Chemistry Commons^™

Electrochemistry Characteristic Of Carbon Steel Under Biofilm And Sulfide Film, Ze-Hua Dong, Xing-Peng Guo, Jia-Shen Zheng, Li-Ming Xu

Journal of Electrochemistry

Wire Beam Electrode (WBE) made of Q235 carbon steel was applied to study theheterogeneous corrosion beneath biofilm formed by Sulfate Reducing Bacteria (SRB) in cultureand sulfide film in solution with 1% NaCl and 300 mg/L⋅S^2-. The potential, galvanic density mapping, as well as polarization curve and Electrochemical Impedance Spectrum (EIS) were measured to predict the localized corrosion under biofilm and sulfide film. As a result, the mappingshowed the potential fluctuation on the WBE suface decreased over time due to the conductivityof the biofilm and sulfide film. Therefore, the potential mapping could not be a criterion of localized corrosion …

The Applications Of Confocal Raman Micro-Spectroscopy For Study Of Practical Electrode Materials, Yong Yang, Wei Chu, Jun-Min Nan, Xun-Guang Chen, Zu-Geng Lin

Journal of Electrochemistry

Some recent research work about applications of confocal Raman micro spectroscopy for study of practical electrode materials carried out in our lab has been briefly introduced. The examples include study of electrochemical Li⁺ intercalation process, characterization of surface oxide film on AB₅ type electrodes and passive film and pitting corrosion of Rebar electrodes.

Confocal Microprobe Raman Spectroscopy For Investigating The Electrochemical Interface, Bin Ren, Feng-Ming Liu, Xu-Feng Lin, Zhong-Qun Tian

Journal of Electrochemistry

The invention of the surface enhanced Raman spectroscopy (SERS) in the mid of 1970s, opened an entirely new and very promising area. However, it was found that SERS of practical application in electrochemistry can only be found on noble metal surfaces, such as Ag, Au and Cu that exhibit huge surface enhancement. This greatly limits the application of SERS in electrochemistry.

Raman And Afm Characterization Of Au And Cu Nanorod And Nanowire Arrays, Jing Tang, Jian-Lin Yao, Kuan-Hong Xue, De-Yin Wu, Long-Gang Lin, Yu-Xiong Jiang, Bin Ren, Xin Xu, Bing-Wei Mao, Zhong-Qun Tian

Journal of Electrochemistry

Recently metal nanowires (nanorods) have aroused tremendous interest because of their novel properties and potential applications in wide fields Many two-dimensional nanowire arrays of semiconductors and metals with different diameter and length have been made by using template synthesis method.

Surface-Enhanced Raman Spectroscopy Of Metallotetraphenyl Porphyrins Adsorbed On Ag2O And Silver Colloids, Ying-Hui Zhang, Dong-Ming Chen, Tian-Jing He, Fan-Chen Liu

Journal of Electrochemistry

The biological significance of porphyrins and metalloporphyrins has stimulated intensive investigations on these compounds for many years. On the other hand, porphyrins and metalloporphyrins also have extensive applications in many other fields such as chemical modified electrodes, organic photovoltaic devices and biomimetic catalysis. The adsorption behavior and chemical reactions of metalloporphyrins on surfaces or interfaces are very important for these applications.

Electrochemical Impedance Spectroscopy Studies On Inhibitive Performance Of Aluminum Triphosphate Pigment, Yong-Gui Liao, Zhi-Jun Gu, Zhi-Gang Zhang, Qi-Long Guo, Fang-Teng Su

Journal of Electrochemistry

The epoxy coatings on A₃ steel sheets containing calcite or aluminum triphosphate (AlTP), were investigated by Electrochemical Impedance Spectroscopy (EIS). The results showed that calcite pigment is not an inhibitor, but an extender pigment, and that AlTP pigment can considerably enhance the protective performance of epoxy coating. The triphosphate ion at the interface between the steel substrate and the coating can complex with the corrosion product, such as ferric and ferrous ions, and form a compact protective film which effectively separates the steel substrate from the aggressive media.

A Study On The Performance Of Matrix Prepared By Tape Cast And Its Molten Carbonate Fuel Cells (Mcfcs), Hua-Xin Lin, Bao-Lian Yi, Li Zhou, Chang-Qing He, Lian-Ying Kong, En-Jun Zhang

Journal of Electrochemistry

The matrix prepared with γ-LiAlO₂ powder and by tape cast displayed higher ability of preventing from gas cross over and lower ohmic polarization. The voltages of the stack (three cells, 122 cm²) stacked with the matrix were 2.02 and 1.78 V at 200 and 246 mA/cm², respectively, and the output power reached 53.4 W. The cell (28 cm ²) voltages were 0.85 and 0.75 V at 200 and 300 mA/cm², respectively, and the output power was about 6.6 W. Compensating the shrinkage of matrix in stacking cells promoted the enhancement of the …

Rhodium As A Ubiquitous Substrate For Surface Enhanced Raman Spectroscopy, Bin Ren, Xu-Feng Lin, Zhong-Qun Tian

Journal of Electrochemistry

Raman Spectroscopy is a powerful technique in characterizing the molecular structure at the molecular level. However, only after the discovery of surface enhanced Raman scattering (SERS) effect, has it become one of the most widely used technique in surface sciences. The limitation that only Ag, Au and Cu can produce prominent SERS signal of practical significance, greatly hinders the application of this technique. Recently our group has made great progress in extending SERS to pure transition metal surfaces, such as Pt, Ni, Fe, Co etc.

Two-Dimensional Surface Raman Imaging Of A Roughened Iron Electrode In Saline Water, Pei-Gen Cao, Jian-Lin Yao, Jun-Wei Zheng, Bin Ren, Ren-Ao Gu, Zhong-Qun Tian

Journal of Electrochemistry

The analysis of the composite and distribution of iron oxide due to pit corrosion in saline solutions (3.4% NaCl) is of great importance. Many electrochemical methods, XPS, and other photoelectronic techniques have been applied to this domain. Surface enhanced Raman scattering (SERS) spectroscopy can provide the vibrational information of surface species with high sensitivity and is very useful in the study of surface chemistry of iron. Notwithstanding, the application of SERS in iron corrosion is hampered for its SERS-inactivity. Efforts have been devoted to extend the use of SERS to the study of iron.

The Charge Transfer Effect Of Sers Induced By The Electrochemical Hydrogen Evolution Reaction, Feng-Ming Liu, Qi Han, Yan-Xia Chen, Qi-Ling Zhong, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

As one of the important mechanisms of SERS, the charge transfer (CT) enhancement requires the strong interaction of the adsorbed species with the substrate in order to permit the transition of charge between the metal Fermi level (energy state) and the molecular orbital. The high enhancement needs the match of the energy gap between the Fermi level (or surface state) and the orbital energy level of the adsorbed molecules with the energy of the incident light. The electrode Fermi level is usually adjusted by the applied potential to satisfy the CT resonance. For the electrochemical reaction process, the frontier orbital …

How Can Direct Mthanol Fuel Cell Benefit From Carbonate Media, Lin Zhuang, Yang Wang, Jun-Tao Lu

Journal of Electrochemistry

The kinetics of methanol oxidation and oxygen reduction in 0.5 mol/L K₂CO₃ were compared with those in 0.5 mol/L H₂SO ₄. Experiments revealed that carbonate media could be more beneficial to direct methanol fuel cell(DMFC). Firstly, both electrode reactions show better performance in the carbonate than in the acid; secondly, materials other than noble metals become possible to be used as the anodic and cathodic catalysts; thirdly, the potential dectease caused by methanol crossover could be depressed by using metal oxide catalysts not stable in acid, such as MnO₂.

Synthesis Of Limn2O4-ΔClΔ Cathode Material By Like-Sol-Gel Methode, Zhao-Yong Chen, Yi He, Xing-Quan Liu, Zhi-Jie Li, Zuo-Long Yu

Journal of Electrochemistry

LiMn₂O_4-δCl_δ was synthesized by like sol gel methode, with calculated LiOH·H₂O, Mn(No₃)₂⋅6H₂O and LiCl·H₂O, and made electrochemical test with these compounds as positive materials. Result demostrated that LiMn₂O_4-δCl_δ cathode material has exellent stability and nearly no capacity loss after reaching stability.

Raman Spectroelectrochemical Study On Bioactive Molecules, Xiao-Wei Cao, Hai-Feng Yang, Zhe Su Meng Xiao Yun Wang, Xia-Qin Wu, Zong-Rang Zhang

Journal of Electrochemistry

Electron-transfer reaction is known to be one of the key reactions for generating biological functions. Mechanism revelation at a molecular level of such kind reactions is to be very helpful for us to understand life essence. In fact, surface enhanced Raman scattering (SERS) is one of the most powerful tools for the study on metal-electrolyte and metal-vacuum interfaces since 1970's. Moreover, Raman spectroscopic study in enzymology has provided attractive results during last twenty-five years.

In Situ Raman Spectroelectrochemical Characterization Of The Prussian Blue/Platinum Modified Electrode, Xiao-Wei Cao, Rong Wang, Gui-Hua Wang, Zong-Rang Zhang

Journal of Electrochemistry

Prussian Blue is known to be deposited electrochemically on the electrode surface, producing a dense redox active layer. Since the Prussian Blue modified electrode was first reported by Neff in 1978, different in situ spectroelectrochemical techniques have been widely used to investigate its electrochemical mechanism. But no research work related to the in situ Raman spectroscopic studies on it has been reported. In this paper we try to characterize the nature of thin Prussian Blue films on platinum substrates with in situ Raman spectroelectrochemical technique.

Adsorption Behavior Of Co At The Ultrathin Rh And Pt Film Electrodes, Yong Xie, Xiao-Qin Li, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Pt group metals have been widely used in catalysis such as hydrogenation of organic compounds and the oxidation of carbon monoxide. The information about CO adsorption on the Pt group surfaces and the influence of other surface species, such as hydrogen and CO₂ will be greatly helpful to elucidate the adsorption behavior of CO on Pt group metal surfaces and get a deeper understanding of catalytic mechanisms of Pt group metals. Surface enhanced Raman spectroscopy (SERS) has been becoming an increasingly important means to characterize the electrochemical metal solution interface over the past two decades. Our laboratory has successfully …

Adsorption And Oxidation Of Ethanol On Nm-Pt/Gc Electrode Ii. Eqcm And In-Situ Ftir Spectroscopic Studies In Acid Media, Guo-Liang Chen, Sheng-Pei Chen, Zhi-You Zhou, Chun-Hua Zhen, Shi-Gang Sun

Journal of Electrochemistry

The adsorption and oxidation of ethanol on nm Pt/GC electrode in acid solutions containing 0.1 mol·L ^-1 H₂SO₄ +0.1 mol·L ^-1 CH₃CH₂OH was investigated by using cyclic voltammetry, EQCM and in situ FTIR spectroscopy. The experimental results demonstrated that the oxidation of CH₃CH₂OH is closely relaed to solution acidity and oxygen species on electrode surface; CH₃CH₂OH was oxidized on nm Pt/GC electrode in acidic media via a dual path reaction mechanism, i.e . CH₃CH₂OH may be oxidized into CO₂ through …

The Photoelectrochemistry Of Tio2-Polyaniline Composite Film, Huai-Guo Huang, Zhi-Xin Zheng, Jin Luo, Hong-Ping Zhang, Ling-Ling Wu, Zhong-Hua Lin

Journal of Electrochemistry

A TiO₂ and polyaniline (PANI) composite film was obtained by electrochemical methods. The SEM image of the composite film showed that the PANI film is almost completely covered with TiO₂ efficiency. The spectra of photocurrent for the TiO₂-PANI composite film were different from these of TiO₂ film photosensitized by PANI. The bandgap energy of TiO₂ film on partially oxidized PANI film was determined as 3.0 eV by the threshold energy of photocurrent band for TiO₂. The spectra of photocurrent for partially oxidized PANI film electrode suggested that it has the characteristics of …

Catalytic Effect Of Cl- On Electrodeposition Of Binary Zinc Alloys With Iron Group Metals, Ren-He Yin, Zheng-Hua Fang, Wei-Min Cao, A.Za Karia, Rong-Ming Zhou

Journal of Electrochemistry

Zinc iron group metal alloys were deposited under coulostatic (10C⋅cm^-2) at 40 ℃ chloride baths. The deposited alloys were quantitatively analyzed by Atomic Absorption Spectrometry. The current efficiency, percent content and partial polarization curves were obtained by the results. The morphology of the deposits was observed by means of Scanning Electron Microscopy(SEM). We observe that the electrodeposition of zinc iron group metal alloys is one of the best known examples of anomalous codeposition. We found the catalytic effect of Cl^- on the electrodeposition behavior of iron group metal. Overpotential of iron group metal droped abruptly at high …

Effects Of External Electric Field On The Interfacial Properties Of Weakly Dipolar Fluid, V. B. Warshavsky, T. V. Bykov, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

In the framework of modified mean-field density-functional theory, effects of a uniform electric field on the interfacial properties of a model dipolar fluid are studied. Both density and orientational order-parameter profiles of the planar vapor-liquid interface are obtained as a function of the field strength. For the dipolar fluids with reduced dipole moment μ₀^*0^*E*/T*!1) can shift the surface tension by few percent. We also find that the electric field actually reduces the thermodynamical surface tension but enhances the mechanical surface tension at the equimolar dividing surface. To detect these field effects on …

Report Of The State Nuclear Safety Advisor Submitted To The Governor And 120th Legislature As Of January 15, 2001, Paula M. Craighead

Maine Collection

Report of the State Nuclear Safety Advisor submitted to the Governor and 120th Legislature As of January 15, 2001

Paula M. Craighead, State Nuclear Safety Advisor, Executive Department, Maine State Planning Office, Augusta, Maine, 2001.

Contents: Introduction and Executive Summary / I. Maine Yankee Decommissioning / II. Portsmouth Naval Shipyard (PNS) / III. Low-Level Radioactive Waste (LLRW) / IV. High Level Radioactive Waste / V. Transport Routes and Safety Response / VI. Shipments / VII. Status of Federal and State Legal and Administrative Proceedings / References and Resources / Glossary

The Effect Of Aluminium Oxide And Cerium Oxide As Dispersoids In Chitosan-Lithium Acetate Complexes, Hoi Mien Leow

Student Works (2000-2009)

In this study, chitosan with 85% deacetylation was used with Ni(OAc)₂·2H₂O as doping salt and Al₂O₃, or CeO₂ as dispersoid. They were mixed in certain weight percentages and dissolved in 100ml of 0.5% acetic acid solution. These solutions were poured into petri dishes and left at room temperature for film formation. Infrared Spectroscopy has shown that there is interaction between chitosan and LiOAc with and without dispersoid. The peaks are shifted. broadened. split and differs in intensity. The electrical conductivity of all samples was calculated using the bulk resistance value obtained from the complex admittance plot. The highest electrical conductivity …

Preparation And Characterization Of Lithiated Cathode Materials For Lithium Batteries, Shanti Navaratnam

Student Works (2000-2009)

Four different cathode materials, LiNiO₂, LiCoO₂, LiCo₀.₂ Ni₀.₈O₂ and LiCo₀.₄, Ni₀.₆O₂ were synthesized by sol - gel technique. The prepared materials were characterized X-ray diffraction pattern, FT-IR and cyclic voltammetry. X-ray diffraction pattern shows crystallinity of materials, increases with higher calcination temperature. From FT- IR studies, it was shown, that the purity of sample also increased with prolong heating at higher temperatures. It was possible to obtain pure and highly crystalline LiNiO₂ after heating for fourteen hours at 800°c. Cyclic voltammetry shows the four prepared materials are suitable for fabrication of cathode, as lithium ions can intercalate and de-intercalate. LiNiO₂ …

Infared Spectroscopy And Electrical Conductivity Of Copper(Ii) Cinnamate And Iodine-Doped Copper(Ii) Cinnamate, Kumar Krishnan

Student Works (2000-2009)

Copper(II) cinnamate (CC) was prepared from copper(II) acetate monohydrate and cinnamic acid. It was a light-blue powder. The Fourier Transform Infrared (FTIR) spectrum of CC, recorded as potasium bromide (K.Br) disc, indicated the presence of all bonds and functional groups expected of it and showed that it exist as an equal mixture of cis- and trans- isomers. The conductivity of CC at room temperature was 5.22 x 10⁻¹¹Scm⁻¹. It showed metallic behaviour in the temperature range 78-300 K, and its conduction mechanism obeyed Mott's variable range hopping (VRH) model in the same temperature range. The density of states at Fermi …

Dynamics Of Polyacrylates In Concentrated Chloroform Solutions, Frank D. Blum, Raj B. Durairaj

Chemistry Faculty Research & Creative Works

The dynamics of polymers in polymer solutions have not been probed in great enough detail to provide a coherent picture of the behavior of these polymers, especially in more concentrated solutions. To help understand this behavior further, we have prepared a series of backbone-labeled polymers including poly(n-butyl acrylate)-d1 (PNBA). These provide a basis for comparison of the behavior among a group of related polymers. The dynamics have been probed by using deuterium relaxation times. Since the relaxation times are relatively fast and the quadrupolar relaxation mechanism is well understood, data from this technique provide a convenient means for comparison of …

Glass Transition Behavior Of Pmma Thin Films, Moses T. Kabomo, Frank D. Blum

Chemistry Faculty Research & Creative Works

In the last decade there has been an increased interest in the study of the properties of supported thin polymer films. This has been prompted by the incorporation of thin films into device applications and many other technologies. Although not without controversy, a large body of experimental work indicates departures from bulk behavior by thin films. Strong evidence from both theoretical and experimental work shows that the interaction of polymer with a substrate alters the polymer conformation and mobility. A variety of techniques has been employed to probe the mobility of thin supported polymer films. Some of these techniques indirectly …

Graduated Segmental Mobility In Polymer Layers On Silica, Frank D. Blum, Crystal E. Porter, Wuu-Yung Lin

Chemistry Faculty Research & Creative Works

The behavior of thin polymer layers on oxide substrates has gotten a great deal of attention as the size of materials, and hence polymer films, has gotten smaller. Indeed, the properties of adsorbed polymers are such that they can be different from those of bulk polymers, especially when the films are very thin. A wide variety of studies have been made on adsorbed polymers and sometimes the results seem contradictory. One of the properties often measured in thin films is the apparent glasstransition temperature, Tg. In principle, many techniques are sensitive to phenomenological changes occurring around Tg and, therefore, can …

Thermal Analysis Of Ultrathin Ps-R-Pmma Copolymer Films On Silica, Bing Zhang, Frank D. Blum

Chemistry Faculty Research & Creative Works

Composite materials represent a major part of man-made materials that are used in many applications. The interaction of polymers with surfaces plays a crucial role in the final properties of these materials and, by understanding the surface processes and adsorption mechanisms, better systems can be designed. Therefore, the behavior of polymer molecules at interfaces has been the topic of many studies in recent years and a rough picture has been obtained. Keddie et al. Obtained experimental results showing the dependence of the glass transition temperature (Tg) on the thickness of supported polystyrene films using ellipsometry. Later, they also investigated supported …

Resonant Energy Transfer From Argon Dimers To Atomic Oxygen In Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

The emission of atomic oxygen lines at 130.2 and 130.5 nm from a microhollow cathode discharge in argon with oxygen added indicates resonant energy transfer from argon dimers to oxygen atoms. The internal efficiency of the vacuum-ultraviolet (VUV) radiation was measured as 0.7% for a discharge in 1100 Torr argon with 0.1% oxygen added. The direct current VUV point source operates at voltages below 300 V and at current levels of milliamperes.

Dynamics Of Poly(Vinyl Acetate)-D₃ On Silica, Robert D. O'Connor, Frank D. Blum, Gu Xu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Poly(vinyl acetate) (PVAc) is an important polymer in applications because of both its bulk and surface characteristics. Its chain architecture gives it a low Tg and, generally, good qualities for processing and applications, which include paints, adhesives, thin films and surface coatings. In this study, we investigate the surface dynamics of PVAc absorbed onto silica with deuterium nuclear magnetic resonance (2H NMR). For dynamics studies, 2H NMR is an excellent technique because it uses an innocuous probe that can report on correlation times (τc) from approximately 10-8 s to 10 s. We report the use of two-dimensional exchange NMR (2D-X) …

Xenon Excimer Emission From Pulsed Microhollow Cathode Discharges, M. Moselhy, R. H. Stark, K. H. Schoenbach, U. Kogelschatz

Bioelectrics Publications

By applying electrical pulses of 20 ns duration to xenon microplasmas, generated by direct current microhollow cathode discharges, we were able to increase the xenon excimer emission by more than an order of magnitude over direct current discharge excimer emission. For pulsed voltages in excess of 500 V, the optical power at 172 nm was found to increase exponentially with voltage. Largest values obtained were 2.75 W of vacuum-ultraviolet optical power emitted from a single microhollow cathode discharge in 400 Torr xenon with a 750 V pulse applied to a discharge. Highest radiative emittance was 15.2 W/cm². The …