Operations Research, Systems Engineering and Industrial Engineering Commons^™

Period Batch Control - A Production Planning System Applied To Virtual Manufacturing Cells, Z. Tesic, B. Stevanaov, V. Jovanovic, M. Tomic, C. Kafol

Engineering Technology Faculty Publications

Period Batch Control (PBC) system has been known for its implementation with the classical group technology (GT) cells, and it has been known for its simplicity. The main production planning decisions concern the choice of the period length and the stage number and contents. Also, in order to better integrate the production planning with the application of GT cells at the shop floor, the concept of virtual manufacturing cells has been applied. Since virtual cells configurations are changing periodically, a model for implementing the PBC system into virtual manufacturing cells environment is developed. The model enables alignment of the PBC …

Pilot Programs For Veterans Transition To Engineering Fields, Vukica M. Jovanovic, Anthony W. Dean, Carol L. Considine, Karina Arcaute, Petros Katsioloudis, Mileta Tomovic, Thomas B. Stout, Connor Schwalm, Jennifer G. Michaeli, Yuzhong Shen

Engineering Technology Faculty Publications

Veterans, through their active service, frequently receive training in highly skilled technical areas. However, they may lack a theoretical background in underlying engineering principles. They also need additional support with the transition from a highly structured military environment to an environment with more ambiguous time constraints and different sorts of responsibilities. Moreover they are facing challenges which are specific for their student population. Therefore, enabling multiple mechanisms which would support them and provide them necessary guidance are especially important at universities with large veteran populations such as at Old Dominion University in Norfolk, Virginia. Hence, there is a need for …

Applications Of Digital Manufacturing In Manufacturing Process Support, Vukica Jovanovic, Mihael Debevec, Niko Herakovic, Alok Verma, Mileta Tomovic

Engineering Technology Faculty Publications

In this study, the authors developed three new approaches and models for improvements related to manufacturing processes. The main focus was on planning in a digital environment before the actual manufacturing process is carried out. The first approach is digital manufacturing, which gives affords the opportunity for performing an entire manufacturing process in a virtual environment. In this way, engineers virtually define, plan, create, monitor, and control all production processes. The planning phase can be done simultaneously, while other manufacturing processes are already in place. In this way, processes can continue with no interruption. Various product lifecycle management tools have …

The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles, Ana M. Djuric, Vukica Jovanovic, Mirjana Filipovic, Ljubinko Kevac

Engineering Technology Faculty Publications

A novel methodology for the calculation, visualisation and analysis of the Reconfigurable Machinery Efficient Workspace (RMEW), based on the twist angles, is presented in this paper. The machinery's kinematic parameters are used for calculating the workspace, while the efficient workspace is associated with the machinery's path and includes the end-effector position and orientation. To analyse and visualise many different machinery efficient workspaces at the same time, the calculation is based on the previously developed and validated complex reconfigurable machinery's kinematic structure named n-DOF Global Kinematic Model (n-GKM). An industrial robot is used as an example to demonstrate …

A Framework To Generate A Smart Manufacturing System Configurations Using Agents And Optimization, Khalid Nagadi

Electronic Theses and Dissertations

Manufacturing is a crucial element in the global economy. During the last decade, the national manufacturing sector loses nearly 30% of its workforce and investments. Consequently, the quality of the domestic goods, global share, and manufacturing capabilities has been declined. Therefore, innovative ways to optimize the usage of the Smart Manufacturing Systems (SMS) are required to form a new manufacturing era. This research is presenting a framework to optimize the design of SMS. This includes the determination of the suitable machines that can perform the job efficiently, the quantity of those machines, and the potential messaging system required for sharing …

A Hybrid Simulation Framework Of Consumer-To-Consumer Ecommerce Space, Oloruntomi Joledo

Electronic Theses and Dissertations

In the past decade, ecommerce transformed the business models of many organizations. Information Technology leveled the playing field for new participants, who were capable of causing disruptive changes in every industry. "Web 2.0" or "Social Web" further redefined ways users enlist for services. It is now easy to be influenced to make choices of services based on recommendations of friends and popularity amongst peers. This research proposes a simulation framework to investigate how actions of stakeholders at this level of complexity affect system performance as well as the dynamics that exist between different models using concepts from the fields of …

Toward An Engineering Discipline Of Warehouse Design, Leon Mcginnis, Timothy Sprock

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

Warehouses today are complex dynamic engineered systems, incorporating automation, mechanization, equipment, fixtures, computers, networks, products and people, and they can support the flow of tens or hundreds of thousands of different items to enable fulfilling thousands or tens of thousands of orders daily. In that sense, they represent a design challenge that is not terribly different from the design of other complex dynamic engineered systems, such as a modern passenger airplane, an automobile, or a unique building. What is different is that the design of these other complex dynamic engineered systems typically follows some engineering design discipline. Here, we argue …

Monte Carlo Algorithm To Study Performance Parameters Of Shuttle Systems, Wolfgang Trummer, Dirk Jodin

14th IMHRC Proceedings (Karlsruhe, Germany – 2016)

Shuttle systems provide alternative solutions in storage technology. Ma-terial flow analyses of these systems are extensive due to complex interac-tion of several shuttles and lift elements. Besides classic cycle time calcu-lation, it also requires advanced analyzing methods. At the Institute of Logistics Engineering (ITL), Graz University of Technology, an innovative, software-based approach has been developed to investigate the performance of shuttle systems. This approach is based on the Monte Carlo method. The software tool takes into account a variety of different systems and operating parameters to reflect operative behavior of shuttle systems.

Improving Machine Changeover/Setup Times By Increasing U.S. Manufacturers' Knowledge Of 5s, Nicole Schra-Martin

Walden Dissertations and Doctoral Studies

The 5S process is one of the techniques born out of Japanese manufacturing. Ohno, the developer of 5S, found that when manufacturing waste is eliminated, costs are reduced and profits increase. This is the bases of 5S and this research. The cost of U.S. manufactured products is higher compared to the cost of products from other global manufacturers that use 5S. This study was conducted to determine if implementing 5S in U.S. manufacturing could change U.S. manufacturing cost and if using 5S could impact U.S. manufacturing. The research questions focused on the relationship between 5S and changeover/setup times on production …

Ergonomic Analysis Of Mobile Cart–Assisted Stocking Activities Using Electromyography, Sohyung Cho

SIUE Faculty Research, Scholarship, and Creative Activity

Workers in grocery stores are exposed to numerous musculoskeletal risks that can be reduced using assistive devices while performing stocking tasks. A regional grocery store has recently deployed a mobile cart without comprehension of its ergonomic impact on workers, which this article investigates using normalized electromyography data (%MVC). This article studies not only ergonomic impact based on %MVC values but also work performance represented by a muscle force metric (MFM). The results from this study showed highest muscle groups in %MVC and MFM were the erector spinae and triceps. Interestingly, muscle activations on erector spinae were reduced when mobile cart …

On Valuing Biopharmaceutical Product Pipelines: An Effectuation Model And Evidence, Mark J. Ahn, Anne S. York, Wei Wu, Yulianto Suharto, Tugrul Unsal Daim

Engineering and Technology Management Faculty Publications and Presentations

New creative approaches are needed to manage emerging biotechnology innovations, regulations, and payor environments to enhance product pipeline productivity, valuation, and risk management. Biopharmaceutical firms must make dynamic resource allocation decisions on their relative levels of internal R&D and external strategic alliances in furthering their pipelines. As the predominant method of using discounted cash flow (DCF) methodologies may lead to chronic underinvestment and performance, we evaluated the integration of traditional DCF with an effectuation model of analysis. Unlike traditional financial models that begin with the end goal of assumed known cash flows and recursively solve for portfolio optimization, the effectuation …

Swerve, Kaitlin A. Castillo, Cichasky A. Catherine

Industrial and Manufacturing Engineering

Carpooling yields great benefits environmentally, socially, and economically for carpooling, however there is no easy to use, safe, and enjoyable application for people to connect with others who are both close in proximity and have schedules that match currently. By creating a database and visual mock ups, our senior project creates the basis for an application called Swerve that matches users by location and schedules and has social and economic incentives. Our research allowed us to further understand the social, environmental and economic benefits and incentives of carpooling. We also looked into current carpooling websites and applications and could not …

Startup Social Responsibility: A Concentrated Social Audit Of Halt Medical Inc., Matthew Frank Rosa

Industrial and Manufacturing Engineering

Halt Medical Inc. is a biomedical device startup whose managers are interested in assessing their levels of employee satisfaction and organizational well-being. They want to know if their employees are cooperating, if departments are cohesive, and if everyone is happy. To evaluate Halt Medical’s social capital and environment, a social responsibility audit will be conducted concentrated specifically on the organization’s social and ethical initiatives to its employees. This analysis requires interviews of managers, observations of cultural diffusion, and employee opinions on a variety of business areas. The five areas of focus for this audit are the company’s accommodation of each …

Multi-Restaurant Delivery Service Design And Financial Analysis, Dylan Davis Fuller

Industrial and Manufacturing Engineering

When found on campus all day and in need of a quick meal before the next class what are the options for you as a Cal Poly student or faculty? Campus dining is the only option that can meet the typical demand you have of speed and convenience. Restaurants with food delivery often don’t have the variety or take to long for delivery. The goal is to provide a delivery service with the speed of getting a meal on campus but with the variety and quality of the restaurants found in downtown San Luis Obispo. Looking at existing businesses providing …

Modeling Information Reliability And Maintenance: A Systematic Literature Review, Daysi A. Guerra Garcia

Industrial Engineering Undergraduate Honors Theses

Operating a business efficiently depends on effective everyday decision-making. In turn, those decisions are influenced by the quality of data used in the decision-making process, and maintaining good data quality becomes more challenging as a business expands. Protecting the quality of the data and the information it generates is a challenge faced by many companies across all industrial sectors. As companies begin to use data from these large data bases they will need to begin to develop strategies for maintaining and assessing the reliability of the information they generate using this data. A considerable amount of literature exists on data …

College Football Rankings: Maximum Flow Model, Jaymin Patel

Industrial Engineering Undergraduate Honors Theses

College football is a very popular sport in the United States. There is much debate over the college football rankings every week. A maximum flow network is implemented into the CMS+ rankings to observe the effects it has on the college football rankings.

The Prediction Predicament, William "Ike" Eisenhauer

Engineering and Technology Management Faculty Publications and Presentations

The article focuses on the prediction of predicament in terms of forecasting at industrial engineering level. Topics discussed include business optimize resources via forecasting; audience who cannot comprehend the methodology used for forecasting in healthcare operations; and use of forecasting for performance measurement.

Spare Parts On Demand Using Additive Manufacturing : A Simulation Model For Cost Evaluation., Stefan Jedeck

Electronic Theses and Dissertations

Little is known about the impact of additive manufacturing in the spare part supply chain. A few studies are available, but they focus on specific parts and their applications only. A general model, which can be adapted to different applications, is nonexistent. This dissertation proposes a decision making framework that enables an interested practitioner/manager to decide whether using additive manufacturing to make spare parts on demand is economical when compared to conventional warehousing strategy. The framework consists of two major components: a general discrete event simulation model and a process of designing a wide range of simulation scenarios. The goal …

Modeling And Analysis Of Pca Workflow, Ewing Tiong

Masters Theses

Nursing shortage has been reported as a major problem faced not only by the United States but also by many other countries. One of the many interventions that has been used to curb nursing shortage is the increase in employment of Unlicensed Assistive Personnels (UAPs) as an alternative care delivery model. There are many types of UAP and one of them are Patient Care Assistants (PCAs). This research proposes a methodology to model and analyze the work ow of a PCA in terms of completing assigned tasks in a timely manner. The specific objectives of this research are to model …

Design Of A Web Application To Improve The Efficiency Of Crnas., Venkatramanan Chanchapalli Madhavan

All Theses

Physical artifacts such as whiteboards have been successfully used in healthcare facilities to keep track of dynamic changes in information and to manage work schedules. Since these whiteboards are easy- to- use and do not require any technical expertise, they have been easy- to-adopt. Additionally, they act as memory aids for the users by capturing transient information. However, they have their own limitations, the primary ones being the lack of mobility and real-time updates, both of which are crucial in a high consequence environment such as a healthcare facility. These whiteboards are usually kept in a central location with the …

Nursing Interruption Dynamics: The Impact Of Work System Factors, Yushi Yang

All Dissertations

Interruptions occur frequently in healthcare work systems. Hands-free Communication Devices (HCDs) were implemented in healthcare work systems to support the interruption process. However, from a sociotechnical systems perspective, HCDs may introduce new complications and unintended consequences to the work system. Research gaps exist in investigating the complexity of HCD interruptions in the real-world context. This dissertation aims to understand HCD interruption dynamics in the nursing work systems, using qualitative research methods. The first study examined the major differences between face-to-face and HCD-mediated interruptions, based on 30 hours of field observations in the acute care setting. Three major differences included: (1) …

Ergonomics Analysis Of Touchscreen Utilization As A Function Of Preferred Hand And Gender, Jordan E. Odell

Master's Theses

The growth of touchscreen technology has changed the way users interface with a wide range of computing and communication products and systems. Examples range from personal tablets and laptops to industrial applications such as process control, point-of-sales, and ticketing kiosk systems. An important area of application is the automobile industry which is designing cars with touchscreen control panels to replace the previously designed mechanical knobs and buttons. However, interacting with touchscreens does not provide the same tactile feedback as physical mechanisms, therefore they require more precise movement and visual attention, which distracts the user from the primary task.

The purpose …

Estimating Likelihood Of Having A Brca Gene Mutation Based On Family History Of Cancers And Recommending Optimized Cancer Preventive Actions, Mehrnaz Abdollahian

USF Tampa Graduate Theses and Dissertations

BRCA1 and BRCA2 are gene mutations that drastically increase chances of developing breast and ovarian cancers, up to 20-fold, for women. A genetic blood test is used to detect BRCA mutations. Though these mutations occur in one of every 400 in the general population (excluding Ashkenazi Jewish ethnicity), they are present in most cases of hereditary breast and ovarian cancer patients. Hence, it is common practice for the physicians to require genetic testing for those that fit the rules as recommended by the National Cancer Comprehensive Network. However, data from the Myriad Laboratory, the only provider of the test until …

Reliable Power System Planning And Operations Through Robust Optimization, Wei Yuan

USF Tampa Graduate Theses and Dissertations

In this dissertation, we introduce and study robust optimization models and decomposition algorithms in order to deal with the uncertainties such as terrorist attacks, natural disasters, and uncertain demand that are becoming more and more signicant in power systems operation and planning. An optimal power grid hardening problem is presented as a defender-attacker-defender (DAD) sequential game and solved by an exact decomposition algorithm. Network topology control, which is an eective corrective measure in power systems, is then incorporated into the defender-attacker-defender model as a recourse operation for the power system operator after a terrorist attack. Computational results validate the cost-eectiveness …

Spatiotemporal Sensing And Informatics For Complex Systems Monitoring, Fault Identification And Root Cause Diagnostics, Gang Liu

USF Tampa Graduate Theses and Dissertations

In order to cope with system complexity and dynamic environments, modern industries are investing in a variety of sensor networks and data acquisition systems to increase information visibility. Multi-sensor systems bring the proliferation of high-dimensional functional Big Data that capture rich information on the evolving dynamics of natural and engineered processes. With spatially and temporally dense data readily available, there is an urgent need to develop advanced methodologies and associated tools that will enable and assist (i) the handling of the big data communicated by the contemporary complex systems, (ii) the extraction and identification of pertinent knowledge about the environmental …

Analysis Of A Clinically Failed, Mechanically Intact, Reconstructive Compression Plate, Bharadwaj Cheruvu, Sunil Karmacharya, Richard T. Laughlin, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

A reconstructive orthopedic bone plate was submitted for analysis. Traditional failure analysis methods were used to assess the mode of the plate failure. Metallographic investigation of the plate was carried out in this report. Since limited data was available in the literature and clinical data related to subject demography, date of removal as well as reasons for removal unknown, in depth analysis was not possible. However, the plate was received in in-tact condition with minor biological deposits and scratches, it is speculated that the failure of the plate may have been due to biological/clinical reasons, likely infection, rejecting the device …

Creation And Analysis Of Checklists To Improve Raquet Stringing Performance In Tennis Warehouse, Alston S. Nguyen

Industrial and Manufacturing Engineering

Tennis Warehouse has a need to increase the supply of strung racquets and man hours to complete these strung racquets over the course of a year. That is, the demand can be increased by up to 4 times its average load during certain hectic parts of the year (professional tournaments, holidays, and competitive seasons). Not meeting this demand can lead to upset customers, unnecessary waste and replacing of rushed items and shipping costs, and a discouraged customer service representative workforce. The objective of this project is to use a set of checklists to address this problem and attempt to increase …

Haptics-Based Cataract Surgery Simulator, Jia Luo

Link Foundation Modeling, Simulation and Training Fellowship Reports

Surgical training using computer-based simulators are being adopted by many medical specialties, mainly because they offer several advantages to traditional training methods involving animals or cadavers. This article focuses on the design and implementation of a haptics-based cataract surgery simulator.

Detecting Periods Of Flight With High Task Load, James R. Parkinson, Steven J. Landry, Quang Dao, Caitlin Surakitbanharn

The Summer Undergraduate Research Fellowship (SURF) Symposium

Tools that predict dangerous working conditions empirically in the cockpit could greatly improve aviation safety. In an effort to lay the groundwork for such tools, this study will investigate whether a link exists between task load and pilots’ control strategies, their biometric data, and their planes’ position data. Using X Plane simulation software, an experiment will be run in which licensed pilots will fly a 3-nautical-mile approach into Mineta San Jose International Airport 4 times, under different task load conditions. During the flight, participants’ pupil diameters will be recorded along with the simulated aircraft position data and cognitive control modes. …

Identifying Mode Confusion In Recorded Aircraft Data, James Douglas Thomas, Yul Kwon, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

In recent decades, commercial aviation accidents have occurred due to human-machine interaction (HMI) problems known as “mode confusion.” This is caused, in some cases, by a lack of understanding of onboard systems by pilots. Large amounts of Flight Operational Quality Assurance (FOQA) data are available, analysis of which could assist in identification of safety risks in daily operations. Through analysis of pilot reactions and recorded aircraft data, methods to detect mode confusion are developed to improve aviation safety. This study was conducted by inducing mode confusion into a flight simulation scenario and analyzing aircraft data to detect emerging patterns. Three …