Chemistry Commons^™

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Syneresis And Rheology Mechanisms Of A Latex-Heur Associative Thickener System, Travis Bruno Smith

Master's Theses

Rheology modifiers are used in paints and coatings to ease their application to a surface, prevent sagging once applied, and allow the leveling of brushstrokes, among other benefits. The early rheology modifiers were hydroxyethyl celluloses (HECs), a type of non-associative thickener that is relatively inexpensive and synthesized from cellulose, which is abundant. However, coatings that are modified with HECs tend to suffer from poor leveling and syneresis (phase separation). HECs have since been replaced with associative thickeners (ATs). These thickeners, when properly formulated, produce stable dispersions that have improved rheological properties, yet, unlike HECs, are sensitive to changes to the …

Revision-Polyurethane-Graphene Nanocomposites For Corrosion-Resistant Coatings, Alexandra Rose Stevenson

Master's Theses

Corrosion is a prevalent concern throughout the world, causing significant monetary and safety concerns. Research has been dedicated to developing cost-effective solutions for corrosion that will also meet increasingly stringent environmental regulations. The recently discovered nanomaterial graphene has been proposed as a potential component in anticorrosion technology due to its strong air and water barrier properties. However, graphene is a relatively expensive, difficult to synthesize material. By incorporating it into nanocomposites, its properties can be exploited even at low concentrations. Previous work has been conducted involving the preparation of anticorrosive polystyrene-graphene nanocomposites; these materials were found to be effective long-term …

Morphology-Property Relationship For Binary Organic Thin Films, Alyssa Lynn Griffin

Master's Theses

Organic thin films can be readily mass-produced through solution-based fabrication methods including ink-printing and solution-casting because their light weight, flexibility, and inexpensive sources. Their applications range from organic field-effect transistors (OFET), organic solar cells (OSC), to organic light emitting diodes (OLEDs). Compared with pure component films, binary organic thin films (BOTF) allows for novel characteristics and specialized features to handle more demanding tasks. Due to the complex intermolecular interactions in BOTF, various microscopic phases with different morphological and electronic properties may be formed and this information is difficult to extract through conventional bulk measurements.

Organic thin films can be readily …

Composition Effects On Sheen And Spread Rate Of An Interior Flat, One Coat Latex Paint Formulation, Dana James Christensen Ii

Master's Theses

Interior flat, white latex paint is a common coating applied to walls around the world. Development of a coating with one coat hide capability is a pinnacle achievement for paint formulators as it has the potential to save consumers both time and money. One coat paints already exist on the market, but they are limited in color, coverage, and often have many disclaimers. Work done was part of a project initiated by ChemoursTM Titanium Technologies.

The goal of the project presented in this article was to create an interior flat, white latex paint that yields a spread rate of greater …

Effect Of Surfactant Architecture On Conformational Transitions Of Conjugated Polyelectrolytes, Greg A. Braggin

Master's Theses

Water soluble conjugated polyelectrolytes (CPEs), which fall under the category of conductive polymers, possess numerous advantages over other conductive materials for the fabrication of electronic devices. Namely, the processing of water soluble conjugated polyelectrolytes into thin film electronic devices is much less costly as compared to the processing of inorganic materials. Moreover, the handling of conjugated polyelectrolytes can be performed in a much more environmentally friendly manner than in the processing of other conjugated polymers because conjugated polyelectrolytes are water soluble, whereas other polymers will only dissolve in toxic organic solvents. The processing of electronic devices containing inorganic constituents such …

The Investigation Of The Low Temperature Combustion Of Mesitylene And Tert-Amyl Methyl Ether By Synchrotron Photoionization Mass Spectrometry, Martin Yu-Hin Ng

Master's Theses

This thesis describes the combustion experiments performed at the Chemical Dynamics Beamline of the Advanced Light Source (ALS) located at the Lawrence Berkeley National Laboratories (LBNL). The need for renewable fuel sources, the need for the study of their combustion in the contexts of homogenous charge combustion ignition (HCCI) engines can be found in Chapter 1. The components of the experimental set-up used throughout this thesis—time-of-flight mass spectrometer, Excimer laser, vacuum pumps and other components—and the components of ALS responsible in synchrotron radiation generation and processing—the linear accelerator, the booster ring, insertion devices, gas filters and monochromator are explained in …

Electrolyte Effects On The Kinetics Of Comproportionation Electron-Transfer Reactions And On Intervalence Charge-Transfer Band Energies Of Binuclear Ruthenium Ammine Complexes, Zhiji Han

Master's Theses

Chapter 1 describes an overview of electron-transfer reactions. The kinetic equations for ET reactions have also been described in detail.

Chapter 2 describes a series of novel kinetic accelerations which deviate strongly from the predictions of the classical Debye-Huckle theory with a range of different added “inert” electrolytes. The greater catalytic effects seen with the heavier halides and other catalytic electrolytes (especially certain dicarboxylates) indicate an important role for hole-transfer superexchange in the ET transition state. The hypothesis of a catalytic ternary association complex, [RuII--X--RuIII] has also been explored by kinetic modeling of the reaction. An increasing ratio of anion-catalyzed …

Furanic Molecules: Multiplexed Synchrotron Photoionization Investigations And Aerosol Studies, Audrey R. Smith

Master's Theses

The oxidation reactions of 2-methylfuran (2MF) and 2-ethylfuran (2EF) initiated by Cl radicals is studied at the low temperatures, in addition to the determination of the absolute photoionization cross-sections of 2EF, 2-acetylfuran, and furfural. These experiments are carried out using synchrotron photoionization mass spectrometry (SPIMS) with an orthogonal time-of-flight spectrometer used for mass analysis at the Advanced Light Source of Lawrence Berkeley National Laboratory. CBS-QB3 calculated adiabatic ionization energies (AIE) agree well with the experimental results and published literature values. Furfural is found to be the dominant product of 2MF oxidation, with 2-acetylfuran and 2-vinylfuran being the dominant products of …

Investigations Of Thioether Generation For S-D-Ribosyl-L-Homocysteine Synthesis, Brendan Corcoran

Master's Theses

Creation of the thioether linkage is a fundamental step for the chemical preparation of the bacterial quorum sensing molecule S-D-ribosyl-L-homocysteine (SRH). Although previous preparations of SRH and its analogues have been reported in the literature, they employ assorted methods with varied results. Therefore, a reassessment of the methodology used for synthetic preparation of the thioether bond in SRH-like molecules is here considered. This work examines four methods of thioether generation following two mechanisms, bimolecular nucleophilic substitution (S_N2) and radical-initiated thiol-ene coupling, in an attempt to generate SRH in a more efficient and reproducible manner. Both mechanisms address …

A Novel Method For Confirming The Presence Of Volatile Reduced Sulfide Compounds Via Inductively Coupled Plasma-Optical Emission Spectroscopy, Krystal Lynne Parker

Master's Theses

Millions of dollars in destruction in the past decade have resulted from the use of Chinese drywall in homes. There are also potential health hazards related to this corrosive material. As such, it is important to find a way to identify Chinese drywall. Drywall can be tested for certain markers, such as strontium, sulfur, and carbonates to identify it as corrosive Chinese drywall. The laboratory preparation and analysis should be efficient and cost effective. The methods previously used, such as an X-ray fluorescence gun have had issues with getting a proper reading due to the layers of other materials found …

Mechanistic Studies Of Salt Effects On Bimolecular Electron-Transfer Reactions Of Pentaamine Ruthenium Pyridyl Complexes Studied By 19f Nmr Line-Broadening And T2 Spin-Echo Techniques, Nicholas J. Magarian

Master's Theses

Kinetic salt effects on the bimolecular ET self-exchange reaction between pentaamineruthenium(II)(3-trifluoromethylpyridine)²⁺, (NH₃)₅Ru^IItfmp²⁺, and pentaamineruthenium(III)(3-trifluoromethylpyridine)³⁺, (NH₃)₅Ru^IIItfmp³⁺, have been measured using both ¹⁹F NMR line-broadening and CPMG T₂ spin-echo relaxation techniques in H₂O and D₂O. Over the equimolar reactants concentration range of 0.10 mM – 8.00 mM there was a definite “self-salting” rate increase arising from the increased solution ionic strengths due to the reactants and counterions themselves. The magnitude of this effect diverged significantly, however, …

Development And Implementation Of Dispersion Phase Diagrams (Dpds) For Four Different Hydrophobically Modified Ethoxylated Urethane (Heur) Based Acrylic Paint Systems, Tyler J. Bell

Master's Theses

Latex polymers serve as binders in a wide range of architectural paints and coatings. A latex is an aqueous colloidal dispersion of polymer particles that when dried above the polymer’s film formation temperature coalesces into a dry polymer film (Dragnevski, Routh, Murray, & Donald, 2010). The other main components of paint include associative thickeners, surfactants, pigments and fillers with the thickener being the primary area of focus for this study.

The relatively simple system of latex, associative thickener and surfactant has been studied extensively. These studies have shown the mechanism of thickening for the associative thickener, and surfactant effects on …

An Investigation Of Poly(N-Isopropylacrylamide) For Applications With Microfluidic Paper-Based Analytical Devices, Haydn Thomas Mitchell

Master's Theses

N,N′-methylenebisacrylamide-crosslinked poly(N-isopropylacrylamide), also known as P(NIPAM), was developed as a fluid delivery system for use with microfluidic paper-based analytical devices (microPADs). MicroPADs are postage-stamp-sized devices made out of paper that can be used as platforms for low-cost, simple-to-use point-of-care diagnostic assays. P(NIPAM) is a thermally responsive polymer that absorbs aqueous solutions at room temperature and will expel the solutions to microPADs when heated. The fluid delivery characteristics of P(NIPAM) were assessed, and P(NIPAM) was able to deliver multiple solutions to microPADs in specific sequences or simultaneously in a laminar-flow configuration. P(NIPAM) was then shown to be suitable …

Improving Hybrid Solar Cells: Overcoming Charge Extraction Issues In Bulk Mixtures Of Polythiophenes And Zinc Oxide Nanostructures, Grant T. Olson

Master's Theses

Organic photovoltaics (OPVs) have received a great deal of focus in recent years as a possible alternative to expensive silicon based solar technology. Current challenges for organic photovoltaics are centered around improving their lifetimes and increasing their power conversion efficiencies. One approach to improving the lifetime of such devices has been the inclusion of inorganic metal oxide layers, but interaction between the metal oxides and common conjugated polymers is not favorable. Here we present two methods by which the interactions between polythiophenes and nanostructured ZnO can be made to be more favorable. Using the first method, direct side on attachment …

Glass Foundation Chemosensor Synthesis And Functionality Analysis, Justin D. Dancer

Master's Theses

Chemosensors are created through a series of reaction steps on controlled pore class (CPG) and terminate with a Cu²⁺ metal binding site. Each monolayer of reactant insures that the metal binding site exposed to solution would serve as an indicator displacement assay (IDA) sensor. The purpose of this research is to create a molecular sensor with a high density of terminal metal sites to quantify bidentate substrates. To accomplish this, each synthetic step of the sensor is examined in order to test the effects of new linkers, ligands, and variously sized dendrimers to see if small structural changes could …

Study Of The Structure-Property Relationships That Determine The Effects Of Latexes And Starch Containing Latex Emulsions On The Performance Of The Barrier Coatings (Sub-Coat) For Paper, Joanna Marie Monfils

Master's Theses

The history of carbonless paper dates back to the 1940s. Before this, a carbon copy sheet was needed between sheets of paper to be able to produce one or more copies simultaneously during writing. The pressure from a pen or typewriter would help deposit the ink of the carbon paper onto the blank sheet of paper under the original written sheet to create a “carbon copy.” This method did however, have its disadvantages. Not only did it produce a limited number of copies, but it was also a messy process. So came the creative process of using microencapsulated dyes to …

Comparative Analysis Of Two Successive Vintages Of Cabernet Sauvignon Must And Pre-Barrel Wine From Two Distinct Soil Types, Jon Garret Page

Master's Theses

The objective of this study was to determine if there were significant statistical differences in the response variables of Cabernet Sauvignon must and pre-barreled wine analyzed from two vintages from two distinct soil types.

Research was conducted at California Polytechnic University, San Luis Obispo to examine the quantitative chemical analysis of 22 different response variables of Cabernet Sauvignon grapes. The same 22 variables were analyzed in must and pre-barreled wine samples harvested from both Calodo Clay Loam soil and Zaca Clay soil. The analyses were done at both California Polytechnic University, San Luis Obispo and Vinquiry Inc. Labs. The results …

Mechanistic Studies Of Bimolecular Electron Transfer Self-Exchange Rates Of Ruthenium Ammine Pyridyl Complexes Measured By Nmr Line Broadening Techniques, Yishun Qin

Master's Theses

The electron transfer (ET) self-exchange rates on a series of complexes of (NH₃)₅Ru^II/III L^2+/3+ in D₂O (where L is a substituted pyridyl ligand) were investigated by dynamic NMR measurements. Significant rate enhancement was observed for the cases of L = 3-phenylpyridine and 4-phenylpridine due to possible π-π stacking between Phpy ligands. These observations matche well with recent stopped-flow work by Mehmood on a similar set of related pseudo-self exchange reactions. Kinetics of the (NH₃)₅Ru^II/III (3-trifluoromethylpyridine)^2+/3+ self-exchange reactions with addition of various simple/complex salts and hexacyano salts …

Formulation Development Of A Polymer-Drug Matrix With A Controlled Release Profile For The Treatment Of Glaucoma, Eric W. Tsoi

Master's Theses

Glaucoma is the leading cause of blindness in the United States accounting for 9-12% of all cases of blindness. Currently, the front line treatment for glaucoma are prostaglandins that may have to be taken up to several times a day. Even with proper treatment, roughly 11% of the patients using the treatment are non-compliant and lose their vision. In this project, ForSight Laboratories has developed a pharmaceutical drug delivering implant with the capability of sustaining long-term release of a prostaglandin as a new way to treat the condition. This project reports the product development of a polymer drug matrix with …

The Influence Of Hydrogeomorphology, Soil Redox Conditions, And Salinity On The Spatial Zoning Of Saltgrass, Salt Rush, And Cattails In Scotts Creek Marsh, Swanton Pacific Ranch, Ca, Mark D. Gormley

Master's Theses

Scotts Creek Marsh (SCM) is a small coastal wetland ecosystem in Davenport, CA. The vegetation of SCM is dominated by three halophytic zones comprised of saltgrass, salt rush, cattails. The objectives of the study were (i) to investigate the variables that influence the zoning of the three dominant halophyte communities in SCM and (ii) to the test the effectiveness of Indicator of Reduction in Soil (IRIS) tubes to indicate the reduction of S. The study examined the following parameters from April 6 to July 21, 2013: (i) the HGM of Scotts Creek Marsh, (ii) soil oxidation and reduction (redox) conditions, …

Morphology And Conformation Of Polythiophene Derivatives In Anisotropic Core-Shell Nanocomposites And Solution, Neil Redeker

Master's Theses

Conjugated semiconducting polymers have garnered substantial interest in recent years due to the potential for use in various applications, particularly in the field of electronic devices such as photovoltaic cells and light emitting diodes. Conjugated polymers offer numerous advantages in these applications, including low cost and high flexibility, but electronic devices based on these materials are currently limited by poor performance. Because of these limitations, increased focus has been placed on improving conjugated polymers for use in commercially viable products. Here, a novel core shell hybrid nanocomposite based on anisotropic zinc oxide nanowires and a side-chain functionalized polythiophene is reported. …

Lipid Production By Microalgae Treating Municipal Wastewater, James Edward Kelley

Master's Theses

Microalgae hold much promise as a feedstock in liquid biofuel production. Lipid content of microalgae cells range from 30-80% dry weight of biomass. It is projected that microalgae can produce between 1,000-6,500 gallons/acre/year of oil. Currently, production of industrial algae operates in open raceway ponds that use minimal capital and energy inputs to culture algae. Raceway ponds can also be used to grow microalgae from municipal waste streams. Although high biomass productivity can be achieved in these systems, there remains a large production gap between large volumes of biomass cultivation and high lipid content from microalgae cells. Low lipid content …

Nanoparticles And Polymer Crystallization Kinetics In Hybrid Electronic Devices, Taylor William Wagner

Master's Theses

Conjugated semi-conducting polymers have become well known for their potential applications in hybrid electronic devices like solar cells, LEDs, and organic displays. These hybrid devices also contain inorganic nanoparticles, which complement the polymer when they are combined into the same layer. Control over the conformation and crystallinity of the polymer is critical for device performance, yet not much is known about the effect that these nanoparticles have on the polymer. Here, zinc oxide nanowire was surface modified with mono-substituted-carboxylic acid tetraphenylporphyrin and dodecanethiol, and introduced to poly(3-hexyl thiophene) in solution. The electron transfer, kinetics, and thermodynamics of this system were …

Phase Behavior And Rheology Of Latex, Thickener, Surfactant Mixtures And Liquid Crystal Based Compositions For Printing High-Efficiency Flexible Electronics, Franceska Anna Santos

Master's Theses

This project consists of two parts. One area of focus in the first part is understanding the interactions between a non-ionic, block copolymer type dispersant and hydrophobically-modified, ethoxylated urethane (HEUR) associative thickeners in water. The dispersant was mixed at various concentrations (0-2% by weight) with HEUR thickeners at 1% by weight concentration in the aqueous medium. This study is an integral part of our attempts to determine mechanisms of viscosity drop when colorant dispersions are added to latex tint base formulations thickened with associative thickeners. One of the HEUR thickeners is a product that has been available for over three …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

Re-Healable Coating Based Upon Thermally Responsive Linkages, Dahlia Ningrum Amato

Master's Theses

The goal of this thesis was to design thermally responsive polyol resins that would be compatible with isocyanates. Two approaches were made to reach this goal, the first involved functionalizing soybean oil and the second involved post-polymerization modification of a methacrylate based resin.

A soybean based coating with thermally responsive Diels-Alder linkages has been prepared following an automotive two-component formulation. The resulting coatings displayed the capability to be healed following physical deformation by a thermal stimulus, and such a material has significant potential for end users. Various curing agents were employed, and resulted in variation of scratch resistance and re-healablity. …

Photoionization Mass Spectrometry And Photoelectron-Photoion Coincidence (Pepico) Spectroscopy Studies Of Select Biofuel Molecules, Joseph G. Czekner

Master's Theses

This thesis is the culmination of numerous experiments, performed on two different continents, investigating the spectroscopic and thermodynamic properties of several biofuels and fuel additives. It will start with an introduction about the motivation behind these experiments. The second chapter will outline the experimental details of the apparatus at the Advanced Light Source (ALS) in Berkeley, CA, followed by the Swiss Light Source (SLS) in Villigen, Switzerland. Third, the theoretical concepts and data analysis methods will be discussed in detail.

Chapter 4 will be the start of the newly obtained data. It presents some photoionization mass spectrometry studies on γ-valerolactone …

Surface Tethered Pamam Dendrimers On Controlled Pore Glass As Color Release Sensors For Phosphates, Chang Liu

Master's Theses

Poly(amidoamine) dendrimer (PAMAM) are highly branched macromolecules with reactive amine groups in their interior and exterior. PAMAM dendrimers were attached to controlled pore glass (CPG) surfaces in order to create new functionalized surfaces and used as platforms for UV-vis and fluorescent sensing of phosphate substrates via indicator displacement assays (IDA).

CPG surfaces were first modified with different sized PAMAM dendrimers (generation 3.0, 4.0, and 5.0), then reacted with two strong metal-chelators: aminofunctionalized terpyridine (synthesized from 2,2’:6’,2’’-terpyridine) and Nα-Nα-bis(carboxymethyl)-L-lysine (Lys-NTA). First of all, Cu(II) metal ion binding capacities were measured on the surfaces. Second, two terminal group density tests, amine assay …

Probing The Low Temperature Oxidation Of Furanic Biofuels, 2-Methyltetrahydrofuran And 2,5-Dimethylfuran, Utilizing Orthogonal Time-Of-Flight Mass Spectrometry Coupled To Synchrotron Radiation, Matthew Mcmanus

Master's Theses

Concern over natural resources and global climate shifts has increased the focus of sourcing transportation fuels from depleting oil wells to regenerative, biological based solutions. One avenue of biologically sourced fuel involves the extraction of C5 and C6 sugars from the woody, fibrous, and inedible plant materials, otherwise known as lignocellulosic biomass. These cellulosic sugars can be converted to target biofuels and biofuel additives like the furanic compounds, 2,5-dimethylfuran and 2-methylfuran. In this thesis, the low temperature oxidation of two compounds, 2,5-dimethylfuran and 2-methylfuran, are explored. These reactions were conducted at the Advanced Light Source in Berkeley, CA and used …