Daytona Beach

Electromagnetic field behaviours in free space are defined by Maxwell’s Equations, which couple the temporal and spatial variations of electric and magnetic fields through partial derivatives. These derivatives quantify the rate of change of each field’s vector component with respect to position and time in a 3D lattice, forming the basis for numerical field analysis. This research will develop a mathematical and computational framework using multivariable calculus to model, simulate, and visualize electromagnetic wave propagation in free space using MATLAB. Gradient, divergence, and curl operations are implemented to compute local field variations and energy transfer. The resulting data are used …

Single Fluorogens And Orientation-Localization Microscopy For Quantifying Chemical And Biomolecular Dynamics At The Nanoscale, Yiyang Chen, Yuanxin Qiu, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Many chemical systems look uniform only because ensemble measurements average over their most interesting molecules. Electron-transfer rates vary across electrode surfaces; lipid membranes contain nanodomains with distinct packing and fluidity; peptide aggregates exhibit local polymorphism; and biomolecular condensates contain transient networks of interactions that are blurred in ensemble images. A central challenge in chemical imaging is not simply to see smaller structures, but to measure chemical variables such as polarity, redox potential, and molecular confinement at the single-molecule level. In this Account, we describe how fluorogens, molecules whose brightness, blinking, spectral shifts, orientation, rotational mobility, and motion are directly shaped …

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

Macroscopic Classical And Quantum Models Of Inverse Compton Scattering, Emerson Penn Rogers

Physics Theses & Dissertations

Inverse Compton sources — in which a relativistic electron beam scatters a laser pulse to produce tunable, collimated, high-energy radiation—have emerged as among the most promising compact radiation sources, with applications ranging from nuclear photonics to medical and nanoscale imaging and metrology. The most viable current tabletop configuration couples laser-wakefield acceleration with inverse Compton scattering, producing GeV-scale electron beams over millimeter distances. As laser intensities increase and electron energies grow, the interaction enters the radiation reaction regime, where the energy radiated by the electron becomes a significant fraction of its kinetic energy. Predicting the scattered electron energy spectrum — the …

Non-Traditional Rare-Earth-Doped Oxide Glass As A Gain Medium, Jared S. Tolliver

Optical Science and Engineering ETDs

There is a need for mid-infrared(MIR) lasers in defense, medical, and environmental monitoring. A large part of this technological development is the study of gain media. One class of materials of special interest is glasses with a low maximum phonon energy. These have the fiberization and broad spectral features of glass, whereas glasses with high maximum phonon energy exhibit higher rates of multi-phonon relaxation and can be opaque in the MIR, both of which are detrimental to laser operation. Recent advances in container-less processing have allowed for the study of new glasses that aren’t possible with conventional fabrication techniques. One …

Algorithmic Sculpting Of Complex Fused Silica Surfaces For Nondestructive, Mode-Matched Cavity Quantum Electrodynamics: Adaptive Co2 Milling And Simulation-Guided Ultrafast Inscription, From Fiber Fabry-Perot Cavities To Monolithic Architectures, Meagan E. Parker

Optical Science and Engineering ETDs

Quantum sensors achieve exceptional measurement sensitivity through coherent, well-isolated quantum systems, but practical deployment is hindered by destructive readouts that require repeated state preparation and create long system dead times. Optical cavities enable continuous, nondestructive measurements with minimal back-action, yet integrating high-finesse cavities into scalable quantum devices remains limited by existing fabrication methods. To overcome these constraints, an adaptive CO₂ laser-milling platform was developed. Guided by glass thermodynamics and melt dynamics, this closed-loop system uses in-situ phase-shifting interferometry to sculpt complex fused-silica surfaces with sub-nanometer root-mean-square roughness. The platform was validated by fabricating extended-length fiber Fabry–Pérot cavities and monolithic micro-cavity …

Boiling Flow Estimation For Aero-Optic Phase Screen Generation, Jeffrey W. Utley, Gregery T. Buzzard, Charles A. Bouman, Matthew R. Kemnetz

Faculty Publications

Aero-optic effects due to turbulence can reduce the effectiveness of transmitting light waves to a distant target. Methods to compensate for turbulence typically rely on realistic turbulence data, which can be generated by i) experiment, ii) high-fidelity computational fluid dynamics (CFD), iii) low-fidelity CFD, and iv) autoregressive methods. However, each of these methods has significant drawbacks, including monetary and/or computational expense, limited quantity, inaccurate statistics, and overall complexity. By contrast, the boiling flow algorithm is a simple, computationally efficient model that can generate atmospheric phase screen data with only a handful of parameters. However, boiling flow has not been widely …

Rapid-Prototyping Nanofabrication: Lcd-Based Projection Lithography And Physical Vapor Deposition, Sabeel Saleem Mohammmed

University Honors Theses

The semiconductor industry's continued growth, driven in large part by demand for artificial intelligence hardware, has highlighted the need for greater workforce development in regions adjacent to major fabrication centers like Oregon's Silicon Forest. This capstone project lays the groundwork for a small scale and student led semiconductor fabrication lab at Portland State University by demonstrating two of the core steps in chip manufacturing: photolithography and thin film deposition. Rather than relying on conventional fixed reticles, this work explores a unique, low cost approach to patterning that uses an ultraviolet-compatible liquid crystal display (LCD) as a programmable reticle, allowing arbitrary …

Matching Two Long Interferometric Pathlengths Using Low Temporal Coherence Light For Finding Hong–Ou–Mandel Dip, Keith A. Wyman, Noah S. Everett, Anil K. Patnaik

Faculty Publications

Hong–Ou–Mandel (HOM) dip from a biphoton source in a two-photon interferometer provides a myriad of quantum tools for quantum communication and sensing. But the stringent requirements for spatial coherence between the photon pair makes it prohibitively difficult to observe high-fidelity HOM dip in long-distance free-space implementations, e.g., for the photon pairs involved in quantum communication need to match the two path lengths within a few 10 s of micron because of the short coherence width of the two-photon wave-packet. While many techniques for the pathlength balancing of two interferometric arms have been studied and applied extensively, such balancing is further …

Winddensity-Mbir: Model-Based Iterative Reconstruction For Wind Tunnel 3d Density Estimation, Karl J. Weisenburger, Gregery T. Buzzard, Charles A. Bouman, Matthew R. Kemnetz

Faculty Publications

Experimentalists often use wind tunnels to study aerodynamic turbulence, but most wind tunnel imaging techniques are limited in their ability to take non-invasive three-dimensional (3D) density measurements of turbulence. Wavefront tomography is a technique that uses multiple wavefront measurements from various viewing angles to non-invasively measure the 3D density field of a turbulent medium. Existing methods make strong assumptions, such as a spline basis representation, to address the ill-conditioned nature of this problem. We formulate this problem as a Bayesian, sparse-view tomographic reconstruction problem and develop a model-based iterative reconstruction algorithm for measuring the volumetric 3D density field inside a …

Improving The Reliability And Performance Of A Supersonic Indraft Tube Wind Tunnel, Christian J. Kaml

Master's Theses

Access to supersonic testing is increasing in demand, and wind tunnels remain one of the safest and most cost-effective methods for gathering high-speed flow data. Despite being more economical than alternative options, supersonic wind tunnel facilities often require substantial investment to construct, operate, and maintain.

The novel indraft tube tunnel architecture was conceived as a high-speed flow testbed that incorporates features of both Ludwieg tubes and indraft wind tunnels to maintain costs low enough to be accessible even to small universities. This design was first developed and tested in 2018 at California Polytechnic State University, featuring a cost per test …

Polarimetric Terahertz Imaging For The Measurement Of Birefringence In Plastic, Rachel Cohen

Theses

Birefringence offers a promising way to observe stress concentration in materials such as glass and plastic, and thereby to identify weaknesses. Polarimetric imaging can be used to measure the birefringence of material, so long as the material is transparent to the light being used for the imaging. In this research, 2D Terahertz imaging was investigated as a means of measuring the birefringence of plastics that are opaque to visible light but transparent to THz radiation, for the eventual purpose of analyzing the residual stress present. In order to do so, two separate terahertz cameras were characterized for potential use in …

Characterizing Stiffness Dynamics Of Normal And Malignant Breast Spheroids Using Brillouin Microscopy, Razanne Rafat Zaghloul, Karlin Hilai, Chenjun Shi, Jitao Zhang

Medical Student Research Symposium

Background: Breast cancer progression and metastasis are closely linked to alterations in the mechanical properties of tumor cells and their microenvironment. Softer, more deformable cells are often associated with higher metastatic potential. While atomic force microscopy (AFM) is the current gold standard for mechanical characterization, it is limited to surface measurements and can damage 3D cultures. It remains unclear how the mechanical properties evolve over time in normal versus malignant spheroids. This study utilizes Brillouin light-scattering microscopy, a non-contact and label-free optical technique, to assess stiffness changes in normal and malignant breast epithelial spheroids over time. Understanding these mechanical signatures …

Design And Simulation Of Anti-Resonant Hollow-Core Fiber For Sensing Applications, Pravallika Kante

Theses and Dissertations

This thesis presents the design and simulation of an 8-tube single-ring anti-resonant hollow-core fiber for sensing applications, with particular emphasis on methane gas detection at the fundamental absorption wavelength of 3.3 µm. Conventional solid-core silica optical fibers exhibit strong multi-phonon material absorption beyond 2.5 µm, rendering them fundamentally unsuitable for efficient light guidance and direct gas sensing at mid-infrared wavelengths. Anti-resonant hollow-core fibers overcome this limitation by guiding light predominantly through an air-filled hollow core via the anti-resonant reflecting optical waveguide mechanism, in which the thin silica glass walls of the cladding tubes act as Fabry-Pérot etalons that confine the …

Characterizing Atmospheric Turbulence With The Lunar Step Response Method, Patrick D. Carattini, Caleb J. Stilp, Katelyn M. Atkinson, Stephen C. Cain

Faculty Publications

Most methods that astronomers use to characterize the strength of atmospheric turbulence in and around their observatories use differential image motion monitors observing a star to provide the necessary data for the measurement. With the Moon becoming a greater national priority, the need to characterize atmospheric paths between observatories on Earth and the Moon is potentially going to grow in the future. To this end, the differential image motion monitor is not an ideal instrument for characterizing turbulence along paths between observatories and the Moon as the bright Moon makes it difficult to detect and locate stars in its vicinity. …

Dual-Function Plasmonic Structure For Logic Operations And Circular Polarization Detection, Marjan Bazian, Mark C. Harrison

Engineering Faculty Articles and Research

Many integrated photonic devices have a high potential for dual applications, making them more versatile components in photonic integrated circuits. In this study, we show that a plasmonic XOR gate structure, originally designed to perform logic operations, can also be used as a circular polarization detector. This multi-purpose capability stems from the phase-encoded input mechanism that controls the output response of the structure. We adapted this mechanism to select the output based on the polarization state of light. The design of this structure, utilizing the subwavelength field confinement of plasmonic waveguides, enables the integration of logic and detection functions into …

Sensing Negative-Cone Rotational Diffusion Of Dipole-Like Emitters, Yuanxin Qiu, Kaizhi A. Nie, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Fluorescence anisotropy and single-molecule orientation-localization microscopy (SMOLM) are powerful techniques that quantify the rotational diffusion of dipole-like emitters, which is important for sensing molecular interactions and chemical environments at the nanoscale. Numerous theoretical and experimental studies have thoroughly characterized single-molecule rotations even when those rotations are much faster than the detector integration time. Here, we extend the theory of measuring rotational diffusion to situations where a single dipole rotates uniformly everywhere outside of an isotropic cone of a certain size, termed a negative cone. This scenario corresponds to negative fluorescence anisotropy 𝑟 and has been observed in emitters exhibiting strong …

Computational Modeling Of Enhanced Nonlinear Optical Response In Plasmonic Waveguide Devices With Epsilon-Near-Zero Films, Kevin T. Le, Mark C. Harrison

Engineering Faculty Articles and Research

Silicon photonics faces fundamental limitations in nonlinear applications due to weak Kerr nonlinearity, substantial two-photon absorption, and coupling challenges with subwavelength structures. This work investigates epsilon-near-zero (ENZ) materials integrated into plasmonic waveguide architectures for enhanced nonlinear photonic devices. ENZ materials exhibit nonlinear refractive indices several orders of magnitude higher than conventional materials near their zero-permittivity wavelength, enabling giant optical effects over deeply sub-wavelength interaction lengths. We present finite element method simulations of plasmonic ENZ waveguides, investigating layer thickness optimization for nonlinear enhancement while minimizing optical losses. Initial modal analysis confirms superior field confinement in hybrid plasmonic-ENZ structures compared to conventional …

Proposed Methodology For Correcting Fourier-Transform Infrared Spectroscopy Field-Of-View Scene-Change Artifacts, Kody A. Wilson, Michael L. Dexter, Benjamin F. Akers, Anthony L. Franz

Faculty Publications

Fourier-transform spectrometers are widely used for spectral measurements. Changes in the field of view during measurement introduce oscillations into the measured spectra known as scene-change artifacts. Field-of-view changes also introduce uncertainty about which target the measured spectrum represents. Though scene-change artifacts are often present in dynamic data, their significance is disputed in the current literature. This work presents a theoretical framework and experimental validation for scene-change artifacts. Field-of-view changes introduce variable interferogram offsets, which standard processing techniques assume are constant. The error between the interferogram offset and its estimate is Fourier-transformed, yielding scene-change artifacts, often confused with noise, in the …

Connecting The Existing Fiber Infrastructure To The Future With Antiresonant Hollow Core Fibers, Timothy Bate

Graduate Studies Theses and Dissertations 2026

Optical fiber systems based on solid-core silica waveguides underpin modern telecommunications, high-power laser delivery, precision sensing, and coherent optical systems. However, nonlinear effects, material absorption, and thermal limitations within silica increasingly constrain further scaling in both optical power and transmission performance. Antiresonant hollow-core fibers provide a promising alternative by guiding light predominantly in air, substantially reducing nonlinear interactions, latency, and optical damage while enabling transmission regimes inaccessible to conventional solid-core fibers. Despite rapid advances in antiresonant hollow-core fiber attenuation and power handling, one of the largest remaining barriers to widespread adoption is reliable integration with the existing solid-core fiber ecosystem. …

Design, Fabrication Modeling, And Optical Metrology Of Mwir Silicon Metalenses, Weiyu Chen

Graduate Studies Theses and Dissertations 2026

Mid-wave infrared (MWIR) optical systems require compact, broadband, manufacturable components whose performance can be predicted and measured reliably. Silicon metalenses are attractive because silicon combines high refractive index, MWIR transparency, and semiconductor-compatible fabrication. This dissertation develops a scale-bridging design–fabrication-modeling–metrology framework for MWIR silicon metalenses.

A shared full-aperture framework connects meta-atom libraries, physical layout generation, angular-spectrum propagation, point-spread-function calculation, and focal-plane energy metrics. Building on this foundation, the Dispersive Sweatt Model (DSM) incorporates meta-atom dispersion into conventional ray-tracing software, enabling broadband co-optimization of metasurfaces and refractive elements. A process-aware design framework then incorporates scanning electron microscopy (SEM)-measured height–radius relationships produced by …

Integrated Optical Probes For Confocal Scanning Imaging And Adjustable Coherent-Gated Dynamic Sensing, Yonglin Huang

Graduate Studies Theses and Dissertations 2026

Optics and photonics have been one of the most important sciences and technologies that impact modern human life in a big way. For example, fiber-optics for communications and artificial intelligence. Optical probes are critical components for optical imaging and optical sensing technologies that have been actively researched and developed in the past decades. Advanced fiber-optic sensor probes with smaller size, better performance, lower noise, higher photon efficiency, rapid sensing time, and lower cost are needed in many applications, such as nanoscale material science, chemistry, and biomedical fields, etc.  In this project, new fiber-optic sensor probe technologies and integrated micro-optic devices …

Volumetric Fluorescence Microscopy For High-Throughput And High-Sensitivity Imaging: From Single Molecules To Tissues, Le-Mei Wang

Graduate Studies Theses and Dissertations 2026

Fluorescence microscopy is an indispensable tool in the biological sciences, enabling researchers to investigate intricate subcellular structures, particularly for volumetric studies. However, conventional optical microscopy for volumetric imaging remains fundamentally constrained by imaging speed and throughput. To bypass traditional serial z-scanning, we introduce an axially scan-free method using a phase layer cake to modulate the system's point spread function. This approach projects volumetric information onto a 2D plane in a single shot, offering high flexibility in tuning axial depth alongside simultaneous multicolor imaging with high spatial resolution and sensitivity. This dissertation divides these technical advancements into cellular and tissue imaging …

Detection And Discrimination Of Targets In Infrared Imagery, Adam T. Cuellar

Graduate Studies Theses and Dissertations 2026

Automated infrared (IR) imagery analysis is essential for persistent surveillance, defense, and security, yet it remains difficult when sensors move and when unknown objects appear. This dissertation addresses two fundamental problems: (1) detecting small moving targets amid platform-motion induced parallax and (2) distinguishing between known stationary targets and out-of-distribution (OOD) objects.   For detecting moving targets while the platform itself is in motion, auxiliary Global Positioning System and Inertial Navigation System data are combined with image analysis. Direction Cosine Matrices from calibrated inertial measurements enable sub-pixel frame alignment unattainable with purely image-based registration. The stabilized sequence is processed by a Reed–Xiaoli …

High-Efficiency And Compact Virtual Reality Displays, Zhenyi Luo

Graduate Studies Theses and Dissertations 2026

Virtual reality (VR) and augmented reality (AR) technologies are revolutionizing the way humans interact with digital information. However, current near-eye display systems still face critical challenges regarding optical efficiency, image quality, and device weight. This dissertation focuses on addressing these limitations through innovative liquid-crystal (LC) optics and system-level design strategies to achieve high-efficiency and compact VR displays.

First, to solve the longstanding problem of severe chromatic aberrations in ultrathin LC optics, I proposed an achromatic diffractive LC device. By stacking three LC layers with specifically designed spectral responses and polarization selectivity, I successfully reduced the chromatic aberrations. This idea enables …

High Intensity Ablation By Laser Filaments At Standoff Distances, Owen Thome

Graduate Studies Theses and Dissertations 2026

The high-power densities delivered to a target material by a laser allow for melting and vaporization to occur, a process called laser ablation. At higher intensities, plasma formation occurs and more complex material removal mechanisms take place. As laser power increases, nonlinear effects occur during propagation. One such effect, Kerr self-focusing, leads to beam collapse and ionization, resulting in a channel of plasma and region of high intensity light referred to as a laser filament. Filaments carry intensities on the order of 10¹³ W/cm² to significant distances without the use of large-scale focusing optics. Laser filament ablation is …

Impact Of Ethanol On The Evolution Of One-Step Synthesized Gold Nanoplates And Nanostars And Their Effects On Raman Signal Enhancement, Ananda Fania, Nonni Soraya Sambudi, Kirana Yuniati Putri, Yuliati Herbani, Affi Nur Hidayah

Makara Journal of Science

Gold nanoplates and nanostars were synthesized from a gold metal salt solution (HAuCl₄) using a one-step synthesis method of ultraviolet C (UVC) light irradiation. The gold salt solution was mixed with ethanol in 6 mL with the following ratios: (1.5:4.5, 3:3, and 4.5:1.5), and subsequently irradiated with UVC light. Changes in localized surface plasmon resonance (LSPR) shifts were observed in real time at 30-min intervals for 2 h. The synthesis process produces gold nanoplates. While gold nanostars were synthesized from a solution of gold salt combined with ethanol, ascorbic acid, and AgNO₃, maintaining a consistent ratio …

Investigation Of Laser Based Flow Diagnostics With Metastable Argon, Sterling S. Gordon

Physics Theses & Dissertations

The overarching motivation of this work is the development of seedless, non-intrusive, laser-based diagnostics for supersonic airflow in wind tunnels. To advance this goal, this dissertation fo-cuses on three-photon excitation in a research-grade argon beam within a tabletop vacuum system, which offers a controlled environment for testing and refining the approach. The chosen excitation scheme drives argon atoms to the 3d[5/2]₃ state using a pulsed Ti:Sapphire laser system, enabling time-of-flight (ToF) measurements on atoms that subsequently undergo a multi-step decay to the metastable 4s[3/2]₂ state. Although full realization of this excitation scheme was hindered by technical …