Chemistry Commons^™

Effect Of Pre-Adsorbed Species On High-Pressure Adsorption Of Methane In Zeolite 5a Using Grand Canonical Monte Carlo (Gcmc) Simulations, Kanhamardi Lao, Brooks D. Rabideau

Shelby Hall Graduate Research Forum Posters

Natural gas upgrading, which removes impurities from methane (CH4), is essential for industrial applications, including liquefied natural gas (LNG) production and power generation, as well as for residential use. Removing non-hydrocarbon impurities such as carbon dioxide (CO2), nitrogen (N2), and water vapor (H2O), among others, along with separating heavier hydrocarbon gases from raw natural gas, is required to achieve high- purity methane and prevent pipeline corrosion. Zeolite 5A is a microporous aluminosilicate material with a pore size of approximately 5 Å, containing sodium and calcium cations that balance the framework’s negative charge. Its structure offers high thermal stability and a …

Enhancing Cycle Life Of Graphite ‖ Lifepo4 Batteries Via Copper Substituted Li2Ni1-XCuXO2 Cathode Prelithiation Additive, Jian-Ming Zheng, Jing-Wen Zhang, Tian-Peng Jiao

Journal of Electrochemistry

Lithium nickel oxide (Li₂NiO₂), as a sacrificial cathode prelithiation additive, has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries (LIBs). However, high-cost Li₂NiO₂ suffers from inferior delithiation kinetics during the first cycle. Herein, we investigate the effects of the cost-effective Cu substitution of Li₂Ni_1-xCu_xO₂ (x = 0, 0.2, 0.3, 0.5, 0.7) synthesized by high-temperature solid-phase method on the structure, morphology, electrochemical performance of graphite‖LiFePO₄ battery. The X-ray Diffraction (XRD) refinement result demonstrates that Cu substitution strategy is favorable …

Metal Nitrides As Cathode Hosts For Lithium-Sulfur Batteries, Hai-Ji Xiong, Cheng-Wei Zhu, Ding-Rong Deng, Qi-Hui Wu

Journal of Electrochemistry

Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density (2600 Wh·kg^–1) and specific capacity (1675 mAh·g^–1). Currently, various strategies have been proposed to overcome the technical barriers, e.g., “shuttle effect”, capacity decay and volumetric change, which impede the successful commercialization of lithium-sulfur batteries. This paper reviews the applications of metal nitrides as the cathode hosts for high-performance lithium-sulfur batteries, summarizes the design strategies of different host materials, and discusses the relationship between the properties of metal nitrides and their …

Sno2 Particles Embedded Into Carbon Coated Mesoporous SioX Rod As High Volumetric Capacity Anode For Lithium-Ion Batteries, Jia-Lin Guo, Ni-Ni Li, Peng Zheng

Journal of Electrochemistry

Due to the high capacity and moderate volume expansion of silicon protoxide SiO_x (160%) compared with that of Si (300%), reducing silicon dioxide SiO₂ into SiO_x while maintaining its special nano-morphology makes it attractive as an anode of Li-ion batteries. Herein, through a one-pot facile high-temperature annealing route, using SBA15 as the silicon source, and embedding tin dioxide SnO₂ particles into carbon coated SiO_x, the mesoporous SiO_x-SnO₂@C rod composite was prepared and tested as the anode material. The results revealed that the SnO₂ particles were distributed uniformly in the …

Biobased Acrylate Composites With Enhanced Strength For Additive Manufacturing, Nicole Wagner, Joseph Mcwherter

Engineering Faculty Articles and Research

With the expanding use of polymers in additive manufacturing, sustainable resins for use in vat photopolymerization are required to reduce their environmental impact. One promising approach to achieve this is to incorporate biobased fillers that replace the acrylates in photopolymer resins as ‘green’ alternatives. In this study, photopolymer composites consisting of a methacrylate resin with varying calcium carbonate powder content between 0 and 50 wt.% were investigated. A digital light processing technique was used to fabricate tensile test specimens for mechanical testing. Good printability, dimensional accuracy, and good interlayer adhesion were observed for composite resin formulations that incorporated calcium carbonate …

In Memoriam - Nora Sabelli: Master Orchestrator Of Grant Programs And Mentor For Advancing The Interdisciplinary Learning Sciences Field, Eric Hamilton, Jeremy Roschelle, Roy Pea, Barbara Means, Louis Gomez, Kim Gomez, Nancy Butler Songer

Education Division Scholarship

On Friday, September 6, 2024, the learning sciences field lost a giant in Dr. Nora Sabelli, 87 years old, a personal mentor to many researchers and an inspiration to so many learning scientists and STEM leaders. Nora’s first professional career was as a computational chemist, and later she became a passionate leader in research for improving STEM education. Nora’s time as a senior program officer at the National Science Foundation’s (NSF) Education and Human Resources (EHR) directorate was legendary; she was a force of nature who reshaped funding priorities for stronger science and a stronger connection of science to education …

New Insights Into Controlling The Functional Properties Of Tin Oxide-Based Materials, Alexandra Kuriganova, Nina Smirnova

Journal of Electrochemistry

Development of methodologies for fabrications of nanostructured materials that provide control over their microstructural features and compositions represents a fundamental step in the advancement of technologies for productions of materials with well-defined functional properties. Pulse electrolysis, a top-down electrochemical approach, has been demonstrated to be a viable method for producing nanostructured materials with a particular efficacy in the synthesis of tin oxides. This method allows for significant control over the composition and shape of the resulting tin oxides particles by modifying the anionic composition of the aqueous electrolyte, obviating the need for additional capping agents in the synthesis process and …

Nanostructured Graphitic Carbon Nitride For Photocatalytic And Electrochemical Applications, Muhammad Abdul Qadeer, Iqra Fareed, Asif Hussaine, Muhammad Asim Farid, Sadia Nazir, Faheem K. Butt, Ji-Jun Zou, Muhammad Tahir, Shang-Feng Du

Journal of Electrochemistry

Graphitic carbon nitride (g-C₃N₄) exhibits great mechanical as well as thermal characteristics, making it a valuable material for use in photoelectric conversion devices, an accelerator for synthesis of organic compounds, an electrolyte for fuel cell applications or power sources, and a hydrogen storage substance and a fluorescence detector. It is fabricated using different methods, and there is a variety of morphologies and nanostructures such as zero to three dimensions that have been designed for different purposes. There are many reports about g-C₃N₄ in recent years, but a comprehensive review which covers nanostructure dimensions …

A Cnt Intercalated Co Porphyrin-Based Metal Organic Framework Catalyst For Oxygen Reduction Reaction, Pei-Pei He, Jin-Hua Shi, Xiao-Yu Li, Ming-Jie Liu, Zhou Fang, Jing He, Zhong-Jian Li, Xin-Sheng Peng, Qing-Gang He

Journal of Electrochemistry

The poor electronic conductivity of metal-organic framework (MOF) materials hinders their direct application in the field of electrocatalysis in fuel cells. Herein, we proposed a strategy of embedding carbon nanotubes (CNTs) during the growth process of MOF crystals, synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure. Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin. Simultaneously, the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency. X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT …

Associations Between Social Determinants Of Health And Mental Health Disorders Among U.S. Population: A Cross-Sectional Study, S. Tanarsuwongkul

Faculty Publications

Aims

The impact of social determinants of health (SDOH) on mental health is increasingly realized. A comprehensive study examining the associations of SDOH with mental health disorders has yet to be accomplished. This study evaluated the associations between five domains of SDOH and the SDOH summary score and mental health disorders in the United States.

Methods

We analyzed data from a diverse group of participants enrolled in the All of Us research programme, a research programme to gather data from one million people living in the United States, in a cross-sectional design. The primary exposure was SDOH based on Healthy …

Cold Atmospheric Plasma Induced Degradation Of Organophosphate Pesticides On Kevlar Swatches, Ta Chun Lin, Victor Somtochukwu Mbanugo, Boluwatife Stephen Ojo, Yue-Wern Huang, Marek Locmelis, Frank Daoru Han

Biological Sciences Faculty Research & Creative Works

Cold atmospheric plasma (CAP) was evaluated for degrading organophosphate pesticide (OP) residues (acephate, malathion, and dimethoate) from Kevlar fabrics. Fourier transform-Infrared (FTIR) spectroscopy, scanning electron microscope (SEM) imaging and tensile strength testing confirmed that CAP treatment preserved Kevlar's structural integrity and mechanical properties. Results show degradation efficiency increased with higher power, shorter discharge gaps, and longer exposure duration. Hyperspectral imaging supported the detection of plasma-induced spectral changes, reinforcing the presence of reactive species. The strong oxidative potential of CAP facilitated the rapid breakdown of OPs into nontoxic byproducts. These findings demonstrate the potential of CAP as a portable, energy-efficient solution …

Reducing Friction In Machine Oil Via Cesium-Hybridized Graphene Oxide Quantum Dot Additives, Islam Gomaa, Sherief Elsoudy, Maryam Galal, Ahmed Azim

Nanotechnology Research Centre

Friction and wear are among the most common causes of energy loss and component failure in mechanical systems, accounting for around 20–30% of total global energy consumption. Conventional lubricants fail to provide consistent performance in harsh conditions due to inadequate additive dispersion, agglomeration, and restricted surface reactivity. Recent advances in nanomaterial-based lubricants have shown promise, but it remains difficult to achieve significant friction and wear reduction at low additive concentrations while preserving stability. In this study, we synthesized and tested cesium-hybridized graphene oxide quantum dots (Cs-GOQDs) as novel lubricant additives. When incorporated into machine oil at 0.1 wt%, Cs-GOQDs reduced …

Characterization And Leaching Feasibility Studies Of Copper Flue Dust For The Recovery Of Main And Trace Metals, Fardis Nakhaei, Marek Locmelis, Lana Alagha, Michael S. Moats, Carlos Eyzaguirre, Cory Smith

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Although copper smelter dust (CSD) is classified as hazardous waste, it also serves as a valuable secondary resource, offering potential for the recovery of critical elements. In this study, CSD samples were collected from the waste heat boiler (WHB) and electrostatic precipitator (ESP) units connected to the flash smelting furnace at a copper smelter. The representative samples were extensively characterized by particle size, and chemical and mineralogical analyses. Following sample characterization, leaching experiments were performed to evaluate the potential extraction of Cu, Fe, As, Zn, Pb, In, Ga, and Ge from the flue dusts. Distilled water, H2SO4, and HCl were …

Pla-Based Bone Tissue Engineering Scaffolds Incorporating Hydroxyapatite And Bioactive Glass Using Digital Light Processing, Engin Gepek, Fateme Fayyazbakhsh, Lev Suliandziga, Vadym Mochalin, Osman Iyibilgin, Yue-Wern Huang, Ming C. Leu

Chemistry Faculty Research & Creative Works

Bone tissue engineering (BTE) aims to repair bone defects using biocompatible materials with tailored geometries and pore structures, providing appropriate mechanical support and control over biodegradation kinetics to promote bone growth. In this study, we utilized digital light processing (DLP) 3D printing to fabricate scaffolds with varying pore sizes using polymer–ceramic slurries composed of polylactic acid (PLA) as the main polymer matrix, incorporated with hydroxyapatite (HA) and bioactive borate glass (BBG) at various ratios. We studied the effect of composition on rheological behavior, printability, mechanical properties, bioactivity, degradation rate, and biocompatibility. While HA increased viscosity and reduced printing accuracy, it …

Mechanical And Thermal Characterization Of Additively Manufactured Carbon/Nylon 12 And Carbon/Peek Composites, Matik Heskin, Bradley Deuser, Thomas P. Schuman, K. Chandrashekhara, John Bayldon, Jeff Degrange, Steven Patterson, Neiko Levenhagen

Chemistry Faculty Research & Creative Works

This study explores additive manufacturing of carbon fiber-reinforced thermoplastic composites using the Composite-Based Additive Manufacturing (CBAM) process. Carbon/Nylon 12 and Carbon/PEEK composites were fabricated and evaluated through mechanical (compression, tensile, flexural, and impact) and thermal (DSC and TGA) tests. Carbon/PEEK exhibited superior mechanical performance, with 97.5% higher tensile strength, 79.8% higher elastic modulus, and 59.6% higher flexural strength compared to Carbon/Nylon 12. Thermal testing showed that Carbon/PEEK had higher thermal stability, beginning degradation at 350 °C versus 298 °C for Carbon/Nylon. These results indicate that CBAM-fabricated Carbon/PEEK composites are suitable for applications requiring high strength and temperature resistance.

Quantifying Inositol Phosphate Dephosphorylation To Understand The Role Of Recalcitrant Organic Phosphorus Forms On Harmful Algal Blooms In Freshwater Systems, Iffat Tasnim

College of Graduate Studies: Theses & Dissertations

Organophosphorus such as phytic acid, a surrogate species of inositol phosphate (IP), may serve as a source for orthophosphate (OP) in freshwater. In absence of OP, competent aquatic microorganisms upregulate the production of specialized enzymes to obtain growth-sustaining OP from organic phosphorus (org-P) forms. The contribution of recalcitrant org-P to the OP pool has been overlooked due to the lack of capable tools to measure OP production from org-P accurately. The objective of this study was to quantify OP production from phytic acid (a surrogate form of recalcitrant org-P) to assess the contribution of recalcitrant org-P forms to the total …

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Synthesis Of Bio-Orthogonal Hydrogels For 3d Cell Culture Via Penicillamine Β-Thiolactone-Mediated Native Chemical Ligation, Kaelin E. Marshall, Matthew E. Currier, Nathan J. Oldenhuis

Honors Theses and Capstones

Many hydrogel systems designed to mimic the extracellular matrix (ECM) employ thiol-based chemistries with undesirable functional groups, including vinyl sulfones and methacrylates. In downstream applications, any unreacted functional groups are problematic and render hydrogels non-viable for human use. Here, we introduce modifications to the Native Chemical Ligation (NCL) mechanism, exploring the elimination of cytotoxic byproducts and increased reaction rate by using a β-thiolactone. The inclusion of the β-thiolactone results in retention of the thiol within the gel, as well as enhanced kinetics due to the thermodynamic favorability of the ring opening and amide formation. We achieved this by functionalizing 4-arm …

Synthesis And Characterization Of Free Radical Scavenging Dendrimer Nanogels Via Cross-Linking Reaction-Enabled Flash Nanoprecipitation, Lin Qi, Da Huang, Huari Kou, Anna Chernatynskaya, Nuran Ercal, Hu Yang

Chemistry Faculty Research & Creative Works

This work reports the development and evaluation of dendrimer-based nanogels based on Poly amidoamine (PAMAM) dendrimer generation 5, engineered to act as a carrier with reactive oxygen species (ROS)-scavenging capabilities. We developed a cross-linking reaction-enabled flash nanoprecipitation method in which the cross-linking reaction occurs during the flash nanoprecipitation process to form a cross-linked nanostructure. Using this approach, an N-hydroxy succinimide (NHS)-functionalized ROS-responsive thioketal cross-linker (TK-NHS) was synthesized and utilized to cross-link DAB-core PAMAM dendrimer G5, resulting in the formation of G5-TK nanogels. The resulting nanogels were characterized using dynamic light scattering and transmission electron microscopy, and their cytocompatibility, irritancy, cellular …

Scalable Fabrication Of High-Payload Dendrimer-Based Nanoparticles For Targeted Atherosclerosis Therapy, Huari Kou, Lin Qi, Da Huang, Jiandong Wu, Honglan Shi, Hu Yang

Chemistry Faculty Research & Creative Works

Nanoparticle-based therapeutics hold promise for the treatment of atherosclerosis, but challenges such as low drug-loading capacity and a lack of scalable, controllable production hinder their clinical translation. Flash nanoprecipitation, a continuous synthesis method, offers a potential solution for scalable and reproducible nanoparticle production. In this study, we employed a custom-designed multi-inlet vortex mixer to perform cross-linking reaction-enabled flash nanoprecipitation, facilitating controlled and scalable synthesis of cross-linked Poly amidoamine (PAMAM) dendrimer nanoparticles. Notably, this approach allows simultaneous nanoparticle cross-linking and drug loading in a single step. The mannose moiety enabled specific targeting of macrophages via mannose receptors, enhancing the localization of …

Development And Characterization Of Polysaccharide-Based Controlled Drug Delivery Platforms, Amanda Pepler

Open Access Dissertations

Drug delivery research focuses on overcoming challenges in patient treatment. Most therapeutics are delivered systemically through oral or intravenous routes. However, these administration methods are often inefficient due to therapeutic hydrophobicity, poor bioavailability, and liver metabolic clearance, necessitating frequent dosing. When treatment plans require frequent dosing, patients experience significant fluctuations in therapeutic concentration in the bloodstream, which can increase adverse side effects. These factors contribute to low patient compliance. Therefore, the core focus of drug delivery research is to develop new administration routes for therapeutics. Drug delivery systems (DDS) that can target therapeutics to a localized region offer advantages over …

Valorizing Municipal Solid Waste For Sustainable Aviation Fuel And Polyhydroxyalkanoate Bioplastics: Pyrolysis And Microbial Pathways, Emon Das

Theses and Dissertations--Biosystems and Agricultural Engineering

The escalating global burden of municipal solid waste (MSW), projected to reach 3.88 billion tons annually by 2050, calls for innovative valorization strategies to mitigate environmental impacts and promote a circular bioeconomy. This thesis investigates the conversion of MSW into two high-value products: sustainable aviation fuel (SAF) and polyhydroxyalkanoate (PHA) bioplastics. Chapter one presents comprehensive physicochemical characterization and pyrolysis-GC/MS analysis of MSW feedstocks. The physicochemical results reveal that densification enhances handling and storage properties, while pyrolysis-GC/MS analysis indicates that plastic-rich MSW streams produce bio-oils with favorable hydrocarbon profiles suitable for SAF production, potentially contributing to decarbonization efforts in the aviation …

Evaluation Of Practical Methods To Determine If A Karst Creek Is Gaining Or Losing: Case Study Of Leith Creek, Elizabeth Jones

Graduate Theses/Dissertations

Karst landscapes are abundant in Missouri, with features such as caves, springs, and sinkholes that form through the dissolution of limestone. Leith Creek is a small stream in Polk County, Missouri fed by two springs and the shallow unconfined Springfield Plateau aquifer, a highly karstified aquifer which is made up of limestone and minor interbedded shale-mudstone units. To determine if Leith Creek is gaining or losing, stream flow, water chemistry and temperature sensors were monitored. Stream flow results required multiple visits to take measurements while temperature sensors required two visits, one to install the dataloggers and another to remove the …

Advances In Bacterial Cellulose-Based Scaffolds For Tissue Engineering: Review, Rewati Raman Ujjwal, Gymama Slaughter

Center for Bioelectronics Publications

Bacterial cellulose (BC) has emerged as a highly versatile and promising biomaterial in tissue engineering, with potential applications across skin, bone, cartilage, and vascular regeneration. Its exceptional properties like high mechanical strength, superior biocompatibility, excellent moisture retention, and inherent ability to support cell adhesion and proliferation, make BC particularly effective for wound healing and skin regeneration. These attributes accelerate tissue repair and foster new tissue formation, highlighting its value in skin-related applications. Additionally, BC's capacity to support osteogenic differentiation, combined with its mechanical robustness, positions it as a strong candidate for bone tissue engineering, facilitating regeneration and repair. Recent advancements …

A Comparison Of Microcrystal Electron Diffraction And X-Ray Powder Diffraction For The Structural Analysis Of Metal-Organic Frameworks, Erik Biehler, Silvana Pagola, Daniel Stam, Johannes Merkelbach, Christian Jandl, Tarek M. Abdel-Fattah

Chemistry & Biochemistry Faculty Publications

This study successfully implemented microcrystal electron diffraction (microED) and X-ray powder diffraction (XRPD) for the crystal structure determination of a new phase, TAF-CNU-1, Ni(C₈H₄O₄)·3H₂O, solved by microED from single microcrystals in the powder and refined at the kinematic and dynamic electron diffraction theory levels. This nickel metal–organic framework (MOF), together with its cobalt and manganese analogues with formula M (C₈H₄O₄)·2H₂O with M = Mn ^II or Co^II, were synthesized in aqueous media as one-pot preparations from the corresponding hydrated metal chlorides and sodium terephthalate, as a promising `green' synthetic route to moisture-stable MOFs. The crystal structures of the …

Metathesis Or Isomerization: Counteranion Directed Reactivity Of Grubbs I, Paul D. Miller, Joe B. Calkins, Craig A. Bayse, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Catalytic isomerization of alkenes has garnered interest for many years, but there are remaining challenges when it comes to thermodynamic selectivity and uncontrolled isomerization. Nonbiased substrates, be it sterically or thermodynamically, remain challenging for many catalysts, with a few examples available in the more modern literature. Herein, we present the controlled isomerization of linear alkenes with a cocatalytic mixture of commercially available catalyst and reagents: Grubbs I, tris(pentafluorophenyl)borane, and triethylsilane. DFT calculations indicate that an observed alkylidyne hydride intermediate is in rapid equilibrium with an alkylidene that binds the alkene substrate. This combination results in a pi-acidic metal and a …

Stack Bonding In Pentacene And Its Derivatives, Craig A. Bayse

Chemistry & Biochemistry Faculty Publications

Understanding the nature of π-stacking interactions is important to molecular recognition, self-assembly, and organic semiconductors. The stack bonding order (SBO) model of π-stacking has shown that the conformations of dimers occur when the combinations of monomer MOs are overall stack bonding in character. DFT calculations show that minima found on the potential energy surface for the π-stacked dimers of pentacene and perfluoropentacene occur when the dimer MOs are constructed from combinations of monomer MOs with an allowed SBO. An ex-amination of the MOs of π-stacked dimers extracted from X-ray structures of alkynyl derivatives like TIPS-pentacene pack at one or more …

Application Of Telc Model To Better Elucidate Neural Stimulation By Touch, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

Aim: This study is to better understand how the transient ion transport activity of touch receptors could change the graded potential to stimulate an action potential firing.

Methods: The latest transmembrane-electrostatically localized protons/cations charges (TELC) theory is employed for numerical analysis to calculate the neural touch signal transduction responding time required to fire an action potential spike.

Results: A neural action potential spike was constructed successfully using newly developed time-dependent TELC-based neural transmembrane potential integral equations (Equations 5, 6, and 7). The results explicated that the TELC curve has an inverse relationship with neural transmembrane potential since its curve appears …

Identification Of Π-Stacking Motifs In Naphthalene Diimides Via Solid-State Nmr, Jennifer E. Mejia, Hannah E. Butler-Au, Nalaya E. Thompson, Karcher D. Goodman, Elizabeth R. Zengel, Robert D. Pike, Jingdong Mao, Craig A. Bayse

Chemistry & Biochemistry Faculty Publications

Organic electronics, featuring π-conjugated small molecules and polymers, have gained significant attention for their potential in flexible, lightweight devices. However, characterization of the ordered, π-stacking domains within these materials using microscopy or X-ray diffraction (XRD) is challenging with complex systems or when crystallography is impractical. This study applied 1D ¹³C multiple cross-polarization magic angle spinning (multiCP/MAS) and 2D ¹H-¹³C heteronuclear correlation (HetCor) solid-state nuclear magnetic resonance (ssNMR) to systematically characterize π-stacking motifs in a series of N,N'-dialkyl naphthalene diimides (NDIs). These techniques were shown to distinguish between the electronic environments attributed to different π-stacking motifs adopted in these NDIs, such …

Amphiphilic Tripodal Metalloligands: Synthesis, Coordination Chemistry And Preliminary Catalysis, Austin W. Medley, Paul D. Miller, Craig A. Bayse, Robert D. Pike, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Triscatecholate binding has been widely studied in the context of biological systems, supramolecular chemistry, and weak aggregate interactions. However, the utilization of the triscatecholate binding motif for the preparation of metalloligands remains unexplored. Herein, we report the synthesis, structural characterization, and functional studies of a triscatecholate ligand with an appended pyridyl residue as a candidate for such applications. Our findings reveal that the selective formation of cis-triscatecholate-based metalloligands is influenced by electronic effects on the catecholate anions, enabling the targeted synthesis of Al(III), Ga(III), and In(III) triscatecholate metalloligands capable of binding Zn(II) and Ru(II) at the appended pyridyl moiety for …