Chemistry Commons^™

Development Of A Mesothelin-Binding Engineered Scaffold Protein As A Theranostic For Pleural Mesothelioma, Roberto Silvestri, Margherita Piccardi, Alessia Laurenza, Filomena Rea, Allison R. Sirois, Martina Lari, Francesco Bartoli, Giovanni Signore, Lorena Tedeschi, Elisabetta Ferraro, Paola Anna Erba, Roberto Giovannoni, Stefano Landi, Federica Gemignani, Sarah J. Moore

Engineering: Faculty Publications

Mesothelin (MSLN) is a tumor biomarker expressed at high levels on the surface of numerous cancers with extremely limited expression in healthy tissues. MSLN-targeting agents developed for diagnosis and therapy could have a significant impact on the management of MSLN-expressing cancers. Pleural mesothelioma (PM) is a deadly cancer that arises from mesothelial cells lining the pleura and is predominantly linked to asbestos exposure. There are currently no effective treatments, and diagnosis occurs in late stages of disease due to the lack of clinical symptoms in the early stages. Recent efforts to diagnose and treat PM have focused on identifying and …

A New Low-Rate Stable Hydrogel Cathode For Aqueous Zn-Ion Batteries, Roya Rajabi, Shichen Sun, Jamil A. Khan, Morgan Stefik, Kevin Huang

Faculty Publications

Aqueous Zn-ion batteries (ZIBs) are attractive candidates for large-scale energy storage owing to the abundance, low cost, and intrinsic safety of Zn metal. However, their practical application is hindered by poor cycle stability, especially at low current densities, due to cathode dissolution and limited electrochemically active sites (EAS). Herein, a hydrogel-based cathode comprising ammonium vanadate, carbon black, and a Zn-ion-conducting carboxymethyl chitosan–acrylamide hydrogel matrix doped with Zn(ClO4)2 is reported. This design establishes a continuous Zn-ion-conducting network, thereby maximizing EAS density throughout the electrode volume. The ZIB with the hydrogel cathode exhibits outstanding cycling stability, with 77% capacity retention after 2000 …

An Integrated Pcb-Based Heating And Auto-Ranging Platform For Volatile Organic Compound (Voc) Detection Using Carbon Nanotube Based Sensors, Thomas Kalach

USF Tampa Graduate Theses and Dissertations

This thesis presents the development, characterization, and integration of a novel low-cost, high-dynamic-range sensor platform for the detection of volatile organic compounds (VOCs), leveraging the unique electrical properties of carbon nanotube (CNT) thin films. The platform introduces a fully integrated auto-ranging analog front-end circuit capable of real-time resistance measurement spanning over eight orders of magnitude ranging from tens of ohms to hundreds of megaohms, without compromising signal resolution or precision. This was achieved through a digitally controlled, multi-path feedback architecture and controllable current source.

To further enhance sensor performance, the system incorporates a copper trace heater beneath the sensor array, …

Day-Night Shifts In Water-Soluble Ions Of Size-Resolved Aerosols Before And After The Covid-19 Lockdown In A Coastal Megacity: Metro Manila, Philippines, Grace Betito, Paola Angela Bañaga, Rachel A. Braun, Maria Obiminda Cambaliza, Melliza Templonuevo Cruz, Alexander B. Macdonald, James Bernard Simpas, Connor Stahl, Armin Sooroshian

SOSE Affiliate: Manila Observatory

The COVID-19 pandemic-driven lockdowns offer a unique opportunity to examine how reductions in anthropogenic emissions impacted atmospheric aerosol composition in urban environments. This study investigates the day-night variability of size-resolved water-soluble ions in ambient particulate matter (PM) collected in Metro Manila before (November 2019–February 2020) and after (November 2020–February 2021) lockdown implementation. Using tandem Micro-Orifice Uniform Deposit Impactors (MOUDIs), aerosol samples were collected during daytime (06:00–18:00) and nighttime (18:00–06:00) periods and analyzed for key ionic species (sulfate, ammonium, nitrate, oxalate, sodium, chloride, calcium, and magnesium) via ion chromatography. Submicrometer water-soluble mass declined post-lockdown, particularly during daytime, reflecting suppressed secondary formation …

Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

To understand the applicability of high-temperature preformed particle gel (HT-PPG) for control of short-circuiting in enhanced geothermal systems (EGSs), core flooding experiments were conducted on fractured granite cores under varying fracture widths, gel particle sizes and swelling ratios. Key parameters such as injection pressure, water breakthrough pressure, and residual resistance factor were measured to evaluate HT-PPG performance. The gel exhibited strong injectability, entering granite fractures at pressure gradients as low as 0.656 MPa/m; HT-PPG yields a superior sealing performance by significantly reducing the permeability; and dehydration occurs during HT-PPG propagation, with a dehydration ratio ranging from 4.71% to 11.36%. This …

Bridging Materials And Energy Storage Mechanisms In Zn-I2 Batteries, Rong-Qi Liu, Wen-Shuo Shang, Jin-Tao Zhang

Journal of Electrochemistry

Zinc-iodine (Zn-I₂) batteries have emerged as a compelling candidate for large-scale energy storage, driven by the growing demand for safe, cost-effective, and sustainable alternatives to conventional systems. Benefiting from the inherent advantages of aqueous electrolytes and zinc metal anodes, including high ionic conductivity, low flammability, natural abundance, and high volumetric capacity, Zn-I₂ batteries offer significant potential for grid-level deployment. This review provides a comprehensive overview of recent progress in three critical domains: positive-electrode engineering, zinc anode stabilization, and in situ characterization methods. On the cathode side, anchoring iodine to conductive matrices effectively mitigates polyiodide shuttling and enhances …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (2/4): Report 2: High-Performance Water Splitting Electrocatalysts, Ling Zhang, Wang-Yang Wu, Qiu-Yue Hu, Shi-Dan Yang, Li Li, Rui-Jin Liao, Zi-Dong Wei

Journal of Electrochemistry

The unavailability of high-performance and cost-effective electrocatalysts has impeded the large-scale deployment of alkaline water electrolyzers. Professor Zidong Wei’s group has focused on resolving critical challenges in industrial alkaline electrolysis, particularly elucidating hydrogen and oxygen evolution reaction (HER/OER) mechanisms while addressing the persistent activity-stability trade-off. This review summarizes their decade-long progress in developing advanced electrodes, analyzing the origins of sluggish alkaline HER kinetics and OER stability limitations. Professor Wei proposes a unifying “12345 Principle” as an optimization framework. For HER electrocatalysts, they have identified that metal/metal oxide interfaces create synergistic “chimney effect” and “local electric field enhancement effect”, enhancing selective …

Local Electric Fields Coupled With Cl− Fixation Strategy For Improving Seawater Oxygen Reduction Reaction Performance, Yu-Rong Liu, Miao Zhang, Yan-Hui Yu, Ya-Lin Liu, Jing Li, Xiao-Dong Shi, Zhen-Ye Kang, Dao-Xiong Wu, Peng Rao, Ying Liang, Xin-Long Tian

Journal of Electrochemistry

Development of robust electrocatalyst for oxygen reduction reaction (ORR) in a seawater electrolyte is the key to realize seawater electrolyte-based zinc-air batteries (SZABs). Herein, constructing a local electric field coupled with chloride ions (Cl⁻) fixation strategy in dual single-atom catalysts (DSACs) was proposed, and the resultant catalyst delivered considerable ORR performance in a seawater electrolyte, with a high half-wave potential (E_1/2) of 0.868 V and a good maximum power density (Pmax) of 182 mW·cm⁻² in the assembled SZABs, much higher than those of the Pt/C catalyst (E_1/2: 0.846 V; Pmax: 150 mW·cm^{−2 …}

Significantly Enhanced Oxygen Reduction Reaction Activity In Co-N-C Catalysts Through Synergistic Boron Doping, Chang Lan, Jing-Sen Bai, Xin Guan, Shuo Wang, Nan-Shu Zhang, Yu-Qing Cheng, Jin-Jing Tao, Yu-Yi Chu, Mei-Ling Xiao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance disparity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction (ORR). In this work, we strategically engineer the active site structure of Co-N-C via B substitution, which is accomplished by the pyrolysis of ammonium borate. During this process, the in-situ generated NH₃ gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure. The well-designed CoB₁N₃ active site endows Co with higher charge density and stronger adsorption energy toward oxygen species, …

Antibacterial Activity Of Zno/Geopolymer Composite Granules And Their Potential Application In Water Treatment, Ziyan Tirta Maulitia, Putri Nur Angelina, Pipit Erlita Sari, Sri Sugiarti, Irma Isnafia Arief, Zaenal Abidin

Makara Journal of Science

Water pollution has become a major global concern owing to its complexity and widespread impact. Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) are the most common bacterial contaminants in water sources, which pose significant threats to public health. To mitigate water contamination by these pathogenic microorganisms, developing and implementing effective water treatment technologies are essential. A promising approach involves using antibacterial water filtration systems. Herein, zinc oxide (ZnO) nanoparticles were synthesized via hydrothermal and precipitation methods as antibacterial agents for water treatment. These preparation methods required considerably low synthesis time. A capping agent was …

The Effect Of Ozone Treatment On The Quality Of Biodiesel From Waste Cooking Oil, Sri Redjeki Setyawati, Singgih Wibowo

Makara Journal of Science

This research demonstrates the successful production of biodiesel from waste cooking oil (WCO) using the transesterification method. A methoxide solution, formed by employing a base catalyst and alcohol, facilitated the conversion of triglycerides into methyl esters and glycerol as the byproduct. The conversion process yielded 74% biodiesel and 13.5% glycerol content, with the remaining proportion consisting of water and contaminants. The application of ozone (O₃) aeration proved effective in reducing contaminants—such as alcohol, unreacted catalysts, food residues and water—by approximately 60%. Furthermore, Fourier transform infrared (FTIR) testing affirmed that the biodiesel product—treated with O₃ aeration—maintained its original …

Effect Of Varying Chitosan Molecular Weights On The Morphology And Physical Characteristics Of Pva/Chitosan Composite Hydrogels, Yuan Alfinsyah Sihombing, Halida Rahmi Luthfianti, William Xaveriano Waresindo, Marathur Rodhiyah, Nur’Aini Nafisah, Dian Ahmad Hapidin, Dhewa Edikresnha, Khairurrijal Khairurrijal

Makara Journal of Science

We employed the innovative freeze–thaw method to investigate the effect of chitosan (CS) molecular weights incorporated into polyvinyl alcohol on the morphology and physical characteristics of the hydrogel. This study aimed to unravel the intricate relationships between CS molecular weight variations, CS concentration, and the number of freeze–thaw cycles (4 or 6 cycles) on hydrogel swelling degree and weight loss. Incorporating CS improved the hydrogel structure and enhanced its porosity, resulting in remarkable increases in swelling degree ranging from 2 to 6 times the initial weight. Higher molecular weight CS (310,000–375,000 Da) exhibited a lower swelling degree than medium molecular …

Synergetic Adsorptive Mechanisms, Reusability And Cost Evaluations Of Green Fabricated Hybrid Barium Cobalt Nanocomposites For Methylene Blue And Lead Removal From Wastewater, Titus Chinedu Egbosiuba, Chibuike Christogonus Njoku, Ijeoma Jacinta Ani, Godwin Ifeanyi Ogbuehi, Abdulkareem Omeiza Yusuf, Abiodun Azeez Saka, Ugochukwu Ewuzie, Ebuka Emmanuel Ezennajiego, Blessing Onyinye Okafor, Walter Chibuike Anene, Cecilia Chika Unegbu, Florence Acha, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Barium nanoparticles (BaNPs), cobalt nanoparticles (CoNPs), and hybrid barium-cobalt nanocomposites (BaCoNCs) were synthesized using an eco-friendly green technique with Anacardium occidentale leaf extract for sequestration of methylene blue (MB) dye and lead (Pb (II)) ions from industrial wastewater. The nanoparticles and nanocomposites were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), and Brunauer-Emmett-Teller (BET) analysis to assess their functional groups, crystalline structure, morphology, and surface properties, confirming successful synthesis. Batch adsorption studies showed that optimal pollutant removal occurred at pH values of 8 for MB and 5 for Pb(II), with a contact time …

Comprehensive Review Of In Vitro Approaches For Environmental Heavy Metal Exposure, Manas Warke, Madeline English, Camila Padilla, Lexie Gasco, Wendy Leisner, Rupali Datta, Smitha Rao

Michigan Tech Publications

Heavy metals are ubiquitous environmental pollutants, contaminating air, soil, and water via the erosion of natural deposits, as well as originating from anthropogenic sources, such as agriculture, industries, transportation, and landfills. The increasing utilization of heavy metals over the years, combined with the persistent nature of metals in the environment poses a direct threat to human and environment health. Although regulatory limits have been established for toxic metals, assessing the associated health risks using real-life exposure scenarios remains challenging. In this review, we summarize the development and use of in vitro models based two- and three-dimensional cell culture systems, focusing …

Validation And Proposed Expansion Of The Data-Driven D Region Model, Kevin M. Watson

Theses and Dissertations

Predicting ionosphere effects on radio wave propagation is critical for communications and over-the-horizon radar systems. The D region is challenging to model for several reasons, one of which is chemical complexity. Ion density changes during sunrise/sunset introduce substantial uncertainty in electron density profiles (EDPs). The Data Driven D Region (D3R) model solves electron densities through an ion chemistry model and assimilates relevant space weather inputs. This study evaluates D3R against the Faraday International Reference Ionosphere (FIRI) and measurements using Very Low Frequency (VLF) propagation paths. Space weather event impacts on D3R EDPs are evaluated during the disturbed period from 8-12 …

Low-Cost Cutaneous Protoporphyrin Ix (Ppix) Detection (Cpd) Device For Follow-Up Monitoring Of Patients After Photodynamic Therapy, Md Asaduzzaman Rasel

Graduate Masters Theses

Background: Photodynamic Therapy (PDT) utilizes specific wavelengths of light to activate photosensitizing chemical compounds, known as photosensitizers, which induce the generation of cytotoxic reactive oxygen species (ROS) for the targeted destruction of cancer cells. Among various photosensitizers for PDT, Protoporphyrin IX (PpIX) is widely employed in oncology and dermatology due to its natural in situ generation via the metabolic conversion of 5- aminolevulinic acid (ALA), a non-phototoxic prodrug. Systemic administration of ALA after 3-6 hr drug delay leads to peak PpIX accumulation in tissues, facilitating therapeutic and diagnostic applications. However, PpIX can persist in the skin for 24–48 hours post-treatment, …

Superhydrophilic Porous Coooh Nano-Architecture With Abundant Oxygen Vacancies For Enhanced Urea Electrooxidation At Ampere-Level Current Densities, Wen-Jing Lv, Xiao-Man Tang, Xue-Tong Wang, Wen-Cai Liu, Jian-Wen Zhu, Guo-Jing Wang, Yuan-Zhi Zhu

Journal of Electrochemistry

The conversion of urea-containing wastewater into clean hydrogen energy has gained increasing attention. However, challenges remain, particularly with sluggish catalytic kinetics and limited long-term stability of urea oxidation reaction (UOR). Herein, we report the loosely porous CoOOH nano-architecture (CoOOH LPNAs) with hydrophilic surface and abundant oxygen vacancies (O_v) on carbon fiber paper (CFP) by electrochemical reconstruction of the CoP nanoneedles precursor. The resulting three-dimensional electrode exhibited an impressively low potential of 1.38 V at 1000 mA·cm⁻² and excellent durability for UOR. Furthermore, when tested in an anion exchange membrane (AEM) electrolyzer, it required only 1.53 V at …

Structure Regulation Engineering For Biomass-Derived Carbon Anodes Enabling High-Rate Dual-Ion Batteries, Rui Zhou, Rui Liu, Yun-Nuo Li, Si-Jie Jiang, Tian-Tian Jing, Yan-Song Xu, Fei-Fei Cao

Journal of Electrochemistry

Dual-ion batteries (DIBs) usually use carbon-based materials as electrodes, showing advantages in high operating voltage, potential low cost, and environmental friendliness. Different from conventional “rocking chair” type secondary batteries, DIBs perform a unique working mechanism, which employ both cation and anion taking part in capacity contribution at an anode and a cathode, respectively, during electrochemical reactions. Graphite has been identified as a suitable cathode material for anion intercalation at high voltages (> 4.8 V) with fast reaction kinetics. However, the development of DIBs is being hindered by dynamic mismatch between a cathode and an anode due to sluggish Li^{+ …}

Design And Optimization Of Anode Catalysts For Direct Ethanol Fuel Cells: Advances And Challenges In C-C Bond Activation And Selective Modulation Of The C1 Pathway, Kai-Chi Qin, Meng-Tian Huo, Yu Liang, Si-Yuan Zhu, Zi-Hao Xing, Jin-Fa Chang

Journal of Electrochemistry

Direct ethanol fuel cells (DEFCs) are a promising alternative to conventional energy sources, offering high energy density, environmental sustainability, and operational safety. Compared to methanol fuel cells, DEFCs exhibit lower toxicity and a more mature preparation process. Unlike hydrogen fuel cells, DEFCs provide superior storage and transport feasibility, as well as cost-effectiveness, significantly enhancing their commercial viability. However, the stable C–C bond in ethanol creates a high activation energy barrier, often resulting in incomplete electrooxidation. Current commercial platinum (Pt)- and palladium (Pd)-based catalysts demonstrate low C–C bond cleavage efficiency (

Effect Of Saccharin On Crystallization Behavior Of Electroless Cobalt Plating, Yu-Xin Luo, Jing-Jing Wang, Lu Wang, Zi-Yi Yan, Yi Ma, Xin Bo, Jing-Shuang Dang, Zeng-Lin Wang

Journal of Electrochemistry

In the process of electroless cobalt plating, the saccharin additive can significantly change the surface morphology, texture orientation, and conductivity of the cobalt coating layer. When the amount of saccharin was 3 mg·L^–1, the cobalt coating transformed from disordered large grains to a honeycomb structure, with a preferred orientation of (002) facet on hexagonal close-packed (HCP) cobalt crystals. The resistivity of the cobalt film decreased to 14.4 μΩ·cm, and further decreased to 10.7 μΩ·cm after the annealing treatment. When the concentration of saccharin was increased, the grain size was gradually refined and a “stone forest” structure was observed, …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Correlation Between Microstructure And Hardfacing Properties With Welding Current Intensity In Reconditioned Low-Alloy Steel Material Using Submerged Arc Welding (Saw) : A Comprehensive Review, Iman Nugraha Asmara, Winarto Winarto

Journal of Materials Exploration and Findings

This review studying the correlation between microstructural transformations and mechanical properties in reconditioned low-allow steel material, focusing on the impact of Submerged Arc Welding (SAW) parameters, especially current, on microstructure . The study highlights how variation on welding parameters, especially current intensity variation, affecting microstructural transformations, hardness, and wear resistance of hardfaced layers. Key aspects such as dilution effect, phases distribution, and carbide formation are reviewed to understanding their impact on mechanical properties. By reviewing insights from existing literature and experimental findings, this review underscores the role of Submerged Arc Welding in enhancing mechanical properties and microstructural of low-alloy steel …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Wear Of High Entropy Alloys: Understanding Effects Of Cryogenic Temperatures And Surface Nitriding On Wear Behavior, Aubrey Yu Tang

Dartmouth College Ph.D Dissertations

Cryogenic tribological applications have become increasingly important with the development and innovation of advanced equipment in aerospace, polar regions, superconductivity, and more. Traditional lubrication methods are not viable under these harsh environments, so metallic materials must be able to maintain excellent mechanical properties and withstand the constant impact and wear alone. High entropy alloys (HEAs) have emerged as potential candidates for these applications because of their wide variety of excellent room temperature properties and apparent improvement of mechanical properties of some HEAs at extremely low temperatures. Despite their promising nature, very limited work has been done on understanding the wear …

64th Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 64th annual meeting of the Rocky Mountain Conference on Magnetic Resonance. Held in the Snowbird Resort and Conference Center, Snowbird, Utah, August 3-7, 2025.

Assembly Of Non-Close-Packed Poly(N-Isopropylacrylamide) Microgels On Metal Halide Perovskite Films, Amal Alruwaili, Osama M. Alkhudhari, Ran Wang, Zhenyu Jia, Jennifer M. Saunders, Eugenio Picheo, Daniel T.W. Toolan, L. Andrew Lyon, Brian R. Saunders

Engineering Faculty Articles and Research

Hypothesis

Experiments

Understanding Structure-Property Relationships Within Polyolefin-Derived Vitrimer Systems, Mikaela Sadri

Dissertations

Polyolefins are extremely ubiquitous materials due to their satisfactory material properties, ease of synthesis, and low cost. Unfortunately, their extensive use has led to a global plastic waste mismanagement problem. As such, notable efforts have recently focused on converting these commodity polymers into vitrimers, or dynamic networks, to extend their use-life and tailor their properties. However, the fundamental polymer physics of these emerging materials, remain largely underexplored, hindering their widespread implementation. To address this challenge and enable a more sustainable future, the overarching goal of my dissertation research is to understand the fundamental structure-property relationships within complex polyolefin-derived vitrimer systems. …

Visceral, Neural, And Immunotoxicity Of Per- And Polyfluoroalkyl Substances: A Mini Review, Pietro Martano, Samira Mahdi, Tong Zhou, Yasmin Barazandegan, Rebecca Iha, Hannah Do, Joel Burken, Paul Ki-Souk Nam, Qingbo Yang, Ruipu Mu

Chemistry Faculty Research & Creative Works

Per- and polyfluoroalkyl substances (PFASs) have gained significant attention due to their widespread distribution in the environment and potential adverse health effects. While ingestion, especially through contaminated drinking water, is considered the primary route of human exposure, recent research suggests that other pathways, such as inhalation and dermal absorption, also play a significant role. This review provides a concise overview of the toxicological impacts of both legacy and emerging PFASs, such as GenX and perfluoro butane sulfonic acid (PFBS), with a particular focus on their effects on the liver, kidneys, and immune and nervous systems, based on findings from recent …