Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- High pressures (2)
- 1 (1)
- 3 (1)
- 5 (1)
- 7 Cyclooctatetraene (COT) (1)
-
- Al–Cu–Fe–Mg–Si system (1)
- Annulene (1)
- Antireflective coatings (1)
- Apoptosis (1)
- Aromaticity (1)
- Blue light (1)
- Blue light-induced damage (1)
- Bulk modulus (1)
- CZTS (1)
- Cellulose; Aerogels; Sonication; (1)
- Computational electrodynamics (1)
- Copper complexes (1)
- Crystals; High pressure (Science); Materials at high temperatures; Niobium compounds (1)
- Density Functional Theory (1)
- Energy sources (1)
- Eye health (1)
- Eyes (1)
- Fuzz (1)
- Gallium nitride (GaN) (1)
- Graphene (1)
- High pressure environments (1)
- High temperatures (1)
- LEDs (1)
- Liquidus surface projection (1)
- Low Energy Helium Ion Irradiation (1)
- Publication Year
- Publication
-
- Undergraduate Research Opportunities Program (UROP) (4)
- The 8th International Conference on Physical and Numerical Simulation of Materials Processing (3)
- The Summer Undergraduate Research Fellowship (SURF) Symposium (3)
- Research in the Capitol (2)
- Capstone Showcase (1)
-
- EURēCA: Exhibition of Undergraduate Research and Creative Achievement (1)
- Festival of Communities: UG Symposium (Posters) (1)
- Huskies Showcase (1)
- Idaho Conference on Undergraduate Research (1)
- ONU Student Research Colloquium (1)
- Posters-at-the-Capitol (1)
- Seaver College Research And Scholarly Achievement Symposium (1)
- Shared Knowledge Conference (1)
- Student Scholar Showcase (1)
- Symposium of Student Scholars (1)
- The International Student Science Fair 2018 (1)
- File Type
Articles 1 - 24 of 24
Full-Text Articles in Physics
Machine Learning Prediction Of Photoluminescence In Mos2: Challenges In Data Acquisition And A Solution Via Improved Crystal Synthesis, Ethan Swonger, John Mann, Jared Horstmann, Daniel Yang
Machine Learning Prediction Of Photoluminescence In Mos2: Challenges In Data Acquisition And A Solution Via Improved Crystal Synthesis, Ethan Swonger, John Mann, Jared Horstmann, Daniel Yang
Seaver College Research And Scholarly Achievement Symposium
Transition metal dichalcogenides (TMDCs) like molybdenum disulfide (MoS2) possess unique electronic and optical properties, making them promising materials for nanotechnology. Photoluminescence (PL) is a key indicator of MoS2 crystal quality. This study aimed to develop a machine-learning model capable of predicting the peak PL wavelength of single MoS2 crystals based on micrograph analysis. Our limited ability to consistently synthesize high-quality MoS2 crystals hampered our ability to create a large set of training data. The project focus shifted towards improving MoS2 crystal synthesis to generate improved training data. We implemented a novel approach utilizing low-pressure chemical vapor deposition (LPCVD) combined with …
High Energy Blue Light Induces Oxidative Stress And Retinal Cell Apoptosis, Jessica Malinsky
High Energy Blue Light Induces Oxidative Stress And Retinal Cell Apoptosis, Jessica Malinsky
Capstone Showcase
Blue light (BL) is a high energy, short wavelength spanning 400 to 500 nm. Found in technological and environmental forms, BL has been shown to induce photochemical damage of the retina by reactive oxygen species (ROS) production. Excess ROS leads to oxidative stress, which disrupts retinal mitochondrial structure and function. As mitochondria amply occupy photoreceptors, they also contribute to oxidative stress due to their selectively significant absorption of BL at 400 to 500 nm. ROS generation that induces oxidative stress subsequently promotes retinal mitochondrial apoptosis. BL filtering and preventative mechanisms have been suggested to improve or repair BL-induced retinal damage, …
Simulation Of Optical Properties Of Dielectric Layers From Visible To Near Infrared Spectral Range, Andrew Cochran, Cory Conkel
Simulation Of Optical Properties Of Dielectric Layers From Visible To Near Infrared Spectral Range, Andrew Cochran, Cory Conkel
ONU Student Research Colloquium
Optical properties of dielectrics play a critical role in various applications including the design and manufacture of optical components & devices such as detectors, filters, imagers, lenses, optical coatings, photonic crystals, sensors and waveguides, and solar cells. Radiative properties of varying thicknesses of different dielectrics such as Aluminum Oxide (Al2O3), Silicon Dioxide (SiO2), Indium Tin Oxide (ITO), Magnesium Fluoride (MgF2) and Silicon Nitride (Si3N4) have been simulated and compared in the range of visible to near infrared by mathematical modelling using MATLAB simulations. The results of the evolution of the radiative properties, as a function of dielectric material thickness, on …
Influence Of Sonication Parameters On The Morphology Of Nanocellulose Aerogels, Dexter Cox, Tim Kidd
Influence Of Sonication Parameters On The Morphology Of Nanocellulose Aerogels, Dexter Cox, Tim Kidd
Research in the Capitol
Nanocellulose is a renewable and biocompatible material that has a tensile strength similar to aluminum, is stiffer than Kevlar, and has a strength to weight ratio eight times that of stainless steel. There has been a range of studies on nanocellulose materials for potential use as a low-calorie food substitute, biomedical wound dressings, and as a structural component for buildings. Throughout this research experiment, nanocellulose aerogels of different mass compositions were created through a mechanical process using an ultrasonic processor with a titanium probe attachment. The purpose of this study was to develop a method that reduces the amount titanium …
Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti
Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti
Shared Knowledge Conference
Ultrasonic monitoring in cementitious materials is challenging due to the high degree of attenuation. In wellbore environments, monitoring becomes more challenging due to inaccessibility. Meta materials, also known as acoustic bandgap materials, exhibit an interesting feature of forbidding the propagation of elastic/sound waves and isolate vibration in a certain frequency band. Traditionally, acoustic bandgap materials are developed with inclusions such as tin, aluminum, gold, steel in a polymer matrix. In this study, we present the development of three-dimensional cementitious sensors capable of exhibiting stopbands in the acoustic transmission spectra using carbon nanotubes. Relatively wide stopbands were engineered using Floquet-Bloch periodic …
Two-Dimensional Layered Materials (Graphene-Mos2) Nanocatalysts For Hydrogen Production, Jacob Dobler, Taylor Robinson, Sanju Gupta 7455940
Two-Dimensional Layered Materials (Graphene-Mos2) Nanocatalysts For Hydrogen Production, Jacob Dobler, Taylor Robinson, Sanju Gupta 7455940
Posters-at-the-Capitol
Recent development of two-dimensional layered materials including graphene-family and related nanomaterials have arisen as potential game changer for energy, water and sensing applications. While graphene is a form of carbon arranged hexagonally within atomic thin sheet, MoS2 is becoming a popular, efficient, and cost-effective catalyst for electrochemical energy devices, in contrast to expensive platinum and palladium catalysts. In this work, we electrochemically desulfurize few-layer molybdenum disulfide (MoS2) and aerogels with reduced graphene oxide (rGO) prepared under hydrothermal conditions ((P< 20 bar, T< 200 oC), for improving hydrogen evolution reaction (HER) activity via point defects (S-vacancy). Moreover, the interactions between rGO …
Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks
Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks
The International Student Science Fair 2018
We have innovated “The Energy Conversion System for Travelers” or the ECoST. With the fact that most travelers have wheeled cabin-bags, whilst walking, the wheels will rotate so why don’t we harvest electricity from this kinetic energy? We thus install our innovation, the ECoST, to the bag to generate electricity from the spinning wheels. The electricity is then kept in the storage unit and ready to charge your empty battery devices in an emergency case via a USB port. To make life easy, our ECoST was designed to replicate the power bank charging method; therefore, we can charge …
Variable Temperature Thermochromic Switching Under Varying Illumination, Alexis Corbett, Danielle Hall, John E. Sinko
Variable Temperature Thermochromic Switching Under Varying Illumination, Alexis Corbett, Danielle Hall, John E. Sinko
Huskies Showcase
Award for "Runner-Up Poster Presentation".
Abstract
Minnesota is home to some of the greatest temperature ranges in the United States, with lows reaching below -40º Celsius and highs reaching nearly 40ºC. This results in higher than average spending on the heating and cooling of buildings. We have been investigating into responsive building materials to help address this. In particular, we have been studying a thermochromic paint that can capture solar energy and transfer it into the building as heat at low temperatures and reflect the energy at higher temperatures to keep the building cooler.
Characterization Of Magnetic Thin Films Using The Magneto Optic Kerr Effect, Nicholas J. Savino
Characterization Of Magnetic Thin Films Using The Magneto Optic Kerr Effect, Nicholas J. Savino
Student Scholar Showcase
Understanding magnetic properties of materials allows for advances in applications such as data storage. The Magneto-Optic Kerr Effect (MOKE) displays the reflective response a magnetic material has to a magnetic field. When polarized light reflects off of a magnetic material, the polarization orientation can change. The application of an external magnetic field can affect how much this polarization changes in a non-linear manner. Hysteresis loops are created when examining the relationship between intensity of the reflected light to the applied magnetic field provide information about magnetic properties of that material, such as the coercive field and field retention. Preliminary measurements …
Effect Of Fe Substitution On Structural, Magnetic And Electron-Transport Properties Of Half-Metallic Co2tisi, Juliana Herran, Parashu Kharel, Pavel Lukashev
Effect Of Fe Substitution On Structural, Magnetic And Electron-Transport Properties Of Half-Metallic Co2tisi, Juliana Herran, Parashu Kharel, Pavel Lukashev
Research in the Capitol
In recent years, research on magnetic materials has been one of the most technologically appealing developments in materials science. Among other applications, magnetic materials are essential components of data storage and information processing in computer hardware elements, such as hard drives and random access memories. Here, we present a theoretical study of structural, magnetic and electronic properties of ferrimagnetic Co2Ti1−xFexSi (x = 0, 0.25, 0.5), using density functional calculations. We show that the magnetic moment of Co2Ti1−xFexSi increases when Ti is substituted with Fe, consistent with experimental findings. …
Verifying The Implementation Of An Anisotropic Grain Boundary Energy Model In Idaho National Lab’S Marmot, John-Michael H. Bradley, Evan D. Hansen, Jarin C. French, Yongfeng Zhang (Mentor)
Verifying The Implementation Of An Anisotropic Grain Boundary Energy Model In Idaho National Lab’S Marmot, John-Michael H. Bradley, Evan D. Hansen, Jarin C. French, Yongfeng Zhang (Mentor)
Idaho Conference on Undergraduate Research
This work aims to verify the correct implementation of an anisotropic grain boundary (GB) energy model for face-centered cubic (FCC) and fluorite materials in Idaho National Laboratory’s phase field fuel performance code MARMOT. The model was recently implemented in MARMOT with the purpose of enabling higher fidelity simulations of UO2 nuclear fuels. As part of verification, tests were performed to measure the energy dependence on misorientation of high symmetry GBs in an FCC metal (Cu). The energies of the [100], [110], and [111] twist boundaries result as predicted, as do the energies of the [111] symmetric tilt boundaries. However, …
Thermodynamic Calculation Of The Liquidus Surface Projection Of Multi-Component Aluminum Alloys, Jingrui Zhao, Yong Du, Lijun Zhang, Jixue Zhou, Yuansheng Yang
Thermodynamic Calculation Of The Liquidus Surface Projection Of Multi-Component Aluminum Alloys, Jingrui Zhao, Yong Du, Lijun Zhang, Jixue Zhou, Yuansheng Yang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
An Antireflective Tco Film For Czts Solar Cells, Feng Zhan
An Antireflective Tco Film For Czts Solar Cells, Feng Zhan
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Thermoelectric Magnetohydrodynamic Effects In Solidification Processes, Andrew Kao, Koulis Pericleous, Peter Lee, Biao Cai, Jianrong Gao
Thermoelectric Magnetohydrodynamic Effects In Solidification Processes, Andrew Kao, Koulis Pericleous, Peter Lee, Biao Cai, Jianrong Gao
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Photonicstd-2d: Modeling Light Scattering In Periodic Multilayer Photonic Structures, Alexey Bondarev, Shaimaa Azzam, Zhaxylyk Kudyshev, Alexander V. Kildishev
Photonicstd-2d: Modeling Light Scattering In Periodic Multilayer Photonic Structures, Alexey Bondarev, Shaimaa Azzam, Zhaxylyk Kudyshev, Alexander V. Kildishev
The Summer Undergraduate Research Fellowship (SURF) Symposium
Efficient modeling of electromagnetic processes in optical and plasmonic metamaterials is important for enabling new and exciting ways to manipulate light for advanced applications. In this work, we put together a tool for numerical simulation of propagation of normally incident light through a nanostructured multilayer composite material. The user builds a unit cell of a given material layer-by-layer starting from a substrate up to a superstrate, splitting each layer further into segments. The segments are defined by width and material -- dielectric, metal or active medium. Simulations are performed with the finite difference time domain (FDTD) method. A database of …
Effect Of Helium Ions Energy On Molybdenum Surfaces Under Extreme Conditions, Joseph Fiala, Jitendra K. Tripathi, Sean Gonderman, Ahmed Hassanein
Effect Of Helium Ions Energy On Molybdenum Surfaces Under Extreme Conditions, Joseph Fiala, Jitendra K. Tripathi, Sean Gonderman, Ahmed Hassanein
The Summer Undergraduate Research Fellowship (SURF) Symposium
Plasma facing components (PFCs) in fusion devices must be able to withstand high temperatures and erosion due to incident energetic ion radiations. Tungsten has become the material of choice for PFCs due to its high strength, thermal conductivity, and low erosion rate. However, its surface deteriorates significantly under helium ion irradiation in fusion-like conditions and forms nanoscopic fiber-like structures, or fuzz. Fuzz is brittle in nature and has relatively lower thermal conductivity than that of the bulk material. Small amounts of fuzz may lead to excessive contamination of the plasma, preventing the fusion reaction from taking place. Despite recent efforts, …
Crystal Nucleation Of Palladium-Doped Lithium Disilicate Glass, Gregory Humble
Crystal Nucleation Of Palladium-Doped Lithium Disilicate Glass, Gregory Humble
Symposium of Student Scholars
The effect of concentration of palladium particles on crystal nucleation was investigated for lithium disilicate glass. The heterogeneous nucleation rate for 470°C and 480°C were calculated for a concentration of 0.001% palladium by weight. The DTA method of measuring nucleation and crystallization was used in this calculation.
Using Ab Initio Simulations To Examine The Flexoelectric Effect In Perovskites, Austin B. Plymill
Using Ab Initio Simulations To Examine The Flexoelectric Effect In Perovskites, Austin B. Plymill
EURēCA: Exhibition of Undergraduate Research and Creative Achievement
Flexoelectricity is a property that dielectric materials exhibit where they produce polarization when subject to an inhomogeneous deformation. In the past, this effect has been largely ignored, as its effect in bulk materials has been much less significant than the related effect of piezoelectricity, the polarization of material due to uniform deformation. Interest in flexoelectricity has been increasing in recent years due to the development of nanotechnologies. Flexoelectricity is proportional to the strain gradient a material is subjected to making the flexoelectric effect immense on the nanoscale. Additionally, the flexoelectric effect scales with the dielectric constant making it have a …
Building Predictive Chemistry Models, Christopher Browne, Nicolas Onofrio, Alejandro Strachan
Building Predictive Chemistry Models, Christopher Browne, Nicolas Onofrio, Alejandro Strachan
The Summer Undergraduate Research Fellowship (SURF) Symposium
Density Functional Theory (DFT) simulations allow for sophisticated modeling of chemical interactions, but the extreme computational cost makes it inviable for large scale applications. Molecular dynamics models, specifically ReaxFF, can model much larger simulations with greater speed, but with lesser accuracy. The accuracy of ReaxFF can be improved by comparing predictions of both methods and tuning ReaxFF’s parameters. Molecular capabilities of ReaxFF were gauged by simulating copper complexes in water over a 200 ps range, and comparing energy predictions against ReaxFF. To gauge solid state capabilities, volumetric strain was applied to simulated copper bulk and the strain response functions used …
High Pressure Structural Studies On Nb5si3 Up To 26.2 Gpa, Brandon Stewart, Ravhi S. Kumar
High Pressure Structural Studies On Nb5si3 Up To 26.2 Gpa, Brandon Stewart, Ravhi S. Kumar
Undergraduate Research Opportunities Program (UROP)
With the use of synchrotron techniques, we can better understand how crystalline structures behave under extreme conditions. This yields the opportunity to resolve complex crystal structures [1]. Here, we focus on the high pressure crystal structure of Nb5Si3. Refractory metal silicides are an important class of materials as they are used in high temperature applications such as turbines and aerospace modules. As an example, the performance of a jet engine is highly influenced by the maximum internal pressure and temperature possible. Obtaining higher levels of thrust is dependent upon the material's ability to remain structurally sound under extreme temperatures and …
Graphene: Material That Will Change The Future, Jigar Desai, Darryl Reese
Graphene: Material That Will Change The Future, Jigar Desai, Darryl Reese
Festival of Communities: UG Symposium (Posters)
Graphene is the most recent material discovered by scientists and is a star on the horizon of materials science and condensed matter physics. The one atom thick, two dimensional materials is an amazing conductor of electricity. Although graphene was not discovered completely until 2004, it has already revealed potential applications and scientists have begun researching ways of developing graphene products for the market. Only two products have been successfully produced so far, but scientists have encountered amazing results. This material has many potential applications in the real world and is about to change the future in a positive way.
The Effects Of Pressure On Wide Bandgap Gan Semiconductors, William Kang, Linda Tran, Eunja Kim
The Effects Of Pressure On Wide Bandgap Gan Semiconductors, William Kang, Linda Tran, Eunja Kim
Undergraduate Research Opportunities Program (UROP)
Gallium nitride (GaN) is a group-III nitride semiconductor; which may prove useful in developing optical instruments that operate under high ambient pressures. The purpose of this project is to examine the properties of GaN under varying conditions. The methods used in this experiment consist of modeling free energy as a function of lattice constants; calculating bond lengths, bond strengths, and bulk moduli; and comparing the resultant data with values in published literature. We will also compare these results with experimental data drawn from x-ray diffraction scans. By doing so, we hope to determine whether gallium nitride is suitable for use …
Structural Studies Of Crsi2 At High Pressures And Temperatures, Weldu Gabrimicael, Ravhi S. Kumar, Andrew Cornelius
Structural Studies Of Crsi2 At High Pressures And Temperatures, Weldu Gabrimicael, Ravhi S. Kumar, Andrew Cornelius
Undergraduate Research Opportunities Program (UROP)
It is of extreme importance to develop new potential energy sources to reduce dependence on fossil fuels. As a result of this, the study of thermoelectric materials, capable of changing heat into electrical energy, has become a field of great interest regarding fundamental properties. To help better understand these materials, facilities for the measurement of relevant properties at high pressure have been developed, but lack the ability to characterize the materials at high temperature and pressure. Therefore, this project has the goal of developing a heater arrangement to be used in conjunction with the high pressure capabilities already developed to …
Raman Studies Of 1,3,5,7 Cyclooctatetraene At High Pressure, Martin Galley, Ed Romano, Sergey Tkachev, Michael Pravica
Raman Studies Of 1,3,5,7 Cyclooctatetraene At High Pressure, Martin Galley, Ed Romano, Sergey Tkachev, Michael Pravica
Undergraduate Research Opportunities Program (UROP)
We performed Raman spectroscopic studies of 1,3,5,7-cyclooctatetraene at elevated pressures up to 10 GPa with the aim of examining possible planarization of the molecule and further studying two prior-discovered phases of the solid with pressure. The Raman excitation source was a Krypton-ion laser operating at 674.1 nm (give wavelength).
1,3,5,7 Cyclooctatetraene has an octagonal formation however it is not aromatic or anti-aromatic (not a subject to the 4n+2 Huckel’s rule) [1]. As a result, its adopts a somewhat reactive tub shape. Upon the addition or removal of one to two electrons under ambient conditions, the molecule planarizes and becomes aromatic …