Physical Sciences and Mathematics Commons^™

Analysis Of A Focus Log Electrode In A Non Homogeneous Medium, John Julian Zenor

Doctoral Dissertations

"The mathematical model presented for the focused logging system is applicable to any resistance logging tool of the electrode type. Horizontal or cylindrical resistance interfaces may be included in any combinations. The tool and its environment are compartmentalized, and the integral form of the condition for continuity of current is applied to each compartment. Acceleration methods are applied to the iterative solution of the resulting large-scale system of linear equations. Two specific models are presented, one for the study of the effects of invasion and the other for the study of the effects of bed thickness on the apparent resistivity …

Hrva - A Velocity Analysis Technique For Seismic Data, John Charles Robinson

Doctoral Dissertations

"A High-Resolution Velocity Analysis (HRVA) has been developed for the determination of the root-mean-square subsurface-velocity energy spectrum from gated seismic data which has been normal-moveout corrected. All calculations are performed in the frequency-space or frequency-wavenumber domain; seismic gates are transformed from the time-space domain via the Fast Fourier Transform algorithm. HRVA is not restricted to the investigation of apparent horizontal velocities which have associated stepout values that are integral multiples of the time sampling interval, as are the existing correlation techniques. The technique liberally exploits the inexistence of significant energy in the higher frequency harmonies of seismic data, resulting in …

The Role Of The Doctor Of Engineering Degree In Graduate Education, Wouter Bosch, Robert E. Carlile

Chemistry Faculty Research & Creative Works

No abstract provided.

Handlos And Baron Model: Short Contact Times, J. Patel, Robert M. Wellek

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

The Anodic Dissolution Of Cadmium, James W. Johnson, E. Deng, S. C. Lai, William Joseph James

Chemical and Biochemical Engineering Faculty Research & Creative Works

The anodic dissolution of cadmium has been studied in aqueous solutions containing Cl−, Br−, I−, Ac−, SO₄=, and NO3− ions. The normal valence (+2) was found in all solutions with the exception of NO₃−. The apparent valence (calculated) of cadmium ions in nitrate solutions varied from 1.2 to 2.0 and was found to be a function of NO₃− concentration, current density, and temperature. An anodic dissolution mechanism has been proposed involving local corrosion and disintegration of the anode which is consistent with the experimental results. © 1967, The Electrochemical Society, Inc. All rights reserved.

Radial Pressure Gradient In Turbulent Pipe Flow, Gary Kent Patterson, Walter J. Ewbank, Virgil A. Sandborn

Chemical and Biochemical Engineering Faculty Research & Creative Works

Measurements made with a Prandtl static pressure probe have demonstrated that a radial pressure gradient does exist in turbulent pipe flow with approximately the magnitude predicted by Sandborn from hot-wire anemometry measurements.

The Mechanism Of The Electrooxidation Of Acetylene On Gold, James W. Johnson, J. L. Reed, William Joseph James

Chemical and Biochemical Engineering Faculty Research & Creative Works

Acetylene has been oxidized anodically in aqueous solutions at 80 °C on gold electrodes. It was found that the partial oxidation to CO₂ was accompanied by a polymer formation. Effects of potential, acetylene partial pressure, pH, and temperature on the rate (current) were measured. A discontinuity in the Tafel curves was noted that indicated a change in the reaction mechanism with potential. The discontinuity was also pH dependent. A mechanism involving the discharge of H₂O and/or OH− has been proposed that is consistent with the experimental results. © 1967, The Electrochemical Society, Inc. All rights reserved.

The Effect Of Concentration On The Viscosities Of Solutions Of Linear Flexible High Polymers, Lung Yu Chou, Jacques L. Zakin

Chemical and Biochemical Engineering Faculty Research & Creative Works

Viscosity-concentration results in the moderately concentrated range for four samples of polyisobutylene (molecular weights of 1.3 x 104 to 1.0 x 106) in cyclohexane (concentrations up to 4.7 g./dl.) and in benzene (concentrations up to 7.0 g./dl.) at 24°C. (a theta solvent) showed molecular weight and goodness of solvent dependencies similar to those reported earlier for three other polymers. For polyisobutylene, polystyrene, and a copolymer of styrene and methyl methaerylate in good solvents, viscosity-concentration data plotted as ηsp. C[η] vs. k′[η]C fit a single curve. The linear region of this curve suggests that the Huggins equation is useful to C[η] …

Estimation Of Regional Trends In Gravity Using Gram Orthogonal Polynomials, Stanley Dean Thompson

Masters Theses

"A computer program is presented which estimates the trend in a rectangular array of gravity measurements. It is assumed that the regional trend of gravity may be estimated by a low-order polynomial. The method of least-squares is applied to solve for the low-order polynomial which best approximates this trend. Gram orthogonal polynomials are used in the solution of this least-squares surface fit. The program is tested on a known polynomial and on some hypothetical Bouguer gravity data and found to approximate the ʺregional trend of gravity in these cases. The importance of eliminating any significant noise in the observations before …

Anodic Dissolution Of Zinc In Potassium Nitrate, Martin E. Straumanis, J. L. Reed, William Joseph James

Materials Science and Engineering Faculty Research & Creative Works

The apparent valence of pure zinc dissolving anodically in 3% KNO₃ was determined as a function of current density, temperature, and ultrasonic agitation. The apparent valence of zinc dissolving anodically at 24°C diminishes from 2.01 ± 0.01 at low current densities to 1.86 at about 50 ma and remains fairly constant up to about 80 ma cm−2. This valence is affected to some extent by the preparation, e.g., polishing of the electrode, but is independent of its structure (mono- or polycrystal). Ultrasonic vibrations do not influence the apparent valence at high current densities. In all cases a black film …

Two-Dimensional Seismic Model Studies, Joong Hee Chun

Masters Theses

"The purpose of this research was to design and construct apparatus suitable for two-dimensional seismic model studies.

A new technique for two-dimensional seismic model testing was devised which allows wide application of the equipment. This enabled the author to place the source and receiver in any desired position on the model, thereby permitting the recording of seismic events as function of distance and depth at any position

Two simple geometric models were tested to demonstrate the experimental range of the apparatus designed. The recorded data were compared with theoretical predictions and were found to be in good agreement"--Abstract, page ii.

A Mathematical Study Of Voigt Viscoelastic Love Wave Propagation, David Nuse Peacock

Masters Theses

"This research is a mathematical investigation of the propagation of a Love wave in a Voigt viscoelastic medium. A solution to the partial differential equation of motion is assumed and is shown to satisfy the three necessary boundary conditions. Velocity restrictions on the wave and the media are developed and are shown to be of the same form as those governing the elastic Love wave"--Abstract, page ii.

Water Resources Development -- An Analysis Of Economic Justification Practices Of The Corps Of Engineers, Kerwood W. Barrand

Masters Theses

"Presented herein is a brief analysis of the economic justification practices of the Corps of Engineers as commonly implemented in proposals concerning water resources projects. Where applicable, recommended methods are compared to similar methods advocated for, and accepted by, private engineering firms in similar situations.

The major problem exists in the lack of a profit motive in programs undertaken with the use of public funds. However, a profit can be said to have been realized in public works programs if the total benefits of the programs to all the people exceed the costs of these programs and, further, if the …

A Study Of The Effect Of Jointing On The Blasting Of Granite, Graniteville, Missouri, Avery Ala Drake

Masters Theses

"Purpose of investigation: The purpose of this investigation is to attempt to determine the influence that joints exert upon the blasting of granite and if joints are induced by blasting. The problem grew out of an explosive evaluation project that was conducted by the Mining Department, Missouri School of Mines. In late May 1950, the project was moved into the granite area near Graniteville, Missouri. It became apparent upon study of this area that the jointing would have certain effects upon the results obtained. Dr. J. D. Forrester, Chairman, Department of Mining Engineering, Missouri School of Mines, Rolla, Missouri, suggested …

Pyrochemical Changes In Missouri Halloysite, Frank Joseph Zvanut

Doctoral Dissertations

"For centuries it has been known that the application of heat to a clay or a clay body produces changes that make it an entirely different substance from the original raw clay. Ever since the earliest civilizations produced crude building brick by baking formed clay bodies in the sun's rays, mankind has been speculating on the nature of the changes that convert soft, friable, plastic clays into hard, strong, non-plastic, rock-like masses. It has been only within the last two decades, however, that progress has been made in the solution of problems dealing with the resultant products in fired clay …

Flotation Applied To Silicate Sludge, Yaro Klepel, Greene Erskine

Bachelors Theses

"Within the past few years great success has been made of the flotation of sulfids, and to a certain extent of carbonates.

Since sulfids are easily recovered by flotation it seems practicable that silicates could be made to float by first sulfidizing them, and then subjecting them to ordinary flotation treatment.

This problem involves the treatment of a silicate sludge obtained from the Joplin district, the sludge will easily pass through a 250 mesh screen. At the present time this sludge is being sent to the tailings pond.

The experimental work of this thesis was done along the line of …

Design Of A Lead Blast Furnace, Walter Irving Phillips, Andrew Jackson Seltzer

Bachelors Theses

"In order to get the approximate size of the Furnace we made the following assumptions, being guided as far as possible by the practice of the Globe Smelting Works at Denver, Colorado whenever that could be ascertained"--page 1.

Analytical Determination Of Copper Products, Charles Dosh Smith

Bachelors Theses

"It is a well known fact that the presence of impurities in copper products has been a source of annoyance to the Chemist. The object of this thesis was to make myself familiar with the actions of different impurities in copper products, and the methods for the determination of Arsenic in the same"--page 1.

Neutralization Of Free Acid (H₃P O₄) In Commercial Mono-Calcium Phosphate (Ca H₄ (Po₄), George William Harris, Harry Adam Grine

Bachelors Theses

"The object of this thesis has been a systematic research based on the characteristic properties and reactions of mono-calcium phosphate, Ca H₄ (PO₄)₂, tending towards the development of a process for neutralizing the free phosphoric acid, H₃PO₄ formed during its manufacture"--page 1.

Action Of Caustic Hydroxides Upon Aluminum, Herbert Fordyce. Rogers

Bachelors Theses

No abstract provided.

Assay Of Copper Matte For Gold And Silver, Walter E. Soest

Bachelors Theses

"Ores containing copper, and especially copper matte, have always been very annoying in assaying for the precious metals. In assaying copper matte, and ores containing much copper, by the usual method of scorification, the losses of silver an gold are considerable, owing to the fact that in order to obtain lead buttons, which are soft and free from copper, repeated scorifications are necessary, and moreover it is impossible to obtain lead buttons which are entirely free from copper"--page 1.

White Lead, Evans Walker Buskett

Bachelors Theses

No abstract provided.

Producer Gas, Edward P. Dwyer

Bachelors Theses

"Producer gas, so named owing to being produced in special forms of apparatus known as Producers. The fuel is decomposed into combustible gases, whereby most of the C is burnt to CO, whilst the H either remains free, or is converted into carburretted Hydrogen. Directly above the grate carbonic anhydride is formed but thus is rapidly converted into carbonic oxide; reaction as follows: CO₂ + C = 2CO.

Amongst these heavy carburetted hydrogen (C₂H₄) is that which principally increases the value of the gas as fuel and the drier the fuel used the more of the gas is produced. A …