Other Mechanical Engineering Commons^™

Adapted Pool Cue, Cole Clark, Daniel Patterson, Michelle Cheung, Dylan Sauer

Mechanical Engineering

Our primary goal was to develop an adaptive device to allow a user with limited upper body mobility to more effectively play a game of pool. Within this goal it was important to design around the concept of a least restrictive environment, in order to provide the user with as close to a standard pool playing experience as possible. The device was designed to specifically meet the needs of John Lee, an Assistive Technology Specialist at Cal Poly's Disability Resource Center. Mr. Lee has muscular dystrophy, which limits his upper and lower body mobility and currently requires his use of …

Science Of Water Table, Tim Haigh, Kris Francis, Nick Schlemmer

Mechanical Engineering

No abstract provided.

St. Jude Medical - R&D Robot For Sensor Testing, Andrew Chanul Kim, Stanley Logan Laszczyk, Edgar Nava, Nathan Gall

Electrical Engineering

No abstract provided.

Low-Cost Strider For Guatemala, Nicole Catherine Cooper, Gonzalo Hernandez, Jared W. Tower

Mechanical Engineering

The purpose of this project was to create a strider, a type of standing rehabilitation device, for children in developing countries who have trouble walking and supporting their full body weight. The project was initially brought to us by Cal Poly professor Brian Self, who had visited a clinic in San Marcos and determined that there were children there who had difficulties with walking and were a need for a rehabilitation device. The team discussed the problem with Dr. Self, Matt Robinson (a local San Luis Obispo prosthetist), and Cal Poly physics professor Pete Schwartz, all of whom had visited …

Mobile Solar Pv Trainer, Matthew Myers, Matthew Clause, Lawrence Smith

Mechanical Engineering

The aim of the Mobile Solar PV Trainer Project was to design, construct and test a versatile and robust laboratory training rig for the Cal Poly Electrical Engineering department. This project was inspired by the desire of one or more California Polytechnic State University electrical engineering professors to add laboratory components to two established upper division electrical engineering courses in photovoltaic panels and solar power. This report contains a detailed description of the trainer’s desired specifications, our ideation process, a thorough description of the selected trainer design including part drawings, assembly documentation and a bill of materials as well as …

Adaptive Adjustable Tricycle, Jasper E. Bolton, Kemely A. Chow, Ryan D. Hirahara, Heather K. Instasi

Mechanical Engineering

As a part of the Cal Poly Mechanical Engineering curriculum, all students must take part in a three quarter long senior design project. Students are presented with existing problems, select a project, and then apply the knowledge they have gained throughout their academic career to design and build a solution. The intent behind this project is to create an experience that is similar to an engineering project in industry, by applying engineering and teamwork skills to solve a problem.

Team Trikeceratops’ mission was to develop an adaptive adjustable tricycle to be used in the Special Education Department of the Buena …

Modification Of A Draw Bar Type Arena Harrow To Three Point Mounted Type Harrow, Clayton Alan Brown

BioResource and Agricultural Engineering

This senior project will be the design, and construction of a three point hitch to be attached to a draw bar type spike tooth harrow. Currently used by the Cal Poly Rodeo Team to cultivate their arena before performances, and practices.

The attachment will allow the harrow to be pulled in both directions to create different types of soil affects.

Also the fabrications has a minimal budget so the majority of the materials will be scrap material already in position of the rodeo team or donated to the project.

Friction Test Machine, Kyle Raymon Schless, Lynda Beatriz Tesillo, Mustapha Nadri

Mechanical Engineering

No abstract provided.

Lightweight Uav Launcher, Ben Miller, Christian Valoria, Corinne Warnock, Jake Coutlee

Mechanical Engineering

This report discusses the design, construction, and testing of a lightweight, portable UAV launcher. There is a current need for a small team of soldiers to launch a US Marine Tier II UAV in a remote location without transport. Research was conducted into existing UAV launcher designs and the pros and cons of each were recorded. This research served as a basis for concept generation during the initial design development stage. It was required that the design weigh less than 110 lbs, occupy a smaller volume than 48" x 24" 18" in its collapsed state, be portable by a single …

Final Design Report Bull Outdoor Products Tailgating/Backyard Barbecue, Kyle Van Allen, David Mei, Nicholas James Marquez

Mechanical Engineering

Bull Outdoor Products, Inc. is a specialty company whose main products are high end barbecues for use in outdoor kitchens. They desire a more portable barbecue stand(s) that can be used for tailgating. This is to be achieved by creating a dual-purpose stand/frame that allows for the barbecue head to be used on a trailer hitch or as rolling stand that can be used without a trailer hitch.

Bellevue-Santa Fe Charter School Solar Panel Project, Dulce Arroyo Martinez, Henrik Lee, Moises Quiroz, Timothy Iafrate

Mechanical Engineering

This project covers the design, manufacture, and installation of solar panel frames on a charter school in Avila Beach, CA. Through preliminary research regarding important factors (such as solar movement, ideal panel angle, and site-specific factors), a frame that meets the standards set forth in the California Building Codes was designed. After approval by presiding authorities, parts specified in the design were ordered, inspected upon arrival, and manufactured to the design as necessary. Much of the challenge was related to the installation aspect of the project—coordination with the proper authorities and correct submission of applications was integral to the success …

Team Poly Cup, John Adkins, Scott W. Hart, Elise Kiland

Mechanical Engineering

This project involves the use of mechanical engineering expertise to develop, design, and create a functioning prototype of a collapsible coffee cup. The prototype is to be designed to the specifications given by Jason Blum, the project sponsor. Allowances may be given for design freedom as specified by Jason Blum. The goal of this project is to create a product which may replace the both the disposable coffee cups distributed at coffee shops as well as to create a product which may replace the traditional travel mug due to its increased portability.

Team Poly Cup has worked throughout the year …

Model Block Press, Jordan Brown, Michael Evans, Connor Morrow

Mechanical Engineering

The Center for Vocational Building Technology came to the Mechanical Engineering department at Cal Poly, San Luis Obispo with a project to create a new, less expensive model block press than their current BP9 design. This press would produce ¼ scale model compressed earth blocks to be sold as souvenirs and used in demonstrations for constructing buildings. After analyzing the design of the current block presses, JCM came up with the BP10 design. The BP10 operates similarly to the larger block presses, but will cost significantly less to produce and will have some of the design features enhanced to make …

The Collapsible Trailer: Design And Manufacture, Robert Hobson

Biomedical Engineering

No abstract provided.

In-Bottle Wine Aerator, Kevin Kesler, Patrick Lowry, Paul Woolworth

Mechanical Engineering

The proposal for Capitol Cultivators discusses and evaluates the development of an in-bottle wine aerator. It defines the problem and need for an aerator located inside the wine bottle. Additionally, it outlines requirements essential for an effective design and describes the engineering process that will be followed.

Trampoline And Bungee Fatigue-Test Machine, Andy Brock, Christopher D'Elia, Ryan Murphy

Mechanical Engineering

JumpSport, a Saratoga based recreational and fitness trampoline company, sponsored this senior project team towards the development of a fatigue-testing machine. The goal of this project was to iterate the previous machine JumpSport used for bungee cord, spring, and trampoline fatigue testing. Since minimal study had been conducted on these specific bungee cords, the fixture was designed to confirm the theoretical correlations for rubber and perform the final tests according to a strict protocol. Operating with a specific test protocol in mind will allow the data from multiple tests to be combined and analyzed statistically. With a design concept in …

Sodhana Environmental - Final Design Report, Eric Taylor, Corissa Bellis, Cody Perez, Cameron Zeller

Mechanical Engineering

A fully designed cost-effective, sustainable, toilet for the developing world.

Heat Transfer Experiment: Energy Conservation, Ben Ward, Brett Wallace, Ryan Waltman

Mechanical Engineering

This proposal, prepared for the Mechanical Engineering Department by the HTEC design team will redesign and replace the current energy conversion lab that is inaccurate and out of date. The team will evaluate methods of energy conversion, specifically using braking systems, as well as existing labs in order to design an accurate and relatable experiment for this lab. The project team will work with Professor Kim Shollenberger in order to design an experiment that demonstrates energy conversion through the first law of thermodynamics while utilizing a common device that is practical in student’s lives. The final result of this project …

Mode I Fracture Toughness Of Eight-Harness-Satin Carbon Cloth Weaves For Co-Cured And Post-Bonded Laminates, Josh E. Smith

Master's Theses

Mode I interlaminar fracture of 3k 8-Harness-Satin Carbon cloth, with identical fill and weft yarns, pre-impregnated with Newport 307 resin was investigated through the DCB test (ASTM D5528). Crack propagations along both the fill and weft yarns were considered for both post-bonded (co-bonded) and co-cured laminates. A patent-pending delamination insertion method was compared to the standard Teflon film option to assess its applicability to mode I fracture testing. The Modified Beam Theory, Compliance Calibration method, and Modified Compliance Calibration method were used for comparative purposes for these investigations and to evaluate the validity of the proposed Equivalent Stiffness (EQS) method. …

Constant Voltage Hot-Wire Anemometry For The Boundary Layer Data System, Hon Yee Li

Master's Theses

To continue the development of the Boundary Layer Data System (BLDS), a constant voltage hot-wire anemometer (CVA) is implemented into the BLDS for flight-testing. The hot-wire anemometer was chosen as an alternative to the traditional pressure probe because of the ability to measure both average velocity and fluctuating velocity within the boundary layer. Previous work done on the benchtop has led to the design of miniaturization, flight-capable hardware for the BLDS. The next step in the development of the BLDS – CVA calls for quantifying the accuracy of the boundary layer measurements measured by the CVA system. To do this, …

Cae Methods On Vibration-Based Health Monitoring Of Power Transmission Systems, Brian Fang

Master's Theses

This thesis focuses on different methods to analyze power transmission systems with computer software to aid in detection of faulty or damaged systems. It is split into three sections. The first section involves utilizing finite element software to analyze gear stiffness and stresses. A quasi-static and dynamic analysis are done on two sets of fixed axis spur gears and a planetary gear system using ABAQUS to analyze the stress, strain and gear mesh stiffness variation. In the second section, the vibrational patterns produced by a simple bevel gear system are investigated by an experiment and by dynamic modeling in ADAMS. …

Microphone-Based Pressure Diagnostics For Boundary Layer Transition, Spencer Everett Lillywhite

Master's Theses

An experimental investigation of the use low-cost microphones for unsteady total pressure measurement to detect transition from laminar to turbulent boundary layer flow has been conducted. Two small electret condenser microphones, the Knowles FG-23629 and the FG-23742, were used to measure the pressure fluctuations and considered for possible integration with an autonomous boundary layer measurement system. Procedures to determine the microphones’ maximum sound pressure levels and frequency response using an acoustic source provided by a speaker and a reference microphone. These studies showed that both microphones possess a very flat frequency response and that the max SPL of the FG-23629 …

Cisco Rackmount Bracket Optimization, Michael Baldwin, Edwin Lee, Garrett Smith

Mechanical Engineering

No abstract provided.

Rapid Decompression Containment System, Evan Domingue, Michelle Rudney, Daniel Trees

Mechanical Engineering

Cal Poly students; Evan Domingue, Michelle Rudney and Daniel Trees; are working with General Atomics Aeronautical Systems, Inc. (GA, ASI) and engineer John Wilcox to complete a senior project. The senior project is focused on finding a solution to meet the requirement set forth in MIL-HDBK 1791 4.2.5.2 for rapid decompression which requires cargo items to be designed with pressure relief devices or to be configured for air shipment as to prevent any part from becoming a projectile in the event of catastrophic loss of aircraft cabin pressure. The goal of this project is to design a safe, cost-effective, and …

Titan 130 Engine Aft-Mount, Woody Newell, Michael Haworth, Dylan Perry

Mechanical Engineering

No abstract provided.

Barbeque Grill Temperature Distribution Design Improvement, Peter Gobell, Connor Mcgill, Thomas Willson

Mechanical Engineering

Team License to Grill set out to asses Bull Outdoor Products, Inc.’s barbeques and quantify the apparent uneven temperature distribution or “hot spots” and “cold spots” across the grill. This testing was accomplished with the design and fabrication of a test fixture allowing for accurate and repeatable temperature collection across the barbeque. With results that matched the sponsor’s claims of hot and cold spots, an engineering model was made using heat transfer and thermodynamic equations. Once the model somewhat resembled the experimental data, it was used to suggest different modifications that would allow for better temperature distribution. It was discovered …

On-Demand Labeling, Nathan Cheadle, Lorne Stoops, Tony Wang, Robert Zimmerman

Mechanical Engineering

No abstract provided.

Mobybike Human Powered Hydrofoil, Steven Bieri, Tim Buckmaster, Kristen Heckman

Mechanical Engineering

The purpose of this project is to develop a human powered hydrofoil bicycle that uses the patented foil motion of the sponsor, Liquid Ideas, to generate lift and thrust to ride across the water. The bicycle will then be used to further develop and test the actuators that Liquid Ideas currently has. This report contains information from the concept design report on how the final design was chosen and detailed information on the final design, as well as plans for manufacturing, assembling, and testing the completed project.

High Temperature Filter Test Unit Upgrades, Blair Frandeen, Will Schill, Erick Shewmaker, Joshua Turgeon

Mechanical Engineering

The purpose of this project was to improve the existing High Temperature Filter Test Unit (HTTU) by optimizing performance and adding new features. These features include viewing ports and a camera system for observation of tests, a leak detection system, and a flame impingement system. Additional considerations included improving the current operation of the HTTU by reducing test time and energy loss. The HTTU is designed to test High Efficiency Particulate Air (HEPA) filters at temperatures up to 1300 ˚F, creating conditions which simulate a fire in a chemical processing facility. The HTTU was originally built as a Cal Poly …

Bicycle Wheel Test Machine, Dylan Harper, Kevin Hom, Ross Williams

Mechanical Engineering

In recent years, the cycling industry has witnessed huge advancements in bicycle components and materials. The age old goals of speed and low weight are still present today, but the pursuit of these goals may be reducing the structural stability of various components integral to wheel performance, including the wheel hub bearings. These bearings are invaluable to bicycles but little is known about how the forces and loads applied to a bicycle affect the performance of these bearings. Broken axles and hubs are indicators of significant stresses within the hub, but little is known about how the resulting deformation affects …