Materials Chemistry Commons^™

Energetic Effects Of Hole Transporting Materials On The Performance Of Organometal Halide Perovskite Photovoltaic Cells, So Min Park

Theses and Dissertations--Chemistry

Efficient, inexpensive, lightweight and flexible solar cells are desired to help meet the world’s growing energy needs. Organometal halide perovskite (OMHP) photovoltaic (PV) cells have shown dramatic increases in solar cell efficiencies increase over the last 5 years. OMHP PV cells have attracted significant attention due to their broad absorption spectra, high electron and hole mobility, and low production cost. The interface between hole transporting layer (HTL) and perovskite thin films have a significant influence on charge transfer and overall solar cell performance. 2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)9,9’-spirobifluorene (Spiro-OMeTAD) is a small molecule largely used as HTL in perovskite solar cells. However, this material …

Biomimetic Devices To Drive A Thermodynamically Uphill Reaction Using Light And To Degrade Industrial Waste Stream Components, Madison Joanne Sloan

Theses and Dissertations--Chemistry

Given the amount of industrial waste produced each year, as well as the accruing amount of greenhouse gases in our atmosphere produced by the burning of fossil fuels, it is imperative that humanity develop environmentally-sustainable sources of energy and methods of remediation. Nature achieves both of these by use of enzymes as catalysts, inspiring interest in designing biomimetic systems capable of harnessing clean energy and remediating industrial waste. This study examined the ability of enzymes in electrochemical and convective flow systems to achieve these tasks. The first portion studied the incorporation of enzymes into an electrochemical system to drive the …

Heterogeneous Base Metal Catalyzed Oxidative Depolymerization Of Lignin And Lignin Model Compounds, John Adam Jennings

Theses and Dissertations--Chemistry

With the dwindling availability of petroleum, focus has shifted to renewable energy sources such as lignocellulosic biomass. Lignocellulosic biomass is composed of three main constituents, lignin, cellulose and hemicellulose. Due to the low value of cellulosic ethanol, utilization of the lignin component is necessary for the realization of an economically sustainable biorefinery model. Once depolymerized, lignin has the potential to replace petroleum-derived molecules used as bulk and specialty aromatic chemicals. Numerous lignin depolymerization strategies focus on cleavage of β-aryl ether linkages, usually at high temperatures and under reductive conditions.

Alternatively, selective benzylic oxidation strategies have recently been explored for …

Characterization And Application Of Hybrid Nanostructures For Enhanced Biological Imaging Using Fluorescence Microscopy Techniques, William E. Martin

Theses and Dissertations--Chemistry

Fluorescence microscopy is a powerful tool for interpreting the structure and function of biomolecules, and their interactions with one another. Understanding fundamental biological mechanisms is important to the development of improved treatments for a variety of diseases. Fluorescent tags are used to track the motion and longevity of such events, with the ability to monitor several biomolecules at once. Currently, many of these studies are conducted using bulk measurements, or several biological events at the same time, because the added light from several emitters can more easily overcome the high fluorescence background inherent to biological systems. Although important in their …

Interactions Of Compounds Containing Group 12 And 16 Elements, Daniel Burriss

Theses and Dissertations--Chemistry

The focus of this dissertation is on the interactions of compounds containing group 12 and 16 elements. This work is presented in three major parts. First, the interaction of the synthetic dithiol N,N’-bis(2-mercaptoethyl)isophthalamide), abbreviated BDTH₂, with selenite. Second, the interaction of cysteine with Cd(II) and the biologically relevant Cd-Cysteine crystal structure. Third, the green synthesis of CdSe quantum dots (QDs).

The interaction of BDTH₂ with selenite is different from the interactions with other metals and metalloids previously studied. Under ambient conditions, BDTH₂ is oxidized to the disulfide, BDT(S-S), while selenite is reduced to elemental selenium. However, …

Charge Transport In Electronic-Ionic Composites, Long Zhang

Theses and Dissertations--Chemical and Materials Engineering

The goal of this thesis is to generate fundamental understandings of charge transport behaviors of composites consisting of garnet structured Al substituted Li₇La₃Zr₂O₁₂ (LLZO) electrolyte and LiCoO₂ electrode. In order to take full advantage of all-solid-state batteries, bulk type composite electrodes should be introduced to increase energy and power density. However, the charge utilization of bulk type composite electrodes is quite low. Understanding ionic conduction behavior is, therefore, important for improving the performance of all-solid-state batteries, because ion conduction within solids depends on effective pathways. Electronic conductivity can be easily compensated by …

Photoluminescence Mechanism And Applications Of Graphene Quantum Dots, Yiyang Liu

Theses and Dissertations--Chemistry

Graphene quantum dots (GQDs) are small pieces of graphene oxide whose physical dimensions are so confined (a few to a few tens nm) that they have a finite bandgap due to a quantum confinement effect. The finite bandgap of GQDs grants them pronounced absorption bands and a substantial photoluminescence. These optical properties are rarely observed in traditional carbon materials, since most of carbon materials are metallic with a near-zero bandgap and thus have broad absorption spectra with no photoluminescence. The unique optical properties of GQDs, along with GQDs’ inherited advantages from carbon material family (cheap, abundant, non-toxic), make GQDs an …

Arsenic Removal With A Dithiol Ligand Supported On Magnetic Nanoparticles, John Hamilton Walrod Ii

Theses and Dissertations--Chemistry

Exposure to arsenic (As) in water, the ubiquitous toxin that poses adverse health risks to tens of millions, is the result of both anthropogenic and geochemical mobilization. Despite recent publicity and an increased public awareness, the dangers associated with arsenic exposure rank among the top priorities of public health agencies globally. Existing sequestration applications mainly include reductions and adsorption with zero-valent metals and their oxides. The performance of adsorption media is known to preferentially favor aqueous As(V) over As(III) due to the charge of the dissolved oxyanion. Magnetic nanoparticles (MNP) have been the focus of multidisciplinary research efforts for the …

Exploring The Structure And Properties Of Nanomaterials Using Advanced Electron Microscopy Techniques, Yao-Jen Chang

Theses and Dissertations--Chemistry

Nowadays people are relying on all kinds of electronic devices in their daily life. All these devices are getting smaller and lighter with longer battery life due to the improvement of nanotechnology and materials sciences. Electron microscopy (EM) plays a vital role in the evolution of materials characterization which shapes the technology in today’s life. In electron microscopy, electron beam is used as the illumination source instead of visible light used in traditional optical microscopy, the wavelength of an electron is about 10⁵ times shorter than visible light. By taking this advantage, the resolving power and magnification are greatly …

Acenes, Heteroacenes And Analogous Molecules For Organic Photovoltaic And Field Effect Transistor Applications, Devin B. Granger

Theses and Dissertations--Chemistry

Polycyclic aromatic hydrocarbons composed of benzenoid rings fused in a linear fashion comprise the class of compounds known as acenes. The structures containing three to six ring fusions are brightly colored and possess band gaps and charge transport efficiencies sufficient for semiconductor applications. These molecules have been investigated throughout the past several decades to assess their optoelectronic properties. The absorption, emission and charge transport properties of this series of molecules has been studied extensively to elucidate structure-property relationships. A wide variety of analogous molecules, incorporating heterocycles in place of benzenoid rings, demonstrate similar properties to the parent compounds and have …

Deconvolving The Steps To Control Morphology, Composition, And Structure, In The Synthesis Of High-Aspect-Ratio Metal Oxide Nanomaterials, Lei Yu

Theses and Dissertations--Chemistry

Metal oxides are of interest not only because of their huge abundance but also for their many applications such as for electrocatalysts, gas sensors, diodes, solar cells and lithium ion batteries (LIBs). Nano-sized metal oxides are especially desirable since they have larger surface-to-volume ratios advantageous for catalytic properties, and can display size and shape confinement properties such as magnetism. Thus, it is very important to explore the synthetic methods for these materials. It is essential, therefore, to understand the reaction mechanisms to create these materials, both on the nanoscale, and in real-time, to have design control of materials with desired …

Thermal Conductivities Of Organic Semiconductors, Yulong Yao

Theses and Dissertations--Physics and Astronomy

Organic semiconductors have gained a lot of interest due to their ease of processing, low-cost and inherent mechanical flexibility. Although most of the research has been on their electronic and optical properties, knowledge of the thermal properties is important in the design of electronic devices as well. Our group has used ac-calorimetric techniques to measure both in-plane and transverse thermal conductivities of a variety of organic semiconductors including small-molecule crystals and polymer blends. For layered crystals composed of molecules with planar backbones and silylethynyl (or germylethynyl) sidegroups projecting between the layers, very high interplanar thermal conductivities have been observed, presumably …

Preparation And Evaluation Techniques Of Porous Materials And Mixed Matrix Membranes For Targeted Co2 Separation Applications, Tsemre Tessema

Theses and Dissertations

The use of porous sorbents for physisorptive capture of CO₂ from gas mixtures has been deemed attractive due to the low energy penalty associated with recycling of such materials. Porous organic polymers (POPs) have emerged as promising candidates with potential in the treatment of pre- and post- fuel combustion processes to separate CO₂ from gas mixtures. Concurrently, significant advances have been made in establishing calculation methods that evaluate the practicality of porous sorbents for targeted gas separation applications. However, these methods rely on single gas adsorption isotherms without accounting for the dynamic gas mixtures encountered in real-life applications. …

Synthesis And Characterization Of Metallic Nanoparticles For Catalytic Applications, Sarah Smith

Theses and Dissertations

In recent years, research has focused on reducing the cost of catalysts in a variety of ways including using less expensive materials, improving the synthetic method, and increasing the catalytic activity, recovery, and recyclability. Typically with nanoparticles, the size, shape, composition, and surface coating have an effect on catalytic activity.^1-2 In this work, we focused on reducing the cost of precious metal based catalysts by altering the synthetic methods.

One way to lower the cost of synthesizing precious metal nanoparticles is by debasing the precious metal with a second cheaper more abundant metal. CuPd nanoparticles were synthesized in oleylamine …

Effect Of Charged Species On The Gradient Properties, Kayesh Ashraf

Theses and Dissertations

Surface chemical gradients are materials that exhibit continuous, gradually varying chemical or physical properties along and across the length of a substrate. As a result, each point on the gradient surface can represent an individual sample. They are broadly classified as chemical and physical gradients depending upon the properties that the gradient exhibits. A physical gradient involves a continuous variation of physical properties such as surface roughness and film porosity on the micrometer scale. Chemical gradients involve a gradual variation of chemical properties such as polarity, acidity and basicity, etc. Such gradients have found various applications in cell adhesion, nanoparticle …

Sol-Gel Chemistry: An Advanced Technique To Produce Macroscopic Nanostructures Of Metal And Semiconductor Colloids, Lamia Nahar

Theses and Dissertations

The fascinating physical properties that arise in materials limited to dimensions of 1-100 nm have gained noteworthy interest from the scientific community. Accordingly, there has been a lot of attention paid to the synthesis of discrete nanoparticles (NPs) and they are being investigated for a range of advanced technologies. Nonetheless, efficient use of nanomaterials in device applications require them to be assembled into solid state macro-structures while retaining their unique, nanoparticulate properties. To date, most commonly investigated assembling techniques include: covalent coupling of NPs surface groups, control evaporation of the solvent to produce ordered supercrystals or non-ordered glassy films, and …

Size And Shape Control In Metal Nanoparticles And Nanocomposites, Tomendro Subedi

Theses and Dissertations (Comprehensive)

This thesis describes major findings on the shape transformation of the precursor silver decahedral nanoparticles (AgDeNPs) with pentagonal symmetry and twin defects into silver pentagonal prism nanoparticles (AgPPNPs) using Br¯ as a shape selective reagent. Silica-encapsulation of the gold-plated AgDeNPs was also carried out forming ordered arrays of silica encapsulated gold-plated AgDeNPs (SiO₂@Au@AgDeNPs) of different sizes. At first, synthetic procedures for AgDeNPs (pentagonal bipyramids), silver pentagonal rod nanoparticles (AgPRNPs) and gold-plating of AgDeNPs (Au@AgDeNPs) were optimized. Gold plating enhances the chemical stability of AgDeNPs and preserves the superior plasmonic properties of silver. This thesis deals with the transformation …

A Density Functional Theory Study Of Intrinsically Chiral Semiconductor Nanocrystals, Richard Edwards

Theses and Dissertations (Comprehensive)

A plethora of work has been done in the area of nanoparticles of late due to the fact that chemists (and physicists) have discovered that the properties of nanoparticles differ from both those of the bulk material and the atoms themselves. Nanoparticles have become of high interest for the use as catalysts while materials like graphene, being only one atom thick, have been shown to be great electrical conductors in comparison with the 3D structure of diamond. Among these peculiar nanoscale properties is the phenomenon of nanochirality, where a nanoparticle can exhibit chirality that does not extend to the macroscale …