Food Science Commons^™

Inactivation Of Salmonella In Black Peppercorn By Fluidization With Hydrogen Peroxide Vapor, Edel Summers

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The purpose of the present study was to assess the effectiveness of hydrogen peroxide vapor (HPV) at inactivating Salmonella inoculated in whole black pepper when used as fluidizing gas media. HPV treatment was conducted at two different temperatures (45°C and 60°C) and two dwell times (30 min and 60 min). Microbial reduction and residual hydrogen peroxide were measured at three storage times: 0 h (immediately after treatment), 24 h and 48 h post-treatment. The effect of HPV on the quality of whole black peppercorn was evaluated 48 h post-treatment based on changes in piperine content, total phenolics, antioxidant activity, total …

Potato Processing In The Home: Sustainability And Nutritional Impacts, Aubin Payne

Biological and Agricultural Engineering Undergraduate Honors Theses

Potatoes are the world's fourth most consumed crop. Their versatility and long shelf-life make them a staple food for millions of people worldwide. Still, the increasing consumption of highly processed potato products in developed countries has damaged the public's appreciation of potatoes as a valuable source of essential nutrients. Additionally, as public awareness of environmental sustainability increases, the average consumer is more likely to value processing methods that mitigate environmental damage.

Researchers simulated several home storage and processing conditions to find out how nutrition and environmental impact are affected by the home processing timeline. Then, a nutrient analysis, life cycle …

Development Of An Equation To Correlate Brite Tank Temperature And Pressure To Beverage Carbonation Concentration, Devyn Meyer

Biological and Agricultural Engineering Undergraduate Honors Theses

The Carbo Rock-It™ is an invention created to carbonate beverages at craft breweries. One of the Carbo Rock-It’s main features is that it does not add a significant volume of undissolved gas bubbles to the brite tank in which the beverage is carbonated. This may allow temperature and pressure readings from the brite tank to be used to determine the concentration of dissolved carbon dioxide in the beverage continuously in real time. This eliminates the need for manual samplings, which could save breweries time and allow for more controlled, accurate carbonation. The goal of this project was to develop an …

Vulnerable Vegetables And Efficient Fishers: A Study Of Primary Production Food Losses And Waste In Ireland, Tracey O'Connor, Rosanna Kleeman, Jennifer Attard

Publications

From 2022, the European Union Waste Framework Directive (WFD) requires member states to report annual food waste from each food supply chain stage. Comprehensive food losses and waste (FLW) data can be challenging to obtain for the primary production stage, i.e., farming and fishing. However, this information is vital in developing FLW mitigation actions appropriate to each country. This study describes the nature and extent of FLW from primary production in Ireland, using methods approved for WFD reporting. Causes of FLW and FLW as a proportion of total production were determined through interviews with Irish primary production stakeholders and using …

Autonomous Coffee Brewing System, Lillian Gonzalez, Landon Miller, Tyler Moff, Benjamin Vitu

Williams Honors College, Honors Research Projects

Coffee consumers want an affordable, high-quality cup of coffee that takes minimal time to brew and does not excessively contribute plastic to landfills. A fully autonomous system which utilizes whole coffee beans, water, and filters to brew coffee was designed to meet this need. This system accepts user requests which specify the brew’s portion size, water temperature, and brew strength, as well as the time which the system should begin the brewing process. Occasional maintenance to empty the system’s built-in waste receptacle or resupply the system with water, coffee beans, or filters is the only user intervention required. This report …

Sources Of Variability And Uncertainty In Food-Energy-Water Nexus Systems, Heydi Calderon-Ambelis, Deepak R. Keshwani

Department of Agricultural and Biological Systems Engineering: Faculty Publications

A nexus approach contributes to the strategic allocation of resources to secure food, energy, and water for the world population. Integrated models considering the complex interactions across food, energy, and water (FEW) enhance decision-making and strategic planning towards resilience. However, a significant number of the existing integrated models leave unaddressed the inherent variability and uncertainty present in the FEW sectors. Here, we review the importance of characterizing variability over spatial and temporal scales and the importance of decreasing the uncertainty present within a FEW nexus systems. The review also discusses existing modeling tools that address variability and uncertainty on single …

The Application Of Mathematical Optimization And Flavor-Detection Technologies For Modeling Aroma Of Hops, Yutong Liu

Department of Food Science and Technology: Dissertations, Theses, and Student Research

In recent years, proprietary hops (Citra, Simcoe, and Mosaic) become the most sought-after hops among brewers due to their excellent aroma. However, they are restricted to the owners unless other growers purchase the costly licensing agreements. Many public hops are available to the growers without any additional costs, but their aroma is difficult to match to the proprietary hops. Although proprietary and public hop varieties are unique in their aroma profiles, all hops varieties contain similar volatile compounds, merely differ in the quantity of different individual compounds. The main objective of this thesis was to investigate the feasibility of matching …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Biodegradable Nanocomposite Multifunctional Packaging Film For Fruits, Kalpani Y. Perera, Shubham Sharma, Dileswar Pradhan, Amit Jaiswal, Swarna Jaiswal

Articles

Biopolymers have been used in food packaging in recent years due to high pollution rates and decreased biodegradation of synthetic polymers. Chitosan (CH) and Sodium alginate (SA) are both biodegradable biopolymers with excellent film forming capability. TiO2 nanoparticles have high mechanical strength, degradation ability and antimicrobial properties, which are beneficial in food packaging. The aim of the current work is to develop the biodegradable multifunctional nanocomposite film for fruit (i.e., Pear) packaging applications. Bionanocomposite film was prepared by solvent casting method using CH-SA and various concentrations of TiO2. The multifunctional properties such as UV barrier, thermal, water retention, mechanical, chemical, …

Characterization Of Tea (Camellia Sinensis) Granules For Quality Grading Using Computer Vision System, Md Towfiqur Rahman, Sabiha Ferdous, Mariya Sultana Jenin, Tanjina Rahman Mim, Masud Alam, Muhammad Rashed Al Mamun

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Tea (Camellia sinensis) has been found as an important medicinal beverage for human which is consumed all over the world. Primarily, the majority of tea is being cultivated in Asia and Africa, however it is commercially produced by more than 60 countries. Though substantial amount is produced, its processing system is still underdeveloped which leads to decrease in export opportunity as well as low monetary value. Moreover, the traditional method of tea grading and sorting is laborious, inefficient, and costly which ultimately produces the low-quality heterogeneous products. Processing and grading of tea granules after drying is very important …

Novel Pilot Development Of A Closed-Loop Sustainable System Between Biogas Renewable Energy, Distilling, And Aquaculture By Vermiculture Of Stillage Wastes, Samuel C. Kessler

The Cardinal Edge

This study provides a mixed-methods approach in analyzing a potential closed-loop system between renewable biogas production from anaerobic digestion, vermiculture production, aquaculture production, and organic wastes with a particular focus on stillage wastes. Such system may hold significant promise for significantly reducing organic carbon and methane emissions from its components, and should be assessed for such. The 2021 IPCC report essentially identified methane reduction as the single fastest way to slow global warming (IPCC, 2021), making the study and implementation of methane-reducing systems and supportive policy for them critical. Knowledge gaps to implementing this system were qualitatively identified as disconnect …

Seaweed Polysaccharide In Food Contact Materials (Active Packaging, Intelligent Packaging, Edible Films, And Coatings), Kalpani Y. Perera, Shubham Sharma, Amit K. Jaiswal, Swarna Jaiswal

Articles

Food contact materials (FCMs) are materials that come in contact with food products such as food packaging which play a significant role in the food quality and safety. Plastic, which is a major food packaging material, harms the eco-system, wildlife, and the environment. As a result, numerous researches have been in progress on alternative polymers, which has similar properties as plastic but is also environmentally friendly (biodegradable). In recent years, the utilization of seaweed polysaccharides has piqued interest due to its biodegradability, non-toxicity, antioxidant capabilities, and excellent film formation ability. However, it has a number of drawbacks such as low …

Analysis And Performance Evaluation Of Entropic Thresholding Image Processing Techniques For Electrical Capacitance Tomography Measurement System, Josiah Nombo, Alfred Mwambela, Michael Kisangiri

Tanzania Journal of Science

To improve image quality generated from the electrical capacitance tomography measurement system, the use of entropic thresholding techniques is investigated in this article. Based on the analysis of the principle of Electrical Capacitance Tomography (ECT) image reconstruction and entropic thresholding, various algorithms have been proposed for easy extraction of quantitative information from tomograms generated from the ECT system. Experiments indicate that proposed algorithms can provide high-quality images at no or minimum computational cost. It is easier to implement and integrate with classical algorithms such as Linear Back Projection, Singular value decomposition, Tikhonov regularization, and Landweber. Entropic thresholding techniques present a …

Designing A Computer-Vision Application: A Case Study For Hand-Hygiene Assessment In An Open-Room Environment, Chengzang Zhong, Amy R. Reibman, Hansel A. Mina, Amanda J. Deering

Department of Food Science Faculty Publications

Hand-hygiene is a critical component for safe food handling. In this paper, we apply an iterative engineering process to design a hand-hygiene action detection system to improve food- handling safety. We demonstrate the feasibility of a baseline RGB-only convolutional neural network (CNN) in the restricted case of a single scenario; however, since this baseline system performs poorly across scenarios, we also demonstrate the application of two methods to explore potential reasons for its poor performance. This leads to the development of our hierarchical system that incorporates a variety of modalities (RGB, optical flow, hand masks, and human skeleton joints) for …

Developing A Lab-Scale Fluidized Bed Dryer System To Enhance Rough Rice Drying Process, Kaushik Luthra

Graduate Theses and Dissertations

For more than half of the world's population, rice (Oryza sativa L.) is a staple meal. However, rice growers encounter difficulties supplying this demand, particularly in developing nations, where rice is susceptible to spoilage if the moisture content is not lowered to a safe level soon after harvest. As a result, traditional drying methods, such as sun drying and natural air drying, are commonly used by rice growers, particularly in underdeveloped nations. However, these procedures are time-consuming and can lead to rice spoilage. On the other hand, fluidized bed drying is a well-established technology that might give rice growers a …

Development Of A Portable Low-Moisture Food Pasteurization Device Using Rf Heating, Eric Jason Ohata

Master's Theses

Bacterial presence in low-moisture foods such as flour, cereals, baby formula, and spices, have become a concern due to sanitizing challenges. The food industry currently focuses on wet food sanitation as opposed to low-moisture foods because of bacteria’s inability to reproduce in low water activity media. Traditionally, food processing RF heating pasteurizes in mass quantities while an equivalent consumer device does not exist the market today. A consumer product would help eliminate food waste by providing an easy way to sanitize food and extend shelf life. The Portable Food Pasteurization (PFP) project is an interdisciplinary project involving the Electrical Engineering, …

3d Printing Of High Viscosity Fluids And Its Application In 3d Printing Of Prosthetic Teeth., Abhilash Aditya

Open Access Theses & Dissertations

The advancement in technology has brought forward non-conventional manufacturing methods that are efficient and advantageous for specific applications. 3D printing is one such outcome, whose applications stretch from biomedical applications to daily products. 3D printing is a rapidly growing technology, and innovative research developments have proven versatility in creating physical objects. Simplification and constant improvement in Fused Deposition Modeling (FDM) operation result from decades of research. However, 3D printing is material-specific and contributes to shortcomings in the technology. The build-material dictates the extrusion parameters, including the material discharge rate and head speed for a continuous flow. Customization being the prime …

3d Printing Of Human Microbiome Constituents To Understand Spatial Relationships And Shape Parameters In Bacteriology, Jacques Izard, Teklu Kuru Gerbaba, Shara R. P. Yumul

Department of Food Science and Technology: Faculty Publications

Effective laboratory and classroom demonstration of microbiome size and shape, diversity, and ecological relationships is hampered by a lack of high-resolution, easy-to-use, readily accessible physical or digital models for use in teaching. Three-dimensional (3D) representations are, overall, more effective in communicating visuospatial information, allowing for a better understanding of concepts not directly observable with the unaided eye. Published morphology descriptions and microscopy images were used as the basis for designing 3D digital models, scaled at 20,000×, using computer-aided design software (CAD) and generating printed models of bacteria on mass-market 3D printers. Sixteen models are presented, including rod-shaped, spiral, flask-like, vibroid, …

Development Of Bio-Based Nanocomposites For Biosensor And Indicator Applications In Smart Food Packaging, Abdus Sobhan

Electronic Theses and Dissertations

Smart food packaging based on biosensors has been attracting more and more interest to the industrial community because of the concerns of food quality and safety. A food packaging with biosensor has a scope to enable real-time monitoring of microbial breakdown products of packaged foods. Furthermore, one of the biggest challenges in implementing biosensor for smart packaging materials is the development of bio-sensing active materials that can leverage their electrical, thermal, biodegradable and other functional properties. In this regard, nanocellulose-based activated carbon (NAC) nanocomposite was developed using the activated carbon and nanocellulose gel using the casting method with their different …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

An Impedimetric Aptasensing System For The Rapid Detection Of Salmonella Typhimurium, America Sotero

Graduate Theses and Dissertations

Salmonella Typhimurium is a foodborne pathogen associated with raw and undercooked eggs, poultry, beef, fruits, and vegetables. In the United States, Salmonella is responsible for approximately 1.2 million illnesses, 23,000 hospitalizations, and 450 deaths annually. For many years, conventional detection methods such as culture-dependent and PCR-based methods have been the “golden standards” for the detection of this pathogen due to their high sensitivity and reliability. However, they still have some disadvantages such as long enrichment steps and high costs that need to be overcome. The development of a rapid and reliable method for the detection of S. Typhimurium is needed …

Dynamic Between Biomass, Ph And Acid Lactic By Microorganisms In Fermentation Of Fresh Milk, Emmanuel Rodriguez, Aurelio Castillo, Paul A. Valle, Yolocuauhtli Salazar

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Effects Of Period And Temperature On Quality And Shelf-Life Of Cucumber And Garden-Eggs Packaged Using Cassava Starch-Zinc Nanocomposite Film, Adeshina Fadeyibi, Zinash Delebo Osunde, Mohammed Gana Yisa

Journal of Applied Packaging Research

Nanocomposite film can be used to prolong the shelf-life of fruits and vegetables. This research was undertaken to investigate the effects of packaging period and temperature on the quality and self-lives of cucumber and garden-eggs packaged using cassava starch-zinc nanocomposite film. Hundred grams each of cucumber and garden-eggs were wrapped in a 200× 350 mm size nanocomposite film and low density polyethylene (LDPE) of 2.240± 1.076 × 10^-10 gm^-1Pa^-1s^-1 water vapor and 1.568± 0.084× 10^-10 gm^-1Pa^-1s^-1 oxygen gas permeability. The products were stored at 10−27^oC temperatures …

Maleic Anhydride Compatibilized Peach Waste As Filler In Polypropylene And High Density Polyethylene Biocomposites, Caralyn Wong, Stephanie Jung, Joongmin Shin, Ajay Kathuria

Master's Theses

It is estimated that roughly 103, 515 tons of peach waste is produced annually in the US. The majority of the waste is disposed of in landfills, which contributes to climate change as they release 93 million metric tons of CO₂ equivalent. Peach waste principally consists of remaining stone and seed after flesh removal. The agro-waste includes both cellulose and lignin, which can be utilized as a filler in plastic packaging to reduce carbon footprints and material cost. The objectives of this research are (1) to develop peach flour (PF)-filled biocomposites with a polyolefin matrix using maleic anhydride-g-high density …

Life Cycle Assessment Of The Us Beef Processing Through Integrated Hybrid Approach, Shaobin Li, Yuwei Qin, Jeyamkondan Subbiah, Bruce Dvorak

Department of Civil and Environmental Engineering: Faculty Publications

Hybrid life cycle assessment (LCA) incorporating process-based and economic input-output (EIO)–based inventory data has been applied in various industries (e.g., wind energy, biofuel). Few hybrid LCA studies have been found in the food industry. This work analyzes the life cycle environmental impacts of the US beef processing industry using process-based and integrated hybrid LCA. The process-based inventory includes all resource inputs and waste outputs associated with a beef processing plant. The EIO-based inventory includes key activities missing in the process-based inventory, such as technical and management service, wood and paper, and industrial equipment. Ten environmental impact categories from TRACI v2.1 …

Improving Microbiological Safety Of Low Moisture Food Products Using Radio Frequency And Ethylene Oxide, Long Chen

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Recent foodborne illness outbreaks in US associated with consumption of low-moisture foods (LMF) have heightened concerns of their microbial safety. Salmonella is a pathogen of major concern in LMF due to its ability to persist in low water activity (a_w) environments. The disadvantages of existing decontamination technologies for LMF call for novel and efficient intervention technologies. Radio frequency (RF) and ethylene oxide (EtO) were evaluated in this dissertation for improving microbial food safety and quality of LMF. Cumin seeds and inshell hazelnuts were selected as model foods.

It took < 2 min of stationary RF heating to achieve > 5 log reductions of Salmonella in cumin seeds without …

Elucidating Basis Of Rice Discoloration And Developing Prevention Strategies, Zeinab Mohammadi Shad

Graduate Theses and Dissertations

Economically, discolored rice kernels have less market value, which can seriously impact farm net profit. The reasons for rice discoloration during storage have not been studied extensively and many questions remain. Therefore, the primary goal of this study was to improve understanding of the role and contributions of storage practices on rice quality degradation and discoloration. In this study, three rice cultivars including XL753 (hybrid), Roy J (pureline), and Titan were assessed for changes in quality and microbial kinetics. The rice samples at a high moisture content (MC) of 21% w.b. and a low MC of 16% were stored at …

Comparing Economics Of Traditional Carbonation Method And A Novel Carbonation Invention For Craft Beer, Kira Simonson

Biological and Agricultural Engineering Undergraduate Honors Theses

The traditional method for the carbonation of beer includes bubbling CO₂ through a pressurized brite tank until the desired level of carbonation concentration is reached. The gas either dissolves in the liquid volume or passes through the beer into the gas headspace above the bulk volume of beer. The gas that passes through the liquid can strip the beer of flavors, and this undissolved gas is vented to the atmosphere. To reduce the gas lost to the atmosphere, the CO₂ is dissolved into the beer slowly over a long period of time, which increases gas-use efficiency but sacrifices …

Research Tools And Their Uses For Determining The Thermal Inactivation Kinetics Of Salmonella In Low-Moisture Foods, Soon Kiat Lau

Department of Food Science and Technology: Dissertations, Theses, and Student Research

The reputation of low-moisture foods as safe foods has been crumbling over the past decade due to repeated involvement in foodborne illness outbreaks. Although various pasteurization technologies exist, a majority are thermal processes and have not been well-characterized for pasteurizing low-moisture foods. In addition, the nature of a low-moisture food matrix introduces various experimental complications that are not encountered in high-moisture foods. In this dissertation, the development, building instructions, and characterization of various open source tools for studying the inactivation kinetics of microorganisms in low-moisture foods are described. The first tool is the TDT Sandwich, a dry heating device for …

Integration Of Sodium Hypochlorite Pretreatment With Co-Immobilized Microalgae/Bacteria Treatment Of Meat Processing Wastewater, Xinjuan Hu, Yulie Meneses, Ashraf Aly Hassan

Department of Food Science and Technology: Faculty Publications

Wastewater with 0.2, 0.4, 0.8, 1.0 mg/L free chlorine was biologically treated using co-immobilized microalgae/ bacteria. In contrast, non-pretreated wastewater was treated with beads (control) and blank beads (blank) under the same operating condition. Results showed that NaClO pretreatment removed 8–33% total nitrogen (TN), 31–45% true color and 0.7–2.5 log CFU/mL aerobic-bacteria. At the end of treatment, maximum algal biomass (2,027 dry weight mg/L) was achieved with 0.2 mg/L free chlorine. Bacterial growth in wastewater was decreased by NaClO pretreatment before reaching 7.2–7.7 log CFU/mL on the fifth day. Beads with microorganisms (control) removed 15% more chemical-oxygen-demand (COD), 16% more …