Operations Research, Systems Engineering and Industrial Engineering Commons^™

E-Waste Solutions For Cal Poly And The Central Coast, Andrea Schmidt

Industrial and Manufacturing Engineering

Executive Summary The focus of this paper is to explore the feasibility of an e-waste processing lab on the Cal Poly campus which can operate as an ongoing service to the community while maintaining an academic focus on the issues of end-of-life electronics. The result is a 30’ by 60’ lab on campus that includes 40 work stations, and 3,848 square feet of shelving. The lab can be entirely run by students with 36 hours per week of inspection and pre-production inventory activities and 6 hours of de-manufacturing activities, processing 264 e-waste units per month. Cal Poly students will train …

Resource Assignment In Short Life Technology Intensive (Slti) New Product Development (Npd), Randy A. Reagan

Dissertations

Enterprises managing multiple concurrent New Product Development (NPD) projects face significant challenges assigning staff to projects in order to achieve launch schedules that maximize financial returns. The challenge is increased with the class of Short Life Technology Intensive (SLTI) products characterized by technical complexity, short development cycles and short revenue life cycles. Technical complexity drives the need to assign staffing resources of various technical disciplines and skill levels. SLTI products are rapidly developed and launched into stationary market windows where the revenue life cycle is short and decreasing with any time-to-market delay. The SLTI-NPD project management decision is to assign …

End-Of-Life Analysis Of Nanotechnology Products, Sun Olapiriyakul

Dissertations

Previous research has shown that thermodynamic properties including melting point and specific heat capacity of nanomaterials may be higher than that of their corresponding bulk materials. The melting point elevation and specific heat capacity enhancement of nanomaterials may result in increased energy consumption and waste gases emission at the end-of-life (EOL) stage where the products containing nanomaterials are recycled by high temperature metal recovery (HTMR) process.

In this dissertation, the effect of physical characteristics of nanomaterials, referred to as physicochemical parameters, on their melting temperature and specific heat capacity was investigated. In addition, physical, chemical, and thermodynamic properties of nanomaterials …

A Review Of Programmable Logic Controllers In Control Systems Education, Michael R. Foster, Chad Hammerquist, Robert Melendy

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

A Programmable Logic Controller (PLC) is a standard industrial control device that provides a simple, yet robust, method of controlling manufacturing and dynamic processes. As a result of their low cost, adaptability, and reliability, PLCs are by far the most common control mechanism used by manufacturing businesses of all sizes for environment control, food processing, motion control, and automated test equipment. Yet even though PLCs are heavily used by industry, their use in teaching control theory concepts is uncommon for mechanical engineering programs. Traditional control systems engineering courses focus on the theory and mathematics of continuous-based control systems and rarely …

Decision Analysis Tool For Appropriate Water Treatment Technologies In Improverished Villages, Conner David Johnston

Industrial and Manufacturing Engineering

No abstract provided.

Funeral Services Marketing Interface To Enhance Customer Service And Overall Productivity, Alyssa R. Habing

Industrial and Manufacturing Engineering

Customer satisfaction is the ultimate goal of any business regardless of the industry it resides in; it’s the sole driver of a company’s productivity levels and overall success within the market. Although numb to most market fluctuations, the funeral industry needs to reinvent their business strategies continuously in order to increase their market share. It’s especially important for smaller funeral homes across the world to take this idea to another level in order to stay competitive with the larger, corporate establishments. In the past twenty years, the industry has grown exponentially due to more interest and popularity. The increase in …

Energy Audit And Optimization For "Arches Etc.", James Ross Dixon

Industrial and Manufacturing Engineering

Arches etc. is a San Diego business, which specializes in the manufacture, distribution, and installation of custom designed doors, windows, mouldings, and hardware. Due to the recent economic downturn, which has hindered the construction industry, Arches etc. believed that an analysis and optimization of their energy usage would provide additional assistance towards their goal to lower overhead and maintain current operations.

To begin this task, a comprehensive energy audit was conducted to establish an initial state from which to base improvements. Arches etc.’s current monthly utility bill averages $996, which solidifies the accuracy of this project’s performed energy audit, estimating …

Recycling Made Easy: An Ergonomic Approach To Home Recycling And Trash Containers, Landon P. Boisclair

Industrial and Manufacturing Engineering

The purpose of this project is to create an ergonomically sound recycling/trash container, with the ultimate hope of making the recycling process easier and more intuitive, thereby increasing recycling rates. Currently, while there are many recycling/trash containers available for purchase, there is no product that has a design without glaring ergonomic flaws. An ergonomic design and product prototype was created as a part of this project, and was subsequently tested against a conventional prototype model. The data collected from the experiments conducted suggests that the new ergonomic model makes the waste disposal process and the container transportation process easier, while …

Nonprofit Management Through Effective Database Utilization, Jennifer Muscat

Industrial and Manufacturing Engineering

This project addresses problems found within a specific department within Lifewater International. Lifewater faces many unique challenges operating as a nonprofit. Like most nonprofits, elaborate costly solutions are simply not an option when solving department problems. This project addresses three interrelated problems within Lifewater’s Development and Communications Department. The three issues addressed are Volunteer Management, Donor Management, and Project Management. Each problem was examined to determine the areas for improvement that this project can handle and solve. Each problem was given an improved design. A Volunteer Management System was designed to increase volunteer utilization and appropriately match volunteers with appropriate …

Design And Development Of An Integrated Waste Management System For Huai Nam Khun, Thailand, Annie Duong

Industrial and Manufacturing Engineering

Background

A rural village in Thailand has always been limited in access to waste collection services and processing facilities. As a result, their behaviors of disposing waste in ineffective manners such as dumping and burning causes a variety of environmental impacts. In addition, the people dwelling in these areas are often unaware of the health risks associated to these types of engagements because of the inadequate education system. For a long time coming these circumstances remained untouched until a non-profit organization recently shed light to the need for a solution. An investigation, to develop a design solution in order to …

Environmental Savings Tracking System For Cisco Systems, Inc., Lauren J. Herrera

Industrial and Manufacturing Engineering

This paper illustrates the research, methodology and design used to create an environmental savings tracking system, also known as the Green Dashboard, for Cisco Systems Inc.’s Green Initiatives Group to quantify and capture an annualized summary of savings from projects initiated within its Customer Value Chain Management Organization. It articulately describes the

methodology behind the selection of metrics and the design of the process required to collect and track these quantitative direct savings. As well as describes the benefits associated with implementing this system, such as shifting Cisco towards more sustainable products and increased customer satisfaction and investor relations by …

Small Business And Industrial Engineering Tools, Adib Behjat

Industrial and Manufacturing Engineering

UltraMed, a small distribution company located in the United Arab Emirates, faces high operations cost due to inefficiency in methods and concepts implemented in their business. Through the use of basic Industrial Engineering techniques, UltraMed and other small businesses can succeed in reducing their operational costs through the implementation of three major concepts of Industrial Engineering: Operations Research, Database Management, and Engineering Economic Modeling.

To succeed in implementing the design, it is important to have the right data and a cohesive foundation for the design; else, the results generated by the techniques will be invalid and could cause further complications …

Layout And Procedure Re-Design Of Dcpp Receiving Warehouse, Nicole Elizabeth Riegel

Industrial and Manufacturing Engineering

The receiving warehouse at Diablo Canyon Power Plant, owned by Pacific Gas and Electric, serves as a place to recognize the receiving of items into an ERP system, repackage and label items for long-term storage, and organize items for delivery inside the secured area. The warehouse managers would like to redesign the layout and procedures of the warehouse. Currently items are not received, scanned, or shipped in a timely manner. The flow of people and items in the receiving and shipping area is chaotic and space is limited especially during plant outages. The objective of this project is to: • …

Ernie Ball Guitars Woodshop Facilities Redesign, Cameron Lea Schlemer

Industrial and Manufacturing Engineering

This report details a facilities design for Ernie Ball’s guitar and bass guitar manufacturing facility in San Luis Obispo, CA. Specifically, this project will redesign the layout for the Woodshop, the largest of the 5 manufacturing cells in the facility. This project was completed using the Systematic Layout Planning procedure and focused mostly on phase II and III in which the specifics for a layout are determined, however, space requirements were not evaluated as it was not within scope.

The first step was to develop departments in the facilities; two master departments were identified for the neck manufacturing process and …

Non-Profit Management System For Friends Of The Elephant Seal, Matthew Justus, Robert Macasi, Jeff Zinn

Industrial and Manufacturing Engineering

Friends of the Elephant Seal (FES) are a non-profit organization based in San Simeon, California. Their current method of tracking and reporting information is inefficient. A project was proposed to develop a new information management system for FES, install it at their office and provide training including a user manual. The project was divided into three parts: Database Design and Implementation; User Interface Design and Ergonomics; and User Manual & Help System.

The objective of the project was to design a user-friendly interface specifically for the FES worker that allowed for easy access to data entry functions, reporting functions and …

5-S And The Facility Redesign For A Cleaning Products Manufacturing Company, Jonathan Eipper

Industrial and Manufacturing Engineering

This project deals with a “green” cleaning products company in Southern California. Business has increased 38% in the past year along with changes in production capacity and capability, so the company has identified a need for a sustainable model of manufacturing at their new and expanded facility. Goals of promoting sustainable waste management, minimizing types of lean waste, properly storing inventory, improving workplace communication, and defining production tasks will be addressed in this facilities redesign through 5S. The biggest component and outcome of the facility design will be organization. This leads to a goal of eliminating waste, which will in …

Alleviation Of Spindle Transfer, Blake Ochs, Whitney Bone

Industrial and Manufacturing Engineering

Haas Automation, Inc. is one of the largest CNC machine tool builders in the world. They produce an assortment of machines that come in many different sizes, however, all machines have in common the central tool that allows them to perform their surfacing and bore functions, the spindle. As with the machines themselves, the spindles can also range in size depending on the type of machine they are going into. These spindles are assembled step by step and as components are added to them, several models become so heavy that it is not feasible to have operators lift them by …

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Digester Selection And Operation For Heybeli Island, Spencer Fackler, Joseph Violetti

Industrial and Manufacturing Engineering

The Heybeli Digester project originated with Sema Alptekin in her personal research and was incorporated into a Senior Project opportunity at California Polytechnic State University, San Luis Obispo. The aim of this project was to select and design a plan for the use of a digester for the island of Heybeli, Turkey. The objective of this plan was to incorporate economic, social, and environmental justifications to evaluate if a digester would be a benefit to the community.

Systems Engineering analysis is a vital tool when working with complicated projects that include multiple systems interfacing with one another. Through the use …

Determining A Reliability Factor For Photovoltaic's In San Luis Obispo, Ryan S. Roach

Industrial and Manufacturing Engineering

This project will analyze raw photovoltaic (PV) solar panel performance data in order to determine a reliability factor for solar panels in San Luis Obispo. This project is a subset of a larger project being performed by SLO RESCO, which is funded by a grant from the California Energy Commission. Their project will explore the use of solar, wind, geothermal, and biomass renewable resources. The scope of this project is limited to a small section of RESCO's analysis of solar panel technology and implementation in which a reliability factor will be generated.

The objective is to determine a reliability factor …

Application Of Radio Frequency Identification To An Asset Checkout System, Ma'ayan K. Bennaim

Industrial and Manufacturing Engineering

Radio Frequency Identification (RFID) is a growing technology which is increasingly utilized throughout industry. This senior project identifies an RFID alternative to the checkout system in the tool crib of the Cal Poly Aero Hanger. A new database is designed and built to interface with an RFIDeas AIR enroll reader. The system realizes vast time savings in check in times and increases student accountability for the tools which are checked out by tagging tools.

The Optimal Warehouse Location For Cal Poly's Campus Dining, Robert Buie

Industrial and Manufacturing Engineering

The Cal Poly Corporation and Campus Dining face the challenge of meeting the growth of students and dining venues on campus with the limited space capacity of their warehouse in building 19. Given a $250,000 budget, Campus Dining has an option to keep the warehouse at the current location at building 19 or moving the warehouse to building 82 off Mt. Bishop Road. Each warehouse location has its benefits as building 19 is in the center of campus and building 82 has much more shelving space than building 19. The objective of this project was to select the better choice …

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

Task Analysis, Modeling, And Automatic Identification Of Elemental Tasks In Robot-Assisted Laparoscopic Surgery, Lavie Pinchas Golenberg

Wayne State University Dissertations

Robotic microsurgery provides many advantages for surgical operations, including tremor filtration, an increase in dexterity, and smaller incisions. There is a growing need for a task analyses on robotic laparoscopic operations to understand better the tasks involved in robotic microsurgery cases. A few research groups have conducted task observations to help systems automatically identify surgeon skill based on task execution. Their gesture analyses, however, lacked depth and their class libraries were composed of ambiguous groupings of gestures that did not share contextual similarities.

A Hierarchical Task Analysis was performed on a four-throw suturing task using a robotic microsurgical platform. Three …

Causal Product Knowledge Management, Yun Seon Kim

Wayne State University Dissertations

The US engineering industry base is facing a significant loss of knowledge due to large numbers of employees retiring in the next decade. Problems in various product developments including product design may arise when the expertise is no longer available or the knowledge is forgotten. Also, most of product design knowledge is not reusable, because product design knowledge in an organization remains un-codified. Generally, knowledge-based system can solve or infer these problems. However, knowledge-based systems have been developed solely through the use of rule-based approach, which allows for easy modeling of expert reasoning, but such an approach is not general …

An Interval Based Approach To Model Input Uncertainty In Discrete-Event Simulation, Ola Batarseh

Electronic Theses and Dissertations

The objective of this research is to increase the robustness of discrete-event simulation (DES) when input uncertainties associated models and parameters are present. Input uncertainties in simulation have different sources, including lack of data, conflicting information and beliefs, lack of introspection, measurement errors, and lack of information about dependency. A reliable solution is obtained from a simulation mechanism that accounts for these uncertainty components in simulation. An interval-based simulation (IBS) mechanism based on imprecise probabilities is proposed, where the statistical distribution parameters in simulation are intervals instead of precise real numbers. This approach incorporates variability and uncertainty in systems. In …

Accidents Will Happen. Do Safety Systems Improve Warehouse Safety Performance?, Rene B. M. De Koster, B. M. Balk, I Davelaar, M. Martens

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Safety is becoming more and more an issue in warehouses. In the literature, effective measures leading to increased occupational health and safety have hardly been researched. Most research focuses on the impact of perceived safety-related leadership of managers and worker safety consciousness on ‘safety climate’ and workers’ safe behavior. We have carried out exploratory research into which measures really improve the safety performance of a warehouse. We particularly focus on the effects of (1) safety-related work procedures, (2) safety leadership, and (3) workers’ safety consciousness. Based on a survey we show that safety leadership and safety-related work procedures significantly drive …

Optimizing The Rearrangement Process In A Dedicated Warehouse, Hector J. Carlo, German E. Giraldo

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Determining the optimal storage assignment for products in a dedicated warehouse has been addressed extensively in the Facility Logistics literature. However, the process of implementing a particular storage assignment given the current location of products has not received much attention in the existing literature. Typically, warehouses use downtime or overtime to remove products from their current location and move them to the suggested location. This work presents the Rearrange-While-Working (RWW) policy to optimize the process of rearranging a dedicated warehouse. The RWW policy seeks to relocate products in a warehouse from the initial arrangement to the optimal arrangement while serving …

A New Milp Approach For The Facility Layout Design Problem With Rectangular And L/T Shaped Departments, Yossi Bukchin, Michal Tzur

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In this paper we propose a new approach for the facility layout problem (FLP) and suggest new mixed-integer linear programming (MILP) formulations. The proposed approach considers simultaneously the location of the departments within the facility and the internal arrangement of the machines. Two models are suggested, where the first addresses the rectangular department case and the second allows nonrectangular departments defined by an L/T shape. New regularity constraints are developed to avoid irregular department shapes.

Strategic Design Of A Robust Supply Chain, Marc Goetschalckx, Edward Huang

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The strategic design of a robust supply chain has as goal the configuration of the supply chain structure so that the performance of the supply chain remains of a consistently high quality for all possible future scenarios. We model this goal with an objective function that trades off the central tendency of the supply chain profit with the dispersion of the profit as measured by the standard deviation for any value of the weights assigned to the two components. However, the standard deviation, used as the dispersion penalty for profit maximization, has a square root expression which makes standard maximization …