Chemistry Commons^™

Comparison Of Liquid-Liquid Extraction And Solid Phase Extraction Of Mephedrone, Brittany Simone Love

Master's Theses

Legal high drugs are modified scheduled drugs. As with any new drug, researchers have to conduct studies to gather information about the drug. The problem with obtaining accurate information on new drugs is that by the time information is gathered, drug abusers and street chemists have developed new ones. Comparing designer drugs to their illegal counterparts is often helpful in that it can provide a starting point. Mephedrone is a new designer drug that has become a problem over the past few years. Often marketed as bath salts and plant food, mephedrone has become the knockoff replacement for amphetamines. This …

Direct Chain-End Functionalization Of Living Polyisobutylene With Phenoxyalkyl(Meth)Acrylates, Conor Patrick Roche

Master's Theses

This volume describes efforts toward the synthesis and employment of phenoxyalkyl (meth)acrylates, which were used to end-quench 1sobutylene polymers m1tiated from 2-chloro-2,4,4-tnmethylpentane (TMPCl), and 5-tert-butyl-1 ,3-d1(1-chlorol- methylethyl)benzene (bDCC), respectively, at -70 °C in 40/60 (v/v) hexane/methyl chlonde. The quencher/cham end molar rat10s typically ranged from 2.5-4, while the ratio of Lewis ac1d/cham end was vaned from approximately 3 5-6 In all cases, alkylation occurred exclusively at the para position of the quencher and no cham degradat10n was observed, even at high concentrations of TiC14 and long reaction times. Prellmmary qualitative studies mvolved the reaction of quenchers of varymg alkyl tether …

Growth And Carboxysome Composition Of The Csosia Pore Mutants Of Halothiobacillus Neapolitanus, Jenifer Milam

Master's Theses

Carboxysomes are specialized organelles that are filled with ribulose 1,5- bisphosphate carboxylase/oxygenase (RubisCO) needed for CO2 fixation. The major carboxysome shell proteins, CsoSl A, B, and C, form hexamers which tile together to form the facets of the thin shell. Each hexamer has a small central pore that may play a role in metabolite flux. Using predicted structural models, a specific amino acid within the conserved hexamer pore motif (Phe-Val-Gly-Gly-Gly-Tyr) was chosen to change the size and charge of the pore, respectively. Two mutants of Halothiobacillus neapolitanus were generated in which the wild type csoSJA gene was replaced with the …

Preparation Of Organofluorine Compounds: Exploring Mono-, Di-, And Tri-Fluorination, Diandra M. Rudzinski

Master's Theses

Organofluorine compounds exhibit biological activity and have advantageous properties for drug design. Natural occurring fluorinated molecules are rare, demanding new synthetic methods for their preparation. A novel route to access trifluoromethyl ketones from Weinreb amide precursors is discussed. This is the first documented method for the use of the Ruppert-Prakash reagent, (trifluoromethyl)trimethylsilane, for the production of trifluoromethyl ketones from amide starting materials. This method is tolerant of aryl and alkyl substrates exhibited by their moderate to excellent yields. A discussion of the unusual reactivity of these amides, their selectivity for mono-trifluoromethylation, and other mono-, and di-fluorination attempts are reported.

Ultra-Stable Protein-Polymer Bioconjugates, Kyle S. Cole

Master's Theses

No abstract provided.

The Effects Of Color Concentrates On The Rheology Of Tint Bases, Doug James Herrick

Master's Theses

ABSTRACT

THE EFFECTS OF COLOR CONCENTRATES ON THE RHEOLOGY OF TINT BASES

Douglas James Herrick

Waterborne coatings are formulated with a number of different ingredients; water, latex polymers, pigments, surfactants, dispersants, defoamers, biocides, coalescing aids, and rheology modifiers or thickeners. Rheology modifiers are necessary in order to improve the physical properties of the coating before, during, and after application to a substrate. There are two kinds of rheology modifiers used in waterborne coatings; associative thickeners and non-associative thickeners. Coatings formulated with associative thickeners are quite sensitive to coating variations; the slightest change in the formulation has profound effects on the …

Controlling Nanoparticle Dispersion For Nanoscopic Self-Assembly, Nathan S. Starkweather

Master's Theses

Nanotechnology is the manipulation of matter and devices on the nanometer scale. Below the critical dimension length of 100nm, materials begin to display vastly different properties than their macro- or micro- scale counterparts. The exotic properties of nanomaterials may trigger the start of a new technological revolution, similar to the electronics revolution of the late 20^th century. Current applications of nanotechnology primarily make use of nanoparticles in bulk, often being made into composites or mixtures. While these materials have fantastic properties, organization of nano and microstructures of nanoparticles may allow the development of novel devices with many unique properties. …

Preparation Of Nitrogen-Containing Heterocycles Via Cyclization Of Pyridine-Tethered Organolithiums, Elizabeth Archer

Master's Theses

No abstract provided.

Design And Synthesis Of Fluorescence Turn-On Probes For Iron, Randy K. Jackson

Master's Theses

No abstract provided.

Anti-Corrosion Performance Of Primer And Top Coat Formulations For Metal Substrates, Laural Elizabeth Hargrove

Master's Theses

This project involved the improvement of several properties of the current “universal” primer coating sold by Kelly-Moore Paint Company. This formulation is an all purpose primer used both for interior and exterior applications. However, its corrosion resistance has room for improvement. The addition of sodium nitrite, an aminocarboxylate salt, and a zinc phosphate-based additive were all tested as corrosion inhibitors. In addition, during the project the coating binder was changed to improve adhesion. After a systematic experimental program, a new “universal” primer with increased corrosion resistance and adhesion was formulated.

A direct to metal top coat formulation sold by Kelly-Moore …

Producing Data To Support The Detection And Understanding Of Early On-Set Corrosion In Accelerated Weathering, Stephanie Suzanne Messer

Master's Theses

The goal of the research reported herein was to generate data towards the development of methods and protocols for detecting, quantifying, and understanding early on-set corrosion events on and above aluminum 2024-T3. The studies focused on incorporating two main fluorescent probes into a few model epoxy and/or urethane coatings to detect X and Y axis specific pH changes occurring upon and above the substrate during pre-macroscopic corrosion. The primary fluorophore used was fluorescein, a pH sensitive probe capable of detecting the changes, mainly increases in pH that accompanies aluminum corrosion. The second molecular probe, rhodamine B, was utilized to better …

The Effect Of Poss Modified Montmorillonite On Elastomer Nanocomposites, Elana Celeste Lewis

Master's Theses

The goal of this thesis was to define the structural factors that determine performance in clay/rubber nanocomposites when polyhedral oligomeric silsesquioxane (POSS) is used as a dispersant. POSS has been shown previously to enhance clay, metal oxides, and carbon nanotube dispersion in thermoplastics matrices, but their performance in rubber systems has not yet been explored. There is little fundamental understanding of how POSS interacts with clay and how these modified fillers react with rubber matrices. This thesis aims to develop a greater understanding of the mechanisms of POSS-clay modification through the examination of two different POSS-clay systems and their effect …

Synthesis Of Half-Loaded Nitroimidazole Indocyanine Green Dyes Attached To Carbon Nanotubes, Courtney L. Stanford

Master's Theses

Indocyanine green dye is the only FDA approved NIR fluorescent dye that can be used in humans. 2-Nitroimidazoles are very effective radiosensitizers, have low cytotoxicity, and target hypoxic tissue. By coupling the two together, hypoxic tumors can be targeted and imaged. Previous work has been done to couple 2-nitroimidazole to both sides of the indocyanine green dye. This work focuses on expanding that concept to couple 2-nitroimidazole to only one side of the dye, thus allowing for the other end to be available to couple to another compound, generating a half loaded 2-nitroimidazole indocyanine green dye. In theory, this half-loaded …

Fluorescence Tagging Of Marine Low Molecular Weight Carboxylic Acids, Brian C. Gismervik

Master's Theses

This thesis aims at the evaluation of the best amide bonding strategy that places a fluorescence aminomethyl coumarin tag onto a LMW organic acid in aqueous solution. A three-stage study was conducted. First, a suitable aminomethyl coumarin fluorophore was synthesized. Second, a library of acid-derivatized standards was synthesized for use in optimizing the anticipated HPLC separation of a mixture of LMW acids expected to be found in marine samples. Third, the aforementioned amide coupling strategies were screened to identify the most applicable method for our reaction conditions to the tagging of LMW organic acids in a large number of field …

The Development Of Transparent, Processable, Thermally-Responsive Coatings, Christopher David Roland

Master's Theses

Polymer matrices are commonly used as guest-host systems for organic chromophores for use in non-linear optical materials. The chromophores must be aligned or poled in an electric field in order to impart anisotropy and non-linear activity to the material. This poling process raises several issues, the two largest being the eventual relaxation of the chromophores back into random orientations due to brownian motion, and high molecular weight polymer matrices limiting chromophore mobility during poling. The prevention of this relaxation process is an area of significant interest, especially in applications that require long term coating stability and activity. In this study, …

Development Of A Quantitative High Throughput Method For The Early Detection Of Corrosion On Coated Aluminum, Jeffrey Clayton Foster

Master's Theses

Eight fluorescent indicators were evaluated for their ability to detect the corrosion of aluminum metal substrates. The fluorophore Rhodamine-salicylaldehyde (RSA) was selected as a candidate for further study based on its ability to bind and detect aluminum ions at low concentrations, its selectivity for aluminum ions, its long-term stability, its solubility in our solvent-based epoxy formulation, and its compatibility with our testing method.

A recent publication suggested that an alternative method of fluorescence activation was possible—an acid-promoted ring opening that occurred in the absence of metal ions. To prove the capability of RSA to bind aluminum ions, thorough ¹H …

Synthesis Of S-Ribosyl-L-Homocysteine And Analogs Modified At The Homocysteine-C3 Position, Ruoyi Liu

Master's Theses

Quorum sensing (QS) is a process of bacterial cell-to-cell communication that conveys population density information in order to coordinate gene expression to produce synchronized behaviors. QS regulates the expression of virulence genes in many species of bacteria; hence, the manipulation of QS pathways may lead to treatment options against many bacterial diseases. The LuxS enzyme converts S-ribosyl-L-homocysteine (SRH) into homocysteine (HCys) and 4(S),5-dihydroxypentane-2,3-dione (DPD), which is the precursor of autoinducer-2 (AI-2). Thus, inhibitors of LuxS could prevent QS by halting the conversion of SRH to AI-2 rendering the cell “uncommunicative”. This work shows the successful chemical synthesis …

Ph-Responsive Polymers For Biosurfaces: An Investigation Of Solution Properties And Surface Modifying Performance, Yuhong Wei

Master's Theses

Gantrez® copolymers are used widely in the personal care industry, but their mechanisms of interaction with dental surfaces are poorly understood. In this study, we determined a number of the solution and polymer properties that control deposition, adsorption and adhesion in Gantrez® polymer aqueous solutions to model dental surfaces. QCM studies specifically showed that polymer adsorption to model hydroxyapatite surfaces occurred only in solutions with polymer concentration above c*. Adsorption and adhesion was greater in solutions of higher pH, where greater charge density along the polymer backbone was expected. For films prepared via spin-coating onto mica surfaces, addition of surfactants …

The Synthesis Of A Homologous Series Of Alkyl Lumazines And Their Application To The Dispersion Of Carbon Nanotubes, William P. Kopcha

Master's Theses

In this thesis, the synthesis of a series of alkyl lumazine surfactants (LC_n) is reported. Their application to the dispersion of both CoMoCAT and HiPco single-walled carbon nanotubes (SWNTs) is examined in detail and the thermal stability and chirality selection properties of dispersions made with these surfactants were compared both between themselves and with an alkyl flavin surfactant (FC₁₂). Lumazine alkyl chain length exhibited some control over the quality and the quantity of SWNTs dispersed. LC₁₀ was deemed most appropriate for comparison with FC₁₂ based on considerations of solubility and nanotube individualization. …

Improved Synthesis Of The Longtailed Mealybug Pheromone, Johanna M. Bakonyi

Master's Theses

No abstract provided.

Strawberry Growth, Yield, Fruit Nutrition, And Control Of Verticillium Wilt With Pre-Plant Soil Fumigants, Ozone, And Biological Control, Justin J. Scurich

Master's Theses

Verticillium wilt is a widespread soilborne disease of strawberry historically controlled by soil fumigation with methyl bromide (MB). MB was banned by the United Nations in 1995 and will be completely phased out by 2015. Research has concentrated on alternative methods of disease control without finding a single alternative able to replace MB in widespread disease control and yield increase. For the current study, strawberries were greenhouse grown in container pots filled with soil from both infested and non-infested areas of a commercial strawberry field in Watsonville, CA. Treatments included pre-plant soil fumigation with commercially available formulations of methyl bromide, …

Responsive Materials Via Diels-Alder Chemistry, Gregory Alan Strange

Master's Theses

The corrosion of infrastructure imposes a significant monetary cost, and at times human cost, upon society. Methods to improve corrosion resistance of materials are described herein which utilize the reversibility of the Diels-Alder reaction to impart thermal responsiveness upon materials. Such stimuli responsiveness can potentially play a role in self healing properties which lead to reduced cracking and thus increased corrosion protection.

Reversible Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates. Hydrophobic dieneophiles were prepared and attached to glass slides and capillaries to yield a nonwetting surface. Thermal treatment of the surfaces cleaved the Diels-Alder linkage, …

Evaluation Of The Performance Of Non-Covalent Molecular Mechanical Models For Zn2+ And Mg2+ Metal Ions, Maria Magdalena Kamm

Master's Theses

Computer simulations using molecular dynamics (MD) on classical molecular mechanical

(MM) interatomic potentials can provide valuable information and quantitative

predictions about these systems. In MD calculations binding free energies of ions to

host molecules can be studied if correct ion solvation free energies in aqueous solution

are obtained. However, no MM models exist that parametrize various Zn2+ and

transition metals consistently and consider both structural and thermodynamic data

simultaneously.

The first part of our work focused on MD free energy perturbation (FEP) simulations

to derive MM interaction parameters for Zn2+ and Mg2+ ions in aqueous

solution. To obtain these parameters …

Adhesion And Durability Of Coatings On Polypropylene Exterior Sidings, Logan Riekio Stark

Master's Theses

Plastics have become a universal material for use in a myriad of commercial and consumer products. One such product, exterior siding, is the focus of this project. Although siding products were originally made from wood, vinyl siding, which offered superior performance, was introduced in the 1950’s. More recently, polypropylene (PP) siding has been introduced; PP provides a stronger product, which allows for deeper patterns and better edge detailing. PP siding, compared to traditional wood siding, doesn’t warp, crack, or degrade as easily with extended exposure to the elements, and is cheaper to maintain. However, even plastic siding must be coated. …

Chemical, Biological, And Preliminary In Vitro Studies Of Novel Vanadium(Iv) Complexes With Schiff Bases And Thiosemicarbazone Ligands, Nerissa Abigail Lewis

Master's Theses

9-Anthraldehyde-N(4)-methylthiosemicarbazone (MeATSC), potassium (E)-2-(2-hydroxybenzylideneamino)-3-(1H-indol-3-yl)propanoate (K[(Sal-L-tryp)] and 2-(2-hydroxybenzylamino)-3-(1H-indol-3-yl)propanoic acid (the reduced Schiff base) were prepared using known synthetic procedures. Two novel thiosemicarbazone ligands, (E)-N-ethyl-2-(4-hydroxy-3-methoxybenzylidene)hydrazinecarbothioamide (N-Ethhymethohcarbthio) and (E)-N-ethyl-2-(1-(thiazol-2-yl)ethylidene)hydrazinecarbothioamide (acetylethTSC), were also prepared. All ligands were characterized by FT IR and electrochemistry. N-Ethhymethohcarbthio were characterized by elemental analysis whereas the reduced Schiff base and K[(Sal-L-tryp)] were characterized by ESI MS. X-ray crystallography was also used to characterize acetylethTSC. The ligands were then reacted with [VO(Sal-L-tryp)(H2O)] (1) (Sal-L-tryp = N-salicylidene-L-tryptophanate) to produce the …

Continuous Analysis Of Photocatalytic Activity In Thin-Films And Coatings, Steven Michael Allee

Master's Theses

Materials that undergo photocatalytic reactions create evolved gases due to ultraviolet light decomposition. Current methods of measuring these gases typically result in destruction of the sample. A test fixture was developed to measure evolved gases in a nondestructive manner through the utilization of a flow-through sensor array system. Preliminary testing indicates responsive measurements down to parts-per-billion sensitivity for some gases and will be compared with mass spectrometry measurements. Further development of this process could lead to the ability to measure photocatalytic reaction gases on a continuous basis without interruption of the process or destruction of materials introduced to the system.

Effect Of Au Content On Microstructural Evolution Of Snagcu Solder Joints That Undergo Isothermal Aging And Reliability Testing, Patrick J. Hyland

Master's Theses

Electronics, especially, printed circuit boards (PCBs) are a widespread technology. Metal coatings or “surface finishes” are often added to PCB board pads and component leads during manufacturing to improve their performance. Electroplated nickel/gold over copper is a popular surface finish for printed circuit boards and component leads. The presence of gold in solder joints, however, is known to have detrimental effects referred to as gold embrittlement. It is generally understood that tin-lead solder joints with less than 3 weight percent (wt%) of gold will not experience reliability issues. The acceptable level of gold in lead-free solder joints, however, is less …

Detection Of Hydrogen In A Two-Phase Cryogen Flow Stream With Thermal Protection Design Configurations, Anton Dmitrievitch Netchaev

Master's Theses

All commercial liquid-propelled rockets use hydrogen as means to reach outer space. These rocket boosters are tested on the ground and use hydrogen as means of purging the remaining explosive gasses left in the test tanks. To conserve helium, a non-renewable resource, a test fixture was developed to characterize and test sensors that could improve the accuracy and response of the current system. By improving response time of the system, helium waste during the purge process can be minimized. The test fixture was constructed to simulate temperatures and pressures that are encountered at the testing facilities. The test fixture is …

Investigation Of The Effect Of Xanthophyll Composition On Energy Transfer And Quenching In Light-Harvesting Complexes From The Diatom, Phaeodactylum Tricornutum, Jose L. Robinson Duggon

Master's Theses

No abstract provided.

Synthesis And Characterization Of Linear And Branched Polylactic Acid For Use In Food Packaging Applications, Kyle C. Bentz

Master's Theses

Polylactic acid (PLA) resins of various molecular weights and molecular weight distributions were synthesized. Linear, narrow molecular weight distribution (MWD) PLA resins were synthesized, as well as resins containing both high molecular weight branched structures and low molecular weight chains and oligomers. Narrow MWD resins were synthesized for use as adhesives for corrugated paperboard and broad MWD resins were synthesized for use as a waterborne coating. PLA resins were dispersed for use as a waterborne coating. Success has been made at forming films utilizing various plasticizers and surfactants as well as polyvinyl alcohol as dispersing agents. A cold dispersion procedure …