Chemistry Commons^™

Advanced Analytical Biosensing For Cancer Detection And Neural Diagnostics Using Tapered Optical Fiber (Tof), Protonic, And High Throughput Microplate –Based Technologie, Bayan Hassan Alharbi

Chemistry & Biochemistry Theses & Dissertations

This dissertation investigates the development and application of advanced biosensing technologies to enhance early disease detection, neurological diagnostics, and bioactive compound evaluation. The research spans four key areas. First, it introduces tapered optical fiber (TOF)-based plasmonic biosensors for the non-invasive detection of prostate cancer, demonstrating high sensitivity and specificity compared to conventional diagnostic methods.

Second, it explores the use of fluorescent biosensors to test the Transmembrane Electrostatically Localized Proton (TELP) theory, shedding light on the role of localized protons in neuronal signaling and energy transfer. Third, the work presents a high-throughput, microplate-based biosensing platform for analyzing mitochondrial function under nanosecond …

Numerical Simulation Of The Pitting Corrosion Behavior Of Stainless Steel Bellows Influenced By Varying Liquid Film Thicknesses, Lu-Jun Ren, Guo-Min Li, Zhen-Xiao Zhu, Hai-Yan Xiong, Bing Li

Journal of Electrochemistry

To advance the understanding of the corrosion behavior of stainless steel bellows in marine atmospheric environments and enhance the precision of service life predictions, this study employs finite element simulations to investigate the pitting corrosion rates and pit morphologies of bellows peaks and troughs under varying electrolyte film thicknesses. The model incorporates localized electrochemical reactions, oxygen concentration, and homogeneous solution reactions. For improved computational accuracy, the fitted polarization curve data were directly applied as nonlinear boundary conditions on the electrode surface via interpolation functions. Simulation results reveal that the peak regions exhibit faster corrosion rates than the trough regions. With …

Research Progress On Thermal Management Of Lithium-Ion Batteries, Hong-Da Li, Qiu-Wan Shen, Zhao-Yang Zhang, Xin-Yue Zhao, Yuan Wei, Shi-An Li

Journal of Electrochemistry

Nowadays, new energy technologies are developing rapidly, energy storage systems are widely used, and lithium-ion batteries occupy a dominant position among them. Therefore, it is also very important to ensure their performance, safety and service life through thermal management technology. In this paper, the causes of thermal runaway of lithium batteries are reviewed firstly, and three commonly used thermal management technologies, namely, air cooling, liquid cooling and phase change material cooling, are compared according to relevant literature in recent years. Air cooling technology has been widely studied because of its simple structure and low cost, but its temperature control effect …

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Ionic Liquid Enhanced Proton Transfer For Neutral Oxygen Evolution Reaction, Ming-Xing Chen, Nian Liu, Zi-He Dua, Jing Qi, Rui Cao

Journal of Electrochemistry

The development of highly active catalyst in pH-neutral media for oxygen evolution reaction (OER) is critical in the field of renewable energy storage and conversion. Nevertheless, the slow kinetics of proton-coupled electron transfer (PCET) hinders the overall OER efficiency. Herein, we report an ionic liquid (IL) modified CoSn(OH)₆ nanocubes (denoted as CoSn(OH)₆-IL), which could be prepared through a facile strategy. The modified IL would not change the structural characteristics of CoSn(OH)₆, but could effectively regulate the local proton activity near the active sites. The CoSn(OH)₆-IL exhibited higher intrinsic OER performances than the pristine …

Investigating The Thixotropy Of Fresh Struvite Cement-Based Composite: Insights On Mechanisms Of The Pastes’ Thixotropic Behavior, Ugochukwu Ewuzie, Abdulkareem O. Yusuf, Damilola Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite (ST) recovered during wastewater treatment has been sparsely applied in cement-based composites. This study systematically evaluated the thixotropic behavior of cement-struvite (CST) pastes, a mix of 5–20 % ST by mass of cement, and proposed the interaction mechanisms leading to the pastes' thixotropy. The hysteresis loop area was used to establish the pastes' thixotropy and investigate its relationship with increased ST content, temperature, and yield stress. In the thixotropic behavior model used, the equilibrium shear stress was employed to examine the CST pastes' irreversible change; the characteristic time of deflocculation was used to study the flocs destruction process; and …

Vacuum Consistent Electrochemistry In Ionic Liquid Combined With Oxide Epitaxy, Yuji Matsumoto

Journal of Electrochemistry

We introduce our state-of-the art of “vacuum consistent electrochemistry” to an investigation of the interfaces between oxides and ionic liquid (IL). Pulsed laser deposition (PLD) has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films. On the other hand, electrochemistry is a simple, very sensitive, and non-destructive analysis technique for solid-liquid interfaces. To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films, as well as bulk oxide single-crystals, with IL, we employ a home-built PLD-electrochemical (EC) system with IL as an electrolyte. The system allows one to …

Pm Irras Studies Of Organized Molecular Films At A Gold Electrode Surface, Zhang-Fei Su, Ai-Cheng Chen, Jacek Lipkowski

Journal of Electrochemistry

This feature article illustrates the potential of polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) to provide molecular-level information about the structure, orientation and conformation of constituents of thin films at electrode surfaces. PM IRRAS relies on the surface selection rules stating that the p-polarized IR beam is enhanced, while the s-polarized beam is attenuated at the metal surface. The difference between p- and s-polarized beams eliminates the background of the solvent and provides IR spectra at a single electrode potential. In contrast, two other popular in situ IR spectroscopic techniques, namely, subtractively normalized interfacial Fourier transform infrared spectroscopy (SNIFTIRS) …

Redox-Active Monolayers On Ito Prepared By Post-Amidation And Direct Esterification And Their Spectroelectrochemical Characterization, Takamasa Sagara, Sae Nakai, Ryusuke Yofu, Shota Kojin

Journal of Electrochemistry

A redox-active monolayer on an optically transparent electrode constitutes a typical platform for spectroelectrochemical sensing. The necessity for its sophistication arises from the availability of multi-dimensional sensing signals. Simultaneous monitoring of the redox current and color change synchronized with the oxidation state change significantly enhances sensitivity and selectivity. This study aimed to elucidate the modification of an indium tin oxide (ITO) electrode with a viologen monolayer with an ordered orientation. Novel methods were developed to immobilize a viologen molecule bearing a carboxyl group to form assembled monolayers through a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide with N-hydroxy-succinimide (EDC/NHS). In the two methods …

Ambient Co2 Capture And Valorization Enabled By Tandem Electrolysis Using Solid-State Electrolyte Reactor, Yan-Bo Hua, Bao-Xin Ni, Kun Jiang

Journal of Electrochemistry

Electrocatalytic carbon dioxide reduction is a promising technology for addressing global energy and environmental crises. However, its practical application faces two critical challenges: the complex and energy-intensive process of separating mixed reduction products and the economic viability of the carbon sources (reactants) used. To tackle these challenges simultaneously, solid-state electrolyte (SSE) reactors are emerging as a promising solution. In this review, we focus on the feasibility of applying SSE for tandem electrochemical CO₂ capture and conversion. The configurations and fundamental principles of SSE reactors are first discussed, followed by an introduction to its applications in these two specific areas, …

Poly(Pyridinium Salt)S Containing 9,9-Bis(4- Aminophenyl)Fluorene Moieties With Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline And Light-Emitting Properties, Pradip K. Bhowmik, David King, Haesook Han, Andras F. Wacha, Matti Knaapila

Chemistry and Biochemistry Faculty Research

Main-chain conjugated and non-conjugated polyelectrolytes are an important class of materials that have many technological applications ranging from fire-retardant materials to carbon-nanotube composites, nonlinear optical materials, electrochromic materials for smart windows, and optical sensors for biomolecules. Here, we describe a series of poly(pyridinium salt)s-fluorene containing 9,9-bis(4-aminophenyl)fluorene moieties with various organic counterions that were synthesized using ring-transmutation polymerization and metathesis reactions, which are non-conjugated polyelectrolytes. Their chemical structures were characterized by Fourier transform infrared (FTIR), proton (1H) and fluorine 19 (19F) nuclear magnetic resonance (NMR) spectrometers, and elemental analysis. They exhibited polyelectrolytic behavior in dimethyl sulfoxide. Their lyotropic liquid-crystalline phases were …

Colloidal Hot-Injection Synthesis Of Cubse2 Nanocrystals: Tetragonal Chalcogenide Templates For Superionic Lithiation Pathways, Yunhao Xu, Niket Powar, Kelly Zervos, Isabella Campbell, Simran Choudhary, Layan Al-Khaled, Progna Banerjee

Chemistry: Faculty Publications and Other Works

Copper boron selenides represent a previously unexplored class of materials with tetragonal structural symmetries and bonding chemistries potentially relevant to lithium-ion conduction. In this work, the first colloidal synthesis of nanocrystalline copper boron selenides is reported, enabling access to nanocrystals with reaction times shown as the synthetic knob to control composition and morphology. Copper boron selenide nanocrystals are synthetically designed as precursors for lithiation reactions aimed at probing structural evolution and ionic mobility pathways toward superionic conductors applicable as solid electrolytes in lithium-ion batteries. Postsynthetic lithiation studies under ambient conditions reveal a series of phase transformations and morphological changes, which …

Technical Communication Instruction Partnership With Engineering Faculty, Ashley S. Mcguire, Michael M. Lipscomb

Libraries Professional Work

Graduate students in STEM fields are often expected to communicate – both in writing and orally – at a professional level by the time they submit their theses and dissertations. Unfortunately, many graduate students lack opportunities to learn how to do that in a STEM setting. An informal review of US programs revealed that many offer writing courses modeled on traditional composition courses, which are not necessarily directed to the needs of STEM students. Further, many of these courses provide a series of isolated learning modules with little continuity or encouragement to revise and in which technological writing assistance is …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Human Gut Commensal Alistipes Timonensis Modulates The Host Lipidome And Delivers Anti-Inflammatory Outer Membrane Vesicles To Suppress Colitis In An Il10-Deficient Mouse Model, Ethan Older, Mary K. Mitchell, Andrew Campbell, Xiaoying Lian, Michael Madden, Yuzhen Wang, Lauren E. Van De Wal, Thelma Zaw, Brandon N. Vanderveen, Rodney Tatum, E. Angela Murphy, Yan-Hua Chen, Daping Fang, Melissa Ellermann, Jie Li

Faculty Publications

Correlative studies have linked human gut microbes to specific health conditions. Alistipes is one such microbial genus negatively linked to inflammatory bowel disease (IBD). However, the protective role of Alistipes in IBD is understudied, and the underlying molecular mechanisms remain unknown. In this study, colonization of Il10-deficient mice with Alistipes timonensis DSM 27924 delays colitis development. Colonization does not significantly alter the gut microbiome composition, but instead shifts the host plasma lipidome, increasing phosphatidic acids while decreasing triglycerides. Outer membrane vesicles (OMVs) derived from Alistipes are detected in the plasma of colonized mice, carrying potentially immunomodulatory metabolites into the …

Performance Evaluation Of Aminated Multi-Walled Carbon Nanotubes Incorporated With Green Synthesized Iron Nanoparticles For Toxic Dyes Sequestration From Textile Wastewater, Titus Chinedu Egbosiuba, Cynthia Chukwuemeka, Jonah Chukwudi Umeuzuegbu, Nwanneka Chibuzo Mmonwuba, Ugochukwu Ewuzie, Monday Uchenna Okoronkwo, Valentine Chikaodili Anadebe, Saheed Mustapha, Ambali Saka Abdulkareem, Jimoh Oladejo Tijani, Ashish Patel, Virendra Kumar Yadav

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study evaluates the performance of aminated multi-walled carbon nanotubes (AM-MWCNTs) integrated with zerovalent iron nanoparticles (ZVI) synthesized using cashew leaf (Anacardium occidentale) extract (AM-MWCNTs@ZVI) for the removal of Congo Red (CR) and Methylene Blue (MB) dyes from textile industrial wastewater. The nanocomposite was characterized using FTIR, XRD, BET, HRSEM, and HRTEM analyses, confirming its functional groups, crystalline structure, and enhanced surface area of 1050.4 m²/g. The ecological risk degree of the textile pollutants was assessed to determine the percentage concentrations of crystal violet, Congo red, methyl orange, methylene blue and rhodamine B. Batch adsorption experiments identified optimal …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

An Inquiry Into The Physics Of Mixing And Floc Filtration, Andrew P. Pennock

Dissertations

Flocculation and clarification are two essential processes to deliver safe water at a reasonable cost to consumers. There are two major thrusts to the research presented in this dissertation. The first is to better characterize the physics and mixing parameters used for the design of hydraulic flocculators in the context of drinking water treatment plants. The second major thrust is to investigate floc filtration as a mechanism for the removal of primary particles during floc blanket clarification.

The intensity of mixing in environmental and chemical engineering applications is often characterized by the Camp and Stein velocity gradient. This parameter has …

Understanding The Morphology And Mass Transport Resistance Of Mesoporous Carbon-Supported Pemfc Based On Modeling Analysis, Hao Deng, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Mesoporous carbon supports mitigate Pt sulfonic poisoning through nanopore-confined Pt deposition, yet their morphological impacts on oxygen transport remain unclear. This study integrates carbon support morphology simulation with an enhanced agglomerate model to establish a mathematical framework elucidating pore evolution, Pt utilization, and oxygen transport in catalyst layers. Results demonstrate dominant local mass transport resistance governed by three factors: (1) active site density dictating oxygen flux; (2) ionomer film thickness defining shortest transport path; (3) ionomer-to-Pt surface area ratio modulating practical pathway length. At low ionomer-to-carbon (I/C) ratios, limited active sites elevate resistance (Factor 1 dominant). Higher I/C ratios improve …

Preparation And Modification Of Mxene Composites For Application In Electrochemical Energy Storage, Zhang-Hai You, Ding-Ze Lu, Kiran Kumar Kondamareddy, Wen-Ju Gu, Peng-Fei Cheng, Jing-Xuan Yang, Rui Zheng, Hong-Mei Wang

Journal of Electrochemistry

With the acceleration of advanced industrialization and urbanization, the environment is deteriorating rapidly, and non-renewable energy resources are depleted. The gradual advent of potential clean energy storage technologies is particularly urgent. Electrochemical energy storage technologies have been widely used in multiple fields, especially supercapacitors and rechargeable batteries, as vital elements of storing renewable energy. In recent years, two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties, large specific surface area, and tunability. Based on the layered materials of MXene, researchers have successfully achieved the dual functions of energy storage and …

Theoretical Insights Into The Atomic And Electronic Structures Of Polyperyleneimide: On The Origin Of Photocatalytic Oxygen Evolution Activity, Yi-Qing Wang, Zhi Lin, Ming-Tao Li, Shao-Hua Shen

Journal of Electrochemistry

Polymeric perylene diimide (PDI) has been evidenced as a good candidate for photocatalytic water oxidation, yet the origin of the photocatalytic oxygen evolution activity remains unclear and needs further exploration. Herein, with crystal and atomic structures of the self-assembled PDI revealed from the X-ray diffraction pattern, the electronic structure is theoretically illustrated by the first-principles density functional theory calculations, suggesting the suitable band structure and the direct electronic transition for efficient photocatalytic oxygen evolution over PDI. It is confirmed that the carbonyl O atoms on the conjugation structure serve as the active sites for oxygen evolution reaction by the crystal …

Three-Dimensional Melamine Carbon Sponge/Nai As Cathode Materials For Sodium-Ion Batteries, Qian-Ying Huang, Yue Liu, Zi-Xin Lin, Shu-Yi Zheng, Ting-Ting Mei, Yu-Ting Tang, Ying-He Zhang, Jun Liu

Journal of Electrochemistry

The sodium-iodine (Na-I) battery exhibits significant potential as an alternative energy storage device to the lithium-ion battery. However, its development is hindered by inadequate electrical and thermal stability, as well as the dissolution and shuttling of polyiodide. In this study, we report a preparation method for melamine carbon sponge (MC) via carbonizing a commercially available kitchen sponge. It was revealed that the as-prepared MC, composed of unique self-growing carbon nanotubes, could provide both physical and chemical adsorption capabilities for intermediate polyiodides to improve the electrochemical performance of NaI. Consequently, the NaI/MC electrode effectively minimized polyiodide dissolution and reduced the electrochemical …

Optimization Of Renewable Energy Systems: Comparative Analysis Of Advanced Algorithms And Photovoltaic-Electrolyzer Performance For Cost Reduction And Efficiency Enhancement, Mohamed-Amine Babay, Mustapha Adar, Ahmed Chebak, Mustapha Mabroukia

Journal of Electrochemistry

The increasing demand for cost-effective and efficient renewable energy solutions presents significant optimization challenges in hybrid energy systems. This paper addresses these challenges by conducting a comparative analysis of three advanced optimization algorithms—Lévy Flight Optimization (LFO), Archimedean Optimization (AO), and Quantum Gorilla Optimization (QGO)—to minimize the Total Net Present Cost (TNPC) and Levelized Cost of Energy (LCOE) in hybrid renewable energy systems. The study integrates critical cost parameters such as Capital Expenditure (CAPEX), Operational Expenditure (OPEX), replacement costs, and salvage values into an advanced optimization framework. Three system configurations are evaluated: Wind Turbines and Fuel Cells (WT/FC), Photovoltaic Systems and …

Development Of Non-Precious Iron-Cobalt Alloy Catalyst For Electrocatalytic Reaction, Harsh Panchal

Electronic Theses & Dissertations

The development of a FeCo alloy catalyst with tunable Fe/Co ratios is examined to improve electrocatalytic performance in reactions like the oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and oxygen reduction reaction (ORR). Many energy conversion devices, such as fuel cells, metal-air batteries, and water-splitting systems, depend on these interactions to function. These technologies have huge potential to meet the increasing need for hydrogen production and renewable energy sources worldwide, which are critical to attaining a sustainable energy future. When compared with noble metal-based catalysts, the FeCo alloy catalyst shows much higher catalytic activity, according to previous studies. Hydrothermal …

First-Principles Studies Of Electrical Polarization Effects In Ferroelectrics, Antiferroelectrics And Defects, Louis Alaerts

Dartmouth College Ph.D Dissertations

Over the last few decades, density functional theory (DFT) has emerged as a formidable tool in the field of computational material science. Not only has it become a complementary method approach to experiments by rationalizing the many complex properties of materials but its formidable predictive power can also be used to identify the most promising candidates for specific applications. Point defects in semiconductors have become an important platform for the development of quantum networks due to their ability to act as spin-photon interfaces. Spectral diffusion, the broadening of the optical emission line, can significantly impact the performance of these defect-based …

Toxicity And Biodegradability Of Novel Boronium Vs Conventional Ammonium Based Anti Microbial Compounds In Wastewater Treatment Systems, Noor Shalan

Poster Presentations

Quaternary ammonium compounds (QACs) are highly effective as disinfectants, herbicides, and pesticides; thus, overuse causes elevated levels of residual toxicity in domestic and industrial wastewater. QACs can be toxic to essential bacteria breaking down pollutants in wastewater treatment plants (WWTPs) and can remain untreated in effluent, harming the environment, and contributing to antibiotic resistance, posing risks to human health. Novel boronium-based antimicrobial compounds have demonstrated efficacy in eliminating bacteria, fungi, and viruses. If the boronium compounds exhibit lower residual toxicity, they could offer a promising alternative to QACs. Because these compounds are still in development, their potential toxicity to the …

Using Gaussian Process Regression To Learn Thermodynamic Equations Of State With Uncertainty Quantification, Austen T. Lee

Chemical Engineering Undergraduate Honors Theses

This study investigates the use of derivative-informed Gaussian Process (GP) models to estimate thermodynamic behavior across temperature and density by building a Helmholtz-based equation of state. Argon, a stable monatomic gas, was chosen as a case study within the vapor region. The GP model was trained using values of experimentally measurable properties found by taking first and second derivatives of the original potential function. Results show that while the GP model offered uncertainty quantification and informed thermodynamic behavior, it predicted values that deviated from the ground truth depending on the property. The model exhibited high confidence in regions with substantial …

Electrodeposition Of Gallium Nitride_Unraveling The Role Of Precursors, Deposition Conditions, And Substrate Effects For Semiconductor Applications, Mauricio Azier Leyva Aranzabal

Open Access Theses & Dissertations

Gallium nitride (GaN) is a wide-bandgap semiconductor noted for its remarkable optoelectronic and structural characteristics, rendering it a potential material for high-power, high-frequency, and optoelectronic device applications. This dissertation investigates the electrochemical synthesis of GaN thin films by potentiostatic and galvanostatic electrodeposition techniques using aqueous solutions of gallium nitrate (Ga(NO3)3), ammonium nitrate (NH4NO3), and auxiliary agents like potassium nitrate and urea. The main aim is to examine the essential elements affecting nitrogen incorporation and film shape while assessing electrochemical performance on various conductive substrates.A thorough investigation was performed to evaluate the impacts of electrodeposition duration, electrolyte pH, precursor molar concentrations, …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Composition And Rich/Lean Loading-Dependent Density Measurements Of A Series Of Aqueous Ionic Amines For Co2 Capture, Claudia Nguyen

Honors Theses

As climate change worsens worldwide, there is a drive to develop more efficient and sustainable methods to mitigate its impact through carbon capture methods like carbon dioxide scrubbing. Carbon scrubbing directly captures carbon dioxide (CO2) emissions from industries or power plants before they are released into the environment. The CO2 captured can be utilized for various applications or can be stored underground. However, this method faces numerous challenges, such as the degradation of the solvent or corrosion of equipment. As a result, research has expanded to find a better medium to overcome these issues. In particular, aqueous ionic amines (AIA) …