Operations Research, Systems Engineering and Industrial Engineering Commons^™

Studying Pedestrian’S Unmarked Midblock Crossing Behavior On A Multilane Road When Interacting With Autonomous Vehicles Using Virtual Reality, Fengjiao Zou

All Dissertations

This dissertation focuses on the challenge of pedestrian interaction with autonomous vehicles (AVs) at unmarked midblock locations where the right-of-way is unspecified. A virtual reality (VR) simulation was developed to replicate an urban unmarked midblock environment where pedestrians cross a four-lane arterial roadway and interact with AVs. One research goal is to investigate the impact of roadway centerline features (undivided, two-way left-turn lane, and median) and AV operational schemes portrayed through on-vehicle signals (no signal, yellow negotiating indication, and yellow/blue negotiating/no-yield indications) on pedestrian crossing behavior. Results demonstrate that both roadway centerline design features and AV operations and signaling show …

Experimental Investigation Of The Self-Healing Potential Of Bacteria For Sustainable Concrete Structures, Pitiporn Asvapathanagul, Simone Galano, Andrea Calabrese, Mehran Rahmani, Maggie Ly, Daniela Flores, Michael Hernandez, Nicholas Banuelos

Mineta Transportation Institute

Although concrete is the most widely used building material in the world, its limited tensile strength makes cracking a common phenomenon in concrete elements. This study investigates the potential of autonomous self-healing as an eco-friendly and lowcost method to increase the durability of concrete. The crack-healing potential of different types of high-alkaline-tolerant bacteria or calcite-precipitation microorganisms is investigated. High-alkaline-tolerant bacteria and calcite-precipitation microorganisms were used to retrofit lab-fractured concrete samples. The samples healed with each of these bacteria groups were cast and tested under compressive load up to failure to measure the compressive strength of the concrete samples. The outcomes …

The Impact Of A Carbon Tax On Emissions, Jessica Creech

Industrial Engineering Undergraduate Honors Theses

A carbon tax is an economic policy that aims to reduce various emissions to serve the protection of the environment. Versions of this policy have been implemented in multiple countries across the world to introduce a cost for contributing to environmental damage. Since climate change is prevalent in today’s world, finding an effective method to reduce emissions is essential. However, many countries hesitate to utilize a carbon tax for two reasons. First, they are unsure if the carbon tax is effective at reducing emissions. Second, there is a concern that the implementation of such a tax will be detrimental to …

Testing The Effects Of Different Designs On The Physical Properties Of 3d-Printed Watch Bands, Ross Harper

Industrial Engineering Undergraduate Honors Theses

Technological innovation progresses at an ever-increasing rate, and this is especially true in the field of 3D-printing. 3D-printing has become popular in manufacturing settings and among amateur hobbyists alike, largely because 3D-printers can fabricate an enormous number of designs from an array of materials and allow for fine-tuning through several setting options. Individuals with proficient 3D-printing abilities can produce a nearly infinite number of components for diverse applications in manufacturing, recreation, ergonomics, and many more. Some individuals use their skills to create functional substitutes for name-brand items, including bands to fit and be worn with a smart watch. However, little …

Detecting Pathobiomes Using Machine Learning, Valerie Jackson, Valerie Jackson

Industrial Engineering Undergraduate Honors Theses

Machine learning is a field with high growth potential due to the overall continuous progressions, developments, advancements, and improvements caused by the way it is used to help interpret and use large amounts of data [1]. One type of data that can be collected and analyzed by these machine learning models is data that is associated with DNA and information that the DNA gives. The research will be focusing specifically on using machine learning technology to detect pathobiomes indicative of salmonella pork. The pathobiome associated with salmonella is very similar to others, and this causes a problem for classification/detection with …

A Machine Learning Approach For Predicting Clinical Trial Patient Enrollment In Drug Development Portfolio Demand Planning, Ahmed Shoieb

Masters Theses

One of the biggest challenges the clinical research industry currently faces is the accurate forecasting of patient enrollment (namely if and when a clinical trial will achieve full enrollment), as the stochastic behavior of enrollment can significantly contribute to delays in the development of new drugs, increases in duration and costs of clinical trials, and the over- or under- estimation of clinical supply. This study proposes a Machine Learning model using a Fully Convolutional Network (FCN) that is trained on a dataset of 100,000 patient enrollment data points including patient age, patient gender, patient disease, investigational product, study phase, blinded …

Automated Visualization Pipeline For Near Real-Time Risk Management System, Paris Joslin

Industrial Engineering Undergraduate Honors Theses

In modern society, technological capabilities and the amount of data readily available to users continue to grow exponentially. Many have adopted these new capabilities but lack the infrastructure needed to efficiently utilize high-powered software and programs. Without a method to collect, store, and process large datasets in real-time, individuals and businesses can quickly become overwhelmed, inhibiting effective decision-making processes. There is potential to improve decision-making abilities by enhancing the computing infrastructure. To accomplish this task, we will explore the ideas surrounding High Performance Computing (HPC) and data visualization software. High Performance Computing is the ability to process data and perform …

Interaction Effects And Selecting Regression Models Of Taylor Swift Song Popularity, Halle Schneidewind

Industrial Engineering Undergraduate Honors Theses

Understanding music popularity and what drives it is important not only for artists but for other individuals who are financially tied to music sales including producers, writers, and record labels. Studies have been done to define how a song’s popularity can be measured, what attributes or features are drivers for popularity, and to what extent can a song’s popularity even be predicted. This paper takes two linear regression approaches to predicting the popularity of a Taylor Swift song on Spotify based on auditory features the Spotify API estimates and historic popularity of songs on Spotify. One model takes into consideration …

Network Effects Of Emergency Department Clinician Strain And Patient Congestion, Aisha Nelson

All Theses

We develop a discrete-event simulation model to study how staffing strain affects patient outcomes across a network of Emergency Departments (EDs). The aim is to observe how clinician staffing and transfers throughout the system affect the system’s behavior. We will study the network of the seven EDs in the Prisma Health-Upstate system. Patient acuity and resource need are stratified using the five-level Emergency Severity Index (ESI). Patient flow data within and between EDs are collected from EPIC, staffing data from ShiftAdmin, and environmental COVID-19 prevalence data from the Department of Health and Environmental Control. Time periods include the Omicron wave …

The Development And Use Of The Probabilistic Financial Decision Model For A Company Expansion, Elizabeth Wiese

Senior Honors Theses

In the United States, companies are expanding constantly. However, in an industrial equipment dealership expanding into a new state, it is important to understand the industry, new market, and costs associated with expanding. With using financial statements of data-backed percentages for growth, research seeks to set up a financial model to see if expansion for an industrial equipment dealership into the state of North Carolina will be a financially wise decision. Wesley Worldwide, an industrial equipment dealership, is moving forward with the investment of expanding into North Carolina. However, it is vital to understand the financial predictions for profit return …

Mapping Information Flows That Support Adaptive Capacity In The Sterile Processing Department (Spd), Jacob Hionis

All Theses

The Sterile Processing Department (SPD) is the part of the hospital that is responsible for decontaminating, assembling, and sterilizing surgical trays for use in the Operating Rooms (ORs). Errors in the SPD can lead to delayed surgeries or patient harm. The SPD is a complex system, with multiple interconnected subdepartments and roles. Complex systems require coordination between stakeholders. This study aims to discover how an organization can adapt to scale, and how information flows support these adaptations. In this study, observations, semi-structured interviews, and on-the-job interviews were conducted with members across the SPD and OR to elicit pressures, adaptations, and …

Smart Warehousing Implementaion And Education Of Supply Chain Management Leaders, David Quintanilla

Doctoral Dissertations

Paper #1 Overview

Businesses have to adapt to new challenges and technologies in the marketplace which influence warehousing. In order to support this growth, Industry 4.0 technologies have been implemented along the value chain to optimize their organizations and production processes; however, there are still gaps for warehousing research for Industry 4.0. We present four pillars¾location strategy, infrastructure/design, data management, and advanced planning and control¾ as a framework for businesses to use for their adaptation into smart warehousing. In particular, this framework will guide companies in their logistics journey into Industry 4.0. Industry experts and senior logistics professionals were interviewed …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Digital Patient Engagement At A Perioperative Surgical Home Implemented Community Hospital, Srinivasan Sridhar, Amy Mount Hunter, Bernadette Mccrory

Patient Experience Journal

Patients in rural areas typically require more perioperative ‘optimization’ for surgery. The rural healthcare systems often overwhelmed with coordinating perioperative services and deliver less than optimal surgical outcomes. This is due to limited supporting microsystems and ability to effectively engage and track patients over the 120-day perioperative period to limit post-surgical complications. The study assessed longitudinal patient engagement within a newly established Perioperative Surgical Home (PSH) at a rural community hospital serving 10+ surrounding counties to identify barriers and best practices for engagement. A digital patient engagement platform was implemented and used to assess longitudinal patient outcomes and engagement from …

Human Factors Engineering, Robert S. Keyser

KSU Distinguished Course Repository

Human Factors Engineering is a comprehensive survey of human factors theory, research, and applications which are of particular relevance to Quality and Engineering Management. Emphasis will be placed on operator constraints in the design of work processes, workplaces, and instrumentation.

The Effect Of Mental Demand On Body Postures, Rodrick Adams, Valentina Niño

Symposium of Student Scholars

How we perceive our work has a profound relationship with how our body reacts to help facilitate the performance of our tasks. This is an observational study of the experiment in which participants performed tasks under four different conditions (baseline, interruptions, time, and alarm) and used NASA-TLX (NASA- Task Load Index) scores to assess their mental workload for each condition across six dimensions: mental demand, physical demand, temporal demand, effort, performance, and frustration level. We juxtaposed their NASA-TLX score with corresponding REBA (Rapid Entire Body Assessment) scores while standing and RULA (Rapid Upper Limb Assessment) scores while sitting to determine …

Reducing Restaurant Inventory Costs Through Sales Forecasting, Tyler Mason, Chris Schoen, Trevor Gilbert, Jonathan Enriquez

Senior Design Project For Engineers

Family Restaurant is a local restaurant in the greater Atlanta area that serves a variety of dishes that include an assortment of 19 different proteins. Currently, Family Restaurant places protein orders based on business intuition, and tends to over-stock and sometimes under-stock. To minimize inventory costs by reducing over-stocking and preventing under-stocking of proteins, we applied Facebook Prophet (FB Prophet), ARIMA, and XG Boost machine learning models to predict protein demand and then fed these results into a Fixed Time Period inventory model to make an overall order suggestion based on the specified time period. We trained our models on …

Hansen Technologies: Mvp Kaizen Event, Kyle Kraus, Ethan Mahon, Erick Hohler, Alexander Knowles

Senior Design Project For Engineers

Hansen Technologies, based in Commerce GA, is a global leader in the production of industrial refrigeration. One of their most profitable product assembly cells, the Multivalve Platform cell, is not currently producing enough to meet increasing demand. The MVP team focused on analyzing and designing a system using Kaizen to improve the throughput of the MVP cell. After conducting a root cause analysis through Gemba and video analysis, key areas were noted for improvement. Small inconsistencies, such as losing grip on the heavy MVP and searching for materials can take a lot of time away from achieving higher throughput levels. …

Naphtha Characterization (Piona, Density, Distillation Curve And Sulfur Content): An Origin Comparison, Aline Pioli Silva, Juliana Otavia Bahú, Renato Soccol Jr., Leonardo Rodriguez-Urrego, William Stive Fajardo-Moreno, Hiram Moya, Jeffrey Leon-Pulido, Víktor Oswaldo Cárdenas Concha

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Naphtha is an important distillation product of crude oil, and is used as a raw material for first-generation products such as ethylene, propylene, gasoline, xylene (BTX), and others. However, due to the different sources of crude oil, differences in naphtha composition impact the quality of conversion processes. Parameters such as pressure, charge flow, and temperature need to be adjusted for conversion efficiency. This work aims to compare naphtha samples from different origins, through the analysis of distillation curve (ASTM D86), density (ASTM D4052), total sulfur (ASTM D4294), and n-paraffins, iso-paraffins, olefins, naphthene, and aromatics (PIONA, ASTM D5134). Among these parameters …

Urban Public Transportation Planning With Endogenous Passenger Demand, Yifei Sun

Dartmouth College Ph.D Dissertations

An effective and efficient public transportation system is crucial to people's mobility, economic production, and social activities. The Operations Research community has been studying transit system optimization for the past decades. With disruptions from the private sector, especially the parking operators, ride-sharing platforms, and micro-mobility services, new challenges and opportunities have emerged. This thesis contributes to investigating the interaction of the public transportation systems with significant private sector players considering endogenous passenger choice. To be more specific, this thesis aims to optimize public transportation systems considering the interaction with parking operators, competition and collaboration from ride-sharing platforms and micro-mobility platforms. …

Process Automation And Robotics Engineering For Industrial Processing Systems, Drake Stimpson

USF Tampa Graduate Theses and Dissertations

Automation in industrial systems applications has emerged as the fundamental solution for improving quality, production rate, and efficiency of a process. Much of the recent popularity surrounding the transition of processes from manually operated tasks to automated systems can be attributed to the concept of Industry 4.0, which outlines the fundamental guidelines for integrating cyber-physical systems into industrial processes. Due to rapid advancement of technology in robotics and automation as well as the increase in accessibility of resources to this technology, the capability to develop automated systems has become feasible for small-scale enterprise. This work presents a two-part initiative to …

The Impact Of Case Management Intervention For Insured Asthma Patients In Louisiana, An Empirical Study, Mohamed Mohamed Ohaiba

LSU Doctoral Dissertations

Asthma is a chronic condition whose symptoms are managed/prevented using medication and interventions. The overarching objective of this study was to evaluate the impact of patients' demographics on case management enrollment and healthcare utilization, as well as to develop machine learning models to predict high-cost patients.

To accomplish these goals, the Man-Whiteness test, the chi-squares test, logistic regression and odds ratios, and machine learning models were implemented. The average cost of the non-enrolled CM group was significantly higher than the enrolled group (p-value .0001). In addition, the non-enrolled groups had considerably more visits to the emergency department than the other …

An Analysis On Recommended United States Air Force Additive Manufacturing Construction Unit Type Code Package For Expeditionary Deployment, Caleb G. Dann

Theses and Dissertations

Additive Manufacturing Construction (AMC) is an emerging technology in the construction industry which utilizes 3-D printing to reduce costs, labor requirements and deviations in quality. This technology has the ability to rapidly produce repeatable construction projects while tailoring each to specific requirements through the use of 3-D designs. One of the primary objectives of the 2018 National Defense Strategy (NDS) is to continue meeting mission demands with a greater focus on the efficient use of resources. AMC has the ability to satisfy the requirements of this objective. The United States Air Force has begun initial print trials but have not …

Defense Industrial Base Mergers And Acquisitions In The Post-Cold War Era, Corey D. Mack

Theses and Dissertations

The United States Department of Defense (DoD) relies on prime contractors for weapon system development, acquisition, and sustainability, but the increased consolidation of the Defense Industrial Base (DIB) through mergers and acquisitions (M&A) has raised concerns over reduced competition. This research consists of two studies. The first reviews existing literature to identify factors behind the DIB's increased M&A activity since the 1990s, such as DoD budget cuts and market structure. The second study examines the relationship between a prime contractor's financial health and M&A spending, finding a significant relationship between efficiency and M&A spending. Policymakers can use this information to …

Illuminating The Unknown: A Mixed Methods Exploration Of The Dod Software Factory Ecosystem, Zachary O. Ryan

Theses and Dissertations

The Department of Defense’s (DoD) software factories are a collection of modern software acquisition programs that commonly employ the agile, network-based business strategies often found within commercial industries. Having been formally recognized by senior leaders for their revolutionary software development approaches, the software factories highlight a cultural shift within the DoD away from traditional organizational practices. As a result of the factories demonstrated successes, the number of programs employing non-traditional strategies is expanding. While this is notable, it also presents a challenge because a comprehensive understanding of the characteristics, structures, and behaviors of the DoD’s software factories does not currently …

Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov

Chemical Technology, Control and Management

The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.

Introduction To Bioaerosols Assessment And Control, 2nd Edition, Cheri Marcham, John (Jack) Springston

Publications

• Risk Assessment
• Assessment for the Presence of Bioaerosols
• Sampling
• Purpose/ Necessity
• Interpretation Controls
  • Ventilation
  • Other Controls

Study Of The Graphene Energy Absorbing Layer And The Viscosity Of Sodium Alginate In Laser-Induced- Forward-Transfer (Lift) Bioprinting, Shuqi Zhou, Jianzhi Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Laser induced forward transfer (LIFT) bioprinting has been viewed as a new and actively developed three-dimensional bioprinting technology due to its high accuracy and good cell viability. The printing quality is highly dependent on the jet formation and its stability in the LIFT bioprinting process. The objective of this study is to investigate the effect of a graphene Energy Absorbing Layer (EAL) and alginate hydrogel (SA) (w.t. 1% and 2%) viscosity on jet generation in the LIFT bioprinting process. Since SA exhibits a shear-thinning behavior, it is a non-Newtonian fluid. The effect of EAL thickness and SA’s viscosity were addressed …

Queueing System With Potential For Recruiting Secondary Servers, Srinivas Chakravarthy, Alexander N. Dudin, Sergey A. Dudin, Olga S. Dudina

Industrial & Manufacturing Engineering Publications

In this paper, we consider a single server queueing system in which the arrivals occur according to a Markovian arrival process (MAP). The served customers may be recruited (or opted from those customers’ point of view) to act as secondary servers to provide services to the waiting customers. Such customers who are recruited to be servers are referred to as secondary servers. The service times of the main as well as that of the secondary servers are assumed to be exponentially distributed possibly with different parameters. Assuming that at most there can only be one secondary server at any given …

A Framework Of Critical Success Factors For Implementation Of Industry 4.0 In Aerospace And Defense Industries, Lina Khan

Electronic Theses and Dissertations, 2020-

The fourth industrial revolution, or Industry 4.0, is essential to the success of Aerospace and Defense (A&D) organizations as it showcases the ability to adapt, innovate, and remain competitive. Industry 4.0 technologies such as cyber-physical systems (CPS), big data, cognitive computing, smart factories, connected manufacturing, and the Internet of Things (IoT) focus on revolutionizing manufacturing through embedding digital and physical systems, with the goal to maximize the desired output(s) while using minimal resources. Although there are numerous advantages, there are challenges associated with implementation of these complex systems. This doctoral research investigates the critical factors needed for successful implementation of …