Mechanical Engineering Commons^™

The Importance Of Radiation As A Means Of Controlling Surface And Internal Temperatures Of A Semi-Infinite Solid, Kenneth C. Woodruff Jr.

Masters Theses

"This problem is concerned with the temperature history of a semi-infinite solid bounded by one flat surface.

Heat was applied by convection from a hot fluid to the flat surface of the solid which was originally at a uniform temperature. Heat was radiated from the flat surface to black space and conducted into the solid according to Fourier's law. The temperature at the surface, and at several points beneath the surface, was determined as a function of time.

A method for solution of such a problem is demonstrated here by the use of numerical analysis and the Royal McBee LGP …

Influence Of The Heat Release On Thermodynamic Characteristics Of Diesel Engines., Shirish Amritlal Desai

Masters Theses

"A Diesel. engine is an internal. combustion engine in which the fuel. is ignited by the heat of compression. Thus, the Diesel. engines are known as compression-ignition (C.I.) engines. The engine received its name: from its inventor, Dr. Rudolf Diesel., who in 1893 published a book under the title, '' Theory and Construction 0£ Rational. Diesel Engine". The first successf'u1 Diesel. engines, using liquid: fuel., which was injected into the cylinder by a blast of high-pressure air, were manufactured by the M.A.N. Company of Germany in 1895"-- Introduction, p. 1

Thermal Resistance Of Bonds And Contacts, David Marion Lewis

Masters Theses

"The adhesive and sealant Industry has more than kept pace with our rapidly expanding technology of today. This growth has left the standardization of data on adhesives far behind and lack of this data is obvious. Of the many applications, particularly as related to space technology and energy conversion, the resistance to the flow of heat offered by the bond layer is of considerable importance.

Little information is available on the effect of adhesives on heat transfer. In connection with their work on honeycomb panels, Rankle, Gier, and Bevans (7) determined the thermal resistance of the particular type of adhesives …

Forced Convection Heat Transfer Coefficients And Induction Heating, Max Edwin Light

Masters Theses

“The purpose of this study was to design and build an apparatus to experimentally determine the convective heat transfer coefficients for water flowing in a horizontal tube at turbulent flow. Also it was planned to use the apparatus to investigate the spatial dependence of energy deposition by induction heating.

An instrument and measuring techniques were developed that gave reasonable correlations between experimentally determined heat transfer coefficients and values calculated from generally accepted heat transfer relationships developed by other experimenters. Most of the calculated values were within ± 10% of the experimental values for a wide range of flow rates.

It …

The Design, Construction, And Evaluation Of A Vortex Stabilized Plasma Generator, Ronald Ray Williams

Masters Theses

“This report presents the design, construction, and evaluation of a vortex stabilized arc plasma generation facility operating on argon.

The facility consisted of five basic systems; the plasma genera- tor, the electrical power system, the argon flow system, the cooling system, and instrumentation.

The facility was designed to meet four general requirements; stable arc operation, low electrode deterioration, low cost of construction, and provisions for determination of the operating characteristics and thermal properties of the plasma.

Experimental results obtained in the laboratory agreed well with the design conditions. The rate of energy dissipated in the electric arc varied from 7. …

The Design, Construction, And Calibration Of An Angular Accelerameter., Walter Earl Palm

Masters Theses

"The purpose of this work was to design, construct, and calibrate an angular accelerometer for continuous operation. The design uses four symmetrically placed springs connecting a ring and hub. Strain gages are mounted on the springs in a Wheatstone bridge arrangement. When the entire unit is subjected to an angular acceleration, the ring deflects causing an output voltage. This voltage is proportional to the deflection which is shown to be a function of the angular acceleration. The accelerometer was constructed to operate at frequencies up to 120 cps. The calibration was accomplished by using a simple harmonic motion input"-- Abstract, …

Theoretical Investigation Of Steam Jet Cleaning, Jaswant T. Lotwala

Masters Theses

"Steam cleaning methods are used by industries to remove mass of dirt and grease deposits from machine parts and other surfaces. It is necessary to know the rate at which this mass can be removed from a surface. The present investigation was made to determine this rate of mass removal. The mass transfer rate is influenced by two phenomena; namely, heat transfer and momentum transfer. Both of these were discussed and the results obtained from the analysis were used in determining the total mass transfer rate. The effects of various parameters, such as density and velocity of the cleaning fluid, …

The Effect Of An Induction Field On Transducers., Ratilal S. Patel

Masters Theses

"This report presents the results of an experimental investigation on the effect of an induction field on transducer output. Various types of transducers; strain gages, thermocouples, and thermistors, were used. The changes in the output of these transducers were measured for various induction field conditions.

Measurements must often be made where strong electrical fields are present. Strain gages are used to measure the stresses in electrical machinery. Thermocouples and thermistors used for measuring the temperature of materials undergoing heat treatment with an induction heater are also subjected to an induction field.

The general experimental procedure was the same throughout the …

The Effect Of A Lubricant On Tool-Workpiece Interface., Kenneth Eugene Spencer

Masters Theses

"The purpose of this study was to compare the effects of cutting fluids and the method of application to an orthogonal cutting process.

The cutting operation was performed on a lathe. The fluids use d were compressed air and a solution of emulsifiable oil and water.

The flooding of the area was produced by directing a copious supply of fluid over the cutting a rea. The directed stream was obtained by pumping the fluid through a small hole drilled into the tool holder, immediately above and behind the tool face, which directed the fluid at the tool-chip interface.

The results …

Solid-Phase Welding Of Nodular Iron To Low Carbon Steel., Scott H. Carriere

Masters Theses

“This paper presents an experimental investigation of the possibility of using solid-phase welding to join nodular iron to low carbon steel. Included is a review of available literature on solid-phase welding, tracing its origin from early Egypt to the present day. There was no previously reported work found on the welding of nodular iron to steel.

Experiments were performed to determine what temperature-pressure combination gave the greatest ultimate tensile strength These experiments resulted in the best welds being produced with an end load of 7000 pounds (35.700 psi) on a half inch diameter sample. The majority of these welds proved …

Investigation Of The Effect Of The Wall Thickness On The Residual Stresses Developed In Thick Wall Cylinders Due To Water Quenching From The Outside Surface., Ghanshyam Chandubhai Patel

Masters Theses

"This investigation has been made to determine the residual stresses in thick wall cylinders by the use of strain gages.

The cylinders were quenched from their outer surface i n water from a temperature of 1000°F, and the resulting residual stresses were determined by Sachs boring-out method. The effect of the wall thickness of the cylinders on the residual stresses and the error developed due to the boring operation were discussed"--Abstract, p. ii

Determination Of The Shapes Of Fixed And Moving Polodes Of Class Ii Four Bar Mechanisms., Manharkumar Kantilal Sheth

Masters Theses

"The purpose of this thesis is to determine the shapes of fixed and moving polodes of class II four bar mechanisms, since there has been little, or no work done in determining their shapes.

Twenty different mechanisms were taken to study the shape of the fixed and moving polodes. The best equation which fits each curve was found by using the least square method in polynomials. Coefficients for each curve were determined with the help of the I.BM 1620 computer. The equation was found to be a six-degree polynomial which fits very well to each curve. There seems to be …

The Electrical Analogy Of Critical Speed For The Transverse Vibrations Of A Shaft With One, Two And Three Masses, Ashok Z. Patel

Masters Theses

"The object of this thesis is to determine the critical speed of a shaft by an electrical analogy. The shaft considered is of constant diameter and is simply supported at the ends by fixing it in self aligning bearings. The weight of the shaft is assumed to be proportionally distributed in the attached masses.

The original system is first of all converted to an equivalent simple spiring mass system by calculating the influence coefficients and hence frcan these determining the spring constants. The spring mass system obtained is then converted to an equivalent electrical circuit.

A sine-square wave frequency generator …

The Effect Of Surface Roughness, Cure Pressure, And Temperature Level On The Thermal Resistance Of Bonds And Contacts, David Leo Schwaller

Masters Theses

"This investigation was conducted to determine the thermal effect of temperature level, surface roughness, and curing pressure on bars and bonded interfaces.

The equipment used in this investigation is shown in Fig. 1 and Fig. 2. The four specimens used, cylindrical aluminum alloy bars, were cut radially at their midpoints and faced on a lathe. Heat was supplied by an electrical resistance heating element and an ice bath was used to conduct heat from the alloy specimen. A heat shield was used to insure one dimensional heat flow. Spacers were placed in the insulation at the top, the interface, and …

A Theoretical And Experimental Study Of The Stress Distribution In An Infinite Plane Shrink-Fitted On Four Circular Elastic Pins, Charles H. White

Masters Theses

"The purpose of this study is to show a general method of solution for multiple inclusions in an infinite plane. The shrink-fitting of an infinite plane upon the inclusions, or pins, will be simulated by force-fitting the pins into a large sheet of birefringent material, to obtain an experimental verification of the analytical solution.

The problem to be approached is that of four circular elastic pins shrink-fitted in an infinite plane. The method of superposition will be used, and the stresses at any point in the plane found with respect to a common origin of coordinates. It will first be …

The Effects Of Granular Size On The Thermal Conductivity Of Fine Sand, Fikri Yalvac

Masters Theses

"The Thomas method (1) for determining the thermal conductivity of solid materials can be used for the determination of the thermal conductivity of granular materials. In this thesis this method has been used to determine the effect of the granular size of sand cn its thermal conductivity.

River sand was classified according to size by the Tyler Standard Screen Scale into 50-60, 50-80, 80-100, 100-200, and below 200 mesh size. These sands were used for the experiments. The clay was separated from these samples to obtain pure river sand for the experiments.

According to the International Critical Tables, the thermal …

A Rubber Membrane Analogy For The Study Of Shafts In Torsion., Myron D. Bruns

Masters Theses

"The thesis presents a review of literature giving reference to several books which present the many and varied methods of determining the shearing stresses in shafts. However, no reference was found that used a rubber membrane analogy similar to that used in th is thesis. The theory of torsion, the membrane theory, and its analogy have been presented for a better understanding of the subject. Illustrations are used freely for clarity.

Analytical methods and solutions are given for two problems. The first method is that of writing a Saint-Venant stress function and satisfying the necessary conditions for it to be …

Use Of Sr-4 Strain Gages Under Hydraulic Pressure, Manubhai M. Patel

Masters Theses

"In this investigation an attempt has been made to determine the effects of hydraulic pressure on SR-4, type A-5 strain gages. A thick-walled aluminum alloy cylinder without end constraint was used to make an experimental study of the effects of hydraulic pressure on these strain gages.

The behavior of this cylinder under different internal hydraulic pressures was also studied by measuring the strains by means of strain gages which were attached to the inside and outside surface of the cylinder. The problem has been studied by applying pressures up to 4800 psi.

Because of the high internal fluid pressures various …

The Design, Construction, And Operation Of A Conducting Field Analog Computer., Richard T. Johnson

Masters Theses

"The purpose of this investigation is to design and construct a simple conducting field analog to solve problems described by the two-dimensional Poisson or Laplace equations. Decisions concerning choice of conducting media, construction of problem models, and design and construction of a specialized power supply with instrumentation were based on the results of previous experiments. Several problems are solved using the designed apparatus. Partial solutions to these problems are displayed in graphical form.

The greatest deviation of the experimental results from iterative values was consistently less than 8%. In most cases the deviation was less than 6%. The console arrangement …

A Study Of Rotational Critical Speeds For A Multi-Mass System By Influence Coefficients, Kantikumar G. Patel

Masters Theses

"In this investigation an attempt has been made to determine the critical speeds of a multi-mass rotational system by using influence coefficients. Modes of vibrations are also examined at these critical speeds.

A shaft carrying five masses, supported by bearings at the ends, has been studied analytically. The length of the bearings is considered small with respect to the shaft length and therefore, the configuration is assumed to be point supported as a simple beam. The five masses, each weighing one pound, were placed at equal distances of 10 inches on a 60 inch shaft. The critical speed was examined …

Minimum Frictional Characteristics Of Optimum Journal Bearings., Navinchandra F. Shah

Masters Theses

"This investigation was conducted to develop a graphical representation to determine the optimum bearing conditions for minimum friction and to establish a theoretical approach for journal bearing design.

A series of graphs has been plotted for· the coefficient of friction versus the eccentricity ratio based on the. Sommerfeld number derived from Reynolds' differential equation, f or optimum journal bearings.

The results obtained in this research have been compared with those developed by other investigators. This comparison confirms the validity of the results presented in this thesis, so that it could be used advantageously for the design of optimum journal bearings"-- …

Methods For Synthesizing A Four-Bar Mechanism So It Will Have A Low Value Of Jerk., Ronald D. Brenner

Masters Theses

"The purpose of this thesis is to find a method of synthesis, for a four-bar mechanism, so that the mechanism that is synthesized will have a low value of jerk. In the field of synthesis there has been little or no effort made to consider jerk when designing mechanisms.

Jerk is defined as the time rate of change of acceleration. Jerk can also be expressed as being proportional to the time rate of change of the inertia forces. When the jerk is large the effect on the link of a mechanism is the same as that of an impact load. …

A Study Of The Angular Velocity In A Liquid Induced By A Vortex In An Emptying Container, James Paul Hartman

Masters Theses

"Previously a limited amount of investigation has been done to describe the rotational motion of fluid in a draining tank. To date tank design has been based on trial and error, since the physical mechanisms of actual draining have not been recognized. This investigation has been made to develop a technique for the measurement of the motion of the fluid during the draining process and to present the results of the observed surface velocity of the liquid as a function of depth of fluid and its distance from the center of the vortex core. Many previous investigators of vortex behavior …

An Investigation Of Optimum Journal Bearings., Kulin Purshotam Maskai

Masters Theses

"Not much has been done towards calculating the "Optimum Bearing" from the point of view of maximum load capacity or minimum friction. It has been found that there 1 is not much difference in the "Optimum Bearing" proportions, as calculated, considering either minimum friction or maximum load capacity

Journal bearings are commonly used and they play a very important role in reducing friction and wear. Engineers use past experience in choosing a bearing for the given conditions. A bearing design can be obtained if 'Optium Bearing' proportions are calculated as suggested by Kingsbury (1) in his article on 'Optium Conditions …

A Study Of Rotational Critical Speeds For A Multi-Mass, Multi-Span System, Pravinchandra M. Upadhyay

Masters Theses

"It is well known that the unbalanced inertia forces present in rotating shafts set up violent vibrations in a transverse direction at certain speeds known as critical speeds, whirling speeds or whipping speeds. Therefore one who deals with the design of rotating machine parts, such as turbine rotors, multi-cylinder engine crankshafts etc., must consider transverse vibrations of rotating parts.

Practical solutions for finding the critical speeds of simple rotating systems, such as a single disk on a shaft with a single span, were derived by many authors. But as the number of loads and spans increases the problem becomes complex …

Investigation Of Ablation Materials, John Martyn Schattyn

Masters Theses

"The desired result of this paper is to determine what effect the physical and thermal properties of a material have on the ability of that material to act as an ablation heat shield. On the basis of their physical properties, five materials, nickel, beryllium, fused quartz, teflon, and phenolic-nylon, were chosen as examples.

The tools used for this study are heat transfer equations involving a change in material phase. The resulting criteria may be assumed applicable to any material exhibiting one of the four types of ablation processes"--Abstract, page 2.

The Effect Of Reradiation On Heat Transmission, Arvindkumar M. Shah

Masters Theses

"In heat transmission by radiation, it is very easy to find the heat transmitted from one surface to another. Much work has been done in this area. The problem becomes complicated when the two surfaces are enclosed or joined by an enclosure. Such problems frequently arise in the design of furnaces. One problem is linked with the economy of fuel, by proper consideration of heat losses through the openings in furnace walls such as doors and burner openings. A second problem is associated with the heating capacity and useful heat transfer through the openings such as heat ports in walls …

Heat Transfer Through A Honeycomb Sandwich Panel, Jayantilal J. Darji

Masters Theses

"Progress brought about by human ingenuity and technological developments has been always accompanied by fresh problems, the successful solution of which enables still further progress.

The recent developments in space exploration and exploitations are astounding. The coming years are likely to bring forth many remarkable achievements. Except for several engineering problems encountered with these developments the pace of progress is to study the heat transfer from honeycomb sandwich panels as an outer skin of high performance flight vehicles. The quantity of heat transferred through the panel is important in study of such vehicles, and methods or equations for determining this …

Analysis Of A Char-Forming Ablator, William J. Reilly

Masters Theses

"The purpose of this thesis is to conduct an analytical analysis of a char-forming ablation material. This is one phase of ablation heat transfer.

Fourier's general equation for one dimensional heat conduction is transformed to moving coordinates and is then solved using the applicable boundary conditions. Solutions of this equation are valid for initial studies in ablation heat transfer"--Abstract, page ii.

Methods For The Determination Of The Thermal Conductivity Of Solids., A. M. Sivadasan

Masters Theses

"The thermal conductivity of materials is of considerable practical and theoretical interest. Numerous publications on this subject have been presented with widely varying approaches and applications being made. Perhaps for no other thermal property are the published results so widely divergent and subject to such great uncertainty, particularly at high temperatures. This is partly due to unsolved difficulties in measurement, but perhaps to an even greater extent to the fact that the thermal conductivity of a material depends on its physical characteristics as well as some environmental factors such as humidity and temperature. In the case of metals or alloys, …