Materials Chemistry Commons^™

Nano/Submicro-Structured Iron Cobalt Oxides Based Materials For Energy Storage Application, Hongyan Gao

Masters Theses & Specialist Projects

Supercapacitors, as promising energy storage devices, have been of interest for their long lifespan compared to secondary batteries, high capacitance and excellent reliability compared to conventional dielectric capacitors. Transition metal oxides can be applied as the electrode materials for pseudocapacitors and offer a much higher specific capacitance. Co3O4 is one of the most investigated transition metal oxides for supercapacitor. Besides simple monometallic oxides, bimetallic transition oxides have recently drawn growing attention in electrochemical energy storage. They present many unique properties such as achievable oxidation states, high electrical conductivities because of the coexistence of two different cations in a single crystal …

Feni2se4–Reduced Graphene Oxide Nanocomposite: Enhancing Bifunctional Electrocatalytic Activity For Oxygen Evolution And Reduction Through Synergistic Effects, Siddesh Umapathi, Jahangir Masud, Abdurazag T. Swesi, Manashi Nath

Chemistry Faculty Research & Creative Works

Water splitting reaction using earth-abundant and environmentally benign catalysts is critical for renewable energy generation and storage. Herein a hybrid composite, FeNi₂Se₄ nanoparticles supported on nitrogen doped reduced graphene oxide (FeNi₂Se₄–NrGO) is reported as an efficient and dependable bifunctional electrocatalyst for oxygen evolution and oxygen reduction reactions (OER and ORR, respectively) under alkaline conditions. While FeNi₂Se₄ nanoparticles themselves show good catalytic activity for water oxidation, the constructed hybrid nanocomposite with NrGO as the supporting matrix show enhanced catalytic activity with a small overpotential of 170 mV @ 10 mA cm …

Toxic Gas Sensing On Nanoporous Carbons, Nikolina-Eleni Travlou

Dissertations, Theses, and Capstone Projects

Activated carbons, either synthetic, developed in our laboratory, or commercial, were prepared or further modified, in order to introduce specific heteroatoms such as oxygen, nitrogen and sulfur to their matrices. Chips coated with thin layers of the carbon samples were used for the sensing of gaseous ammonia. They were exposed to continuous cycles of various ammonia concentrations (10-500 ppm), and changes in normalized resistance were analyzed. In all cases linear responses were recorded and the chips reached sensitivities as high as 31%, which are comparable to those of modified graphene-based sensors. The applied specific surface chemical modifications were an effective …

Distinct Ice Patterns On Solid Surfaces With Various Wettabilities, Jie Liu, Chongqin Zhu, Kai Liu, Ying Jiang, Yanlin Song, Joseph S. Francisco, Xiao Cheng Zeng, Jianjun Wang

Xiao Cheng Zeng Publications

No relationship has been established between surface wettability and ice growth patterns, although ice often forms on top of solid surfaces. Here, we report experimental observations obtained using a process specially designed to avoid the influence of nucleation and describe the wettability-dependent ice morphology on solid surfaces under atmospheric conditions and the discovery of two growth modes of ice crystals: along-surface and off-surface growth modes. Using atomistic molecular dynamics simulation analysis, we show that these distinct ice growth phenomena are attributable to the presence (or absence) of bilayer ice on solid surfaces with different wettability; that is, the formation of …

Optical Studies Of The Solution Phase Reduction And Stabilization Of Indigo Tetrasulfonate In Polyelectrolyte Complexes, Becca Hoene, Dion Rivera

All Faculty Scholarship for the College of the Sciences

Ultraviolet-visible (UV-vis) and fluorescence spectroscopy have been used to characterize the polyelectrolyte complexes (PECs) formed when potassium indigo tetrasulfonate (ITS) interacts with poly diallydimethylammonium chloride (PDADMAC) through columbic attraction in the presence of the reducing agent sodium bisulfite, NaHSO3. The PDADMAC facilitates both the reduction of the ITS and the stabilization of the reduced state of the ITS in an atmospheric oxygen environment. Dilutions of the dye solution show that the PEC is stable to dilutions of at least 1 to 1000. UV–vis studies indicate that the reduced ITS (ITSred) forms what is likely a J-aggregate in the presence of …

Heterojunction Engineering For Next Generation Hybrid Ii-Vi Materials, Thor Garcia

Dissertations, Theses, and Capstone Projects

Molecular Beam Epitaxy(MBE) is a versatile thin film growth technique with monolayer control of crystallization. The flexibility and precision afforded by the technique allows for unique control of interfaces and electronic structure of the films grown. This facilitates the realization of novel devices and structures within a research environment normally only achieved though complex industrial processes. In the past, the control of each interface in MBE has been explored to great benefit. In this work, we study the control of these interfaces so as to increase the performance of novel devices material systems. This dissertation focuses on two main areas …

Density Functional Investigation On Cathode/Electrolyte Interface In Solid-State Lithium Batteries, Xuelong Wang, Ruijuan Xiao, Yong Xiang, Hong Li, Liquan Chen

Journal of Electrochemistry

The rapidly expanding application of lithium ion batteries stimulates research interest on energy storage devices with higher energy density, better safety and faster charge/discharge speed. All-solid-state lithium batteries have been considered as promising candidates because of their fewer side reactions and better safety compared with conventional lithium-ion batteries with organic liquid electrolytes. Looking for well-matched electrode/electrolyte interfaces is one of the keys to ensuring good comprehensive performance of solid-state lithium batteries. In this report, with the aid of first-principles simulations, the local structure and lithium ions transportation properties of electrolyte surfaces and cathode/electrolyte interfaces are investigated. The β-Li₃PS …

Effects Of Surface Modification Modes On Proton-Over-Vanadium Ion Selectivity Of Nafion®Membrane For Application In Vanadium Redox Flow Battery, Qing-Long Tan, Hai-Ning Wang, Shan-Fu Lu, Da-Wei Liang, Chun-Xiao Wu, Yan Xiang

Journal of Electrochemistry

The effect of surface modification modes on proton-over-vanadium ion selectivity was studied by spin-coating chitosan-Phosphotungstic Acid (PWA) as a single or double layer on Nafion membrane surface. To suppress the vanadium ions permeation through the Nafion? membrane in a vanadium redox flow battery (VRFB), the single surface-modified Nafion membrane (Nafion/chitosan-PWA)S and double surface-modified Nafion membrane (Nafion/chitosan-PWA)D demonstrated a 89.9% and 92.7% reduction of vanadium ion permeability in comparison with pristine Nafion, respectively. The (Nafion/chitosan-PWA)D exhibited betterhigher selectivity between proton and vanadium ions than the (Nafion/chitosan-PWA)S at the same layer thickness. Furthermore, the columbic efficiency for the VRFB single cell based …

Tetrabutylammonium Hexafluorophosphate As Flame Retardant Additive For Lithium Ion Batteries, Qing Zhao, Qian Zhang, Jing-Min Fan, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

Safety issues have been attracted more and more attentions due to the wide applications of lithium ion batteries. Introducing flame retardant additives are one of the effective strategies to improve the safety of lithium-ion batteries. In this paper, the tetrabutylammonium hexafluorophosphate (TBAPF₆) as a flame retardant additive was added to the electrolyte as a flame retardant additive to enhance the safety of lithium ion batteries. The self-extinguishing time (SET) and ionic conductivities of the electrolytes with different TBAPF₆ contents were investigated. It is found that TBAPF6 dramatically reduced the flammability of the electrolyte while slightly decreasing ionic …

Electrochemical Performance Of Sodium Difluoro(Oxalato)Borate As The Additive Of Non-Aqueous Electrolytes For Sodium-Ion Batteries, Ding Zhang, Qin Zhu, Ying Wang, Cheng-Long Zhao, Shi-Bin Liu, Shou-Dong Xu

Journal of Electrochemistry

Sodium ion battery has attracted worldwide and intensive attention recently, while the adoption of electrolyte additives has been considered as one effective strategy to promote the cell performance. Within this work sodium difluoro(oxalato)borate (NaDFOB) was prepared and adopted as an additive for the general non-aqueous electrolyte formula of 1 mol·L-1 NaClO4/EC/PC (Vol: Vol=1:1), and the effects of the additive concentration on ionic conductivity and oxidization decomposition voltage were investigated in detail. In addition, the cell performance evaluated by NaNi0.5Mn0.5O2 as the cathode was also studied. It reveals that the addition of NaDFOB into the NaClO4/EC/PC electrolyte resulted in the significantly …

Surface Chemical Properties Of Mo2C, W2C, Mo2N And W2N Probed With Co, Co2 And O2 Adsorption: A Dft Analysis, Jingyun Ye, Tianyu Zhang, Lingyun Xu, Shuxia Yin, Krishanthi Weerasinghe, Pamela Ubaldo, Ping He, Qingfeng Ge

Journal of Electrochemistry

Transition metal carbides and nitrides are attractive materials for electrodes in many electrochemical energy storage and conversion applications. In the present study, we use density functional theory slab calculations to characterize the surface chemical properties of molybdenum (Mo) and tungsten (W) carbides and nitrides, namely, Mo₂C, W₂C, Mo₂N and W2N with the adsorption of CO, CO₂ and O₂. These probing molecules provide measures of in both acidity/basicity and redox property of for the surfaces of these carbides and nitrides. Our results show that Lewis basic sites were responsible for CO_{2 …}

An Electrochemical Dissolution Study Of Ilmenite Fraction Of Beach Sand In Sulphuric Acid Solution, Rostom Ali M., K. Biswas R., Golam Zakaria Md.

Journal of Electrochemistry

Electrochemical techniques have been used to investigate the dissolution behaviors of ilmenite fraction of beach sand of Bangladesh in sulfuric acid solutions at various temperatures. It is seen from the cyclic voltammetric studies indicated that the dissolution of ilmenite is was very difficult without the addition of carbon powder in ilmenite. The effects of ilmenite-carbon ratio, acid concentration and temperature on cyclic voltammograms have been investigated to understand the dissolution process of ilmenite. The investigated results showed that the dissolution rate of ilmenite (FeTiO₃) is was slow at low applied reduction potentials and temperatures. However, the dissolution rate …

Thermo-Stability And Active Site Structure Of Fe/N/C Electrocatalyst For Oxygen Reduction Reaction, Chi Chen, Yu-Jiao Lai, Zhi-You Zhou, Xin-Sheng Zhang, Shi-Gang Sun

Journal of Electrochemistry

The development of Fe/N/C electrocatalyst for oxygen reduction reaction (ORR) is vital for the large-scale applications of proton exchange membrane fuel cells. Understanding the active site structure will contribute to the rational design of highly active catalysts. In this study, the as-prepared Fe/N/C catalyst based on poly-m-phenylenediamine (PmPDA-FeN_x/C) catalyst with the high ORR activity was subjected to the high-temperature heat treatment again at 1000 ~1500 ^oC. The degradation of in the ORR activity of PmPDA-FeN_x/C by with various heat treatments was correlated to the change of elemental compositions, chemical states and textural properties. As the …

Electric Current Induced Flow And Electrocapillary Deformation Of Liquid Wood Alloy In Naoh Aqueous Solution, Guo-Di Zhang, Qiao-Li Lin, Jian-Hong Cheng, Rui Cao

Journal of Electrochemistry

The phenomena of the electric current induced flow and electrocapillary deformation for a liquid Wood alloy in a NaOH electrolyte were studied. Electrocapillary behaviors for the liquid Wood alloy in NaOH electrolytes by applying external low voltages were investigated. The electrode reaction (redox reaction) induced the formation or removing removal of an oxide film, and further caused the drop deformation by decreasing or increasing an interfacial tension. The same polar charge in the electric double layer would also decrease the interfacial tension. In order to maintain the stability of system, the contact area of the interface would be expanded, and …

An Investigation Of The Synergistic Effect Between (1,3-Dioxolan-2-Ylmethyl)Triphenylphosphonium Bromide And Iodide Ion For The Corrosion Inhibition Of Zinc In Citric Acid, Saadawy M.

Journal of Electrochemistry

The effect of (1,3-Dioxolan-2-ylmethyl)-triphenylphosphonium bromide (DTPB) on the zinc corrosion in 0.5 mol·L^-1 citric acid solution was investigated at 30 ^oC using weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. An ecofriendly bath was used for acid cleaning of zinc, which has not been widely used in literatures. The results showed that DTPB could serve as an effective inhibitor for the zinc corrosion in a citric acid solution with the inhibition efficiency of 98.9% at the DTPB concentration of 3×10^-3 mol·L^-1. A synergistic effect between DTPB and potassium iodide (KI) enhanced the inhibition …

A New Type Carbon Composited Molybdenum Doped Vanadium Oxide Nanowires As A Cathode Material For Sodium Ion Batteries, Guang-Rui Zhang, Li-Qiang Hu, Bao-Zhu Zhang

Journal of Electrochemistry

In recent years, the development of lithium ion batteries (LIBs) has been limited due to the insufficient lithium resource and increasing cost. As a promising candidate, sodium ion batteries (SIBs) with the similar electrochemical mechanism and lower cost than LIBs are developing rapidly. However, as a result of the larger radius of Na⁺ compared with Li⁺, the crystalline structures of the most electrode materials are damaged severely during the intercalation of Na⁺, which limits the electrochemical properties of SIBs. Thus, developing new types of electrode materials for SIBs is particularly important. Among the cathode materials, …

Influence Of Typical Anions In Seawater Environments On Corrosion Behaviors Of 5083 Aluminum Alloy, Yang-Fan Tu, Li-Ming Feng, Zhi-Gang Fang, Hai-Tao Liu, Ming-Hua Jing, Yong Guan

Journal of Electrochemistry

The interaction effects of typical anions, namely, Cl^-, HCO₃^- and SO₄^2-, presented in seawater environments on corrosion resistance behaviors of AA5083 aluminum alloy have been studied. The corrosion resistances of the 5083 aluminum alloy in different simulated seawater environments were tested by factorial analysis method. The polarization curves, the corrosion potentials, corrosion current densities and the breakdown potentials were examined in different concentrations of Cl^-, HCO₃^- and SO₄^2-.The corrosion behavior was analyzed by electrochemical impedance spectroscopy (EIS). The results showed that both Cl^-,  and …

Effects Of Temperature On The Nucleation And Growth Mechanism Of Pbo2 Electrodeposition, Lei Wang, Juan-Qin Xue, Li-Hua Yu, Chang-Bin Tang, Qiang Bi

Journal of Electrochemistry

In order to investigate the effects of temperature on the nucleation and growth of lead dioxide (PbO₂), the in situ electrochemical depositions of PbO₂ were carried out on the glassy carbon electrode at different temperatures, namely, 25℃,35℃, 45℃, 55℃, and 65℃.The cyclic voltammetric curves, the time-current and the time-potential curves,SEM images and XRD patterns of the PbO₂ coatings deposited at different temperatures were obtained. The results showed that the PbO₂ underwent nucleation and grew at different temperatures. The 3D continuous nucleation mode of PbO₂ electrodeposition remained unchanged with the increase of temperature. However, the …

Nonlinear Oscillatory Dynamics Of The Hardening Of Calcium Phosphate Bone Cements, Vuk Uskoković, Julietta V. Rau

Pharmacy Faculty Articles and Research

Here we report on the nonlinear, oscillatory dynamics detected in the evolution of phase composition during the setting of different calcium phosphate cements, two of which evolved toward brushite and one toward hydroxyapatite as the final product. Whereas both brushite-forming cements contained iondoped b-tricalcium phosphate as the initial phase, the zinc-containing one yielded scholzite as an additional phase during setting and the oscillations between these two products were pronounced throughout the entire 80 h setting period, long after the hardening processes was over from the mechanical standpoint. Oscillations in the copper-containing system involved the amount of brushite as the main …

Synthesis Of Healable Organic Semiconductor Through Dioxaborolane Bond, Junchen Liu, William W. Mcnutt, Jianguo Mei

The Summer Undergraduate Research Fellowship (SURF) Symposium

The field of organic semiconductors have gained enormous attention the past few decades. Organic materials offer numerous advantages over their inorganic counterparts. Recently a number of works have demonstrated organic semiconductors with healable properties. We aim to investigate the healable ability of an organic semiconductor by mimicking a vitrimer system through the reversible dioxaborolane bond. Vitrimers are polymers with reversible crosslink system. It has been reported that the use of the borane-oxygen bond as the crosslink showed good mechanical performance. The electrical properties will be inspected for the vitrimer-like polymer. In this report we describe a Diketopyrrolopyrrole base polymer incorporating …

How Strongly Do Oysters Stick?, Nicolás M. Morato, Andrés M. Tibabuzo, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Biological adhesives are a type of interfacial material that has incredible potential to generate new biomimetic compounds that can replace current strong, but toxic, adhesives. Therefore, a study of the chemical composition and mechanical properties of those bio-adhesives is necessary. However, in the case of oysters, despite known chemical characterization of the adult’s adhesive, there are almost no studies on its mechanical properties. Furthermore, there is no available information on the adhesive properties of spat (oysters in their larvae state). Herein, we present the first mechanical characterization of the spat adhesive, measuring its adhesion strength by hydrodynamic determination using a …

Temperature-Dependent Exciton Dynamics Of Superacid Treatment In Monolayers Of The Metal Dichalcogenide Mos2, Mingwei Zhou, Long Yuan, Jordan Snaider, Libai Huang

The Summer Undergraduate Research Fellowship (SURF) Symposium

To improve optoelectronic semiconductor materials, one of the most efficient research areas is the two-dimensional (2D) transition-metal dichalocogenides (TMDCs). It has been shown that organic nonoxidizing superacid bis(trifluoromethane)sulfonamide (TFSI) treatment of molybdenum disulfide (MoS₂) monolayer could uniformly enhance its photoluminescence by more than two orders of magnitude and also extend the lifetime of excitons. This could greatly improve the efficiency of the solar energy usage, but the mechanism behind it has not been fully understood. Extreme low temperatures (approximately 7K), which slow the surface exciton mobility, were applied to investigate the changes of treated MoS₂ monolayer surfaces. …

Usage Of Fomblin Y To Improve Water Repellence Of Surface Coatings, Shawn Pj Kirby, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Fluoro-Decyl POSS (FDP) has shown strong potential as a water repellant surface coating. Additionally, Fomblin is a solvent believed to have the ability to control the crystallization of POSS compounds on surfaces. Controlling the crystallization is key to improving water repelling abilities of surfaces. Thus, dip coating FDP and Fomblin onto surfaces is being investigated for water repulsion, mechanical stability, and deposition feasibility. First, temperature dependence of solubility of Fluoro-Decyl POSS in Fomblin was tested using Dynamic Light Scattering. Relative water repelling abilities of different coatings were determined by measuring contact angle of surfaces with water. Coatings with and without …

Comparative Solubility Of Poss Compounds In Fomblin Y, Shawn Pj Kirby, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Fluoro-Decyl POSS (FDP) has shown strong potential as a water repellant surface coating. Additionally, Fomblin is a solvent believed to have the ability to control the crystallization of POSS compounds on surfaces. Controlling the crystallization is key to improving water repelling abilities of surfaces. Thus, dip coating FDP and Fomblin onto surfaces is being investigated for water repulsion, mechanical stability, and deposition feasibility. However, in order for this to be successful, POSS must be soluble in Fomblin. Temperature dependence of solubility of Fluoro-Hexyl, Fluoro-Octyl, Fluoro-Decyl POSS in Fomblin was tested using Dynamic Light Scattering. The values were compared, and it …

Cellulose Reinforced Thermoplastic Composites By In-Situ Ring-Opening Polymerization, Shahab Kashani Rahimi

Dissertations

Over the past two decades, the increasing concern about the negative environmental impacts of synthetic materials has led to rising interests in utilizing renewable natural resources to develop polymer materials with comparable properties and performance to their synthetic counterparts. One of the major fields of interest is polymer composites where the replacement of synthetic fibers with bio renewable natural fibers is of great potential. However, the processing difficulties, in terms of fiber dispersion and thermal stability have limited the application of cellulosic fibers to polymers with low processing temperatures which are mostly hydrophobic polymers. As a result, the true reinforcing …

Anodic Nanocatalysts For Formic Acid Fuel Cells: An Electrochemical Study, Tamanna F. Shanta Mcfarland

Dissertations

Direct formic acid fuel cells (DFAFCs) have been reported as a prominent source of alternative green energy and solution to imminent energy crisis for the last two decades. The challenge to commercialize DFAFCs is primarily the utilization of cost effective, high performance and durable anodic catalyst for formic acid oxidation (FAO). Consequently, this dissertation addresses the extensive electrochemical study of a number of nanomaterials towards the potential use as electrocatalysts for FAO. Morphology and elemental analyses of the prepared nanomaterials were obtained using electron microscopy techniques.

After a general introduction and overall review of this dissertation (Chapter I), studies of …

Transient Absorption Studies Of Cdse Nanocluster Passivated With Phenyldithiocarbamate Ligands., Yizhou Xie

Electronic Theses and Dissertations

Semiconductor nanocluster (SCNC) research is a rapidly growing field driven by the promising fact that properties of such materials can be tailored by modifying their size, shape, and structure. Combination of nanocluster and organic ligands provides even wider possibilities of design and development of effective and task-specific nanostructures. Understanding of and, eventually, control of energetics, interfacial interaction, and photoinduced processes in such highly heterogeneous structures is critical to invention of novel materials including those in photovoltaic devices. In the newly established Ultrafast Laser Facility (ULF), transient absorption pump-probe spectroscopy (TAPPS) has been employed to investigate the electron transfer (ET) and …

Controlled Electrochemical Synthesis Of Single One-Dimensional Metal Nanochains Across Microgap Electrodes., Amareshwari Konutham

Electronic Theses and Dissertations

This study mainly focuses on the fabrication of single one dimensional (1D) NP chains across the 5-micron gap of Au two electrode devices (TED). This has been achieved by electrochemical deposition of Ag onto the two electrodes, soaking the TED in 0.1 M Cetyltrimethyl ammonium bromide for 2-3 hours, and then close monitoring of the current as a function of time while a voltage across the two Ag coated Au electrodes in air. One dimensional Ag nanoparticle chain formation occurred by oxidation of Ag to Ag⁺ at the positive electrode followed by movement of Ag⁺ ions to the …

Water-Soluble Pd And Pd-Alloy Nanoparticles As Catalysts In Biphasic Solvent., Shekhar Bhama

Electronic Theses and Dissertations

This dissertation shows the chemical synthesis of Pd and Pd-alloy nanoparticles (NPs) and their hydrogen and thermal stabilities for applications in the homogeneous and pseudo-homogeneous catalysis of organic reactions. Mainly, this dissertation describes 1) the chemical synthesis of Pd, PdPt, PdAu and Cu-Pd core-shell NPs coated with various organic ligands (thiols, amines and citrate), with different metal compositions in different synthetic environment, 2) the stability of solutions containing various NPs in the presence of hydrogen or varying temperatures, 3) the evaluation of the catalytic activity of Pd, PdPt, PdAu and CuPd NPs for hydrogenation/isomerization of allylic alcohols, and 4) the …

Synthesis,Structure And Properties Of Ruthenium Polypyridyl Metalloligand Based Metal-Organic Frameworks, Mamatha Polapally

Masters Theses & Specialist Projects

Metal-organic frameworks (MOFs) have been extensively studied because of their amazing applications in gas storage, purification, photocatalysis, chemical sensing, and imaging techniques. Ruthenium polypyridyl complexes have been broadly considered as photosensitizers for the conversion of solar energy and photoelectronic materials. With this aspect, we have synthesized three new ruthenium polypyridyl based MOFs ([Ru(H2bpc)Cu(bpc)(Hbpc)2(H2O)]·5H2O (1), [Ru(H2bpc)(Fe(bpc)(Hbpc)2(H2O)2]·6H2O (2) and [Ru(H2bpc)Ni(bpc)(Hbpc)2(H2O)2]·6H2O (3)) from ruthenium(III) chloride, bpc (2,2’- bipyridine-4,4’-dicarboxylic acid) ligand, and 3d M(II) metal ions (M(II)= Cu(II), Fe(II), Ni(II)). These MOFs were synthesized under hydro or solvothermal conditions by using water, ethanol or methanol as solvents. The crystal structures of the new compounds …