Operations Research, Systems Engineering and Industrial Engineering Commons^™

Decision-Maker Trade-Offs In Multiple Response Surface Optimization, Alicia Hawkins

Electronic Theses and Dissertations

The focus of this dissertation is on improving decision-maker trade-offs and the development of a new constrained methodology for multiple response surface optimization. There are three key components of the research: development of the necessary conditions and assumptions associated with constrained multiple response surface optimization methodologies; development of a new constrained multiple response surface methodology; and demonstration of the new method. The necessary conditions for and assumptions associated with constrained multiple response surface optimization methods were identified and found to be less restrictive than requirements previously described in the literature. The conditions and assumptions required for a constrained method to …

Stress, Fatigue And Workload: Determining The Combined Affect On Human Performance, Jessica Mock-Mclaughlin

Electronic Theses and Dissertations

This research generated a model that will help to predict, prevent, control and mitigate the occurrence of task related factors that negatively influence stress, fatigue, and workload; thus enhancing human performance. Past research efforts involving stress, fatigue and workload identified factors that influence a change in performance (Lan, Ji and Looney, 2003, and Hancock & Warm, 1989). Also, while some mathematical models have been developed within each respective area, however, there is no evidence of an integrated model describing the combined affect of stress, fatigue and workload. To respond to this research gap, a quantitative model representing the state of …

Optimization Models For Emergency Relief Shelter Planning For Anticipated Hurricane Events, Abeer Tarief Sharawi

Electronic Theses and Dissertations

Natural disasters, specifically hurricanes, can cause catastrophic loss of life and property. In recent years, the United States has endured significant losses due to a series of devastating hurricanes (e.g., Hurricanes Charley and Ivan in 2004, and Hurricanes Katrina and Wilma in 2005). Several Federal authorities report that there are weaknesses in the emergency and disaster planning and response models that are currently employed in practice, thus creating a need for better decision models in emergency situations. The current models not only lack fast communication with emergency responders and the public, but are also inadequate for advising the pre-positioning of …

Developing A Spatial Interface For Information Visualization And Management In A Crisis Response Scenario, Anthony Costello

Electronic Theses and Dissertations

The focus of this study was to investigate how a spatial interface can be effectively utilized to support information presentation and information integration via human-centric data visualization, leading to decreased cognitive load, more accurate situation awareness, and subsequently, improved task performance. In high tempo, information intensive environments like those managed by an emergency operations center (EOC), information organization tools are essential. Though users can be trained to use conventional email software applications efficiently, the constraints of the information management paradigms inherent to conventional systems may limit a user's ability to gather context and create an accurate picture of the situation. …

Using Surrogate Measures To Predict Patient Satisfaction In The Emergency Department, Erica Egri

Electronic Theses and Dissertations

With healthcare organizations struggling to remain competitive and financially stable in a market where minimizing costs is a priority, hospital administrators feel the sense of urgency when it comes to keeping patients satisfied with services in order to expand volume and market share. The Emergency Department is considered the front door of a healthcare organization, and keeping its visitors satisfied in order to guarantee a future visit or a referral to a friend or family member is a must. While patient input on the services received in a healthcare facility is essential to improving quality of care, the costs associated …

Buffer Techniques For Stochastic Resource Constrained Project Scheduling With Stochastic Task Insertions Problems, Jennifer Grey

Electronic Theses and Dissertations

Project managers are faced with the challenging task of managing an environment filled with uncertainties that may lead to multiple disruptions during project execution. In particular, they are frequently confronted with planning for routine and non-routine unplanned work: known, identified, tasks that may or may not occur depending upon various, often unpredictable, factors. This problem is known as the stochastic task insertion problem, where tasks of deterministic duration occur stochastically. Traditionally, project managers may include an extra margin within deterministic task times or an extra time buffer may be allotted at the end of the project schedule to protect the …

Mass Customization Strategies And Their Relationship To Lean Production In The Homebuilding Industry, Isabelina Nahmens

Electronic Theses and Dissertations

Current housing trends point to an increasing interest from homebuyers to demand houses that reflect their personal and unique styles, and which are individually configured according to these needs (NAHB, 2004). These homebuyers in turn are unwilling to settle for standard models that sacrifice what they really want in a home. At the same time this creates pressure on builders who are reluctant to sacrifice production efficiencies by deviating from standard models. Such customization desired by demanding customers can disrupt the entire estimating, production, delivery and management process, making it even more difficult to manage homebuilding efficiently and effectively. The …

Optimizing The Design Of Multimodal User Interfaces, Leah Reeves

Electronic Theses and Dissertations

Due to a current lack of principle-driven multimodal user interface design guidelines, designers may encounter difficulties when choosing the most appropriate display modality for given users or specific tasks (e.g., verbal versus spatial tasks). The development of multimodal display guidelines from both a user and task domain perspective is thus critical to the achievement of successful human-system interaction. Specifically, there is a need to determine how to design task information presentation (e.g., via which modalities) to capitalize on an individual operator's information processing capabilities and the inherent efficiencies associated with redundant sensory information, thereby alleviating information overload. The present effort …

Cognitive Learning From Computer-Based Information Systems By Incorporating Knowledge Construction Interventions, Wajdi Wazzan

Electronic Theses and Dissertations

The aim of the present study was to develop and empirically evaluate different categories of instructional activities, which stimulate the generation and construction of knowledge on the part of an individual student. These generative activities are primed by prompts or scaffolds, which can easily be inserted into specific curriculum addressing any domain of knowledge. To assess the manner in which the knowledge construction interventions influence the learning outcomes from computerized information systems, we have developed an online computer-based information system that describes the functions and mechanisms associated with the bus system of the US army Abrams M1A2 tank. Seven versions …

Management Systems Fit For Organizational Performance, Rey Diaz

Electronic Theses and Dissertations

The present study identifies the dimensions and variables using prior research within each of the constructs under the management systems, fit and, organizational strategy, structure, lifecycle and performance. The constructs from the research model were defined with a combination of direct, calculated and coded measures. Context analysis for each case categorized management systems design into either prescriptive or descriptive. The selected performance measures have been extensively investigated in the research fields associated with organizational management. The study uses the multiple case study design with cross-sectional data spanning from 1991 to 2005 and involving 19 aerospace companies in the United States. …

Design For Auditory Displays: Identifying Temporal And Spatial Information Conveyance Principles, Ali Ahmad

Electronic Theses and Dissertations

Designing auditory interfaces is a challenge for current human-systems developers. This is largely due to a lack of theoretical guidance for directing how best to use sounds in today's visually-rich graphical user interfaces. This dissertation provided a framework for guiding the design of audio interfaces to enhance human-systems performance. This doctoral research involved reviewing the literature on conveying temporal and spatial information using audio, using this knowledge to build three theoretical models to aid the design of auditory interfaces, and empirically validating select components of the models. The three models included an audio integration model that outlines an end-to-end process …

Exact And Heuristic Algorithms For The Job Shop Scheduling Problem With Earliness And Tardiness Over A Common Due Date, Leonardo Bedoya-Valencia

Engineering Management & Systems Engineering Theses & Dissertations

Scheduling has turned out to be a fundamental activity for both production and service organizations. As competitive markets emerge, Just-In-Time (JIT) production has obtained more importance as a way of rapidly responding to continuously changing market forces. Due to their realistic assumptions, job shop production environments have gained much research effort among scheduling researchers. This research develops exact and heuristic methods and algorithms to solve the job shop scheduling problem when the objective is to minimize both earliness and tardiness costs over a common due date. The objective function of minimizing earliness and tardiness costs captures the essence of the …

Introducing Freshmen To Construction Estimating And Scheduling Using K'Nex Bridge Kits, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

The College of Engineering and Technology at Old Dominion University has developed project-based courses for freshmen engineering students in order to engage them in engineering early with the goal of increasing retention. The courses are divided into three five-week modules that are distributed among the various departments within the college. The Engineering Technology department is responsible for two of the five week modules. One module is comprised of all the engineering technology curriculums; civil, electrical and mechanical, and the other module is strictly a civil engineering technology project.

The civil engineering technology project is focused on the construction industry. Students …

Multi-Phase Flow Analysis In Oil And Gas Engineering Systems And Its Modelling, Orlando F. Ayala, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

[Introduction] Two-phase flow is very common in industrial processes and its applications were already in use in ages as remote as the era of Archimedes. At the present time, many industrial processes rely on multi-phase phenomena for the transport of energy and mass or for material processing. During the last century, the nuclear, chemical and petroleum industries propelled intense research activity in the area. Their efforts have been aimed at the demystification of the mechanisms taking place during this complex flow situation.

Identification And Suitability Of A Non-Anthropomorphic Meta-Language Framework In Military Applications, Gilbert Cardona

Electronic Theses and Dissertations

Humans carry mental models concerning the behaviors, looks, and operation of products, tools, and items used in their daily lives. When these items do not fit a user's conceptual model confusion and inefficiency occur. There are four basic types of mental models based on interactive activities: 1) instructing, 2) conversing, 3) manipulating and navigating, and 4) exploring and browsing. This thesis will focus on the conversing conceptual model and its application to communications between human-agent teams to best fit a user's mental model for that communication. A non-anthropomorphic framework does not exist for use in military applications such as; target …

Performance Of Aerobic Bioreactors During Treatment Of Tanning Industry Wastewater, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The performance of aerobic bioreactors loaded with novel biomass support (the KMT® support particles) during the treatment of tanning industry wastewater is presented in this paper. The wastewater samples were collected from TANWAT Company in Njombe, which extracts tannins from barks of the wattle tree. The wastewater generated from T ANWAT is very acidic with high loading of organic compounds, which are very complex and difficult to biodegrade using conventional methods. The paper introduces a new technology for treatment of heavily loaded industrial wastewater, like tannins, that is the Three-Phase Fluidized Bed Bioreactor (TPFBB) which utilizes the KM'f® support particles. …

Geometric Programming As A General Method For Phase And Reaction Equilibrium Calculations, Godwill Mrema

Tanzania Journal of Engineering and Technology (TJET)

Geometric programming has been used to calculate a large mtmber ofdifferent ideal and non-ideal equilibria, including, for reaction and For non-ideal Systems the primal program is solved a number Of times With the nan-ideal terms fixed each time. After each primal solution, the nan-ideal terms are "'hdated using the corresponding dun! solution. This iteration generally converges. We have included one counter-example, where the failure is caused by the equation Of state, which Cannot giu• correct roots.

An Intervention Framework Based On A Complementary Theory Of Organizational Decline, George S. Mwaluko

Tanzania Journal of Engineering and Technology (TJET)

This paper has developed an intervention framework based a complementary theory Of Organization decline. Any management intervention effort is normally based on a certain theory of organizational decline i.e. a theory that explains the causes for failure of organizations. Four major theories Of Organisational decline were identified in the literature, reviewed and integrated into one, presumably more superior, theory of organisational decline. They included the natural selection theory, the resourc+based theory, the theory Of misperception of feed!mck and the contingency theory. The new theory was then used to guide the design of an intervention framework. The framework utas then used …

Investigation On Distribution Of Cast Properties On Aluminum Plates Poured By Side Gating Technique, Joseph Runyoro

Tanzania Journal of Engineering and Technology (TJET)

Casting technologies wllich improve casting yield and intenzal sOllndness of thin wall cast components are of particular interest to industry especially for critical applications. The main aim of fOll1ldries is to achieve castings free from defects at low cost. It hils been thought that pouring casting by side ingate technique improve directional solidification as the metal stays hot for long time in the feeder cum ingate. Experiments were carried alit IIsing a side gating technique to cast a number of 300 mm x 300 mm LMO and LM 25 plates in furall and pepset sand moulds. The thickness used was …

Sampling Procedure For Pavement Condition Evaluation Of Local Collectors And Access Roads, David Mfinanga

Tanzania Journal of Engineering and Technology (TJET)

Road surface condition evaluation involves the collection Of a lof Of data on different types of distresses. •lie exercise consumes a lot Of resources if the whole road section length is sureeyed and may be prone to errors as a result Of surveyors' fatigue. It is therefore important Io develop n reprevntative sample to be used When road condition manually. This study aimed nt determining sample size for condition evaluation of local collector access roads in urban areas in Tanzania. Two such roads namely l.ufungira and Kilimahewn roads respectively were selected for the study. It is recommended that a section …

Towards Effective Online Learning Implementation In Tanzanian Higher Learning Institutions: Obstacles, Challenges And Opportunities, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper identifies and discusses several influential factors as well as opportunities, associated with effective- online learning implementation in Tanzanian Higher Learning Institutions (THUs). Fourteen (14) THUs were surveyed, using face-to-face interviews in focus groups. The groups included Lecturers, Heads of ICT Departments, ICT Technical Personnel as well as Admi/:listrative Staff. Results indicate that mostly, problems with effective online implementation in THUs are centred on a severe scarcity of online resources and tools and that the main challenges lie in going beyond the process of integrating technology with their teaching curricular, so that training of both teaching and supporting staffs …

A Multidimensional Scaling And Participatory Design Approach To Classify Open Ended Aircraft Maintenance Data, Kunal Kapoor

All Dissertations

The quality assurance data to be analyzed by the web-based surveillance and auditing tool (WebSAT) is both qualitative and quantitative. The forced responses to checklist questions provide a definitive outcome identifying the effectiveness of the four quality assurance work functions. On the other hand, open-ended responses, the second type of response for capturing maintenance errors, are qualitative in nature since they reflect what the auditors and quality assurance representatives observe during their interactions at vendor locations. This research proposes to apply the statistical technique of multidimensional scaling (MDS) and the User centered Design (UCD) method of Participatory Design (PD) to …

Use Of Personas For User Interface Design: Results Of Field And Experimental Studies , Pallavi Dharwada

All Dissertations

Persona is a fictitious user serving as a role model for designers, helping them make difficult decisions from the users' perspective during the interface design process. This concept, which was introduced by Alan Cooper in 1999, has been found to be a powerful tool for engaging the designers with the users. Although personas do not replace the rich data acquired through user testing, they enhance the interface development process by focusing the designers' attention on the target user until the interface qualifies for testing. Recognizing the benefits of persona, many companies, including the Fortune 500 have embraced this concept as …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Correlation Of Numerical Ability And Quality Technician Best Performers In Manufacturing Quality Control Applications, Charles Wesley Shelton

All-Inclusive List of Electronic Theses and Dissertations

The occupation of Quality Technician has many duties requiring numerical operations. Business and industry place considerable emphasis on numerical ability when evaluating the performance of a Quality Technician. In this study, the numerical ability and performance classification of Quality Technicians were analyzed using a correlation analysis. lll A single case study was used to investigate this relationship. A modified Delphi Method was used to determine characteristics of a Quality Technician. Quality Technicians were evaluated by their direct supervisor and completed a standardized numerical ability test. The evaluations by the supervisor were used to classify each technician based on their performance. …

Effect Of Chromium–Gold And Titanium–Titanium Nitride–Platinum–Gold Metallization On Wire/Ribbon Bondability, Jianbiao Pan, Robert M. Pafchek, Frank F. Judd, Jason B. Baxter

Industrial and Manufacturing Engineering

Gold metallization on wafer substrates for wire/ribbon bond applications requires good bond strength to the substrate without weakening the wire/ribbon. This paper compares the ribbon bondability of Cr-Au and Ti-TiN-Pt-Au metallization systems for an optoelectronic application. Both Chromium and Titanium are used to promote adhesion between semiconductor substrates and sputtered gold films. However, both will be oxidized if they diffuse to the gold surface and result in the degradation of the wire/ribbon bondability. Restoring bondability by ceric ammonium nitrate (CAN) etch was investigated. Experiments were conducted to investigate the effect of Cr-Au and Ti-TiN-Pt-Au, annealing, and CAN etch processes, on …

Investigation Of The Lead-Free Solder Joint Shear Performance, James Webster, Jianbiao Pan, Brian J. Toleno

Industrial and Manufacturing Engineering

Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The purpose of this study is to investigate the effects of reflow profile and thermal shock on the shear performance of eutectic SnPb (SnPb) and Sn3.0Ag0.5Cu (SAC305) solder joints. Test boards were assembled with four different sized surface mount chip resistors (1206, 0805, 0603 and 0402). Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb were developed with three levels of peak temperature (12ºC, 22ºC, and 32ºC above solder liquidus temperature, or 230ºC, 240ºC, and 250ºC for SAC …

Analysis Of A K-Out-Of-N System With Spares, Repairs, And A Probabilistic Rule, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Publications

We consider a k-out-of-N reliability system with identical components having exponential lifetimes. There is a single repairman who attends to failed components on a first comefirst-served basis. The repair times are assumed to be of phase type. The system has K spares that can be used according to a probabilistic rule to extend the lifetime of the system. The system is analyzed using Markov chain theory and some interesting results are obtained. A few illustrative numerical examples are discussed.

Efficacy Of Virtual Models In A Production Systems Course, Lawrence Whitman, Barbara Chaparro

Publications

Wichita State University has developed an integrated set of virtual reality models of an aircraft assembly line. These models are intended to provide students an ‘artifact’ of industrial and manufacturing engineering by providing a realistic environment for initial learning and application. By utilizing a virtual model of the line, students are able to view the process and interrogate the process details, make changes and observe the effects, and gain a better understanding of the concepts and their interrelationships. This paper presents the method used to assess if virtual models (computer models of a real factory) lead to: improved perception of …

Estimation Of Liquidus Temperature When Snagcu Bga/Csp Components Are Soldered With Snpb Paste, Jianbiao Pan

Industrial and Manufacturing Engineering

Recently, the soldering of lead-free components with SnPb paste, or lead-free backward compatibility, is becoming a hot topic. One of the major challenges in backward compatibility assembly is the development of a right reflow profile for the soldering of SnAgCu Ball Grid Array (BGA)/Chip Scale Package (CSP) components with SnPb paste. If the SnAgCu reflow profile is used, the reflow temperature may be too high for other SnPb components in the same board during assembly according to the component rating per IPC/JEDEC J-STD-020C. In addition, the flux in SnPb solder paste may not function properly in such a high reflow …