Physics Commons^™

Unified Study Of The Classical Hall Effect, Carter J. Reed, Javier E. Hasbun, Wyatt E. Ackerman, L Ajith Desilva

Georgia Journal of Science

Germanium (Ge) samples with different doping types, acceptors (p-type) and donors (n-type), were studied to investigate charge carrier behavior. Carrier concentrations were found to be 1.16×10^21 m^(-3) for the p-type sample and 7.337×10^20 m^(-3) for the n-type sample. These experiments were conducted for the standard Hall effect (Hall voltage versus low magnetic field (B) values) as well as conductivity and Hall voltage versus temperature for different B-fields. The measurements versus temperature at zero-field allow us to obtain band gap ( Eg). While we investigate the conductivities for n-type and p-type doped samples, we also study the conductivity of an undoped …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

64th Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 64th annual meeting of the Rocky Mountain Conference on Magnetic Resonance. Held in the Snowbird Resort and Conference Center, Snowbird, Utah, August 3-7, 2025.

Advancing Lithium-Ion Batteries Through Exploration Of Novel Physico-Chemical Phenomena, Peshal Karki

All Dissertations

Lithium-ion batteries (LIBs) power a wide range of modern devices, from smartphones to electric vehicles. This dissertation integrates materials characterization and electrochemical testing to develop novel Si-based electrode materials, investigate separator effects, and improve electrochemical impedance spectroscopy (EIS) modeling. First, I synthesized Si@CC composites using bio-based carbon sources and discovered a novel in situ disorder reduction in the amorphous carbon cloud during cycling, attributed to Si volume fluctuations and mesoporous carbon structure, which enhanced capacity retention. A binder-free electrode (Si@CC@BP) using bucky paper further improved gravimetric and areal capacities while reducing weight and manufacturing complexity.

Next, I investigated how separator …

Ferroelectricity And Multiferroicity In Ultrathin Films Of Unconventional Transition Metal Oxide, Xin Li

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

Ferroic orders of transition metal oxides, such as ferroelectricity and ferromagnetism, are determined by the intercoupling between spin, charge, lattice. Consequently, ferroic epitaxial thin films have attracted wide interest due to the profuse novel phenomena and the great application potentials for modern electronics. However, the mainstream of the study for transition metal oxides has focused on perovskite structure, limiting the understanding and discovery of novel phenomena associate with ferroic orders. In this thesis, the epitaxial films of hexagonal rare-earth ferrites (h-RFeO₃) and fluorite-structure hafnia oxide (HfO₂) are studied comprehensively, providing new experimental and theoretic …

Enhancing The Design Of Strained Superlattice Gallium Arsenide Based Photocathodes With Distributed Bragg Reflector, Adam D. A. Masters

Electrical & Computer Engineering Theses & Dissertations

Particle accelerators play a crucial role in our understanding of matter and the universe and have numerous practical applications in various fields. These devices enable scientists to examine the smallest components of matter, study the forces that govern their interactions, and probe conditions from the early universe. Moreover, accelerators are valuable in medicine, industry, and research, enhancing imaging methods, cancer therapies, and manufacturing techniques. As the experiments conducted at these facilities evolve and require higher precision, improved particle sources must continue to advance to keep up with their requirements. To do that, we enhanced the design of spin polarized electron …

Synthesis, Structural Characterization And Optical Studies Of Silver-Indium-(Zinc)-Chalcogenide Fluorescent Quantum Dots, Sujal Acharya

Graduate Theses and Dissertations

Developing a non-toxic, high-performance fluorescent nanomaterial is crucial for overcoming the environmental and health restrictions of current cadmium, and lead based quantum dots (QDs), which limit the application of quantum dots in optoelectronics and bioimaging. In this thesis, we synthesized environmentally friendly AgInS2 QDs by a colloidal method, systematically altering the In/Ag precursor ratio from 2 to 6 to study the impact on their optical and photophysical properties. Our goals were to find the optimal stoichiometry for maximum quantum efficiency and stability. We also investigated further improving optical and photophysical properties through shelling with ZnS. The emission spectra appeared broad, …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Development Of Non-Precious Iron-Cobalt Alloy Catalyst For Electrocatalytic Reaction, Harsh Panchal

Electronic Theses & Dissertations

The development of a FeCo alloy catalyst with tunable Fe/Co ratios is examined to improve electrocatalytic performance in reactions like the oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR). Many energy conversion devices, such as fuel cells, metal-air batteries, and water-splitting systems, depend on these interactions to function. These technologies have huge potential to meet the increasing need for hydrogen production and renewable energy sources worldwide, which are critical to attaining a sustainable energy future. When compared with noble metal-based catalysts, the FeCo alloy catalyst shows much higher catalytic activity, according to previous studies. Hydrothermal …

Direct Computations Of Spatially Resolved Viscoelastic Moduli Of Biomolecular Condensates, Liwen Gu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Biomolecular condensates are viscoelastic materials formed by liquid-liquid phase separations (LLPS) of biopolymers. In this study, we develop a modified graph Laplacian-based collective model to characterize viscoelastic heterogeneity within condensates based on results of lattice-based Metropolis Monte Carlo (MMC) simulations. By integrating random graph models and simulations of A1-LCD, a type of intrinsically disordered protein, we examine how network topology influences storage modulus, loss modulus, crossover frequency, and relaxation time spectra. Our results reveal a strong correlation between topological features and mechanical response, with the condensate interior exhibiting higher stiffness and faster relaxation than the interface. The relaxation spectra provide …

First-Principles Studies Of Electrical Polarization Effects In Ferroelectrics, Antiferroelectrics And Defects, Louis Alaerts

Dartmouth College Ph.D Dissertations

Over the last few decades, density functional theory (DFT) has emerged as a formidable tool in the field of computational material science. Not only has it become a complementary method approach to experiments by rationalizing the many complex properties of materials but its formidable predictive power can also be used to identify the most promising candidates for specific applications. Point defects in semiconductors have become an important platform for the development of quantum networks due to their ability to act as spin-photon interfaces. Spectral diffusion, the broadening of the optical emission line, can significantly impact the performance of these defect-based …

Low-Field Magnetoresistance In Nanocomposites Of La₀.₇Sr₀.₃Mno₃ And Metal Oxides, Nicholas K. Thiel-Hudson

University Scholar Projects

Pure La_0.7Sr_0.3MnO₃ (LSMO) exhibits colossal magnetoresistance (CMR) with large applied magnetic field over a narrow temperature range (intrinsic behavior), limiting its application to narrow temperature ranges. In contrast, the extrinsic CMR effect originates from inhomogeneities at larger length scales, such as grain boundaries and phase separation, where the structural features act as tunneling barriers, leading to a low-field magnetoresistance (LFMR) response, thereby expanding the application of LSMO into the low-field regime over a broader temperature range. In this work, the magnetotransport behavior of pure LSMO thin film is compared to the composite layered heterostructures of …

Signal Modeling Of High Purity Germanium Detectors, Brooke Parker Thibodeau

Honors Scholar Theses

Pulse shape analysis can be used to analyze radiation incident on a semiconductor diode detector. Finite element analysis (FEA) can be used to simulate high purity germanium detectors with user-specified geometry, impurity concentration, and bias voltage. Subsequent streamline calculation can be used to conduct pulse shape analysis for single and multiple site gamma-ray interactions within the detector volume. Cross sections of the detector can be visualized by contour plots of the electric field, drift velocity magnitude, and collection time, as well as t30 and t90 rise-time values.

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Computational Modeling Of Astrophysical Systems, Leleya Iris Stallard

Spring Showcase for Research and Creative Inquiry

This research project focuses on the computational modeling of astrophysical systems using Femap with NX Nastran. The goal was to simulate and analyze the vibrational behavior and structural deformation of celestial bodies under different material compositions and collision conditions. Materials such as iron, granite, titanium, and models for white dwarf stars were used to investigate how varying physical properties affect the systems' dynamic responses. Both isotropic and anisotropic models were created to represent realistic astrophysical materials. Through static and modal analyses, the study explored how internal structure and material stiffness influence the reaction of celestial objects to applied forces and …

Josephson Junctions: Fabrication And Applications For The Axion Dark Matter Experiment, Jonah M. Sachs

Senior Honors Papers / Undergraduate Theses

The observation of axions could revolutionize the world of physics. Through microwave frequency cavity readout of the photons associated with these axions, the ADMX project at WashU utilizes multiple different forms of the Josephson junction (JJ), a superconductive circuit element. The physics behind the JJ are essential to understanding its operation for resonant cavity readout in addition to parametric amplification. Parametric amplifiers produced using JJs can approach the signal-to-noise ratio set by quantum mechanics, and prove essential for the amplification chain used by the ADMX experiment for axionic detection. The limits of these amplifiers are set by the noise tuning …

Exploring Corona Discharge In Electrostatic Printing For Electronics And In Other Application, Zijian Weng

USF Tampa Graduate Theses and Dissertations

The field of printed electronics (PEs) is expanding rapidly, driven by increasing market demand. According to reports, the global market for PEs is expected to reach $23 billion by 2026, with a compound annual growth rate of 18.3% from 2023 to 2028. This growth necessitates the development of innovative printing technologies that can meet these demands efficiently, delivering high-quality, high-resolution PEs suitable for applications in health, environmental monitoring, sports, aerospace, and more.

Currently, PEs manufacturing relies on two main groups of printing technologies. Contact printing methods offer high-speed production but struggle with precision, while non-contact methods provide high resolution but …

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

Transfer Efficiencies Of Surface-To-Surface Transport Of Micron-Sized Actinide Surrogate Particles, Austin R. Powell

Theses and Dissertations

Particle effluent of varying sizes is released during routine activities within laboratory environments and these particles can come in contact with a wide range of surfaces. Particles of micron size or smaller can be especially pervasive and can transfer between multiple subsequent surfaces, leading to the progressive contamination of a laboratory. Understanding the transport dynamics of micron sized particles will help inform facility personnel of the possibility of contamination by these potentially hazardous materials of interest. In this research, the transfer efficiency of micron sized surrogate actinide particles (Europium-doped Gadolinium Oxysulfide (EGOS)) is measured for multiple materials, between two particle …

Material Classification With Spectropolarimetric Lidar, Alexander J. Watson

Theses and Dissertations

A method for characterizing unknown targets using a hyperspectral polarimetric light detection and ranging (LiDAR) system is presented. Light reflected from manmade objects tends to be more polarized than light reflected from objects in the natural world. As such, polarization measurements can be used in remote sensing applications to differentiate artificial and natural objects. Previous works have attempted to characterize objects through passive polarimetric imagery. Methods developed by Cain and Lemaster and Cunningham facilitate reconstruction of the Stokes Vector from returning light. Martin used multispectral polarimetry to classify targets when the angle of incidence (AOI) is close to 0º. Here, …

Novel Approach For The Micro Cracks Detection Of Solar Wafers And Cells, Mohd Israil, Arvind Kumar Sharma, Ekta Gupta

Al-Bahir

This paper deals with the review of various existing technique for the microcracks detection in silicon solar cell and wafer. In addition to this, we proposed a novel approach for the machine learning technique for the inspection of the cracks those are existed in the solar cell and wafer and not able to detect by the naked eyes. There are many techniques have been developed by the various researchers around the world to inspect solar cells for defect. All the techniques discussed in this article having some features and some weakness too. This paper present here gives the two-fold solution …

Fabrication Of Microscale Oxide Architectures On Silicon Via A Cmos-Compatible, Deposition-Last Process, Jamal A. Brown

Material Science and Engineering Theses - Archive

This work explores the feasibility of integrating complex oxide devices on silicon using a CMOS-compatible, deposition-last approach. While previous demonstrations of this method have succeeded at larger scales, this study focuses on extending the process to microscale features, with lateral dimensions as small as two microns. The fabrication sequence begins with photolithographic patterning and reactive ion etching of the silicon substrate, followed by the deposition of a silicon nitride mask to delineate device regions. We then epitaxially grew SrTiO3 and La-doped SrTiO3 layers on top of the nitride mask via molecular beam epitaxy. Electrical transport measurements of the La:STO layer …

A Fault-Tolerant Exchange-Coupled Spin-Ensemble Qubit At Elevated-Temperatures, Aniruddha Chakraborty

Theses and Dissertations

This thesis introduces a novel qubit architecture: the ferromagnetic exchange-coupled spin ensemble qubit (E-qubit), designed to address the noise-induced instability. In this work, the time evolution of the ensemble’s density matrix is studied using the Liouville–von Neumann equation. To benchmark against a single-spin qubit, the gate fidelity of an E-qubit is computed in the presence of thermal noise. Coherence time is also analyzed under identical thermal condition and a linear scaling is observed with qubit size . The results show that, at 6 K , the gate fidelity error (0.7 % ) of the seven- spin ensemble is an order …

Preparation Of Mocvd-Grown Photocathodes Containing A Strained Gaas/Gaasp Superlattice, G. Blume, A. Masters, J. Grames, M. Stutzman, M. Grau, S. Marsillac

Physics Faculty Publications

In this work, we investigate heat cleaning options for high-polarization GaAs/GaAsP strained-superlattice (SSL) photocathodes with a distributed Bragg reflector (DBR) that were grown using metalorganic chemical vapor deposition (MOCVD). This was done using a microMott polarimeter at Jefferson Lab to optimize both quantum efficiency and polarization. The fabrication process for MOCVD-grown photocathodes does not allow for the inclusion of an arsenic cap, contrary to what is done when fabricating photocathodes using molecular-beam epitaxy (MBE). Without proper preparation, the performance of MOCVD-grown photocathodes can be limited due to surface contamination. Here, we varied both duration and temperature of the heat cleaning …

Outgassing Measurements Of Bare And Magnetite-Coated Low-Carbon Steel Vacuum Chambers, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

The outgassing properties of bare and magnetite-coated AISI 1020 low-carbon steel vacuum chambers were evaluated to establish material selection criteria for extreme high vacuum applications, namely, to explore the possibility of using these materials to build next-generation spin-polarized photoelectron guns. Water outgassing measurements using the throughput method revealed that the magnetite-coated chamber exhibited five times lower outgassing at room temperature prior to baking, but this advantage disappears after 80 °C baking. Hydrogen outgassing measurements demonstrated significant differences after intensive heat treatment: the bare low-carbon steel vacuum chamber achieved a specific outgassing rate of 9.6 × 10⁻¹⁶ Torr L s …

Investigation Of New Superconducting Materials For The Next Generation High-Performance Rf Superconducting Cavities For Particle Accelerators, Alex Gurevich, Jean Delayen, Chang-Beom Eom, Gianluigi Ciovati

Physics Faculty Publications

In this DOE-funded project DE-SC0010081-020 Old Dominion University (ODU) in collaboration with University of Wisconsin (UW) and Jefferson Laboratory have investigated both experimentally and theoretically electromagnetic response and losses in multilayered superconducting structures made of new SRF materials which can push the field and Q performance limits of accelerating cavities.

Optimizing Superconducting Nb Film Cavities By Mitigating Medium-Field Q-Slope Through Annealing, B. Abdisatarov, G. Eremeev, H. E. Elsayed-Ali, D. Bafia, A. Murthy, Z. Sung, A. Netepenko, A. Romanenko, C. P.A. Carlos, G. J. Rosaz, S. Calatroni, S. Leith, A. Grassellino

Electrical & Computer Engineering Faculty Publications

Niobium films are of interest in applications in various superconducting devices, such as superconducting radiofrequency cavities for particle accelerators and superconducting qubits for quantum computing. In this study, we address the persistent medium-field Q-slope issue in Nb film cavities, which, despite their high-quality factor at low RF fields, exhibit a significant Q-slope at medium RF fields compared to bulk Nb cavities. Traditional heat treatments, effective in reducing surface resistance and mitigating the Q-slope in bulk Nb cavities, are challenging for Nb-coated copper cavities. To overcome this challenge, we employed DC bias high-power impulse magnetron sputtering to deposit …