Physics Commons^™

Improvements In Wavelength Modulation Spectroscopy Using Ratios Of Higher Harmonics, James Michael Barrington

Electrical & Computer Engineering Theses & Dissertations

Experiments in Wavelength Modulation Spectroscopy have been conducted at Old Dominion University since 1996. The method provides a highly sensitive, nonintrusive method of probing gases. Research has concentrated on effectively modeling the higher harmonic shapes that are measured experimentally. Accurately modeling these signals will result in the ability to reliably extract the information contained in transition line shapes.

In order to accurately depict the signals, the theory must be thoroughly understood. This thesis develops the theory of Wavelength Modulation Spectroscopy from two aspects: a direct Fourier series expansion of a time varying intensity profile and through communication theory. In addition, …

Third Quarter Report, Covering January Through March 2002, John Farley

Transmutation Sciences Materials (TRP)

Progress from June 2001-November 2001 was presented at the winter meeting of the American Nuclear Society in Reno (November 12-15, 2001), and incorporated into a refereed conference proceeding. A copy of the refereed conference proceeding has been provided to Tony Hechanova. In brief, the paper described the new program to examine the corrosive effects of lead-bismuth eutectic (LBE) on steels. We employed various types of surface studies (Scanning Electron Microscope [SEM], and X-ray Photoelectron Spectrometry [XPS]) to examine steel samples that had been exposed to LBE for various lengths of time at various temperatures. The goal is to understand the …

Smart Structures For Control Of Optical Surfaces, D. Michael Sobers Jr.

Theses and Dissertations

The development of lightweight, large-aperture optics is of vital importance to the Department of Defense and the US Air Force for advancing remote sensing applications and improving current capabilities. Synthetic polymer optics offer weight and flexibility advantages over current generation glass mirrors, but require active control to maintain tight surface figure tolerances. This research explores the feasibility of using imbedded piezoelectric materials to control optical surfaces. Membrane-based and stiff piezo-controlled mirrors were constructed to develop and validate control techniques. Test results verified that surface control on the order of tens of wavelengths is possible using these systems.

Design And Analysis For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides: Quarterly Progress Report 11/16/01- 2/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

An important aspect of the Advanced Accelerator Applications (AAA) program is the development of a casting process by which volatile actinide element (i.e., americium) can be incorporated into metallic alloy fuel pins. The traditional metal fuel casting process uses an inductively heated crucible.

This process works well for the fabrication of metal fuel pins traditionally composed of alloys of uranium and plutonium, but does not work well when highly volatile actinides are included in the melt. The problem occurs both during the extended time period required to superheat the alloy melt as well as when the chamber must be evacuated. …

Effect Of Ga Content On Defect States In Cuin1-XGaXSe2 Photovoltaic Devices, Jennifer T. Heath, J. David Cohen, William N. Shafarman, Dongxiang Liao, Angus Rockett

Faculty Publications

Defects in the band gap of CuIn_1-xGa_xSe₂ have been characterized using transient photocapacitance spectroscopy. The measured spectra clearly show response from a band of defects centered around 0.8 eV from the valence band edge as well as an exponential distribution of band tail states. Despite Ga contents ranging from Ga/(In+Ga)=0.0 to 0.8, the defect bandwidth and its position relative to the valence band remain constant. This defect band may act as an important recombination center, contributing to the decrease in device efficiency with increasing Ga content.

Effect Of Oxygen Vacancies On The Magnetic Structure Of The La₀.₆Sr₀.₄Feo3-Δ Perovskite: A Neutron Diffraction Study, Zili Chu, William B. Yelon, Jinbo Yang, William Joseph James, Harlan U. Anderson, Yixiang Xie, Satish K. Malik

Physics Faculty Research & Creative Works

Magnetic interactions in perovskite compounds of the type La_1-xSr_xMO_3-δ (M=3d transition such as Mn and Fe) are presumed to arise through a super exchange between 3d electrons of the magnetic ions via oxygen orbitals. The magnetic structure of La_0.6Sr_0.4FeO_3-δ has been studied with neutron diffraction. Oxygen vacancies were created by annealing samples under various gases including N₂, air and mixtures of CO/CO₂. All La_0.6Sr_0.4FeO_3-δ compounds maintain the rhombohedral structure (space group R3̄c). The air- or oxygen-annealed samples have almost no oxygen …

Thermoelectric Properties Of Bi2sr2co2o9 Whiskers Under Hydrostatic Pressure, F Chen, Kevin L. Stokes, Ryozi Funahashi

Physics Faculty Publications

We report the temperature dependence of thermopower (S) in the ab plane of Bi2Sr2Co2O9 {BC-222} single crystalline whiskers under high pressure up to 1.2 GPa. Special modifications were made to our high-pressure transport measurement system to improve the measurement accuracy of S for whiskers with high resistance. Pressure improved the contact resistance dramatically. We observed a slight decrease of  S and four-wire electrical conductivity (sigma) under high pressure. As a result, the power factor (S2sigma) was decreased less than 20% by pressure. From the temperature dependence of sigma, the band gap of BC-222 whiskers increase very slightly …

High-Efficiency Solar Cells Based On Cu(Inal)Se[Sub 2] Thin Films, S. Marsillac, P. D. Paulson, M. W. Haimbodi, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

A Cu(InAl)Se₂solar cell with 16.9% efficiency is demonstrated using a Cu(InAl)Se₂thin film deposited by four-source elemental evaporation and a device structure of glass/Mo/Cu(InAl)Se₂/CdS/ZnO/indium tin oxide/(Ni/Algrid)/MgF₂. A key to high efficiency is improved adhesion between the Cu(InAl)Se₂ and the Mo back contact layer, provided by a 5-nm-thick Ga interlayer, which enabled the Cu(InAl)Se₂ to be deposited at a 530 °C substrate temperature. Film and device properties are compared to Cu(InGa)Se₂ with the same band gap of 1.16 eV. The solar cells have similar behavior, with performance limited by recombination through …

Atomic Hydrogen Cleaning Of Inp(100): Electron Yield And Surface Morphology Of Negative Electron Affinity Activated Surfaces, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Atomic hydrogen cleaning of the InP(100) surface has been investigated using quantitative reflection high-energy electron diffraction. The quantum efficiency of the surface when activated to negative electron affinity was correlated with surface morphology. The electron diffraction patterns showed that hydrogen cleaning is effective in removing surface contaminants, leaving a clean, ordered, and (2×4)-reconstructed surface. After activation to negative electron affinity, a quantum efficiency of ∼6% was produced in response to photoactivation at 632 nm. Secondary electron emission from the hydrogen-cleaned InP(100)-(2×4) surface was measured and correlated to the quantum efficiency. The morphology of the vicinal InP(100) surface was investigated using …

Effect Of Cr3+ And So42- On The Structure Of Rust Layer Formed On Steels By Atmospheric Corrosion, Masato Yamashita, Hitoshi Uchida,, Desmond C. Cook .

Physics Faculty Publications

The effect of chromium ion (Cr³⁺) and sulfate ion (SO₄^2-) on the structure of the rust layer formed by thin electrolyte-film corrosion of low-alloy steels has been examined. By using X-ray diffraction spectroscopy, it was found that coexistence of Cr³⁺ and SO₄^2- in the electrolyte film covering the steel surface quickly forms the Cr-goethite (α-(Fe _1-X, Cr_X)OOH) layer which has been known as the final protective rust layer. Scanning vibrating electrode measurements showed that the rust layer formed under the electrolyte film containing Cr³⁺ and SO₄^{2- …}

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

This research program will analyze various steel samples that have been exposed to LBE as part of the national program to develop LBE and transmutation technologies. This information will be paramount in developing engineering efforts to control, avoid, and/or minimize the effect of corrosion of steels by LBE in transmuter and LBE systems. Additionally, this program provides UNLV researchers with hands-on experience that will be crucial in developing the UNLV LBE program, supporting the University’s mission with the ISTC target complex, and the future development of additional facilities to examine LBE systems.

The research group plans to test the hypothesis …

Corrosion Of Steel By Lead Bismuth Eutectic: Year 1 Annual Report, John Farley

Transmutation Sciences Materials (TRP)

The goal is to investigate the corrosion of stainless steel by lead-bismuth eutectic (LBE), which has been proposed for use as a blanket coolant and a spallation target in the transmuter.

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

We examined stainless samples that were exposed to LBE in experiments conducted by the Russians, under contract to Los Alamos. We examined both corroded and uncorroded samples using the Scanning Electron Microscope (SEM), the Energy Dispersive X-Ray (EDAX) Spectroscopy, and the X-ray Photoelectron Spectrometer (XPS). We found that the surface of the corroded sample is covered by oxygen-containing compounds, presumably mostly iron oxide. In samples exposed for shorter times or lower temperatures, we found that some areas were covered by an oxide layer, and some areas was uncovered. We found that the level of Cr in the uncovered area is …

Capillary Flow In Interior Corners: The Infinite Column, Mark M. Weislogel

Mechanical and Materials Engineering Faculty Publications and Presentations

Capillary flow of a sinusoidally perturbed liquid column in an interior corner of infinite extent is solved using lubrication theory. Due primarily to the length scales selected to nondimensionalize the momentum equation, an analytic time scale governing the settling of the perturbation is determined. The time scale, which is shown to be independent of a steady base state flow, proves useful in rapidly predicting transients for surface settling in certain liquid-bearing tanks of spacecraft employing interior corners for fluids management purposes. The asymptotic analysis is extended to address flows along interior corners whose faces are slightly nonplanar. The generalized formulation …

Analysis Of Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal is to achieve a basic understanding of the corrosion of stainless steel by Lead Bismuth Eutectic (LBE), which has been proposed for use in the transmuter as both a coolant and as a sputtering target.

43rd Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 43rd annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-sponsored by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, July 29 - August 2, 2001.

Single-Sided Noninvasive Inspection Of Multielement Sample Using Fan-Beam Multiplexed Compton Scatter Tomography, Matthew A. Lange

Theses and Dissertations

As aircraft age, corrosion forms upon unobservable surfaces, particularly at the junction of the sheet aluminum and the steel rivets used to attach the sheets to the airframe, degrading the aircraft s airworthiness. Previous research developed a noninvasive technique for the evaluation of the material composition of aluminum surfaces, utilizing the information encoded in the energy spectra of Compton-scattered gamma emissions. The spectra are gathered by a six-element, high purity germanium detector array. A, first principles, deterministic computer code is used to reconstruct a two-dimensional map of the electron density of aluminum samples. Previous efforts, to image pure aluminum samples, …

Time-Resolved Photoluminescence Of Inas/Gainsb Quantum Well Lasers, Michael R. Mckay

Theses and Dissertations

In the world of semiconductor photonic device fabrication, one important objective may be to extract as much light as possible from the device. In these devices, photons are created when electrons recombine with holes by transitioning from a high-energy state to a lower one. Unfortunately, electron-hole recombination does not always result in the formation of a photon. There are three basic types of recombination: the first results in the formation of a photon and is called radiative recombination; and the second and third, known as Shockley-Read-Hall and Auger recombination, result in the heating of the device and do not produce …

Photoluminescence Of Single Quantum Well Structures In Gallium Arsenide, Christian A. Bartholomew

Theses and Dissertations

The continued development of state-of the-art semiconductor technologies and devices by the United States Air Force and the Department of Defense requires accurate and efficient techniques to evaluate and model these new materials. Of particular interest to the Air Force are quantum well structures which can be used for small-scale laser sources in fly-by-light applications, as efficient infrared countermeasures to heat-seeking missiles, or as advanced seekers in optically guided missiles. This thesis provides the initial experimental procedures and data necessary to begin producing accurate yet robust models. Although carrier effective masses could not be evaluated using hot-electron photoluminescence, photoluminescence excitation …

Numerical Study Of Optical Delay In Semiconductor Multilayer Distributed Bragg Reflector And Tunable Microcavity Structures, Michael I. K. Etan

Theses and Dissertations

The Air Force has a growing need for the greater bandwidth, speed, and flexibility offered by optical communication links. Future space systems and airborne platforms will most likely use optical signals for efficient power transmission and to minimize the possibility of spoofing and eavesdropping. Tunable optical delays play an important role in the implementation of free space optical communication links. The primary challenge in implementing these systems is the active maintenance of coherent wave fronts across the system's optical aperture. For space applications, this aperture may he hundreds of meters in diameter. Spatial segmentation of a large aperture into smaller …

Sulphide Based Materials As Potential Anodes In Lithium Ion Cells, Azlin Sanusi

Student Works (2000-2009)

Sulphides based compounds PbS and SnS have been studied as possible anode material in lithium ion cell. PbS was prepared by the chemical bath deposition technique and SnS by the double decomposition method. Both samples were characterized by the powder X-ray diffraction technique and energy dispersive analysis of X-rays (EDAX). The room temperature electrical conductivity of PbS is 2.6 x 10⁻⁴ S cm⁻¹ and SnS is 5.3 x 10⁻⁷ S cm⁻¹ while at 90°C the electrical conductivity of PbS is 3.3 x 10⁻⁴ S cm⁻¹ and SnS is 2.90 x 10⁻⁶ S cm⁻¹ Cyclic voltammetry determined the potential anode ability …

Synthesis And Characterization Of Lithiated Mixed Metal Oxides For Lithium Ion Rechargeable Batteries, Seng Gee Tan

Student Works (2000-2009)

Lilhiated mixed metal oxides for lithium ion rechargeable batteries were prepared by the sol gel technique. Samples consisting of lithium acetate, nickel nitrate, cobalt nitrate, manganese acetate and aluminium fluoride were characterised using X-ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIRS). Energy Dispersive Analysis of X-rays (EDAX) w1d Cyclic Voltammetry (CV). Thermal characterization shows that the acetates, nitrates and fluorides of precursors material deform at temperature between 50° to 100°C and the products begin to form at a temperature between 264°C to 271°C. FTIR studies show that the materials must be heated for a longer time …

Evidence Of Nanostructure In Multilayer Cdse Thin Films, Suganthi Devadason

Student Works (2000-2009)

Cadmium Selenide multilayer thin films have been prepared using physical vapour deposition method. Alternate layers of Cadmium and Selenium are deposited on unheated glass substrates. Morphological study of the samples has been done using SEM micrographs with a magnification of 5000. The EDX analysis gives the quantitative atomic percentage content of elements present in the samples. It is found that the high Cadmium content in the samples increased the crystallinity. From XRD measurements, it is evident that many films are polycrystalline in nature with a peak corresponding to < 111 > plane orientation of the zinc blende structure. The lattice constant of the …

Effects Of Argon Dilution Of Silane On The Optical Properties And Surface Morphology Of Hydrogenated Amorphous Silicon, Choon Kheam Lim

Student Works (2000-2009)

Hydrogenated amorphous silicon (a.Si:H) was prepared using the d.c plasma grow discharge system. Two sets of samples were prepared and studied. The first set of samples referred to as the high argon dilution films were prepared from the discharge of pure silane at flow-rate of 5sccm and silane at the same flow-rate diluted in argon at flow-rates of 5, 10 and 15sccm. Similarly, the second set of sample referred to as the low argon dilution films were prepared from the discharge of pure silane at flow-rate of20sccm and silane at the same flow-rate diluted in argon at the flow-rates mentioned …

Infared Spectroscopy And Electrical Conductivity Of Copper(Ii) Cinnamate And Iodine-Doped Copper(Ii) Cinnamate, Kumar Krishnan

Student Works (2000-2009)

Copper(II) cinnamate (CC) was prepared from copper(II) acetate monohydrate and cinnamic acid. It was a light-blue powder. The Fourier Transform Infrared (FTIR) spectrum of CC, recorded as potasium bromide (K.Br) disc, indicated the presence of all bonds and functional groups expected of it and showed that it exist as an equal mixture of cis- and trans- isomers. The conductivity of CC at room temperature was 5.22 x 10⁻¹¹Scm⁻¹. It showed metallic behaviour in the temperature range 78-300 K, and its conduction mechanism obeyed Mott's variable range hopping (VRH) model in the same temperature range. The density of states at Fermi …

The Effect Of Aluminium Oxide And Cerium Oxide As Dispersoids In Chitosan-Lithium Acetate Complexes, Hoi Mien Leow

Student Works (2000-2009)

In this study, chitosan with 85% deacetylation was used with Ni(OAc)₂·2H₂O as doping salt and Al₂O₃, or CeO₂ as dispersoid. They were mixed in certain weight percentages and dissolved in 100ml of 0.5% acetic acid solution. These solutions were poured into petri dishes and left at room temperature for film formation. Infrared Spectroscopy has shown that there is interaction between chitosan and LiOAc with and without dispersoid. The peaks are shifted. broadened. split and differs in intensity. The electrical conductivity of all samples was calculated using the bulk resistance value obtained from the complex admittance plot. The highest electrical conductivity …

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a coolant and a target material. There have been studies of LBE, especially by the Russians, but a fundamental understanding and verification of its role in the corrosion of steels is still very 2 incomplete. Post-experiment testing and analysis will be performed on steel samples that have been in intimate contact with LBE. Chemical alterations and resulting chemical species will be measured at the steel surface. Techniques to be …

42nd Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Abstracts from the 42nd annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-sponsored by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Broomfield, Colorado, July 30 - August 3, 2000.

A High Energy X-Ray And Neutron Scattering Study Of Iron Phosphate Glasses Containing Uranium, Mevlüt Karabulut, G. K. Marasinghe, C. S. Ray, Y. S. Badyal, M.-L. Saboungi, S. Shastri, D. Haeffner, George Daniel Waddill, D. E. Day

Materials Science and Engineering Faculty Research & Creative Works

The atomic structure of iron phosphate glasses containing uranium has been studied by complementary neutron and x-ray scattering techniques. by combining x-ray and neutron structure factors, detailed information about different pair interactions has been obtained. Most of the basic structural features such as coordination numbers and O-O and P-O distances in uranium containing glasses are the same as those in the base glass of batch composition 40Fe2O3-60P2O5 (mol %). However, the Fe-O distances change slightly with the addition of uranium. The observed structural parameters support a structural model in which the waste elements occupy voids in the Fe-O-P network, hence, …

Optical Investigation Of Molecular Beam Epitaxy AlXGa1-XN To Determine Material Quality, Judith L. Mcfall

Theses and Dissertations

The purpose of this research was to determine the quality of AIGaN samples with various mole fractions of aluminum doped with silicon. The samples utilized for this study were composed of an AIN buffer layer sandwiched between the sapphire substrate and AIGaN epilayer grown by molecular beam epitaxy (MBE). Cathodoluminescence (CL) and photoluminescence (PL) were employed to determine the mole fraction of aluminum in each sample. These techniques also gave insight into the material's nonuniformity, defects, and impurities. CL was run at 4 different beam energies (2,5,10, & 15 keV) with four different currents (1,10,50, & 90 µA) for the …