Chemistry Commons^™

Cfd Analysis Of Hydrodynamic Cavitation Through An Orifice: Influence Of Different Inlet Pressures And Number Of Orifice Holes, Lemthong Chanphavong, Vongsavanh Chanthaboune, Keophousone Phonhalath

ASEAN Journal on Science and Technology for Development

Hydrodynamic cavitation (HC) is considered an energy-efficient process with high potential for utilization in many chemical processes. This study presents a computational fluid dynamics (CFD) analysis of cavitating flow through an orifice with a constant flow area. The Reynolds-Averaged Navier-Stokes (RANS) equations, coupled with turbulence and cavitation models, are employed to capture the complex flow behaviors. The effects of inlet pressures and number of orifice-holes on cavitation behavior are investigated. Result of the numerical simulation is validated with the existing experimental data from the literature. The CFD study revealed that cavitation initiates just behind the inlet edge of the orifice …

Effects Of Chain Length, Saturation, And Bases On Saponification, Sarah Fenik

Williams Honors College, Honors Research Projects

This project will analyze the effects of chain length and saturation of fatty acids on saponification processes, as well as the effects of the base used in the reaction. Stearic acid, lauric acid, and oleic acid will be used for the fatty acid comparisons, and sodium hydroxide and potassium hydroxide will be used for the base comparisons. Stearic acid is considered a long chain fatty acid, while lauric acid is considered a short chain fatty acid. Oleic acid is a monounsaturated fatty acid. Five soap products are be made: sodium stearate, sodium laurate, sodium oleate, potassium stearate, and potassium oleate. …

Beyond The Phonon Gas Model (Pgm): Unraveling The Unique Mechanistic Processes Dictating Thermal Transport In Highly Anharmonic And Disordered Materials, Sandip Thakur

Open Access Dissertations

Thermal transport in nonmetallic solids has traditionally been described by the phonon gas model (PGM), in which heat is carried by weakly interacting phonon quasiparticles in an ordered crystalline lattice. However, this model breaks down in materials characterized by strong anharmonicity, dynamic disorder, or structural complexity, features prevalent in many next-generation materials used in energy conversion, optoelectronics, and thermal management. This dissertation investigates thermal transport in such complex materials, including metal halide perovskites (MHPs), covalent organic frameworks (COFs), metal organic frameworks (MOFs), and 2D-3D heterostructures, through large-scale molecular dynamics (MD) simulations and frequency-resolved spectral analyses.

In MHPs, the work reveals …

Explorations Of Dna-Single-Walled Carbon Nanotube Interactions To Develop Multiplexed Molecularly Specific Biosensors For Inflammation, Amelia K. Ryan

Dissertations and Theses

Inflammatory cytokines such as interleukin-6 (IL-6) and interleukin-12 (IL-12) are central regulators of immune signaling and key biomarkers of disease, yet existing assays for their detection remain slow, invasive, and lack multiplexing ability. This dissertation advances the development of single-walled carbon nanotube (SWCNT) optical nanosensors capable of real-time, multiplexed, and molecularly specific cytokine detection through innovative use of single-stranded DNA (ssDNA) interfaces.

First, an IL-6-specific DNA aptamer was employed as both a dispersing agent and recognition probe for SWCNT fluorescence sensing. Sequence modifications, including anchor domains, truncations, and thermally induced refolding, were systematically tested to optimize sensitivity and selectivity. The …

Catalytic Deoxygenation Of Oleaginous Biomass To Renewable Diesel And Sustainable Aviation Fuel Via Decarboxylation/Decarbonylation, Chukwudalu Great Umenweke

Theses and Dissertations--Chemistry

Several technologies have been developed to produce hydrocarbon biofuels – renewable diesel (RD) and sustainable aviation fuel (SAF) – from fats, oils, and greases (FOG), with the hydroprocessing of esters and fatty acids (HEFA) representing one of the most mature pathways. In its current form, HEFA is mainly reliant on the hydrodeoxygenation (HDO) reaction, which has several drawbacks since HDO requires large amounts and pressures of hydrogen, feedstocks of high purity and cost, as well as problematic sulfided catalysts that risk contaminating the biofuel product with sulfur. A process based on decarboxylation/decarbonylation (deCO_x) offers an attractive alternative to …

Expanding The Vibrating Sharp-Edge Spray Ionization Toolkit For Oligonucleotide Characterization, Sultan Mahmud

Graduate Theses, Dissertations, and Problem Reports (ETD)

A gentle or soft Ionization process is a critical component in native mass spectrometry (MS) to lift the biomolecules from the bulk solution into the gas phase environment of the mass spectrometer preserving their shape, topology and non-covalent interactions. Electrospray ionization (ESI) facilitates structural preservation of proteins, nucleic acids and their complexes and as a result it has been extensively used in native MS. However, in negative ion mode, ESI is somewhat limited in sensitivity due to corona discharge effect resulting from the requirement of a high amount of voltage. This often disrupts the ESI process and may not preserve …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

A Potentially Fruitful Path Toward A Cleaner And Safer Environment: Mxenes Uses In Environmental Remediation, Ali Mohammad Amani, Milad Abbasi, Atena Najdian, Farzaneh Mohamadpour, Seyed Reza Kasaee, Hesam Kamyab, Shreeshivadasan Chelliapan, Hanieh Ardeshiri, Lobat Tayebi, Ehsan Vafa, Sarah Mosleh-Shirazi, Alireza Jahanbin, Saravanan Rajendran, Daniel Simancas-Racines

Electrical & Computer Engineering Faculty Publications

The rapid industrialization of the world has resulted in severe environmental pollution, necessitating the development of new materials such as pollution remediation. Two-dimensional (2D) MXenes have emerged as a promising family of materials due to their unique physicochemical properties, making them ideal for environmental remediation. The article sheds light on the new opportunities of MXenes in the removal of organic and inorganic contaminants, including organic dyes, pharmaceuticals, heavy metals, radionuclides, and gas pollutants. MXenes also show excellent performance in photocatalytic degradation, adsorption, and microbial inactivation with environmental safety. Moreover, their application in recovering valuable elements from waste streams is also …

Development, Synthesis And Characterization Of Advanced Low- Cobalt And High-Nickel Cathode Materials For Lithium-Ion Batteries, Arjun Patel

Theses and Dissertations

This dissertation focuses on the improvement of structural and electrochemical stability of active materials for lithium-ion batteries. It explores the modification strategies to mitigate the issues related to Ni-rich cathode materials, along with the continuous production of cathode precursors using a slug flow reactor to improve the quality of the product.

The First part of the dissertation examines the effect of substitution of cobalt with aluminum and iron on the electrochemical stability of Ni-rich lithium nickel cobalt manganese oxide (NCM) materials. This study investigates how Al and Fe doping work and how they impact the performance and stability of these …

First-Principles Study Of Ferroelectric Properties And Co2 Reduction Reaction Capabilities In Two-Dimensional Monolayers And Heterostructures, Mo Li

Dissertations

Two-dimensional (2D) materials hold significant potential for CO₂ reduction reactions (CO₂RR) due to their high surface-to-volume ratio. However, achieving high selectivity for desired products and overcoming limitations posed by scaling relationships remain challenging. Recent studies suggest that ferroelectric (FE) materials with switchable out-of-plane polarization (OOP) can effectively tune the adsorption behavior, thermodynamics, and kinetics of CO₂RR, offering promising solutions to these challenges. Using density functional theory (DFT) and the Berry phase approach, this work expands the family of 2D ferroelectrics by theoretically identifying Y₂CO₂, Y₂CS₂, and Sc …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Medium-Entropy Engineering Of Magnetism In Layered Antiferromagnet CuXNi2(1-X)CrXP2S6, Dinesh Upreti, Rabindra Basnet, M. M. Sharma, Santosh Karki Chhetri, Gokul Acharya, Md Rafique Un Nabi, Joshua Sakon, Mourad Benamara, Mansour Mortazavi, Jin Hu

Physics Faculty Publications and Presentations

Antiferromagnetic van der Waals-type M₂P₂X₆ compounds provide a versatile material platform for studying 2D magnetism and relevant phenomena. Establishing ferromagnetism in 2D materials is technologically valuable. Though magnetism is generally tunable via a chemical way, it is challenging to induce ferromagnetism with isovalent chalcogen and bimetallic substitutions in M₂P₂X₆. Here, we report co-substitution of Cu¹⁺ and Cr³⁺ for Ni²⁺ in Ni₂P₂S₆, creating Cu_xNi_2(1-x)Cr_xP₂S₆ medium-entropy alloys spanning a full substitution range ( …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-Based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO₂, MoS₂, and Al₂O₃) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment …

Co2 Capture Utilizing Novel Deep Eutectic Solvents: Modeling, Process Simulation, And Cost Analysis, Nazneen Aspi Kolah

Masters Theses

One of the most pressing global issues that humans face is climate change caused by anthropogenic greenhouse gas emissions, especially carbon dioxide (CO2). Conventional solvents utilized for CO₂ capture, such as amines, are widely used in industrial applications due to their high CO2 absorption capacity. However, deep eutectic solvents (DES) have attracted a lot of academic attention recently due to their biodegradability and low energy for regeneration.

This research serves as a foundational proof-of-concept for using DESs in industrial gas separation processes. Five DES are evaluated for CO2 removal from flue gases. Aspen Plus is utilized to simulate the performance …

Fitting Quality Of Nmr Relaxation Data To Differentiate Asphalt Binders, Rebecca M. Herndon, Kevin Lai, Magdy Abdelrahman, Klaus Woelk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt binder performance grades (PGs) are important metrics in designing pavements for effective transportation infrastructure. the PG system relies on the binder's stiffness and is determined through energy- and time-intensive physical testing. Physical properties, like stiffness, can also be determined by spin–lattice NMR relaxometry, a non-destructive chemical method. NMR relaxometry can quantify the molecular mobility of materials by determining relaxation times from exponential decays of excited nuclear magnetization. While relaxation times have been used to determine physical properties of materials, a quantitative relation to the PG grades of asphalt binder is yet to be established. in this study, T1 NMR …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO2, MoS2, and Al2O3) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment of 10 °C. Obtained results showed that thermal …

Experimental Evaluation Of A Recrosslinkable Co2-Resistant Micro-Sized Preformed Particle Gel For Co2 Sweep Efficiency Improvement In Reservoirs With Super-K Channels, Adel Alotibi, Tao Song, Ali Al Brahim, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A recross linkable CO₂-resistant branched preformed particle gel (CO₂-BRPPG) was developed for controlling CO₂ injection conformance, particularly in reservoirs with super-permeable channels. Previous work focused on a millimeter-sized CO₂-BRPPG in open fractures, but its performance in high-permeability channels with pore throat networks remained unexplored. This study used a sand pack model to evaluate a micro-sized CO₂-BRPPG under varying conditions of salinity, gel concentration, and pH. at ambient conditions, the equilibrium swelling ratio (ESR) of the gel reached 76 times its original size. This ratio decreased with increasing salinity but remained stable …

Influence Of Glycopolymer Structure On Amphiphilic, Hybrid, Linear Branched Block Copolymer Properties For Use In Biomedical Applications, Kevin Green

Dissertations

The focus of this dissertation is evaluating and adding fundamental knowledge regarding the structure-property relations of glycopolymers used in the design of hybrid block copolymers (HBC) that are cable of self-assembling into delivery vehicles for biomedical applications. A shift to the utilization of natural materials in the design and fabrication of drug-delivery vehicles has garnered significant attention. Understanding the effects of linear glycopolymers content and composition on the resulting HBCs properties can provide valuable insight into how these materials may be tailored for use in targeted biological applications.

The first chapter introduces current literature on the need for improvement in …

Understanding Defect Dynamics In Black Phosphorene Under Noble Gas Ion Irradiation., Saransh Gupta

Electronic Theses and Dissertations

Controlled introduction of defects in phosphorene using high-energy ion beams offers a promising route to design novel high-performance materials for energy technologies. However, this potential remains underexplored due to a lack of fundamental understanding of the atomic-scale mechanisms governing the production, accumulation, and temporal evolution of defects during ion irradiation. Here, we employ a combination of classical and ab initio molecular dynamics simulations to elucidate the effects of ion energy, angle of incidence, noble gas ion size/mass, and fluence on (a) defect generation (i.e., point defects, topological imperfections, voids), (b) atomic-scale mechanisms of defect formation and re-arrangement, and (c) defect …

Assessing Reproducibility Challenges In Clinical Metabolics, Darcy Lin Cochran

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Current metabolomics research is expanding to be multiplatform and interdisciplinary. Metabolomic analysis has the potential to provide detailed insight into any biological system of interest to analyze the underlying molecular mechanisms of variables like environment, disease, and genetics. Human clinical metabolomics is a major research area that is often focused on finding biomarkers or panels of biomarkers for different diseases. However, results are difficult to compare across different laboratories since the field of metabolomics has yet to widely adopt best practices for sample preparation, data acquisition and data processing, results are difficult to compare across different laboratories.

This thesis focuses …

Physicochemical Property Effects On Immune Modulating Polymeric Nanoparticles: Potential Applications In Spinal Cord Injury, Daniel J. Kolpek, Jaechang Kim, Hisham Mohammed, John C. Gensel, Jonghyuck Park

Markey Cancer Center Faculty Publications

Nanoparticles (NPs) offer promising potential as therapeutic agents for inflammation-related diseases, owing to their capabilities in drug delivery and immune modulation. In preclinical studies focusing on spinal cord injury (SCI), polymeric NPs have demonstrated the ability to reprogram innate immune cells. This reprogramming results in redirecting immune cells away from the injury site, downregulating pro-inflammatory signaling, and promoting a regenerative environment post-injury. However, to fully understand the mechanisms driving these effects and maximize therapeutic efficacy, it is crucial to assess NP interactions with innate immune cells. This review examines how the physicochemical properties of polymeric NPs influence their modulation of …

Nickel Electrocatalysts On Carbon Supports For The Hydrogen Evolution Reaction., Mohan Paudel

Electronic Theses and Dissertations

Hydrogen is an important energy storage alternative to fossil fuels due to its high energy density. Currently, most hydrogen is produced through petroleum feedstocks, which produce large amounts of carbon dioxide. However, a more eco-friendly method is the electrocatalytic splitting of water into hydrogen and oxygen. Efficient catalysts for the hydrogen evolution reaction (HER) are typically platinum group metals, which are rare and expensive. There is growing interest in developing HER electrocatalysts with earth-abundant metals for water electrolysis. Nickel, which lies in the same group in the periodic table as Pt and has similar chemical properties, is explored extensively for …

Development Of Uranium Fluoride Microstructures, Harry Jang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Uranium microstructured materials with controlled size and shape have found applications in several branches of the nuclear industry including as targets for medical isotopes production, fuels for nuclear reactors, standards for analytical measurements, and energy sources for space exploration. Morphological studies of actinide materials are also highly relevant to nuclear forensics-related work. Other potential applications include information storage, catalysis, sensors, and luminescent devices. Most studies on uranium microstructured materials have focused on binary oxides, nitrides, carbides, and fluorides, with the spherical shape being the dominant morphology. Prior to the work reported in this dissertation, aside from UF4 microspheres (ms) and …

Preface To Special Issue On Single-Entity Electroanalysis, Fei Li, Yi-Lun Ying, Yi-Ge Zhou

Journal of Electrochemistry

No abstract provided.

Author Spotlight, Li-Fang Yang, Joseph W. Sampson, Xiao-Hang Sun, Hai-Qiang Deng, He Zhang, Md Maksudur Rahman, Yang Tao, Hang Ren

Journal of Electrochemistry

No abstract provided.