Materials Chemistry Commons^™

An Investigation Of The Use Of Cerium And Polyhedral Oligomeric Silsesquioxanes For The Protection Of Polymeric Epoxy Compounds In The Low Earth Orbit Environment, Jessica Miriam Piness

Dissertations

Low Earth orbit presents many hazards for composites including atomic oxygen, UV radiation, thermal cycling, micrometeoroids, and high energy protons. Atomic oxygen and vacuum ultraviolet radiation are of concern for space-bound polymeric materials as they degrade the polymers used as matrices for carbon fiber composites, which are used in satellites and space vehicles due to their high strength to weight ratios. Epoxy-amine thermosets comprise a common class of matrix due to processability and good thermal attributes. Polyhedral oligomeric silsesquioxanes (POSS) have shown the ability to reduce erosion in polyimides, polyurethanes, and other polymers when exposed to atomic oxygen. The POSS …

Influence Of Multiwall Carbon Nanotubes On Corrosion Performance And Water Hydrogen Bonding Of Epoxy-Amine Thin Films, Greg William Curtzwiler

Dissertations

This dissertation research sought to provide a fundamental basis of understanding to commence the systematic investigation of developing economically viable fully formulated epoxy-amine coating systems containing multiwall carbon nanotubes (MWCNT). Namely, a facile and rapid method for multiwall carbon nanotube surface modification and molecular structure interpretation was developed to assist in designing MWCNT-polymer interactions and achieving high levels of dispersion. Additionally, a rapid and quantitative method was developed to investigate the dispersibility potential of MWCNTs possessing a given surface modification in combination with a dispersion protocol which can further be utilized as a quality control metric in commercial applications. It …

Bioinspired Design Of Wetting And Anti-Wetting Surfaces Via Thiol-Ene Photopolymerization, Li Xiong

Dissertations

Surface wettability is known to have a profound influence in both academic study and industrial application of materials. Superhydrophobic surfaces, with a static contact angle higher than 150° and a contact angle hysteresis lower than 10°, have received continued attention for their broad applications, such as self-cleaning, antifogging and frosting, and drag reduction. The continuous development of materials and approaches that used to create superhydrophobic surfaces has led to further exploration of coatings with other desirable properties such as superamphiphobicity, mechanical robustness and thermal stability.

In this work, coatings with super wetting and super anti-wetting properties were designed and fabricated …

Effect Of Chain Rigidity On Network Architecture And Deformation Behavior Of Glassy Polymer Networks, Kyler Reser Knowles

Dissertations

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of …

Functionalized Silica Gel For Adsorption Of Cesium From Solution, Kenneth Marshall Seaton Iii

Electronic Theses and Dissertations

Mesoporous silica gel containing embedded phosphotungstic acid (PTA) was synthesized by sol-gel co-condensation of tetraethyl orthosilicate with PTA in acidic media. The obtained material had high Brunauer-Emmett-Teller Theory (BET) surface area and pore volume. A characteristic band of the Keggin structure of PTA was present in its FT-IR spectrum while its X-ray diffraction patterns were absent. This proved the embedding of PTA on a sub-molecular level and not as a second phase. Acidic sites were determined by neutralization with base in aprotic solvent, followed by titration of the remaining base with an acid. The material demonstrated high adsorption capacity of …

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Novel Composites Between Nano-Structured Nickel Sulfides And Three-Dimensional Graphene For High Performance Supercapacitors, Xiaomin Wang, Huanglin Dou, Zhen Tian, Jiujun Zhang

Journal of Electrochemistry

In this paper, a three-dimensional graphene (3DG) network grown on nickel foam was employed as a template for synthesizing graphene-based composite materials of supercapacitor electrode. The composites (crystal Ni₃S₂ nanorods on the surface of 3DG (abbreviated as Ni₃S₂/3DG)) were obtained through a one-step hydrothermal reaction. The morphological and structural evolution of the Ni₃S₂/3DG composites were investigated by SEM, TEM, XRD and Raman spectroscopy. Detailed electrochemical characterization showed that the Ni₃S₂/3DG-coated electrodes exhibited both a specific capacitance as high as 1825 F·g^-1 at 5 mV·s …

Designing Pt-Skin Of Pt-Based Bimetallic Electrocatalysts For Oxygen Reduction Reaction, Binwei Zhang, Yunxiao Wang, Yanfei Xu, Huakun Liu, Shixue Dou

Journal of Electrochemistry

In the past decade, great advancement has been made in the development of nanocatalysts for energy conversion and storage. Pt-skin of Pt-based bimetallic has shown a great potential in the tuning the electronic structures of electrocatalytically active materials toward oxygen reduction reaction. Here, we offer a brief overview of the recent research on the design and preparation of catalysts. Our focus is paid on the systematic studies of preparation and performance of Pt-skin catalysts towards oxygen reduction reaction.

Recent Progress In Template-Assisted Synthesis Of Nitrogen-Doped Porous Carbons For Oxygen Electroreduction, Wenhan Niu, Ligui Li, Shaowei Chen

Journal of Electrochemistry

Nitrogen (N)-doped porous carbons are potential alternatives to precious metal catalysts for oxygen reduction reaction (ORR) at the cathodes of proton exchange membrane fuel cells and metal-air batteries. Template-assisted synthesis has been used extensively as a robust and versatile method in the preparation of such carbon catalysts, where the ORR activity has been found to be dependent on various structural parameters, such as the concentrations and molecular configurations of the dopants, and the porosity, surface accessibility and electrical conductivity of the carbon materials. In this review, we summarize recent progress in this area of research focusing on the design, preparation …

Electrochemical Methods In Clinical Immunoassays And Nucleic Acid Analyses, Yanbing Zu

Journal of Electrochemistry

The applications of electrochemical methods in immunoassays and nucleic acid analyses are discussed. Instead of a comprehensive literature review, this paper focuses on the techniques that have already been commercialized and used in clinical diagnoses. Learning from the success of these methods will help us to further understand the strengths and limitations of electroanalytical technology. A personal perspective of the research and development in these fields has been presented.

Comparative Studies Of Fe, Ni, Co And Their Bimetallic Nanoparticles For Electrochemical Water Oxidation, Maduraiveeran Govindhan, Brennan Mao, Aicheng Chen

Journal of Electrochemistry

The design of efficient, durable, and earth-abundant electrocatalysts via environmentally compatible strategies for the oxygen evolution reaction (OER) is a vital for energy conversion processes. Herein we report a facile approach for the fabrication of low-cost and earth abundant metal catalysts, including iron (Fe), nickel (Ni), cobalt (Co), CoNi, and CoFe nanoparticles (NPs) on titanium (Ti) substrates through a one-step electrochemical deposition. Field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) spectrocopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques were employed to characterize these nanoparticles. Our electrochemical results revealed that among the five synthesized nanomaterials, the …

Impact Of Nafion Loading And Anion Adsorption On The Synthesis Of Pt Monolayer Core-Shell Catalysts, Lijun Yang, Dustin Banham, Elod Gyenge, Siyu Ye

Journal of Electrochemistry

Carbon supported palladium (Pd) nanoparticles were used as a model core material for the synthesis of platinum (Pt) monolayer core-shell catalysts using rotating disk electrode method and a copper (Cu) under potential deposition technique. The impact of Nafion on the synthesis process was revealed by electrochemical testing with various Nafion contents. The existence of Nafion influenced the Cu under potential deposition, galvanic replacement and eventually the oxygen reduction reaction activity of the core-shell catalyst. However, as long as the Nafion content was less than 5 wt% in the test film, adding Nafion could help to bind catalyst onto the surface …

Comparison Of Oxygen Reduction Reaction Activity Of Pt-Alloy Nanocubes, Yongan Tang, Lin Dai, Shouzhong Zou

Journal of Electrochemistry

Alloying Pt with the first row non-noble transition metals has been demonstrated to increase the catalytic activity toward oxygen reduction reaction (ORR), which is the cathode reaction of the proton exchange membrane fuel cells (PEMFCs) and metal-air batteries. However, how much the ORR activity improvement comes from the alloying elements remains controversial. In this paper, the nanocubes of PtMn, PtFe, PtCo, and PtNi with the similar size and composition were prepared and their ORR activities were explored, in order to investigate the effects of alloying elements on the catalytic activity. The use of cubic shape particles minimizes the contribution to …

Resistive-Pulse Analysis Of Single Phospholipid Vesicles Using Quartz Nanochannels, Jonathan T. Cox, Bo Zhang

Journal of Electrochemistry

We report the uses of resistive-pulse method and quartz nanochannels for the detection and size analysis of single vesicles. Cylindrical shape quartz nanochannels have been used to detect single phospholipid vesicles ranging from 100 to 300 nm and polystyrene nanoparticles ranging from 170 to 400 nm in diameter. Translocations of single vesicles and nanoparticle were detected as individual square current pulses, which could be used to determine particle size. Our results show excellent agreement between the particle/vesicle sizes obtained from nanochannels and those from dynamic light scattering (DLS) and scanning electron microscopy (SEM). This electronic-based method was found to be …

Electrodeposition Of Ruo2 Layers On Tio2 Nanotube Array Toward Co2 Electroreduction, Bei Jiang, Lina Zhang, Xianxian Qin, Wenbin Cai

Journal of Electrochemistry

RuO₂/TiO₂ composite materials have multitude of electrocatalytic applications including but not limited to CO₂ reduction reaction (CO₂RR). RuO₂/TiO₂ electrodes were previously prepared by repetitive coating and thermal decomposition (TD) of a Ru(III) precursor solution on Ti substrate. In this work, electrochemical potential cycling is applied to deposit amorphous RuO₂ (α-RuO₂) layers onto TiO₂ nanotube array (TNA) (RuO₂^CV/TNA) preformed on Ti foil. SEM, GIXRD, and voltammetry are applied to characterize the structures of the resulting RuO₂^CV/TNA. Ru loading on the RuO_{2 …}

Design Of 3d Macroporous Inverse Opal Tio2 Binary And Ternary Composites Sensitized With Gold Nanoparticles And Cds Quantum Dots For Photocatalysis, Daniel A. Corella

Master of Science in Chemical Sciences Theses

Materials composed of titanium (IV) oxide (TiO₂) have received enormous scientific interest due to titania’s abundance, non-toxicity, and photocatalytic proficiency, however its large band gap limits its applicability under ambient conditions. Various attempts have been made to incorporate titania into composite systems to sensitize it for activity under a broader range of wavelengths. One such method includes utilizing narrow band gap semiconductors to form an electron transfer process analogous to photosynthesis referred to as a Z-scheme. Z-scheme systems can catalyze the decomposition of aqueous pollutants via generation of reactive oxygen species after input of sunlight. This work reports …

Enediyne Derived Conjugated Polymers, Keda Hu

Chemistry and Chemical Biology ETDs

The advance of conjugated polymers (CPs) is largely relied on the development of new polymerization methods, the discovery of novel polymers that possess unique chemical and physical properties, and understanding of their structure-property relationship. We have employed a set of trans-enediynes (trans-EDYs) for the preparation of four series of CPs, polydiacetylenes (PDAs), platinum-segmented PDAs, polytriacetylenes (PTAs) and boron doped polyacetylenes (BPAs). The resulting polymers displayed interesting optical and electrochemical properties which could be fine-tuned by the attachment of various side chains on the EDY moieties. We have applied acyclic EDY metathesis for the synthesis of PDAs, a class of CPs …

Modification Of An Implant Material, Emily Leung, Nina A. Reger, Ashley Blystone, Ellen S. Gawalt Phd

Undergraduate Research and Scholarship Symposium

Titanium metal is a commonly used implant material which can be colonized by bacteria. Biofilms are formed when bacteria colonizes, attaches to a surface, and immobilizes. Bacterial infections or biofilms are hard to treat once formed on the surface of a metal implant. Coating the material may minimize bacteria attachment. Self-assembled monolayers are comprised of molecules that contain both a head and tail group, and can be used to coat metal to prevent biofilm formation and bacteria growth. 12-mercaptododecylphosphonic acid self-assembled monolayers have a phosphonic acid head group and a thiol tail group. A solution of
12-mercaptododecylphosphonic acid in tetrahydrofuran …

Catalyzed Synthesis Of Zinc Clays By Prebiotic Central Metabolites, Marcelo I. Guzman, Ruixin Zhou, Kaustuv Basu, Hyman Hartman, Christopher J. Matocha, S. Kelly Sears, Hajatollah Vali

Chemistry Faculty Publications

How primordial metabolic networks such as the reverse tricarboxylic acid (rTCA) cycle and clay mineral catalysts coevolved remains a mystery in the puzzle to understand the origin of life. While prebiotic reactions from the rTCA cycle were accomplished via photochemistry on semiconductor minerals, the synthesis of clays was demonstrated at low temperature and ambient pressure catalyzed by oxalate. Herein, the crystallization of clay minerals is catalyzed by succinate, an example of a photoproduced intermediate from central metabolism. The experiments connect the synthesis of sauconite, a model for clay minerals, to prebiotic photochemistry. We report the temperature, pH, and concentration dependence …

Synthesis, Characterization, And Properties Of Graphene-Based Hybrids With Cobalt Oxides For Electrochemical Energy Storage And Electrocatalytic Glucose Sensing, Sara C. Botero Carrizosa

Masters Theses & Specialist Projects

A library of graphene-based hybrid materials was synthesized as novel hybrid electrochemical electrodes for electrochemical energy conversion and storage devices and electrocatalytical sensing namely enzymeless glucose sensing. The materials used were supercapacitive graphene-family nanomaterials (multilayer graphene-MLG; graphene oxide-GO, chemically reduced GO-rGO and electrochemical reduced GOErGO) and pseudocapacitive nanostructured transition metal oxides including cobalt oxide polymorphs (CoO and Co3O4) and cobalt nanoparticles (CoNP). These were combined through physisorption, electrodeposition, and hydrothermal syntheses approaches. This project was carried out to enhance electrochemical performance and to develop electrocatalytic platforms by tailoring structural properties and desired interfaces. Particularly, electrodeposition and hydrothermal synthesis facilitate chemically-bridged …

Environmentally Friendly Synthesis Of Transition Metalorganic Hybrid Nanocomposites, Aubrey N. Penn

Masters Theses & Specialist Projects

Research on metal nanoparticles (MNPs) synthesis and their applications for optoelectronic devices has been a recent interest in the fields of nanoscience and nanotechnology Photovoltaics are one of such systems in which MNPs have shown to be quite useful, due to unique physical, optical, magnetic, and electronic properties, including the metal nanoparticles synthesized in this research.

Owing to the challenges with the most common physical and chemical methods of preparing MNPs, including the use of high temperatures, toxic reducing agents, and environmentally hazardous organic solvents, there is a critical need for a benign synthesis procedure for MNPs. In this work, …

Tio2/Pdms Buoyant Photocatalyst For Water Remediation And Cu‑Rbs Organic/Inorganic Hybrid For Thermoelectric Applications, John R. Bertram

Masters Theses & Specialist Projects

Two novel materials have been developed: TiO2/poly(dimethylsiloxane) (PDMS) beads as buoyant photocatalyst materials for water remediation, and copper rhodamine‑B silane (Cu‑RBS) as an n ‑type organic/inorganic hybrid for thermoelectric applications. The approach to incorporate TiO2 into low‑density PDMS beads addresses many of the challenges traditionally encountered when creating buoyant photocatalysts, an area which is crucial for wide‑spread remediation of water resources, including natural bodies of water. The performance and reusability of the buoyant photocatalyst materials, demonstrated by using methylene blue as a model degradation target, is strong enough for environmental application. The use of a kinetic model and the introduction …

Where Do New Materials Come From? Neither The Stork Nor The Birds And The Bees! In Search Of The Next “First Material”, Gregory Morrison, Dileka Abeysinghe, Justin B. Felder, Shani Egodawatte, Timothy Ferreira, Hans Conrad Zur Loye

Journal of the South Carolina Academy of Science

Materials discovery and optimization has driven the rapid technological advancements that have been observed in our lifetimes. For this advancement to continue, solid-state chemists must continue to develop new materials. Where do these new materials come from? In this review, we discuss the approaches used by the zur Loye group to discover the next “First Material”, a new material exhibiting a desired or not previously observed property that can be optimized for use in the technologies of tomorrow. Specifically, we discuss several crystal growth techniques that we have used with great success to synthesize new materials: the flux growth method, …

Cytotoxic And Antimicrobial Effects Of Silver-Containing Surfaces, Sarah Goderecci

Theses and Dissertations

This study examines applications of sputtered silver coatings as alternatives to traditional antibiotic treatments. Given the increase in reports of antibiotic-resistant bacteria, new treatments and coatings for in-dwelling medical devices such as catheters and orthopedic implants are necessary. Silver oxide films were deposited onto Ti surfaces to examine the efficacy of such coatings against a variety of bacterial species both in vitro and in vivo. Bacterial growth studies showed that coatings exhibited antimicrobial activity against a range of bacterial species acting either in a bacteriostatic or bactericidal mechanism, depending on the target. Limited toxicity to in vitro mammalian cells was …

Performance Of Piperidine Ionic Liquid Based Mixed Electrolyte In Li/Licoo2 Cell, Hu Cheng, Xiao-Yan Nie, Ye-Dan Shen

Journal of Electrochemistry

The N-methyl-N-ethyl (propyl, butyl) piperidinium bis (trifluo romethanesulfonyl) imide (PP12(3,4)TFSI) ionic liquids were prepared, and their influences on the performances of Li/LiCoO₂ cells were investigated. The electrochemical performance and thermostability of ionic liquids based mixed electrolytes were characterized by electrochemical methods and thermogravimetric analysis. The results showed that the piperidine ionic liquids could improve the thermostability of organic electrolyte, and the size of their side chain had played an important role on the electrochemical performance of Li/LiCoO₂ cell. The Li/LiCoO₂ cell used the electrolyte mixed with PP13TFSI exhibited the best electrochemical performance among the three ionic liquids. …

The Problem Of The Anode Electrolyte In H-Type Electrolytic Cell For Electrochemical Reduction Of Carbon Dioxide, Rui Zhang, Wei-Xin Lv, Li-Xu Lei

Journal of Electrochemistry

Electrochemical reduction of carbon dioxide (CO₂) was studied in the H-type electrolytic cell. It was found that the voltage between the cathode and the anode would increase during the long time electrolysis process, for this reason the electrolytic process would be unsustainable. After the experimental investigations carried out by constant potential electrolysis, constant current electrolysis, pH test and KHCO₃ concentration analysis of anode electrolyte before and after the electrolysis, the increase in cell voltage might be caused by the following process: H⁺, that was generated from the anodic oxygen evolution reaction, reacted with HCO_{3 …}

Effects Of Flame Retardant On The Rate Capability And Safety Performances Of The Soft-Package 5ah Lithium Ion Battery, Yan-Zhuo Lv, Xiao-He Wang, Yi-Ming Qin, Zhen-Bo Wang, Ke Ke

Journal of Electrochemistry

The 5 Ah soft packed lithium ion batteries with LiNi _0.4Co_0.2Mn_0.4 O₂ as the positive electrode material and the organic electrolytes with different amounts of fire retardants as the electrolyte solution were prepared. The effects of the fire retardant amount (5 %,10 %,20 %) of the fire retardants on the rate performances, short-circuit characteristics and overcharged behaviors of the 5 Ah soft packed lithium ion battery were investigated by electrochemical methods. The results indicated that the best rate performances were obtained by adding 5 vol.% of the fire retardants in the electrolyte solution when the …

Application Of Composite Ionic Liquid In Electro-Oxidation Activation Of A C-H Bond, Zi-Ying Chen, Qian-Qian Wu, Jian-Qing Zhang, Ying-Hong Zhu, Chun-An Ma

Journal of Electrochemistry

In this paper, the ionic liquid/carbon nanotube composite material was prepared through modifying the ionic liquid 1-ethyl-3-methylimidazolium acetate to multi-walled carbon nanotubes. The electro-oxidation properties of p-methoxy toluene (p-MT) were studied using the composite as an electrolyte. The effects of scanning speed, temperature and substrate concentration were studied by cyclic voltammetry and chronoamperometry. The electrochemical kinetics of p-MT in this system was also studied. The results showed that the electrochemical oxidation of p-MT in the composite electrolyte solution was irreversible. The process was mainly controlled by diffusion, and the diffusion coefficient (D) was 7.69×10-10 cm²·s^-1. Increasing …

Electrochemical Nucleation Of Invar Alloy On Glassy Carbon Electrode, Xian-Jie Huang, Hui Yan, Shuai-Shuai Huang, Fang-Zu Yang, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

The linear sweep voltammetry, cyclic voltammetry and potential step methods were used to study the electrodeposition mechanism of Invar nickel-iron alloy (the mass fraction of nickel was 32~36%) on glassy carbon electrode surface in the weak acidic bath. The results demonstrate that the electrodeposition is was a diffusion controlled irreversible electrode process in this system. The Scharifker-Hill (SH) theory theoritic model (SH) were was used employed to fitting the experimental data and the result shows that the codeposition of Invar alloy on glassy carbon electrode surface conformed to the diffusion controlled three-dimensional instantaneous nucleation mechanism. The kinetic parameters were obtained …

Electrochemical Synthesis Of Porous Polyaniline Electrodes Using Hkust-1 As A Template And Their Electrochemical Supercapacitor Property, Qiong Luan, Chun-Feng Xue, Hong-Ye Zhu, Fu-Juan Yang, Xu-Li Ma, Xiao-Gang Hao

Journal of Electrochemistry

Excellent electrode plays vital important role in the performance of supercapacitors. Polyaniline (PANI) with good conductivity is often used to prepare electrode. However, its available surface is limited and results in a poor supercapacitance in many cases. It is desirable to fabricate an electrode containing electroactive PANI with high surface area deriving from its porous structure. Here, the metal-organic framework (MOF) material with high surface area was selected as a hard template for synthesizing porous PANI. Microporous PANI composite electrodes (Micro-PANI/CC) were fabricated by depositing aniline on to carbon cloth (CC) pre-coated with MOF material of HKUST-1 using a unipolar …