Other Mechanical Engineering Commons^™

A Study Of Constant Voltage Anemometry Frequency Response, Alex D. Powers

Master's Theses

The development of the constant voltage anemometer (CVA) for the boundary layer data system (BLDS) has been motivated by a need for the explicit autonomous measurement of velocity fluctuations in the boundary layer. The frequency response of a sensor operated by CVA has been studied analytically and experimentally. The thermal lag of the sensor is quantified by a time constant, M_CVA. When the time constant is decreased, the half-amplitude cut-off frequency, f_CVA, is increased, thereby decreasing the amount of attenuation during measurements. In this thesis, three main approaches have been outlined in theory and tested experimentally …

Design And Analysis Of A Lift Assist Walker, Deep P. Shah

Master's Theses

Walkers provided stability to the elderly but cannot assist a person from sitting to standing. The objective of this project is to present the design and analysis of a lift assist walker. This report discusses the design and analysis of a collapsible lift assist walker capable of lifting a patient up to 250 lbs. from seated to standing in under 10 seconds. The designed walker utilized a two stage scissor mechanism with a gas spring assisted embedded linear actuator.

Machine Components Test, Brandon Younger, Lauren Romero, Carlos Padilla

Mechanical Engineering

To enhance California Polytechnic State University’s Mechanical Engineering program, Dr. Schuster has sponsored Brandon Younger, Lauren Romero, and Carlos Padilla to design and develop a new lab for students in the Intermediate Design class to test real mechanical components. This report discusses the background and ideation process that lead to the development of the Educational Mechanical Breadboard for Transmission System Components (Machine Components Test). Additionally, detailed drawings, 3D modeling, testing plans, and analysis are included to show how the Machine Components Test design will work and be validated.

Squirting Balloon Toy, Rachael Schelley, Elizabeth Wilhelm

Mechanical Engineering

The main goal of the Squirting Balloon Toy project was to create a new toy that combined both a helium balloon and a squirting water component near the base of the balloon. The toy will be sold at theme parks, fairs, and to other retailers such as toy stores with the target audience of primarily children and their parents, or any individuals seeking a good laugh when they spray their unsuspecting target. As a result, the toy was designed to be both visually appealing and to have an element of surprise. After testing and analyzing four different conceptual designs, two …

Underwater Rope Fatigue Testing Machine, Napoleon Nino, Andrew Pimentel

Mechanical Engineering

The design and fabrication of an underwater rope fatigue testing machine meant to simulate the effects of an oceanic environment and the effects on rope.

High Temperature Hepa Filter Test Unit Upgrades, Alexander Krippner, Ian Corcorran, Michael Burlando

Mechanical Engineering

No abstract provided.

A Concept Validation Of A Magnetometry-Based Technology For Detecting Concealed Weapons In Vehicle Door Panels, Nar Vang

Master's Theses

Acts of insurgency have become an increasing threat resulting in extensive measures being taken by the law enforcement authorities to mitigate their devastating effects on human life and infrastructure. This thesis introduces a magnetometry-based information, and signal processing methodology for detecting concealed ferrous objects in vehicle body panels. From extensive literature research, it was observed that while magnetic sensors have been used in a variety of related applications, but they have not been extensively applied to the on-road detection of firearms and explosives concealed in vehicles. This study utilized an extensive experimental protocol for preliminary concept validation. The main idea …

Tadpole Tandem Electrically Assisted Tricycle, Austin Frederickson, Anthony Jacques, Kris Lawrence, Preston Mcelroy

Mechanical Engineering

The purpose of this senior project was to investigate the possibility of making bikes (as a regular mode of transportation) look much more appealing to the general public. To that end, an electric motor assist system was added to make it easier for the operators of the vehicle. A fairing was added to protect the rider from wind and rain, and an electrical subsystem consisting of a microcontroller and many other components was also added. The electrical subsystem was meant to store the information of different riders, calculate calories burned using a heart beat sensor, and increase visibility using strategically-placed …

Freedom Ski, Toby A. Goldsteinholm, Ashley Scharff, Justin Satnick, Markus Rutner

Mechanical Engineering

The current availability of water skis for people who are paraplegic or quadriplegic is very limited. The aim of our project is to design a system that improves upon the current models of specialized water skis. Our intent is to create a waterski system that is structurally stable and handles responsively, in order to ensure that anyone is capable of effectively using our system to waterski.

The main client of our project is Quality of Life Plus, an organization that aims to aid veterans of the armed forces who have physical disabilities to still enjoy a good quality of life. …

Jonathan’S Natural Juices Mechanical Juice Dispenser, Andrew Meyer, Jesus Gutierrez, Danielle Lauinger

Mechanical Engineering

Team AJD was tasked with trying to create a juice dispenser that did not utilize pumps, but rather explore the venturi effect to see if it could be a suitable substitute. The venturi effect is when a fluid in a pipe goes through a gradual reduction in diameter in a pipe to increase the velocity and lower the pressure of a fluid. Utilizing this principle the team constructed a testing device to be able to run tests and verify the theory. The team was able to verify that the venturi effect was able to make juice at the correct mix …

Smart Water Meter, Jeff Hufford, Eric Adler, Garrett Hall

Mechanical Engineering

No abstract provided.

Solar Decathlon 2015, Solar Cal Poly; Solar Cal Poly Project Engineers, Cristina Paquin, Julien Blarel, Sanchit Joshi

Mechanical Engineering

No abstract provided.

Vibration Table For Environmental Chamber, Michael Czabaranek, Dylan De Caussin

Mechanical Engineering

No abstract provided.

Solar Decathlon Plumbing Subsystem Final Design Report, Robert Burtt, Chris Lutze, Tyler Dunaway

Mechanical Engineering

The U.S. Department of Energy announced it will be hosting an international public competition called the Solar Decathlon in Irvine, CA during October 2015 to showcase high-efficiency houses. Cal Poly students created a team – Solar Cal Poly – to participate. Three mechanical engineering students joined the team to work on the plumbing section of the competition. The team completed multiple iterations and designs of the plumbing system within the Solar Cal Poly house as the house was designed and redesigned. The construction and final design of the plumbing system will be decided by the construction crew and architecture team …

Solar Cal Poly Water Systems, Jake L. Morris, Zachary F. Yasuda, Lauren P. Jones

Mechanical Engineering

No abstract provided.

Solar Cal Poly Active Hvac Project, James Cornish, Jake Cosmo, Patrick Weston

Mechanical Engineering

For this project, the goal was to conceptualize, design, test, and implement an active HVAC system to be used in the Solar Cal Poly house competing in the Department of Energy’s 2015 Solar Decathlon. With many house iterations, it was decided to use a split system with an outdoor heat pump and indoor air handler, paired with a HRV for ventilation. Through system modeling using Design Builder and Energy Pro 6.5, the cooling load of the house was determined along with the cooling schedule. The foreseen safety precautions and limited construction time guided the entire project, along with the active …

Evaluation Of Design Tools For The Micro-Ram Air Turbine, Victor Fidel Villa

Master's Theses

The development and evaluation of the design of a Micro-Ram Air Turbine (µRAT), a device being developed to provide power for an autonomous boundary layer measurement system, has been undertaken. The design tools consist of a rotor model and a generator model. The primary focus was on developing and evaluating the generator model for the prediction of generator brake power and output electrical power with and without rectification as a function of shaft speed and electrical load, with only basic manufacturer specifications given as inputs. A series of motored generator evaluation test were conducted at speeds ranging from 9,000 to …

Beverage Dispensing Backpack Design And Business Plan, Sterling Blake Grande

Biomedical Engineering

Grande Beverage Equipment

Mission Statement:

To deliver beverage dispensing products, services, and solutions to our customers in innovative and cost effective ways.

Product:

We provide portable beverage dispensing backpacks that can deliver soda or beer from pressurized tanks.

Parker Hannifin Chainless Challenge 2014-15 Senior Design Project, Matt Pallotta, Nathan Klammer, Kemper Whaley, Jack Rechtin

Mechanical Engineering

California Polytechnic State University has been invited to compete in the Parker Hannifin Chainless Challenge Competition in 2014-15. Cal Poly has chosen a team of mechanical engineering students to take part. We have named our team “Bike Under Pressure” and all references as such refer to the team.

The challenge is to build a bicycle which does not have a solid mechanical connection between the power input of the rider to the power output of the wheel(s). After conducting research into different previous designs and brainstorming designs of their own, Bike Under Pressure developed two conceptual designs. One design featured …

Net Zero Residential Design For Solar Calpoly, Bryce Reiko Willis

Master's Theses

The Department of Energy (DOE) confirmed Team Solar Cal Poly from California Polytechnic State University, San Luis Obispo, as a competitor in the 2015 Solar Decathlon in February 2014. The Solar Decathlon is a biennial collegiate competition to construct a net-zero home and operate it for a week of “normal use”. Solar Cal Poly needed assistance with passive and active HVAC systems for the design, and thermal load models. The competition will take place in Irvine, CA [33.67⁰, 117.82⁰ W] from September 27 – October 3, 2015. After the completion, a potential final location for the house will be Santa …

Compact Deployable Antenna For Cubesat Units, Sarah Bolton, Dominic Doty, Peter Rivera

Mechanical Engineering

CubeSats are an appealing platform for space exploration due to their low build and launch costs. Due to their small size, communication rates are often severely limited, preventing missions beyond low earth orbit. A low cost, high gain, high frequency antenna is needed to extend the capabilities of CubeSats.

The goal of the project was to design and build an axisymmetric parabolic antenna that could be deployed from a 10cm x 10cm x 15cm (1.5U) volume and operate at Ka band frequencies. The design selected consisted of an expanding perimeter truss supporting a tensioned mesh reflector. The perimeter truss was …

Torque Testing System: Flowserve Corporation, Taylor Catlin, David Reese, Bodin Rojanachaichanin, Kyle Stangland

Mechanical Engineering

Flowserve Corporation provides products and customer support to companies in the process industry for the design, testing, and manufacturing of mechanical seals. This includes, but is not limited to, companies concerned with power generation, fossil fuels, water resources, and chemical processing. In industries where fluid transportation is leveraged, mechanical seals have been utilized in pumps to increase performance. A mechanical seal is a design feature in pumps that seal the impeller housing and allow for little to no leakage. This technology is cutting edge and a considerable amount of research pertaining to the advantageous effects of specialized surface features is …

Farmbot, James Cruz, Scott Herrington, Bryan Rodriguez

Mechanical Engineering

The purpose of this project was to develop the hardware for the current Farmbot to perform its primary functions, and to create a template for a system that would be adaptable for future users and developers. The scope of the project included creating a universal tool mount, a seeding system, and a watering and nutrient mixing system. This project was brought to the students by sponsor Rory Aronson, the creator of Farmbot. The Cal Poly Farmbot team was able to go through an extensive brainstorming and iterative process for each part, where testing was able to be incorporated immediately due …

Mhttu Implementation Final Project Report, Angelica Ramirez, Julian Samayoa, Matt Keeble

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort in developing fireproof high-efficiency particulate air (HEPA) filters. Due to the nature of LLNL’s research, the air leaving its lab facilities must be filtered before it is released into the atmosphere; thus, each laboratory is equipped with large banks of HEPA filters through which all internal air is exhausted. Over the years, however, fires have erupted in the labs and entire banks of HEPA filters have been destroyed, resulting in repairs and crucial downtime that prove costly.

Engineers and scientists alike have been seeking a permanent solution to this problem, and one …

Compression Tester Shop Press, Colby Johnson, Brett Russon, Taylor Vandenhoek

Mechanical Engineering

A piece of machinery designed to carry out compression and bending tests on building materials constructed by the Center for Vocational Building Technologies (CVBT) in Isarn, Thailand.

Aeroponic/Hydroponic Growth Module, Sean Marrs, Joshua Moreno

Mechanical Engineering

No abstract provided.

Experiment And Simulation Of The Acoustic Signature Of Fatigued-Cracked Gears In A Two-Stage Gearbox, Matthew James Ostiguy

Master's Theses

This thesis focuses on the development of a health monitoring system for gearbox transmissions. This was accomplished by developing and understanding a two-stage gearbox computer model that emulates an actual gearbox test rig. The computer model contains actual gearbox geometry, flexible shafts, bearings, gear contact forces, input motor torque, output brake torque, and realistic gearbox imbalance. The gear contact force of each gear stage and the input bearing translational acceleration were the main outputs compared between a healthy gearbox and damaged gearbox computer model. The damage of focus was a fatigue crack on the input pinion gear. A sideband energy …

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan, David Jonathan Gonzalez Campos

Master's Theses

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan

David Jonathan González Campos

For many engineers that use finite element analysis or FEA, it is very important to know how to properly model and obtain accurate solutions for complicated loading conditions such as shock loading. Transient acceleration loads, such as shocks, are not as common as static loads. Analyzing these types of problems is less understood, which is the basis for this study. FEA …

Adaptive Kayak Seating: The Tide Rider 360, Irvin Camacho, Grant Petersen, Audrey Riddle, Andrea Voigt

Mechanical Engineering

The Adaptive Paddling Program at California Polytechnic State University has sponsored the construction of an adaptive kayak seat, the Tide Rider 360, to provide paddlers with disabilities sufficient trunk support while out on the water. In particular, this design focused on providing the least restrictive environment for all users while still providing sufficient lateral, neck, back, and hip support. This seat is intended for use in the quarterly Adaptive Paddling Program to allow people with disabilities to experience the joys of kayaking in the most comfortable and supportive environment possible.

The following report details the background research, design development, manufacturing, …