Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3661 - 3690 of 4153

Full-Text Articles in Chemistry

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen Feb 2000

Electrochemical Characterization Of Ir-Ta-Ti Metal Oxide Coated Titanium Anodes, Ting-Yong Wang, Li-Kun Xu, Guang-Zhang Chen

Journal of Electrochemistry

Ir-Ta-Ti metal oxide coated titanium anodes of variable composition were prepared by thermal decomposition. Their micro morphorogies and electrochemical properties were characterized by scanning electron microscope, open circuit potential, cyclic voltammetry, consumption rate measurements and accelerated life test. The SEM results indicated that all coatings were of a porous and cracked-mud microstructure influenced greatly by the composition of coatings. The electrochemical measurements showed that the Ir-Ta-Ti ternary oxide-coated anodes exhibited excellent electrochemical activity and electrochemical stability in both acidic media and seawater which were affected by the composition and microstructure of the coatings. Owing to good corrosion resistance and low …

Go to article

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu Feb 2000

Studies On Electrochemical Synthesis Of 4,5-Disubstituted-1,2- Benzoquinones And The Reaction Mechanism, Xian-Zhang Bu, Gui-Wu Xiao, Lin Ma, Xing-Chum He, Ling-Quan Gu

Journal of Electrochemistry

The oxidation peak potentials (Ep) of alinine derivates and catechol in 0.1 mol/L KCl+15% alcohol solution were measured by cyclic voltammograms technique. The electrochemical oxidation condition was set according to the Ep. Three derivates of 4,5-disubstituted -1,2-benzoquinones were prepared via electrochemical oxidation-Michael addition reaction. The possible mechanism of electrochemical oxidation-Michael addition reaction is presented.

Go to article

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui Feb 2000

Cathodic Indirect Electro-Oxidation——Organic Electro-Synthesis Dimethyl Sulfone, Deng-Ping Gu, Rui-Zhi Wang, Hong-Kun Zhang, Xue-Ying Zhang, Wei Li, Bao-Qiu Cui

Journal of Electrochemistry

A cathodic indirect electro-oxidation system was established for indirect electro-oxidize dimethyl sulfoxide to dimethyl sulfone with electro-eduction generated H2O2 catalyzed by the pertungstate/tungstate (WO52-/WO42-) redox mediator. Influences of current density, pH, temperature, and the current efficiencies etc. On the cathodic indirect electro-oxidation of dimethyl sulfone were investigated for determining optimum reaction conditions. The current efficiency reached more than 70%. Mother-liquid could be recycled to use without pollution.

Go to article

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan Feb 2000

Effect Of Different Species Of Cobalt Additive On Performance Of Nickel Hydroxide Electrode, Xian-Xia Yuan, Yin-Dong Wang, Feng Zhan

Journal of Electrochemistry

Performances of nickel electrodes when adding or without adding Cobalt in different forms were studied, the results were interpreted by cyclic voltammetry(CV) and electrochemical impedance spectroscope (EIS). It was demonstrated that the additions of Co, CoO, CoO+Co by mechanically mixing with Ni(OH)2 all can improve the performance of nickel electrode to some extent, and when Co is added in the form of CoO the best performance can be obtained. This can be mainly attributed to the fact that three kinds of Co additives all improved the structure of nickel hydroxide and the ability of H+ in electrolyte transporting …

Go to article

Sprayed And Thermally Evaporated Carbon Films As Anodes For Lithium Ion Batteries, Shu-Gao Zhang, M.Schleich Donald Feb 2000

Sprayed And Thermally Evaporated Carbon Films As Anodes For Lithium Ion Batteries, Shu-Gao Zhang, M.Schleich Donald

Journal of Electrochemistry

Carbon films were made using spray-thermal evaporation from a kind of pyrolytic carbon powder. The films obtained with graphite structure were both potentio-statically and galvanostaically tested. Cycling patterns indicated a reduction peak on the first cycle corresponding to the formation of solid electrolyte interface, and the capacity values and x values were quite acceptable compared to theoretical ones when charging-discharging current density was suitable. Based on the experimental results, the obtained carbon films could be used as anode materials for relatively determining the electrochemical performances of cathode materials.

Go to article

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai Feb 2000

Electro-Oxidation Of Glyoxal To Glyoxalic Acid, Yin-Sheng Chen, Xin-Sheng Zhang, Jun Hu, Ying-Chun Dai

Journal of Electrochemistry

An investigation has been made to obtain the glyoxalic acid by the electrochemical oxidation of glyoxal solution with hydrochloric acid under various experimental conditions.The cell used consists of a lead cathode, a DSA anode and a cation-exchange membrane of model CM001. The current efficiency and yield for glyoxalic acid generation were 80.0% and 91.1% respectively, under optimal operating conditions: velocity of electrolyte flow 1.4 m·s-1 ,current density 450 A·m-2, temperature 30～40 ℃, initial concentration of glyoxal and hydrochloric acid 9.1%～16.0%, 4%～6%, respectively.

Go to article

An Eis Study On The Synergetic Filming Between Cathodic Protection And The Corrosion Inhibitor, Yong-Tao Zhao, Jian-Hua Wu, Jian-Hua Qian, Hui Yu Feb 2000

An Eis Study On The Synergetic Filming Between Cathodic Protection And The Corrosion Inhibitor, Yong-Tao Zhao, Jian-Hua Wu, Jian-Hua Qian, Hui Yu

Journal of Electrochemistry

The electrochemical impedance spectroscope (EIS) of 907A steel in seawater was investigated to study the film formation and destruction. The corrosion protection mechanism of the synergy interaction between cathodic protection and YKI-5 corrosion inhibitor (a mixture of polyhydric alcohol phosphate ester, phosphate and polyphosphate) is discused. Typical EIS spectral changes were clearly observed during the film formation and destruction processes. EIS results indicated that the film seemed to formed a multi-layered structure which consist of an inner layer (this may be an inhibitor-metal complex layer) and many outer layers of calcareous deposits. The film possesses of good persistency under the …

Go to article

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao Feb 2000

Studies Of Abnormal Infrared Effects Of Nanometer Thin Films Of Transition Metals And Alloys In Acid Solutions, Shi-Gang Sun, Ming-Sen Zheng, Guo-Qiang Lu, Li-Rong Cai, Sheng-Pei Cehn, Xiao-Yin Xiao

Journal of Electrochemistry

The adsorption of CO on electrodes of nanometer thin films of transition metals (Pt, Pd, Rh, Ru) and alloys (PtPd, PtRu) prepared under cyclic voltammetric conditions has been studied by in situ FTIR spectroscopy. The abnormal infrared effects (AIREs) have been explored as a novel and general phenomenon. The AIREs consist mainly in the inversion of the direction of IR band and the significant enhancement of IR absorption by adsorbed CO species. It was revealed that the enhanced IR absoroption of adsorbed species in AIREs depends strongly on the nature of metal or alloy, and on the structure and the …

Go to article

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu Feb 2000

Investigations Of Lithium Ion Battery Electrolyte Solution, Jing-Li Han, Qing-Guo Liu

Journal of Electrochemistry

Synthesis and electrochemical investigations of {LiB[(SO3)C6H3(O)(COO)]OC6H5} in EC/DMC or DMSO/PC mixtures are presented.

Go to article

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu Feb 2000

The Study On Fabricating Thin Electrodes For Polymer Electrolyte Membrane Fuel Cells (Pemfc), Yong-Sheng Yang, Jing-Hua Liu, Chang-Peng Liu, Gong-Quan Sun, Chang-Zhi Li, Tian-Hong Lu

Journal of Electrochemistry

To lower platinum loading in electrodes for polymer electrolyte membrane fuel cell, a new thin electrode fabrication technique (TEFT) was developed in this work. A series of low Pt loading electrodes with smooth and uniformed surface were fabricated by the TEFT. As a result, the maximum power density of the cell with platinum loading of 1 mg/cm2 and Nafion 117 membrane as electrolyte was up to 0.3 W.cm-2. Moreover, the effects of PTFE and Nafion content in cathodes on the performance of PEMFC with low Pt loading electrodes (1 mg Pt/cm2) were examined systematically.

Go to article

Studies Of The Preparation Of Electrodes From Lead Carbonate For Lead-Acid Battery Ⅱ. The Preparation Of Paste Electrodes, Zhong-Xu Dai, Di-Hua Wang, Hao-Hao Ke, Jin-Yun Zou, Yun-Hong Zhou Feb 2000

Studies Of The Preparation Of Electrodes From Lead Carbonate For Lead-Acid Battery Ⅱ. The Preparation Of Paste Electrodes, Zhong-Xu Dai, Di-Hua Wang, Hao-Hao Ke, Jin-Yun Zou, Yun-Hong Zhou

Journal of Electrochemistry

The positive and negative pastes were prepared by mixing PbCO3 and H2SO4 solution as well as relative additives, respectively. The effects of the various formation methods and the charge/discharge conditions on discharge capacity and active material utilization of both electrodes were examined. The results indicate that the performance of the positive electrode formed at 2.0 mA/cm2 is better than that formed at higher current density under the same charge/discharge condition, the PAM utilization reaches 74.4 % under discharging at 2.0 mA/cm2; and the property of the negative electrode formed by unsymmetrical square wave …

Go to article

Inhibition Of N,N'-O-Phenylen-Bis(3-Methoxysalicylidenimine) On Copper In Halide Solutions, Hou-Yi Ma, Shen-Hao Chen, Zhen-Lan Quan, Lin Niu, Shu-Lan Li Feb 2000

Inhibition Of N,N'-O-Phenylen-Bis(3-Methoxysalicylidenimine) On Copper In Halide Solutions, Hou-Yi Ma, Shen-Hao Chen, Zhen-Lan Quan, Lin Niu, Shu-Lan Li

Journal of Electrochemistry

Inhibition of N,N'-o-phenylen-bis(3-methoxysalicylidenimine) (V-o-Ph-V) on corrosion and anodic disslution of copper in neutral NaCl and NaBr solutions was investigated in terms of potentiostatic steady-state polarization and A.C. impedance techniques. The inhibition mechanism of V-o-Ph-V to copper corrosion was interpreted in detail by comparing the electrochemical behaviors of copper in halide solutions with or without V-o-Ph-V. Besides, the inhibition effect of self-assembled V-o-Ph-V film on copper corrosion in NaCl was also studied.

Go to article

Study On Preparation Of Coarse And Fine γ-Lialo2 Mixed Powder Used For Mcfc Matrix, Hua-Xin Lin, Bao-Lian Yi, Lian-Ying Kong, En-Jun Zhang, Li Zhou, Feng-Xia Wang Feb 2000

Study On Preparation Of Coarse And Fine γ-Lialo2 Mixed Powder Used For Mcfc Matrix, Hua-Xin Lin, Bao-Lian Yi, Lian-Ying Kong, En-Jun Zhang, Li Zhou, Feng-Xia Wang

Journal of Electrochemistry

Coarse α-LiALO2 powder was transferred completely to γ-LiAlO2 at 900 ℃ for ten hours. Fine γ-LiALO2 powder was prepared by “chloride” synthesis. MCFC matrix was fabricated by mixing the coarse and fine γ-LiALO2 powder and by tape cast. The out'put voltage of the cell assembled with the matrix was 0.85 and 0.75 V respectively at 200 and 300 mA/cm 2, and power density was about 250 mW/cm2. The performance of the matrix fabricated with the mixed powder was obviously more advanced than that of the matrix fabricated with only coarse γ-LiALO2 powder.

Go to article

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan Feb 2000

Fabrication And Examination Of Reduced Temperatrue Solid Oxide Fuel Cell Using A Supported Thin Ysz Electrolyte Substrate, Yi-Huang Zhang, Yong-Lei Dong, Yi Jiang, Zhi-Gui Lu, Jing-Wang Yan

Journal of Electrochemistry

By using a cost-effective wet process,dense yttria stabilized zirconia (YSZ) films on Ni-YSZ anode substrates have been prepared successfully. The YSZ film was characterized to be around 10 μm in thickness, sufficiently dense, uniform and crack free. A single solid oxide fuel cell fabricated from the supported YSZ film electrolyte on the anode substrate and a LSM cathode prepared on the YSZ film was tested. The power density reached to 0.1 W/cm2 at 800 ℃, showing a reasonable performance. Further analysis on both electrodes shows that the anodic overpotential was much larger than IR drop (including YSZ resistance and …

Go to article

Applicability Of Ozone In Small Drinking Water Systems, Craig D. Adams, Justin Sutherland Jan 2000

Applicability Of Ozone In Small Drinking Water Systems, Craig D. Adams, Justin Sutherland

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of ozone in water treatment plants is expanding rapidly in the United States. Ozone offers excellent disinfection properties (including chlorine-resistant pathogens) and does not form trihalomethanes. Additionally, ozone can be used to achieve or control many other water quality parameters such as color, taste and odor, and inorganic and organic contaminant concentrations. Control of ozone's disinfection byproducts such as bromate (formed in high bromide waters) is required. This presentation will review the synergistic effects of ozone applicable to use in small water treatment plants.

Go to article

Dynamics Of Interfacial Polymers In Composites, Frank D. Blum, Wuu-Yung Lin Jan 2000

Dynamics Of Interfacial Polymers In Composites, Frank D. Blum, Wuu-Yung Lin

Chemistry Faculty Research & Creative Works

Much experimental and theoretical work has been done on the behavior of adsorbed polymers. However, not much work has focused on the dynamics, especially segmental dynamics, of the adsorbed polymers. This is especially true of filled polymer or composite systems as the interfacial layers in these systems are difficult to study with most techniques. NMR is not restricted to use in optically clear samples and its use in the characterization in the surface polymers has been reviewed. In our laboratory, we have found that deuterium NMR could be used to probe the segmental dynamics of adsorbed polymers. The position of …

Go to article

Chemical Oxidation Of Mtbe Under O2-Rich And O2-Limited Environments Coupled With Biological Degradation Of Oxidation Byproducts, J. Sutherland, B. Panka, Craig D. Adams, Joel Gerard Burken Jan 2000

Chemical Oxidation Of Mtbe Under O2-Rich And O2-Limited Environments Coupled With Biological Degradation Of Oxidation Byproducts, J. Sutherland, B. Panka, Craig D. Adams, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The H2O2/UV Advanced Oxidation Process (AOP) Was Investigated to Determine Byproduct Formation under Different Experimental Conditions (PH, Alkalinity, and H2O2/UV Dose). a Key Factor in the Efficiency of the AOP Was the Dissolved Oxygen Concentration. Gas Chromatography/mass Spectrometry (GC/MS) Analysis Was Used to Identify Byproducts Resulting from Oxidation under Oxygen-Rich and Oxygen-Limited Conditions. Resultant Oxidation Byproducts Were Analyzed for their Susceptibility to Biological Degradation. Biodegradation Rate Constants Were Determined and Modeled for the Primary Byproducts of the Advanced Oxidation Process. Inhibition Resulting from the Presence of Multiple Byproducts in a Biological System Was Investigated as Well. Effects of Process Parameters …

Go to article

The Effects Of Argon Dilution On Hydrogenated Amorphous Silicon Prepared By D.C. Plasma Glow Discharge : Optical And Infrared Spectroscopic Studies, Aniszawati Azis Jan 2000

The Effects Of Argon Dilution On Hydrogenated Amorphous Silicon Prepared By D.C. Plasma Glow Discharge : Optical And Infrared Spectroscopic Studies, Aniszawati Azis

Student Works (2000-2009)

Hydrogenated amorphous silicon (a-Si :H) films were prepared from the discharge of pure silane and silane diluted in argon using a home-built hori zontal direct current(d.c.) plasma glow discharge system. The effects of argon dilution of silane on the optical properties, chemical bonding properties, hydrogen content and microstructure parameter of the films produced were studied and analyzed. Film thickness, refractive index, optical energy gap and the Urbach tail bandwidth were obtained from the optical transmission spectra of the films while the H content and the microstructure parameter were derived from the Fourier Transform infra-red(FTIR) spectra of the films. The FTIR …

Go to article

Electroanalysis Using Differential Pulse Methods And Stripping Techniques., Enda Howard Jan 2000

Electroanalysis Using Differential Pulse Methods And Stripping Techniques., Enda Howard

Masters

Application of a differential pulse waveform to a microelectrode or a rotating disk electrode results in a peaked response for amperometric redox reactions. Based on these observations models were proposed and tested for these methods. Simulations of the models were carried out by inputting the relevant equations into Microsoft Excel. The microelectrode study revealed a good correlation between one model and the numerical derivative of the current following a linear sweep potential waveform. Experimentally the derivative can be obtained numerically following a linear sweep. The alternative differential pulse waveform requires more sophisticated equipment and the response can be affected by …

Go to article

Structural And Electrical Characterization Of A Novel Mixed Conductor: Ceo2 - Sm2O3 - Zro2 Solid Solution, W. Huang, P. Shuk, M. Greenblatt, M. Croft, Fanglin Chen, M. Liu Jan 2000

Structural And Electrical Characterization Of A Novel Mixed Conductor: Ceo2 - Sm2O3 - Zro2 Solid Solution, W. Huang, P. Shuk, M. Greenblatt, M. Croft, Fanglin Chen, M. Liu

Faculty Publications

solid solutions were synthesized for the first time by the hydrothermal method. The electrical properties of the solid solutions have been studied in air and under reducing conditions. Solid solutions with the fluorite structure were formed in all of the studied range of substitution after calcination at 1500°C. With increasing substitution up to 30 mol %, the electronic conductivity increases under a reducing atmosphere. The solid solution has good mixed electronic and ionic conductivity; the total conductivity is 0.42 S/cm at and 700°C with an estimated ionic conductivity of ca. .

Go to article

Infrared Spectoscopy And Electrical Conductivity Of Copper(Ii) 4-Aminobenzoate And Iondine-Doped Copper(Ii) 4-Aminobenzoate, Chang Fu Dee Jan 2000

Infrared Spectoscopy And Electrical Conductivity Of Copper(Ii) 4-Aminobenzoate And Iondine-Doped Copper(Ii) 4-Aminobenzoate, Chang Fu Dee

Student Works (2000-2009)

Copper(II) 4-aminobenzoate (CAB), prepared from copper(II) acetate monohydrate and 4-aminobenzoic acid, was a dark green powder. Fourier Transfonn lnfrared (FTIR) spectrum of CAB, recorded as KBr disc, indicated the presence of all bonds and functional groups expected of it, and the absence of hydrogen bonding. Its conductivity at room temperature was 4.2 x 10^-11 Scm^·1. The value increased as temperature decreased indicating metallic behaviour. Density of states at Fenni level, hopping distance, hopping energy and density of charge carriers calculated based on Mon's Variable Range Hopping model (VRH) are 2.65x 10^-22 (eV)^-1 cm^-3, 7.47 x 10^-8 cm, 0.02 eV and …

Go to article

Investigations On The Conductivity Of Organotin-Doped Polyethyleneoxide Polymer System, Lekshmi Sarojiniamma Jan 2000

Investigations On The Conductivity Of Organotin-Doped Polyethyleneoxide Polymer System, Lekshmi Sarojiniamma

Student Works (2000-2009)

Poly(ethylene oxide) (PEO) has been doped with selected organotin compounds. The organotin dopants used were triphenyltin thiocyanate (Ph3SnSCN) and tetramethylammonium dichlorotriphenylstannate [Ph3SnClr[Me4N)•. Tin incorporation in the polymers was established by several physical techniques. The infrared spectroscopic analysis of the Pb3SnSCN - doped electrolyte film showed bands at 2080-2050 cm.·' which are also given by pure Ph3SnSCN. Different concentrations of organotin doped electrolytes were prepared and conductivity studies on these were perfonned using impedance spectroscopy. From the measurements it was found that the best conductivity of 7.6xJ0.g Siem was obtained for the composition with PEO :dopant ratio of90:10 at room temperature. …

Go to article

Electrodeposition Of Copper On Polished Copper Electrode, Jia Tsung Ling Jan 2000

Electrodeposition Of Copper On Polished Copper Electrode, Jia Tsung Ling

Student Works (2000-2009)

This project studies the surface morphology of the copper deposit from three different bath solutions on polished copper (3.1 mm in diameter) electrode by using Scanning Electron Microscopy. The behaviour of glycine as an additive in a bath solution containing 0.3 M of copper (II) sulphate and 2.2 M of sulphuric acid was studied by using cyclic voltammetry. In this project, glycine did not involved directly in the reaction of CU²⁺/CU couple but increased the potential and current density of the plating process. However, glycine has the properties for inhibiting the deposition of copper onto the copper disc. Moreover, block …

Go to article

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan Nov 1999

Study On Electrochemical Reduction Properties Of Nitrobenzene, Chu-Na Ma, Wen-Kui Zhang, Hui Huang, Yong-Ping Gan

Journal of Electrochemistry

The electrochemical reduction characteristics of nitrobenzene was extensively investigated by using the techniques such as quasi-steady-state polarization, cyclic voltammetry, fast linear potential sweep method and chronoamperometry in this paper. The electroanalytic properties of Cu, Cu-Hg and Cu-Ni electrodes were evaluated. Based on the study of the transient steping behaviour of nitrobenzene to PAP, the reduction mechanism was discussed. The results showed that the transition steps existed on the electrochemical reduction of nitrobenzene in acidic solution, the reactant is also absorbed on electrodes surface. The control step in the reduction of nitrobenzene was ascribed to the diffusion of nitrobenzene and its …

Go to article

A Novel Reaction Region Moving Electrode System For Electrochemical Power Sources, Jin-Kua You, Que Tu, Zheng-Jian Wang, Jie Sun, Zu-Geng Lin Nov 1999

A Novel Reaction Region Moving Electrode System For Electrochemical Power Sources, Jin-Kua You, Que Tu, Zheng-Jian Wang, Jie Sun, Zu-Geng Lin

Journal of Electrochemistry

In most of practical rechargeable batteries, charging/discharging process is always concerned with phase-transformation in the solid state. Due to the irreversibility of the phase-transformation, the cyclic performance of the rechargeable batteries are limited. In this paper, a novel reaction-region moving counter electrode system is constructed in our laboratory. The electrode system is operated at room temperature and cycled in solid-liquid phase during charging/discharging processes. With this electrode, the metal-complexes are firstly deposited (i.e. charging process) on the nearest working electrode and gradually extended to those another working electrodes several centimeters away from the counter electrode. The deposite is dissolved again …

Go to article

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang Nov 1999

High Performance Proton Exchange Membrane Fuel Cells, Jing-Rong Yu, Bao-Lian Yi, Ming Han, Xiao-Liang Cheng, Zhi-Gang Shao, Jing-Xin Zhang

Journal of Electrochemistry

Proton-exchange membrane fuel cells(PEMFC) using a perfluorosulfonic acid proton exchange membrane as an electrolyte can simplify water and electrolyte management. In this paper, the effects of thickness of PEM on the performance of PEMFC were studied. The Nafion-112 PEM and low platinum loading E-TEK electrode yielded very high power density, of the order of 0.95 W/cm2. The energy-conversion efficiency, the degree of platinum utilization and stability for PEMFC using Nafion 112 and E-TEK electrode were also investigated.

Go to article

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu Nov 1999

Electro-Oxidation Of Phenol On Sno2/Ti Electrodes Prepared By Thermal Oxidation, Qing-Song Zhang, Hui-Huang Wu

Journal of Electrochemistry

A SnO2/Ti electrode prepared by thermal oxidation was used as the anode for galvanostatic electrolysis in acidic solution containing phenol, the time-dependances of phenol concentration, chemical oxygen demand in solution(COD) and instantaneous current efficiency were determined during electrolysis. The results show that with the SnO2/Ti anode instead of Pt, the COD significantly decreases at the same charge passage, and average current efficiency of oxidation increases by three times. The mechanism for phenol oxidation at two electrodes was discussed.

Go to article

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu Nov 1999

Investigation Of Sodium Hypophosphite Anodic Oxidizing Behavior In The Process Of Acid Electroless Nickel Deposition, Mei-Yuan Wang, Ya-Fei Kuang, Yan Xu

Journal of Electrochemistry

The anodic oxidizing behavior of sodium hypophosphite in the process of electroless nickle deposition (pH=5.5) was investigated with the linear potential sweep method and alternating current impedance. The results indicated that, the oxidation of NaH2PO2 was a complicated electrochemical process and affected by the concentration of NaH2PO2, the temperature of the bath, the sweep rate and the existence of nickel ion. The NaH2PO2 electrooxidation reaction was very likely preceded by heterogeneous interface transformation process, which might be the control step of the whole anodic process.

Go to article

Studies Of The Electrode Preparation Of Electrode From Lead Carbonate For Lead Acid Batteryⅰ. The Activation Of The Pme, Zhong-Xu Dai, Di-Hua Wang, Jun-Wei Jiang, Yun-Hong Zhou, Jin-Yun Zou Nov 1999

Studies Of The Electrode Preparation Of Electrode From Lead Carbonate For Lead Acid Batteryⅰ. The Activation Of The Pme, Zhong-Xu Dai, Di-Hua Wang, Jun-Wei Jiang, Yun-Hong Zhou, Jin-Yun Zou

Journal of Electrochemistry

Lead carbonate which was an intermediate product in lead hydrometallurgy without pollution of lead vapor and sulfur dioxide was selected as electrode material of lead-acid batteries. In the present work, the performances of PbO2/PbSO4 or PbSO4/Pb electrode transformed from PbCO3 have been investigated by powder microelectrode technique combined with cyclic voltammetry. The results show that the CV characteristics of either negative or positive electrode prepared from PbCO3 is as good as that of both electrodes made from lead oxide produced by mill machine,when a powder microelectrode with PbCO3 transformed into PbSO 4 …

Go to article

The Studies Of The (Photo) Electrochemical Character On The Electrodeposited Silver Indium Selenium Thin Films, Shao-Ai Xie, Xun-Nan Deng, You-Jin Kua Nov 1999

The Studies Of The (Photo) Electrochemical Character On The Electrodeposited Silver Indium Selenium Thin Films, Shao-Ai Xie, Xun-Nan Deng, You-Jin Kua

Journal of Electrochemistry

A photoelectrochemical cell (PEC) is constructed, using an AgInSe2 film photoanode made from electrodeposition and a platinium electrode in aqueous polyiodide or polysufide electrolyte. The Voc and Isc of PEC have been tested and measured, and the effect of chemical decoration on the photoanodes also studied.

Go to article

First Prev Next Last