Mechanical Engineering Commons^™

Perfectly Matched Layer Absorbing Boundary Conditions For The Discrete Velocity Boltzmann-Bgk Equation, Elena Craig

Mathematics & Statistics Theses & Dissertations

Perfectly Matched Layer (PML) absorbing boundary conditions were first proposed by Berenger in 1994 for the Maxwell's equations of electromagnetics. Since Hu first applied the method to Euler's equations in 1996, progress made in the application of PML to Computational Aeroacoustics (CAA) includes linearized Euler equations with non-uniform mean flow, non-linear Euler equations, flows with an arbitrary mean flow direction, and non-linear clavier-Stokes equations. Although Boltzmann-BGK methods have appeared in the literature and have been shown capable of simulating aeroacoustics phenomena, very little has been done to develop absorbing boundary conditions for these methods. The purpose of this work was …

Quantifying Multiple Types Of Damping Acting On Bronze-Wound Guitar Strings, Jonathan Christian

Purdue Polytechnic Masters Theses

The goal of this study was to quantify the contributions of multiple damping types acting on guitar strings for each mode over a wide frequency range so that design variables could be identified to one day create frequency based damping in guitar strings. Structural dynamic testing was used to obtain the time-response of a vibrating string in open air and in a vacuum. From this signal, each harmonic was filtered and the decay envelope was curve-fitted with a function that was a linear summation of decay functions. From the curve-fits, the damping coefficients for aerodynamic, friction, and material damping were …

Applied Control Strategies At A Cogeneration Plant, Joseph William Burns

Master's Theses

The purpose of this paper is to demonstrate the effectiveness of “classical strategies for dynamic control” on authentic cogeneration processes. These strategies are applied to several processes at the University of Connecticut’s cogeneration plant. Case studies of their applications are presented in this paper. Strategies that are applied include the following:

1) The classical SISO feedback structure

2) The First Order Plus Dead Time (FOPDT) process model

3) The Internal Model Control (IMC) correlations for PI controller tuning

4) Static feed forward with feedback trim

5) Cascade Control

Multiple Motors With Single Controller, Jason Eugene Barbeiro, Benjamin Erik Johnson, Abraham Garza

Mechanical Engineering

No abstract provided.

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

A Virtual Supply Airflow Rate Meter In Rooftop Air Conditioning Units, Daihong Yu

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Virtual sensing technology aims to estimate difficult to measure, expensive, or new quantities by using multifarious mathematical models along with non-invasive and low-cost measurements. Such embedded intelligence is a key to improving the performance of building systems in terms of functionality, safety, energy efficiency, environmental impacts, and costs. Considering the progress that has been achieved over many various fields (e.g., process controls, automobiles, avionics, autonomous robots, telemedicine) within the last two decades, numerous intelligent features have been incorporated and enabled that would otherwise not be possible or economical.

To identify the potential opportunities and research/development needs of virtual sensing technology …

Control System For Mass Spectrometer, Jian Xu

Purdue Polytechnic Masters Theses

Mass spectrometry (MS) is a very popular analytical methodology that measures the mass of ions using a mass spectrometer. It is widely used for determining masses of chemicals, the elemental composition of a sample and molecule structure. The process of mass spectrometry normally consists of ionizing chemical compounds to ions and measuring their ratios of mass to charge for analysis.

MS instruments consist of three modules: Ionization, Analysis and detection. A LabVIEW system was developed to control the three modules of a mass spectrometer, giving the required signals in a right sequence. Experiments can be carried out by using the …

Airplane Landing Flare-The Last 5 Seconds, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Effects Of Inlet Conditions On Diffuser Outlet Performance, Zaccary A. Poots

UNLV Theses, Dissertations, Professional Papers, and Capstones

Building air distribution terminal system designers and system installers require accurate quantitative information on the performance of the installed system to achieve optimum efficiency and levels of human comfort. This requires field installation adjustment values from published ideal pressure loss, air distribution and sound generation installation performance. This study documents the air output performance of different installation configurations of six types of ceiling diffusers and compares the results to performance when installed according to ANSI/ASHRAE Standard 70-2006. A diffuser inlet supply plenum was designed for optimum flow and used to acquire a baseline set of data covering the six types …

A Virtual Supply Airflow Rate Meter In Rooftop Air Conditioning Units, Daihong Yu

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Virtual sensing technology aims to estimate difficult to measure, expensive, or new quantities by using multifarious mathematical models along with non-invasive and low-cost measurements. Such embedded intelligence is a key to improving the performance of building systems in terms of functionality, safety, energy efficiency, environmental impacts, and costs. Considering the progress that has been achieved over many various fields (e.g., process controls, automobiles, avionics, autonomous robots, telemedicine) within the last two decades, numerous intelligent features have been incorporated and enabled that would otherwise not be possible or economical.

To identify the potential opportunities and research/development needs of virtual sensing technology …

Robust Region Tracking In Multi-Agent Systems Utilizing Sliding Mode Control: Theory And Applications, Mark Bacon

Master's Theses

This thesis presents a methodology to bring controlled agents within a moving region despite agent interaction dynamics, uncertain forces and parameter variation. The logic is derived from traditional Sliding Mode Control theory with an expanded boundary layer which allows position deviation from the region center to specified bounds. As an example of the utility of this control, multiple methods of herding (controlling passive agents by appropriate positioning of controlled agents) are presented.

Lv-11-C031: Measured Levels Of Hospital Noise Before, During, And After Renovation Of A Hospital Wing, And A Survey Of Resulting Patient Perception, Cassandra H. Wiese, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Acoustic conditions in hospitals can negatively influence a patient’s physical and psychological health. This paperreports on noise levels measured before, during, and after renovation of a hospital wing in an Omaha, Nebraska, facility thatregularly receives unsatisfactory noise scores on patient satisfaction surveys. Sound pressure levels were logged every 10seconds over four-day periods in three different locations: at the nurses' station, in the hallway, and in a nearby patient’sroom. The resulting data have been analyzed in terms of A-weighted equivalent sound levels (LAeq) as well as variousexceedance levels (Ln). Results indicate that sound levels did not change much due to the …

Streaming Potential Generated By A Pressure-Driven Flow Over Superhydrophobic Stripes, Hui Zhao

Mechanical Engineering Faculty Research

The streaming potential generated by a pressure-driven flow over a weakly charged slip-stick surface [the zeta potential of the surface is smaller than the thermal potential (25 mV)] with an arbitrary double layer thickness is theoretically studied by solving the Debye–Huckel equation and Stokes equation. A series solution of the streaming potential is derived. Approximate expressions for the streaming potential in the limits of thin double layers and thick double layers are also given in excellent agreement with the full solution. To understand the impact of the slip, the streaming potential is compared against that over a homogeneously charged smooth …

Effects Of A Heated Turbulent Boundary Layer On Surface Pressure Fluctuations, David William Rich

Electronic Theses and Dissertations

Recent work has shown that spatial correlation of surface pressure fluctuations in a fully turbulent atmospheric boundary layer (ABL) can give information about the velocity field and turbulence. This is of particular importance to the future of wind energy to predict the incoming velocity flow field of wind turbines so as to actively control them for peak operating efficiency and damage reduction. All of the environmental effects on the surface pressure fluctuations need to be fully understood before a suitable flow prediction algorithm can be constructed. One such environmental effect which has not been previously studied is the effect of …

Quantification Of An Ultrasound Test Apparatus And Its Potential Use To Control Nuisance Species In Commercial Aquaculture Settings, Bradley T. Goodwiller

Electronic Theses and Dissertations

As one step in the investigation of using acoustics to improve aquaculture production, work was pursued on the possible use of ultrasound to control the Bolbophorus trematode in commercial catfish ponds. The trematode population can be controlled by eliminating the host ram's horn snail via exposure to high amplitude ultrasound. Initial laboratory tests indicated that a commercially available sonicator (operating at 20 kHz) is capable of killing individual snails in fish tanks. More thorough testing indicated efficiency rates of approximately 35% on batches of 10 snails. In addition to the snails killed immediately, there was evidence that the sonication technique …

Locating And Extracting Acoustic And Neural Signals, Na Zhu

Wayne State University Dissertations

This dissertation presents innovate methodologies for locating, extracting, and separating multiple incoherent sound sources in three-dimensional (3D) space; and applications of the time reversal (TR) algorithm to pinpoint the hyper active neural activities inside the brain auditory structure that are correlated to the tinnitus pathology. Specifically, an acoustic modeling based method is developed for locating arbitrary and incoherent sound sources in 3D space in real time by using a minimal number of microphones, and the Point Source Separation (PSS) method is developed for extracting target signals from directly measured mixed signals. Combining these two approaches leads to a novel technology …

An Advanced Controller For A Semi-Active Wheelchair Suspension, David J. Smith

Master's Theses

An Advanced Controller for a Semi-Active Wheelchair Suspension was designed, built and tested.  The suspension consisted of a Goodyear 1S3-011 air spring, IQ Valves high speed proportional solenoid valve, and a custom made accumulator.  Several controller designs specific to semi-active suspensions were designed and tested.  The controllers investigated were skyhook, acceleration driven damping, and a combined control law employing both a dual and single sensor version.  The implementation of skyhook control suffered performance degradation from the idealization due to particular elements of hardware, however acceleration driven damping showed a marked and statistically significant improvement over skyhook control, in hardware, by …

The Effect Of Static Pressure On The Inertial Cavitation Threshold And Collapse Strength, Kenneth Bryan Bader

Electronic Theses and Dissertations

The amplitude of the acoustic pressure required to nucleate a gas and/or vapor bubble in a fluid, and to have that bubble undergo an inertial collapse, is termed the inertial cavitation threshold. The hydrostatic dependence of the inertial cavitation threshold was measured up to 30 MPa in ultrapure water using a high quality factor spherical resonator. The threshold increased linearly with the hydrostatic pressure and was found to be temperature dependent. The strength of the bubble collapse at the threshold was measured in terms of shock waves and light emissions. The shock amplitudes increased linearly with the hydrostatic pressure, while …

Reconstruction Resolution Of Coherent Point Sources With Helmholtz Equation Least Squares, Richard Edward Dziklinski

Wayne State University Dissertations

The dissertation investigates the reconstruction of coherent point sources using Helmholtz Equation Least Squares (HELS) method based on measurements in violation of Nearfield Acoustical Holography (NAH) resolution guidelines. In HELS, the Helmholtz equation is solved by matching a series of localized spherical expansion functions to the measured pressures in the field. Expansion coefficients are solved for by least squares and used to reconstruct pressures at the source surface. By approximating the pressure radiation with expansion functions, field and surface pressures can be synthesized, resulting in the possibility of higher spatial resolution than previous generation NAH methods such as Fourier Acoustics …

Parallel-Sparse Symmetrical/Unsymmetrical Finite Element Domain Decomposition Solver With Multi-Point Constraints For Structural/Acoustic Analysis, Siroj Tungkahotara, Willie R. Watson, Duc T. Nguyen, Subramaniam D. Rajan

Civil & Environmental Engineering Faculty Publications

Details of parallel-sparse Domain Decomposition (DD) with multi-point constraints (MPC) formulation are explained. Major computational components of the DD formulation are identified. Critical roles of parallel (direct) sparse and iterative solvers with MPC are discussed within the framework of DD formulation. Both symmetrical and unsymmetrical system of simultaneous linear equations (SLE) can be handled by the developed DD formulation. For symmetrical SLE, option for imposing MPC equations is also provided.

Large-scale (up to 25 million unknowns involving complex numbers) structural and acoustic Finite Element (FE) analysis are used to evaluate the parallel computational performance of the proposed DD implementation using …

Motorcycle Data Acquisition System, Jonathan Luke Harmse

Biomedical Engineering

No abstract provided.

Stochastic Optimal Control In Nonlinear Systems, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Stochastic control is an important area of research in engineering systems that undergo disturbances. Controlling individual states in such systems is critical. The present investigation is concerned with the application of the stochastic optimal control strategy developed by To (2010) and its implementation as well as providing computed results of linear and nonlinear systems under stationary and nonstationary random excitations. In the strategy the feedback matrix is designed based on the achievement of the objectives for individual states in the system through the application of the Lyapunov equation for the system. Each diagonal element in the gain or associated gain …

Modeling Acoustic Scattering From The Seabed Using Transport Theory, Jorge Quijano, Lisa M. Zurk

Electrical and Computer Engineering Faculty Publications and Presentations

Radiative Transfer (RT) theory has established itself as an important tool for electromagnetic remote sensing in parallel plane geometries with random distributions of scatterers, and most recently it has also been proposed as a model for the propagation of elastic waves in layered ocean sediments. In this work the capabilities of this model are illustrated, as the RT method is used to predict backscattering strength from laboratory models of random media. The RT model is characterized by its flexibility on accommodating scatterers in a broad variety of sizes, shapes, and acoustic contrast relative to the background media. Additionally, this formulation …

Intelligibility Of Electrolarynx Speech Using A Novel Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. Following a laryngectomy, some people speak using an electrolarynx which replaces the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the buzzing monotonic sound emitted, the need for a free hand to operate the device, and difficulty experienced by many laryngectomees in adapting to its use. Despite these shortcomings, it remains the preferred method of speech rehabilitation for a substantial minority of laryngectomees. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal …

Final Design Report: Vibration Table For Cvbt- Vt4 Design Team, Thomas Bevan, Matthew Laurino

Mechanical Engineering

CVBT (Center for Vocational Building Technology) teaches villagers in Northeastern Thailand how to make various concrete products. Many of these products require the use of a vibration table in order to remove air and water trapped within the concrete. Removal of these voids improves the outside surface of the molded concrete, and also allows the use of a lower water to cement ratio, allowing a much stronger finished product. The currently used vibration table (VT3) has several disadvantages associated with it, which the new table (VT4) eliminates. Compared with the VT3, the VT4 has a more rigid tabletop and improved …

Adaptive Cutting Force Control For Process Stability Of Micro Ultrasonic Machining, Ala'a M. Al-Okaily

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The growing demand for miniaturized products motivates the advancement in micromanufacturing processes research and development. Micro Ultrasonic Machining (Micro USM) is a downscaled version of a macro USM process that is developed to fabricate complex features in chemically inert, nonconductive, hard, brittle materials such as quartz, glass, and ceramics. These materials have many applications in various fields such as optics, electronics, MEMS, and biotechnology. The micro USM process stability is hard to accomplish, because it is highly influenced by the accuracy of the machining system and the variation of the process control parameters. The repeatability of micro USM machined features …

Increasing The Sensitivity Of Surface Acoustic Wave (Saw) Chemical Sensors And Other Chemical Sensing Investigations, Nina R. Smith

Theses and Dissertations

The work involves the fabrication and testing of three different surface acoustic wave (SAW) device designs, an investigation of nanowires sensitive to chemicals and preconcentrator prototypes to include with chemical sensors. The SAW chemical sensor designs include modifications to a basic SAW device to see if the sensitivity of the SAW device is increased. The modifications consist of etched trenches along the propagation field, coating the device with carbon nanotubes (CNTs) under the chemically sensitive layer and coating CNTs on top of the chemically sensitive layer. SAW devices are coated with Nafion®, a polymer sensitive to ethanol. The tests indicate …

Adaptive Control Applied To The Cal Poly Spacecraft Attitude Dynamics Simulator, Matthew C. Downs

Master's Theses

The goal of this thesis is to use the Cal Poly Spacecraft Attitude Dynamics Simulator to provide proof of concept of two adaptive control theories developed by former Cal Poly students: Nonlinear Direct Model Reference Adaptive Control and Adaptive Output Feedback Control. The Spacecraft Attitude Dynamics Simulator is a student-built air bearing spacecraft simulator controlled by four reaction wheels in a pyramidal arrangement. Tests were performed to determine the effectiveness of the two adaptive control theories under nominal operating conditions, a “plug-and-play” spacecraft scenario, and under simulated actuator damage. Proof of concept of the adaptive control theories applied to attitude …

Ab-10-018: The Effects Of Noise From Building Mechanical Systems With Tonal Components On Human Performance And Perception (1322-Rp), Erica E. Ryherd, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This study investigated the effects of noise from building mechanical systems with tonal components on human task performance and perception. Six different noise conditions based on in-situ measurements were reproduced in an office-like setting; all were set to approximately the same sound level (47 dBA) but could have one particular tonal frequency (120 Hz, 235 Hz, or 595 Hz) at one of two tonal prominence ratios (5 or 9). Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately 1 hour to each noise condition. Results show that the noise …

Ab-10-C037: Effects Of Noise From Building Mechanical Systems On Elementary School Student Achievement, Lauren M. Ronsse, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project seeks to determine what relationship, if any, exists betweenbackground noise levels in elementary classrooms due to the building mechanicalsystems and student performance on achievement tests. Previous research inclassroom acoustics has clearly identified that lower background noise levelsresult in higher speech intelligibility which is crucial for the learning process;however, there is a lack of data correlating lower noise levels to improved studentachievement scores. For this study, background noise level measurements were madein 14 elementary schools in a public school system in Council Bluffs, Iowa, USA.The measurements were made in unoccupied classrooms with the central buildingmechanical systems activated. Second and …