Chemistry Commons^™

Data-Driven Viewpoint For Developing Next-Generation Mg-Ion Solid-State Electrolytes, Fang-Ling Yang, Ryuhei Sato, Eric Jian-Feng Cheng, Kazuaki Kisu, Qian Wang, Xue Jia, Shin-Ichi Orimo, Hao Li

Journal of Electrochemistry

Magnesium (Mg) is a promising alternative to lithium (Li) in solid-state batteries due to its abundance and high theoretical volumetric capacity. However, the sluggish Mg-ion conduction in the lattice of solid-state electrolytes (SSEs) is one of the key challenges that hamper the development of Mg-ion solid-state batteries. Though various Mg-ion SSEs have been reported in recent years, key insights are hard to be derived from a single literature report. Besides, the structure-performance relationships of Mg-ion SSEs need to be further unraveled to provide a more precise design guideline for SSEs. In this Viewpoints article, we analyze the structural characteristics of …

Kai Wu, The Editorial Board Member Of Journal Of Electrochemistry And Chief Scientist Of Catl, Receives The National Science And Technology Progress Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Sorbitol-Electrolyte-Additive Based Reversible Zinc Electrochemistry, Qiong Sun, Hai-Hui Du, Tian-Jiang Sun, Dian-Tao Li, Min Cheng, Jing Liang, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

The unstable zinc (Zn)/electrolyte interfaces formed by undesired dendrites and parasitic side reactions greatly hinder the development of aqueous zinc ion batteries. Herein, the hydroxy-rich sorbitol was used as an additive to reshape the solvation structure and modulate the interface chemistry. The strong interactions among sorbitol and both water molecules and Zn electrode can reduce the free water activity, optimize the solvation shell of water and Zn²⁺ ions, and regulate the formation of local water (H₂O)-poor environment on the surface of Zn electrode, which effectively inhibit the decomposition of water molecules, and thus, achieve the thermodynamically stable …

Professor Yong Yang, The Editorial Board Member Of Journal Of Electrochemistry, Is Elected As A Fellow Of The Electrochemical Society, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

Activity: Students Find Conceptual Errors In Ai Output, Janie Brennan

Generative AI Teaching Activities

Instructor asks ChatGPT questions related to a key concept to find one where ChatGPT has conceptual errors. Ask students to find the errors and explain them.

Fundamental Limits In Measuring The Anisotropic Rotational Diffusion Of Single Molecules, Weiyan Zhou, Tingting Wu, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Many biophysical techniques, such as single-molecule fluorescence correlation spectroscopy, Förster resonance energy transfer, and fluorescence anisotropy, measure the translation and rotation of biomolecules to quantify molecular processes at the nanoscale. These methods often simplify data analysis by assuming isotropic rotational diffusion, e.g., that molecules wobble within a circular cone. This simplification ignores the anisotropy present in many biological contexts that may cause molecules to exhibit different degrees of diffusion in different directions. Here, we loosen this assumption and establish a theoretical framework for describing and measuring anisotropic rotational diffusion using fluorescence imaging. We show that anisotropic wobble is directly quantified …

Tribocorrosion And Metal Release From Austenitic Stainless Steels 304 And 201 In Simulated Cassava Food Contact, Robert Addai, Temitope E. Olowoyo, Thalia E. Standish, Jeffrey Daniel Henderson, Ubong Eduok, Yolanda Hedberg

Chemistry Publications

Cassava is the third most significant calorie source in the tropics. Its processing has changed from traditional methods to stainless steel processing machines. This study investigated the influence of cassava on metal release from two common stainless steels, ASTM 304 and 201, with and without friction, and on tribocorrosion (multianalytically) of 304. Cassava was relatively corrosive and hindered repassivation of the surface oxide of stainless steel, but it also acted as a lubricant against mechanical friction. The combined action of friction and cassava caused a significant increase in iron, chromium, nickel, and manganese release from the stainless steels (30–35- fold …

Poly(Thioether) Thermosets With Gated Photodegradation, Surabhi Jha

Dissertations

Photodegradable polymer networks are attractive due to the precise spatiotemporal control and large-area applicability of light. Chemical linkages that enable these polymer networks to be photo-responsive, also hinder their applicability in ambient light. Photostable and photodegradable networks have recently been reported to overcome this challenge by combining other stimuli with light for degradation. We report the design of a network that responds to a simultaneous, dual stimulus for photodegradation. We design poly(thioether acetal) networks with benzylidene acetal moieties that are known to undergo β-scission in the presence of free thiols. By blocking these free thiols with a thermally labile protecting …

Response To Replication Stress And Maintenance Of Genome Stability By Wrn, The Werner Syndrome Protein, David K. Orren, Amrita Machwe

Markey Cancer Center Faculty Publications

Werner syndrome (WS) is an autosomal recessive disease caused by loss of function of WRN. WS is a segmental progeroid disease and shows early onset or increased frequency of many characteristics of normal aging. WRN possesses helicase, annealing, strand exchange, and exonuclease activities and acts on a variety of DNA substrates, even complex replication and re- combination intermediates. Here, we review the genetics, biochemistry, and probably physiological functions of the WRN protein. Although its precise role is unclear, evidence suggests WRN plays a role in pathways that respond to replication stress and maintain genome stability particularly in telomeric regions.

Carbon-Based Nanocomposite Membranes For Membrane Distillation: Progress, Problems And Future Prospects, Chhabilal Regmi, Yuwaraj K. Kshetri, S. Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

The development of an ideal membrane for membrane distillation (MD) is of the utmost importance. Enhancing the efficiency of MD by adding nanoparticles to or onto a membrane’s surface has drawn considerable attention from the scientific community. It is crucial to thoroughly examine state-of-the-art nanomaterials-enabled MD membranes with desirable properties, as they greatly enhance the efficiency and reliability of the MD process. This, in turn, opens up opportunities for achieving a sustainable water–energy–environment nexus. By introducing carbon-based nanomaterials into the membrane’s structure, the membrane gains excellent separation abilities, resistance to various feed waters, and a longer lifespan. Additionally, the use …

Surface Structures And Properties Of High-Voltage Licoo2: Reviews And Prospects, Jian-Jun Fang, Yu-Hao Du, Zi-Jian Li, Wen-Guang Fan, Heng-Yu Ren, Hao-Cong Yi, Qing-He Zhao, Feng Pan

Journal of Electrochemistry

Nowadays, the development of high-voltage LiCoO₂ (lithium cobalt oxide, LCO) cathodes has attracted the widespread attention from both the academic and industry fields. Among the multiple concerns, researches on the surface issues would provide the most effective performance optimization pathway for the synthesis of high-voltage LCO. In this work, the issues of high-voltage LCO, including the phase transitions and crack formation, the oxygen redox related issues and side reactions, as well as the surface structure degradation, have been systematically reviewed. Then, we further clarify the surface modulations, and the interplay between the surface modulation and electrolyte tuning. Finally, we …

In Situ Diffuse Reflectance Spectroelectrochemistry Of Cathode Materials In Lithium-Ion Batteries, Lu-Lu Chen, Hao-Ran Li, Wei-Yi Liu, Wei Wang

Journal of Electrochemistry

Developing in situ spectroelectrochemistry methods, which can provide detailed information about species transformation during electrochemical reactions, is very important for studying electrode reaction mechanisms and improving battery performance. Studying real-time changes in the surface of electrode materials during normal operation can be an effective way to assess and optimize the practical performance of electrode materials, thus, in situ and in operando characterization techniques are particularly important. However, batteries are hard to be studied by in situ characterization measurements due to their hermetically sealed shells, and there is still much room for battery characterizations. In this work, a specially designed battery …

Molybdenum Disulfide And Carbon Nanotubes Composite Electrode For Electrochemical Conversion Of Salinity Gradient Energy, Jia-Jun Li, Wei-Bin Zhang, Xin-Yu Liu, Jing-Lei Yang, Yi Yin, Ze-Qin Yang, Xue-Jing Ma

Journal of Electrochemistry

The ocean accounts for 97% of the total water resources on earth, covering over 70% of the map's surface area. With the continuous consumption of non-renewable energy sources such as fossil fuels and the rapid development of renewable energy, humans are increasingly paying attention to the utilization of ocean resources. Ocean energy includes tidal energy, wave energy, temperature difference energy, and salinity gradient energy. Salinity gradient energy is the energy generated by the interaction of seawater and fresh water, which is the ocean energy existing in the form of chemical energy. This energy is mostly generated in estuaries. The osmotic …

Activity Descriptors As Tools For Designing Highly Efficient Electrocatalysts For Water Splitting, Aya Gomaa

Theses and Dissertations

There is an uprising urge to design efficient, active, and durable catalysts to achieve sustainable hydrogen production. The unambiguity of which material should be used pushed the scientific community to devote enormous efforts in exploring different elements with different ratios on trial and error bases. However, the bridge between the theoretical calculation and the experiments introduced a new realm of designing efficient catalysts by introducing the concept of activity descriptors. In the first part of the thesis, the ability to convert waste stainless steel (SS) 316L meshes into highly efficient and durable oxygen evolution reaction (OER) catalysts is demonstrated. The …

Hatt-Flow: Hierarchical Attention-Flow Mechanism For Group-Activity Scene Graph Generation In Videos, Naga Venkata Sai Raviteja Chappa, Pha Nguyen, Thi Hoang Ngan Le, Page Daniel Dobbs, Khoa Luu

Electrical Engineering and Computer Science Faculty Publications and Presentations

Group-activity scene graph (GASG) generation is a challenging task in computer vision, aiming to anticipate and describe relationships between subjects and objects in video sequences. Traditional video scene graph generation (VidSGG) methods focus on retrospective analysis, limiting their predictive capabilities. To enrich the scene-understanding capabilities, we introduced a GASG dataset extending the JRDB dataset with nuanced annotations involving appearance, interaction, position, relationship, and situation attributes. This work also introduces an innovative approach, a Hierarchical Attention–Flow (HAtt-Flow) mechanism, rooted in flow network theory to enhance GASG performance. Flow–attention incorporates flow conservation principles, fostering competition …

In Situ And 2d And 3d In Silico Redox Cycling Studies For Design Optimization Of Coplanar Arrays Of Microband Electrodes In A 70 Μm × 100 Μm Electroactive Footprint, Miguel Angel Abrego Tello, Mahsa Lotfi Marchoubeh, Ingrid Fritsch

Chemistry & Biochemistry Faculty Publications and Presentations

Optimization of redox-cycling currents was performed by adjusting the height (sidewalls, h), width (w), and length (l) of band electrodes and their spacing (w_gap) in coplanar arrays restricted to a small-electroactive window of 70 × 100 μm. These arrays can function in μL-volumes for chemical analysis (e.g., in-vivo dopamine detection using probes). Experiments were conducted with an array of five electrodes (NE = 5), w = 4.3 μm, w_gap = 3.7 μm, h = 0.150 μm, and l = 99.2 μm. Reasons for …

Modeling Charging Current Dynamics At Microelectrodes And Their Interfaces With Electrolyte And Insulators With A Focus On Microfabricated Gold Microband Electrodes On An Su-8 Substrate, Miguel Angel Abrego Tello, Mahsa Lotfi Marchoubeh, Ingrid Fritsch

Chemistry & Biochemistry Faculty Publications and Presentations

The suitability of electrochemical methods for quantitative measurements at microdevices is influenced by the relatively large electrode-insulator interface-to-electrode area ratio, greatly impacting charging dynamics due to interactions among electrolyte, conductor material, and insulator layers. The resulting charging current can overwhelm the faradaic current from redox chemistry. The device studied here features a 70 μm × 100 μm electroactive window, hosts gold coplanar microband electrodes, and is insulated by SU-8, which serves as both overlayer and substrate. The overlayer defines the electroactive length and isolates the leads of the electrodes from the sample solution. Cyclic voltammetry in 0.10 M …

Predicting Rheology Of Uv-Curable Nanoparticle Ink Components And Compositions For Inkjet Additive Manufacturing, Cameron D. Lutz

Master's Theses

Inkjet additive manufacturing is the next step toward ubiquitous manufacturing by enabling multi-material printing that can exhibit various mechanical, electronic, and thermal properties. These characteristics are realized in the careful formulation of the inks and their functional materials, but there are many constraints that need to be satisfied to allow optimal jetting performance and build quality when used in an inkjet 3-D printer. Previous research has addressed the desirable rheology characteristics to enable stable drop formation and how the metallic nanoparticles affect the viscosity of inks. The contending goals of increasing nanoparticle-loading to improve material deposition rates while trying to …

Development And Applications Of Flexible Piezoelectric Nanogenerators Using Batio3, Pdms, And Mwcnts For Energy Harvesting And Sensory Integration In Smart Systems, Islam Uddin Shipu, Dipasree Bhowmick, Nondon Lal Dey

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

Mechanical energy is a versatile and accessible green energy source, increasingly harnessed to power small-scale devices via innovative flexible piezoelectric nanogenerators (F- PNGs). These devices convert mechanical energy into electricity using lightweight materials such as Barium Titanate (BaTiO3), poly dimethyl siloxane (PDMS), and multi-walled carbon nanotubes (MWCNTs). In this design, BaTiO3 nanoparticles were embedded in a composite film with PDMS and MWCNTs, sandwiched between two copper electrodes. The BaTiO3/PDMS/MWCNT composite PENGs, synthesized for this study, produce an output voltage of ∼8 V through periodic cyclic beating. This represents an increase of about 16% compared to the PENGs without MWCNT doping. …

Photodegradation Of Microplastics Through Nanomaterials: Insights Into Photocatalysts Modification And Detailed Mechanisms, Yiting Xiao, Yang Tian, Wenbo Xu, Jun Zhu

Biological and Agricultural Engineering Faculty Publications and Presentations

Microplastics (MPs) pose a profound environmental challenge, impacting ecosystems and human health through mechanisms such as bioaccumulation and ecosystem contamination. While traditional water treatment methods can partially remove microplastics, their limitations highlight the need for innovative green approaches like photodegradation to ensure more effective and sustainable removal. This review explores the potential of nanomaterial-enhanced photocatalysts in addressing this issue. Utilizing their unique properties like large surface area and tunable bandgap, nanomaterials significantly improve degradation efficiency. Different strategies for photocatalyst modification to improve photocatalytic performance are thoroughly summarized, with a particular emphasis on element doping and heterojunction construction. Furthermore, this review …

A Molecular Dynamics Study On The Destruction Mechanism Of Per And Polyfluoroalkyl Substances Due To Ultrasound Technology, Bruno Bezerra De Souza

Dissertations

Per- and polyfluoroalkyl substances (PFAS) are a group of stable synthetic chemicals that are highly persistent and harmful pollutants to the environment and human health. PFAS have caused a strong public and regulatory response due to their ubiquitous presence in the environment and toxicity to humans. The application of ultrasound is one of the most effective treatment technologies for the mineralization of PFAS in contaminated water. However, this technology is treated as a black box causing the inability to be optimized. Therefore, there is a pressing need to investigate the intricate dynamics of PFAS degradation under ultrasound to unlock its …

Molecular-To-Continuum Scale Modeling Of Aerosols: Atmospheric Application And Beyond, Ella Ivanova

Dissertations

Aerosol modeling is critical for various applications, such as climate forecasting, air quality, and human health impact assessment. During their lifetime, aerosols undergo a complex evolution, usually divided into several stages — formation, processing, transport, and removal — that occur on different scales. Thus, the choice of modeling methods depends on the stage considered. For example, certain stages of particle formation may require nano-scale modeling while aerosol-cloud interactions span from microscale to mesoscale. This study examines the modeling of aerosol behavior over a wide range of scales, from nano to microscale, with implications to mesoscale.

This dissertation focuses on two …

Nickel-Catalyzed Α-Arylation Of Α-Cyanoacetates Enabled By Electrochemistry, Zi-Meng Li, Zhang-Jian Li, Anat Milo, Ping Fang, Tian-Sheng Mei

Journal of Electrochemistry

β-Amino acids have a wide range of applications in the field of pharmaceuticals. Utilizing a combination strategy of nickel catalysis and paired electrolysis, a catalytic α-arylation protocol of carbonyl compounds has been developed. This protocol affords various a-aryl-a-cyanoacetates, which can be reduced to high-value-added α-aryl-β-amino acids. The cross-coupling reaction of electron-deficient aryl bromides with a-cyanoacetates achieves the expected products with good yields and functional group compatibility under mild conditions. Excessive electron-richness in initial aryl bromides facilitates the self-coupling of desired products. DFT calculations confirm that the presence of electron-rich aryl substitutions decreases the reduction potentials of the product anions, making …

Comparison Of Ligands In Palladium-Catalyzed Electrochemical Allyl 4-Pyridinylation, Wei-Jie Ding, Chun-Hui Yang, Zhong-Tao Feng, Shi-Rong Lu, Xu Cheng

Journal of Electrochemistry

4-CN-pyridine is a widely applied 4-pyridinylation reagent for diverse transformations. Conventionally, the reaction proceeds via an open-shell radical cross-coupling pathway. Following our previous study, in this work, we report the Pd-catalyzed allyl 4-pyrinylation reaction under electrochemical conditions. The reaction proceeds via radical-polar crossover pathway in which the role of phosphine ligand in reactivity and selectivity was extensively investigated.

Recent Advance In Electrochemical Dehalogenative Deuteration, Peng-Fei Li, Guang-Sheng Kou, Li-Ping Qi, You-Ai Qiu

Journal of Electrochemistry

In recent years, the incorporation of deuterium atoms into organic compounds has emerged as a vital focus in the development of pharmaceutical molecules. This trend is driven by the increasing recognition of the significance of compounds containing deuterium atoms across various domains, including materials and biopharmaceuticals, where they have found widespread applications in mechanistic studies within the realms of chemistry and biology. Meanwhile, organic electrochemistry, as a relatively environmentally friendly catalytic mode with broad adaptability to redox reactions, has emerged as a crucial alternative to traditional halogen-deuterium exchange in the context of the reduction deuteration of halides. This approach circumvents …

Comparing Proliferation Rates And Collagen Production Of Cells Treated With Cuhars, Katie Elizabeth Mckenzie

Master's Theses

Cartilage is the padding in joints that protects the bones and aids in motion. Problems with the cartilage in the knee can be caused by mechanical damage or diseases like osteoarthritis. Chondrocytes make cartilage. The objective of this study is to determine the doubling time of chondrocytes per passage. I also want to determine the base amount of collagen-II created by chondrocytes as they age. I also want to determine how long it takes CuHARS to break down in different cell medias. Chondrocytes, human dermal fibroblasts, and CRL 2303 cells were grown and cultured for over a year. During that …

Pet And Polyolefin Plastics Supply Chains In Michigan: Present And Future Systems Analysis Of Environmental And Socio-Economic Impacts, Utkarsh S. Chaudhari, Kamand Sedaghatnia, Barbara K. Reck, Kate Maguire, Anne T. Johnson, David Watkins, Robert M. Handler, Tasmin Hossain, Damon S. Hartley, Vicki S. Thompson, Alejandra Peralta, Jenny L. Apriesnig, David Shonnard

Michigan Tech Publications

Many actions are underway at global, national, and local levels to increase plastics circularity. However, studies evaluating the environmental and socio-economic impacts of such a transition are lacking at regional levels in the United States. In this work, the existing polyethylene terephthalate and polyolefin plastics supply chains in Michigan were compared to a potential future (‘NextCycle’) scenario that looks at increasing Michigan’s overall recycling rate to 45%. Material flow analysis data was combined with environmental and socio-economic metrics to evaluate the sustainability of these supply chains for the modeled scenarios. Overall, the NextCycle scenario for these supply chains achieved a …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Development Of An Experimentally Validated Computational Fluid Dynamics Model For A Pbi Membrane-Based Anhydrous Hcl Electrolyzer, Kris Likit-Anurak, Hunter R. Teel, Ishwor Karki, Ben I. Howard, Brian C. Benicewicz, Sirivatch Shimpalee, Benjamin H. Meekins

Faculty Publications

We report the development of an experimentally-validated computational fluid dynamics (CFD) model for simulation of an anhydrous HCl electrolyzer. The experimental data from 3 membrane variants was used to provide kinetic and membrane parameters for the model. The model not only accurately simulates overall electrolyzer performance, but it also provides key insights into the transport phenomena within the electrolyzer. The model allows simulation of experimental parameters like high HCl flowrates and increased cell pressure that pose a high safety risk to researchers. The model shows hotspots in the temperature distribution that will need to be addressed by flow field modification …