Materials Chemistry Commons^™

Ionic Thermoelectric Paper, Fei Jiao, Ali Naderi, Dan Zhao, Joshua Schlueter, Maryam Shahi, Jonas Sundström, Hjalmar Granberg, Jesper Edberg, Ujwala Ail, Joseph W. Brill, Tom Lindström, Magnus Berggren, Xavier Crispin

Physics and Astronomy Faculty Publications

Ionic thermoelectric materials, for example, polyelectrolytes such as polystyrene sulfonate sodium (PSSNa), constitute a new class of materials which are attracting interest because of their large Seebeck coefficient and the possibility that they could be used in ionic thermoelectric SCs (ITESCs) and field effect transistors. However, pure polyelectrolyte membranes are not robust or flexible. In this paper, the preparation of ionic thermoelectric paper using a simple, scalable and cost-effective method is described. After a composite was fabricated with nanofibrillated cellulose (NFC), the resulting NFC–PSSNa paper is flexible and mechanically robust, which is desirable if it is to be used in …

Electrocarboxylation: An Effective Process For Fixation Of Co2 Into Organic Carboxylic Acids, Huan Wang, Jia-Xing Lu

Journal of Electrochemistry

Conversion and utilization of greenhouse gas carbon dioxide (CO₂) have become more and more significant to the sustainable development of the global economy. Among them, electrocarboxylation of organic substrates is an effective process. Under mild conditions such as ambient temperature and pressure, carbocations generated by electroreduction of organic substrates can react with CO₂ into corresponding carboxylic acids. This paper introduces the recent progress of our group in electrochemical carboxylation, including electrocarboxylation of varies active organic substrates and asymmetric electrocarboxylation.

Electrochemical Synthesis Of Homoallylic Alcohols And Homoallylic Amines, Wei-Qiang Zhong, Xiang-Hui Liang, Jing-Mei Huang

Journal of Electrochemistry

Electrochemical technique has been widely applied in the organic synthesis. This review focuses on the electrochemical synthesis of homoallylic alcohols and homoallylic amines from the allylation of carbonyl compounds and imines. This method has been developed impressively, especially in the field of electrochemical allylation in a green solvent of aqueous media. Improvement of the efficiency of the electricity, regio-selectivity and chiral synthesis are expected.

Preparations And Characterizations Of Ti/Pbo2 Electrodes Modified With Rare Earth Of Praseodymium And Pvp In Electrochemical Degradation Of Organics, Mai Xu, Feng-Wu Wang, Xian Liang, Yi-Jun Wei, Wen-Yan Fang, Chuan-Gao Zhu, Yun-Hu Hun

Journal of Electrochemistry

The titanium (Ti) based lead oxide (PbO₂) electrodes doped with praseodymium oxide (Pr₂O₃) and polyvinylpyrrolidone (PVP) were prepared by electrodeposition. The surface morphologies and structures of the as-prepared thin films were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) technique, respectively. The results showed that the denser and more uniform coatings with smaller particles and larger surfaces were obtained by doping, which modified the micro-structure of the Ti/SnO₂-Sb₂O₃/Pr₂O₃-PVP-PbO₂ electrode. Cyclic voltammetry (CV) was also used to study the electrocatalytic activity of …

Electrocatalysis Of Nanotin Dioxide In The Battery Reaction Of Zinc-Nitrobenzene, Xu-Guo Tu, Xiang-Yu Ma, Rui-Nan He, Xiao-Juan Wang, Chen Ling, Yun-Xia Sun, Song Chen

Journal of Electrochemistry

The tin dioxide (SnO₂) nanoparticles were synthesized by using a simple hydrothermal route in the presence of tetrapropyl ammonium bromide (TPAB) as a surfactant. Accordingly, the titanium mesh based SnO₂ catalyst electrode was prepared. The morphologies and structures of SnO₂ nanostructures were characterized by scanning electron microscopy and X-ray diffraction spectrometry. The influences of reactant concentration, reaction temperature and time on the morphology of the products were investigated in detail. The electrocatalytic performance of SnO₂ for the reduction of nitrobenzene with zinc was studied. Possible formation process and growth mechanism for such hierarchical SnO_{2 …}

Selective Direct Electro-Oxidation Of C-H Bond, Yan-Mei Liao, Qian-Qian Wu, An-Lun Zhang, Ying-Hong Zhu, Chun-An Ma

Journal of Electrochemistry

Carbon-hydrogen (C-H) bond is the most basic chemical bond in organic compounds. The activation and direct conversion of C-H bond are the effective methodology for synthesis of different kinds of organic compounds from alkane compounds. The oxidative activation and functionalization of C-H bonds constitute an important and challenging area of investigation. The electro-oxidative activation of C-H bonds to form new C-O, C-C and C-N bonds has proven to be interesting and important in organic chemistry using the clean electron as the oxidant. The target C-O, C-C and C-N compounds could be selectively achieved by choosing the appropriate electrode, supporting electrolyte …

Wastewater Treatment Process Based On Microbial Electrochemistry: Opportunities And Challenges, Wei-Hua He, Jia Liu, Hai-Man Wang, Yu-Jie Feng

Journal of Electrochemistry

Microbial electrochemical technology (MET) has drawn great attention for its characteristics of synergetic pollution removal and energy recovery of wastewater. In the last decade, significant developments in microbial electrochemical system (MES) have been made in the aspects of electron transfer mechanism, microbial community analysis, function expansion, low-cost electrode materials and scaled-up constructions. However, the feasibility of MET as a wastewater treatment process has been controversial so far. In this paper, the characteristics of MET were systematically compared with anaerobic and aerobic processes from the application point of view in the aspects of pollution degradation and energy recovery processes. The MET-based …

Cathodic Electrochemiluminescence Of Meso-Tetra(4-Sulfophenyl)Porphyrin/Potassium Peroxydisulfate System, Yan-Fenga Wang, Dia Luo, Duo-Liang Shan, Xiao-Quan Lu

Journal of Electrochemistry

A new electrochemiluminescence (ECL) system in aqueous solution was constructed by using meso-tetra(4-sulfophenyl)porphyrin (TSPP) as a luminophoreand potassium peroxydisulfate (K2S2O8) as a reductive–oxidative coreactant. Upon sweeping from 0 V to -1.5 V, two cathodic ECL peaks were found simultaneously. One appeared at -0.8 V, which is corresponding to the reduction of TSPP, another at -1.2 V, that is attributed to the reduction of K2S2O8. And methylene blue could quench the ECL of TSPP effectively. In accordance with the linearity between quenching efficiency and the concentration of methylene blue, a method to determine methylene blue was established. The ECL mechanism was …

Characteristics And Mechanism For The Simons Electrochemical Fluorination Of Methanesulfonyl Fluoride, Wen-Lin Xu, Bao-Tong Li, Da-Wei Wang, Ya-Qiong Wang

Journal of Electrochemistry

The characteristics and mechanism for the Simons electrochemical fluorination processes were investigated during the electrochemical fluorination of CH₃SO₂F to CF₃SO₂F. The results showed that the reaction mechanism for the electrochemical fluorination of organic compounds to organic fluorides was the same as that of chemical fluorination processes using fluorinating agents such as CoF₃. The electrochemical fluorination in anhydrous HF was a heterogeneous process, and nickel fluorides on the surface of the nickel anode played the role of a mediator in the Simons process to transfer oxidation potential from the anode to …

Ionic Liquid-Supported Tempo/Polymeric Ionic-Liquid/Carbon Black Ternary Composites: Preparations And Applications In Electrochemical Oxidation Of Alcohols, Xin Lin, Cao-Cao Sun, Zhi-Rong Liu, Cheng-Chu Zeng

Journal of Electrochemistry

To effectively recover redox catalyst and supporting electrolyte, a novel ternary composite consisting of ionic liquid-supported TEMPO, polymeric ionic-liquid and carbon black was prepared. The ionic-liquid supported redox catalyst TEMPO-IL-BF₄ was firstly synthesized from 4-hydroxy-2,2,6,6-tetramethylpiperidine-N-oxyl, and followed by the reaction of polydimethyldiallylammonium chloride (PDDA) and bis(trifluoromethane)sulfonimide lithium salt (LiTFSI) to form poly[diallyldimethylammonium bis(trifluoromethanesulfonyl)imide] (PDDA(Tf₂N)). A combination of the above mentioned two synthesized materials and carbon black afforded to obtain the ternary composite, which was used as the recoverable supporting electrolyte and mediator for the electrochemical oxidation of alcohol. The results indicate that various alcohols could be oxidized …

Preparations And Applications Of Irsnox Electrode In Electrochemical Synthesis Of 2,5-Dichlorophenol, Xiang-Yu Ma, Xu-Guo Tu, Rui-Nan He, Ya Chen, Gui-Sheng Zhu, Shou-Yan Shao, Song Chen

Journal of Electrochemistry

The electrodes of titanium based iridium tin oxides (IrSnOx) have been prepared by traditional thermal decomposition method and further applied to the electrosynthsis of 2,5-dichlorophenol in order to explore a green and high efficient synthesis route. The results showed that the electrode surface existed apparent cracks, while the intermediate layer prepared with Sn:Sb=94:6 existed less cracks and longer life time. The main products of the electrolytic reaction were 2,5-dichlorophenol, p-chlorophenol, and 1,2,4-trichlorobenzene. The electrosynthsis yield of 2,5-dichlorophenol reached 57% and the selectivity of 2,5-dichlorophenol was as high as 93% by using the IrSnOx as an anode, which is obviously better …

Electrochemical Deposition Of Cr From Cr3+ In The Mixed Electrolyte Of [Bmim]Oac/H2O, Wei Luo, Dong-Fang Niu, Rong-Bin Du, Jun-Wei Wang, Zhu-Qing Wang, Heng Xu, Xin-Sheng Zhang

Journal of Electrochemistry

The electrochemical reduction of trivalent chromium ion (Cr³⁺) to Cr in 1-butyl-3-methylimidazolium acetate ([BMIM]OAc)-H₂O mixed electrolyte was investigated. The cyclic voltammograms showed that the electroreduction of Cr³⁺ in the mixed electrolyte occurred in a two-step process, namely, Cr³⁺ + e → Cr²⁺ and Cr²⁺ + 2e→ Cr⁰, controlled by the diffusion of Cr³⁺ to the electrode. The diffusion coefficient of Cr³⁺ was 1.2×10^-8 cm²/s at 40 ℃ obtained by Rendle-Sevcik equation. The chronoamperomograms of the Cr³⁺ electrodeposition confirmed the three-dimensional instantaneous nucleation mechanism of …

Naturally-Derived Molecular Ensembles In Medicine, Materials Science And Evolutionary Biology: An Interdisciplinary Study, Silvio Panettieri

Dissertations, Theses, and Capstone Projects

The first chapter will introduce the work carried out in collaboration with the Govind laboratory at CCNY. Our quest was set forth to investigate the intimate relationship lying between chronic inflammation and tumor development. For at least the last fifteen years much research has been conducted on this topic; yet, the level of complexity arising from exceedingly interwoven biochemical pathways in mammals has resulted in slow advancements in this field. This is why we resorted to a simple yet powerful immunogenetic model organism, the fruit fly Drosophila melanogaster, in combination with the administration of the most common anti-inflammatory drug, …

Chelating Ligands And Nanomaterials Based On Graphene Oxide For The Reduction And Sequestration Of Radiometals And Protein Purification, Sam Groveman

Dissertations, Theses, and Capstone Projects

Nuclear waste remediation and protein purification using immobilized metals can benefit enormously from the design and implementation of novel chelating nanomaterials. Available commercial resins capable of sequestering metals are based on bulk materials such as organic polymers, ceramics, and their composites. The use of two-dimensional nanoplatforms with large surface areas expands the horizon for the research and development of new systems with higher efficiency and lower cost. Fundamental science challenges remain in the synthesis and characterization of these nanomaterials and their integration with known or novel coordinating ligands.

Chemical exfoliation of graphite under strong oxidizing conditions yields graphene oxide (GO) …

A Comparison Study Of Two Synthesis Methods For Polymer Of Intrinsic Microporosity 1 (Pim-1), Conor S. Perry

Materials Engineering

Polymers of Intrinsic Microporosity (PIMs) are an emerging polymeric material class for molecular sieving applications. This study focuses on PIM-1, an alternating copolymer of 5,5’,6,6’-tetrahydroxy-3,3’,3,3’-tetramethyl-1,1’-spirobisindane and tetrafluoroterephthalonitrile synthesized via nucleophilic aromatic substitution. PIM-1 been widely studied as a gas separating material and filtering membrane, but in this case, it is studied as a battery separator material. PIM-1’s microporous (pore diameters less than 2 nm) structure allows smaller favorable ions to transport while preventing larger ions and compounds from transporting. Two synthesis methods, round bottom flask synthesis and ball mill synthesis, of PIM-1 are compared to see any improved characteristics. The …

Characterization Of Aquarefined Micro/Nanoporous Lead Material, Liam S. Russell, June Y. Suh

Materials Engineering

The process of aquarefining is an environmentally-friendly method for producing pure lead products that exhibit particularly low density. To observe the microstructures of these low-density forms of lead, scanning electron microscopy (SEM) was employed to examine aquarefined lead samples produced under three batches of processing conditions. Due to aquarefined lead's tendency to collapse under its own weight, careful measures were taken during transport and handling to avoid damaging the samples. Three types of microstructures were observed and correlated to changes in processing conditions: octahedron crystallites, microscales, and dendrites. Energy-dispersive x-ray spectrometry (EDS) was used to quantify the amount of oxygen …

Industrial Grade 2d Molybdenum Disulphide (Mos2): An In-Vitro Exploration Of The Impact On Cellular Uptake, Cytotoxicity, And Inflammation, Caroline Moore, Hugh Byrne, Jonathan N. Coleman, Yuri Volkov, Jennifer Mcintyre

Articles

The recent surge in graphene research, since its liquid phase monolayer isolation and characterization in 2004, has led to advancements which are accelerating the exploration of alternative 2D materials such as molybdenum disulphide (MoS2), whose unique physico-chemical properties can be exploited in applications ranging from cutting edge electronic devices to nanomedicine. However, to assess any potential impact on human health and the environment, the need to understand the bio-interaction of MoS2 at a cellular and sub-cellular level is critical. Notably, it is important to assess such potential impacts of materials which are produced by large scale production techniques, rather than …

Microwave-Assisted Topochemical Manipulation Of Layered Oxide Perovskites: From Inorganic Layered Oxides To Inorganic-Organic Hybrid Perovskites And Functionalized Metal-Oxide Nanosheets, Sara Akbarian-Tefaghi

LSU New Orleans Theses and Dissertations

Developing new materials with desired properties is a vital component of emerging technologies. Functional hybrid compounds make an important class of advanced materials that let us synergistically utilize the key features of the organic and inorganic counterparts in a single composite, providing a very strong tool to develop new materials with ”engineered” properties. The research presented here, summarizes efforts in the development of facile and efficient methods for the fabrication of three- and two-dimensional inorganic-organic hybrids based on layered oxide perovskites. Microwave radiation was exploited to rapidly fabricate and modify new and known materials. Despite the extensive utilization of microwaves …

Development Of Luminescent Quantum Dot-Enabled Nano- And Microplatforms For Multiplex Detection Of Biomarkers, Kristen S. Williams

LSU New Orleans Theses and Dissertations

Luminescent semiconductor quantum dots (QDs) are extensively researched for use in biological applications. They have unique optical and physical properties that make them excellent candidates to replace conventional organic dyes for cellular labeling, multiplexing, nucleic acid detection, and as generalized probes. The primary focus of this dissertation was to utilize quantum dots for improvement in immunoassays. Specifically, atherosclerosis biomarkers were detected simultaneously in an effort to demonstrate advances in early detection diagnostics.

Quantum dot-antibody bioconjugates were prepared by encapsulation into mesoporous silica and functionalized with thiol and amine groups to enable bioconjugation. Functionalization of the mesoporous silica quantum dot composites …

Design And Fabrication Of Nanostructures For The Enhancement Of Photovoltaic Devices, Richard M. Prevost Iii

LSU New Orleans Theses and Dissertations

In 2012 the net world electricity generation was 21.56 trillion kilowatt hours. Photovoltaics only accounted for only 0.1 trillion kilowatt hours, less than 1 % of the total power. Recently there has been a push to convert more energy production to renewable sources. In recent years a great deal of interest has been shown for dye sensitized solar cells. These devices use inexpensive materials and have reported efficiencies approaching 12% in the lab. Here methods have been studied to improve upon these, and other, devices. Different approaches for the addition of gold nanoparticles to TiO₂ films were studied. These …

Regioselective Baeyer–Villiger Oxidation Of Lignin Model Compounds With Tin Beta Zeolite Catalyst And Hydrogen Peroxide, John Adam Jennings, Sean R. Parkin, Eric Munson, Sean Delaney, Julie L. Calahan, Mark Isaacs, Kunlun Hong, Mark Crocker

Chemistry Faculty Publications

Lignin depolymerization represents a promising approach to the sustainable production of aromatic molecules. One potential approach to the stepwise depolymerization of lignin involves oxidation of the benzylic alcohol group in β-O-4 and β-1 linkages, followed by Baeyer–Villiger oxidation (BVO) of the resulting ketones and subsequent ester hydrolysis. Towards this goal, BVO reactions were performed on 2-adamantanone, a series of acetophenone derivatives, and lignin model compounds using a tin beta zeolite/hydrogen peroxide biphasic system. XRD, ¹¹⁹Sn MAS NMR spectroscopy, DRUVS and XPS were used to determine tin speciation in the catalyst, the presence of both framework Sn and extra framework …

Adsorption And Wetting In Model Mesoporous Silicas And In Complex Metal Oxide Catalysts, Karthik Jayaraman

Seton Hall University Dissertations and Theses (ETDs)

The surface of most metal oxides is covered by hydroxyl groups which influence many surface phenomena such as adsorption and wetting, catalysis and surface reactions. Surface chemistry of silica is a subject of exhaustive studies owing to a wide variety of practical applications of silica. In Chapter 1, a brief review of classification, synthesis and characterization of silica is provided. The hydroxylation of silica surface i.e the number of hydroxyl (-OH) groups on the surface is of utmost importance for its practical applications. In Chapter 2, a brief introduction to surface hydration of silica is provided followed by the gas …

Biowaste Derived Rigid Polyurethane Foams And Supercapacitors: A Renewable And Sustainable Alternative For Petrochemicals, Charith K. R. Akurana Gamaralalage

Electronic Theses & Dissertations

Bio-based polyol for rigid polyurethane (PU) foams and porous structured carbon as an electrode material for supercapacitors were synthesized from readily available biowaste precursor (orange peel) as an alternative to currently used petroleum-based starting materials. Synthesized bio-based polyols were characterized using FTIR, GPC, hydroxyl number, and viscosity measurements. These analyses indicated that intended bio-based polyol was obtained via thiol-ene chemistry with a high yield. Rigid PU foams prepared from bio-based polyol exhibited density around 35 kg/m³, maintained a regular cell structure with uniform cell distribution, closed cell content over 90%, and excellent compressive strength of ~230 kPa, suggesting …

Synthesis And Characterization Of Molybdenum Sulfide And For Hydrogen Evolution Reaction And Supercapacitor Applications, Zhuo Wang

Electronic Theses & Dissertations

To meet the constantly rising requirement of energy other than traditional fossil fuel and environment protection, it is a perfect time to development low cost, and efficient materials for clean energy production. Hydrogen generation by water splitting is one of the cleanest ways to produce cheaper energy. Hydrogen evolution reaction (HER) is one of the key steps in water splitting process. Ideally, the thermodynamic potential for HER should be at 0 V (vs. SHE). However, without an efficient catalyst, this reaction occurred at higher potential, called overpotential. A good HER catalyst is needed to lower the overpotential and hence to …

Elucidation Of Active Sites For The Reaction Of Ethanol On Tio2/Au(111), David T. Boyle

Senior Honors Projects, 2010-2019

Obtaining a molecular-level understanding of the reaction of alcohols with heterogeneous model catalysts is critical for improving industrial catalytic processes, such as the production of H₂ from alcohols. Gold has been shown to be an excellent oxidation catalyst once oxygen is added to it. The use of reducible oxides provides a source of oxygen on Au(111) for the reaction of ethanol, which is easily regenerated in the presence of an oxygen background. In this work, ethanol operates as a probe molecule to investigate the role of Au(111), TiO₂ nanoparticles, and TiO₂/Auinterfacial surface sites on the catalytic …

Real Time Monitoring Of Photocatalysis: An Application And Expansion Of The Quartz Crystal Microbalance, Perrin Godbold

Senior Honors Projects, 2010-2019

There are many applications of photocatalytic chemistry, with hundreds of researchers investigating photocatalytic materials. Another method of investigation could aid these researchers and contribute significantly to this field. This study attempts to develop a new method of analysis by expanding the capabilities of the Quartz Crystal Microbalance (QCM) into the realm of photocatalysis. We coated QCM crystals with the stable and well-known photocatalyst, titanium dioxide, and utilized these coated crystals to begin to develop an analysis procedure for our modified instrument. Some indication of the QCM’s sensitivity was seen, but the UV irradiation elicited a frequency change independent of the …

Ion-Specific Ice Recrystallization Provides A Facile Approach For The Fabrication Of Porous Materials, Shuwang Wu, Chongqin Zhu, Zhiyuan He, Han Xue, Qingrui Fan, Yanlin Song, Joseph S. Francisco, Xiao Cheng Zeng, Jianjun Wang

Xiao Cheng Zeng Publications

Ice recrystallization is of great importance to both fundamental research and practical applications, however understanding and controlling ice recrystallization processes remains challenging. Here, we report the discovery of an ion-specific effect on ice recrystallization. By simply changing the initial type and concentration of ions in an aqueous solution, the size of ice grains after recrystallization can be tuned from 27.4±4.1 to 277.5±30.9 mm. Molecular dynamics simulations show that the ability of the ion to be incorporated into the ice phase plays a key role in the ultimate size of the ice grains after recrystallization. Moreover, by using recrystallized ice crystals …

Silver Nanoparticles As A Potential Solar Absorber, Benjamin Hardy

Honors Projects

This work reports the development of Silver nanoparticles implanted into a polymer as a solar absorber. The plasmonic nature of silver nanoparticle allows for adjustments to be made in its UV-VIS-NIR absorbance spectrum. A combination of different sized/shaped particles could result in ideal absorption of the majority of the solar spectrum. Allotting this with the stability of a polymer leads to potential solids or solutions that could work as a solar absorber. Tests were also performed to determine whether or not UV-C irradiation during synthesis effects the characteristics of silver nanoparticles, in particular the absorbance. Successful synthesis of silver nanoparticle …

29si Nmr And Saxs Investigation Of The Hybrid Organic-Inorganic Glasses Obtained By Consolidation Of The Melting Gels, Andrei Jitianu, Sylvian Cadars, Fan Zhang, Gabriela Rodriguez, Quentin Picard, Mario Aparicio, Jadra Mosa, Lisa C. Klein

Publications and Research

This study is focused on structural characterization of hybrid glasses obtained by consolidation of melting gels. The melting gels were prepared in molar ratios of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) of 75%MTES-25%DMDES and 65%MTES-35%DMDES. Following consolidation, the hybrid glasses were characterized using Raman, ²⁹Si and ¹³C Nuclear Magnetic Resonance (NMR) spectroscopies, synchrotron Small Angle X-Ray Scattering (SAXS) and scanning electron microscopy (SEM). Raman spectroscopy revealed the presence of Si–C bonds in the hybrid glasses and 8-membered ring structures in the Si–O–Si network. Qualitative NMR spectroscopy identified the main molecular species, while quantitative NMR data showed that the ratio …

Synthesis Of A Thermally Reversible Cross-Linked System Using Electrophilic Cleavage/Functionalization Of Poly(Isobutylene-Co-Isoprene), Savannah H. Steadman

Honors Theses

Multifunctional polyisobutylenes (PIBs) are of great academic and commercial interest. Current methods to create these materials currently utilize prohibitively expensive synthetic strategies. Recently, Storey et al. reported a novel method for the synthesis of multifunctional PIB which is more commercially viable than the current methods. For this research, the material produced via this technique was utilized to create a thermally reversible crosslinked system using Diels-Alder chemistry. To achieve this, a bromide-functional polyisobutylene obtained via electrophilic cleavage and functionalization of butyl rubber was split into two portions and further functionalized. The first portion of the bromide-functional PIB was reacted with furfuryl …