Mechanical Engineering Commons^™

The Solution Of Hypersingular Integral Equations With Applications In Acoustics And Fracture Mechanics, Richard S. St. John

Mathematics & Statistics Theses & Dissertations

The numerical solution of two classes of hypersingular integral equations is addressed. Both classes are integral equations of the first kind, and are hypersingular due to a kernel containing a Hadamard singularity. The convergence of a Galerkin method and a collocation method is discussed and computationally efficient algorithms are developed for each class of hypersingular integral equation.

Interest in these classes of hypersingular integral equations is due to their occurrence in many physical applications. In particular, investigations into the scattering of acoustic waves by moving objects and the study of dynamic Griffith crack problems has necessitated a computationally efficient technique …

Material Evaluation By Pulsed Diode Laser Optoacoustics, Xiaodong Xu

Electrical & Computer Engineering Theses & Dissertations

Pulsed diode laser optoacoustic diagnostics were carried out to characterize solid sample materials. The apparatus developed is compact, portable, cost-effective and therefore very promising for both industrial as well as laboratory applications. To our knowledge, this is the first time that optoacoustic characterization and measurement have been performed with a diode laser. The method was successfully applied to measure the thickness of a multilayer structure non-intrusively. Internal cracks of the material were detected by this technique.

A theory for optoacoustic signal generation, propagation and detection is given. A numerical analysis technique is developed to solve for the expected signal. In …

High-Order Finite-Difference Schemes And Their Application To Computational Acoustics, Joe Leo Manthey

Mathematics & Statistics Theses & Dissertations

The primary focus of this study is upon the numerical stability of high-order finite-difference schemes and their application to duct acoustics. Since acoustic waves are known to be non-dissipative and non-dispersive, high-order schemes are favored for their low dissipation and low dispersion relative to the low-order schemes. The primary obstacle to the the development of explicit high-order finite-difference schemes is the construction of boundary closures which simultaneously maintain the formal order of accuracy and the numerical stability of the overall scheme. In this thesis a hybrid seven-point, fourth-order stencil for computing spatial derivatives is presented and the time stability is …

Microelectromechanical Isolation Of Acoustic Wave Resonators, James R. Reid Jr.

Theses and Dissertations

Microelectromechainical systems (MEMS) is a rapidly expanding field of research into the design and fabrication of actuated mechanical systems on the order of a few micrometers to a few millimeters. MEMS potentially offers new methods to solve a variety of engineering problems. A large variety of MEMS systems including flip-up platforms, scanning micromirrors, and rotating micromirrors are developed to demonstrate the types of MEMS that can be fabricated. The potential of MEMS for reducing the vibration sensitivity of surface acoustic wave and surface transverse wave resonators is then evaluated. A micromachined vibration isolation system is designed and modeled. A fabrication …

The Modeling Of Structural-Acoustic Interaction Using Coupled Fe/Be Method And Control Of Interior Acoustic Pressure Using Piezoelectric Actuators, Yucheng Shi

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled finite element (FE) and boundary element (BE) approach is presented to model full coupled structural/acoustic/piezoelectric systems. The dual reciprocity boundary element method is used so that the natural frequencies and mode shapes of the coupled system can be obtained, and to extend this approach to time dependent problems. The boundary element method is applied to interior acoustic domains, and the results are very accurate when compared with limited exact solutions. Structural--acoustic problems are then analyzed with the coupled finite element/boundary element method, where the finite element method models the structural domain and the boundary element method models the …

Analysis Of Random Structure-Acoustic Interaction Problems Using Coupled Boundary Element And Finite Element Methods, Carl S. Pates Iii

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled boundary element(BEM)-finite element(FEM) approach is presented to accurately model structure-acoustic interaction systems. The boundary element method is first applied to interior, two and three-dimensional acoustic domains with complex geometry configurations. Boundary element results are very accurate when compared with limited exact solutions.

Structure-interaction problems are then analyzed with the coupled FEM-BEM method, where the finite element method models the structure and the boundary element method models the interior acoustic domain. The coupled analysis is compared with exact and experimental results for a simplistic model. Composite panels are analyzed and compared with isotropic results. The coupled method is then …

Binaural Room Simulation, Brian A. Smith

Theses and Dissertations

Research in binaural and spatial hearing is of particular interest to the Air Force. Applications in cockpit communication, target recognition, and aircraft navigation are being explored. This thesis examines human auditory localization cues and develops a mathematical model for the transfer function of a sound signal traveling from an isotropic point source through a rectangular room to both ears of a listener. Using this model as a guide, non-head coupled binaural sound signals are generated in a binaural room simulation. Reflection and attenuation cues included in the computer generated signals are varied in order to determine which cues enhance the …

Acoustic Correlates Of Vowel Perception As Determined From Synthesis Experiments With Multi-Tone Stimuli, Zhongjiang Zhang

Electrical & Computer Engineering Theses & Dissertations

An essential requirement of speech signal processing is to extract information (features or parameters) from the speech signal which encode the information carried by the signal. The objective of this thesis work was to examine and evaluate two feature sets as acoustic correlates for vowel perception. They are formants and DCTCs. Formants are the frequencies of spectral peaks of the speech signal. DCTCs are the Discrete Cosine Transform Coefficients of the magnitude spectrum and are thus features which encode the global spectral shape of speech signal.

There are different opinions regarding which feature set is a more accurate representation for …

Study Of Single-Fiber Fiber Optic Lever Microphone, Trung Duc Nguyen

Electrical & Computer Engineering Theses & Dissertations

Fiber optic sensors are widely used in today's technological applications, providing many advantages that conventional sensors lack. In particular, there is a demand in hypersonic applications to develop microphones to measure acoustic pressure that performs in high temperature and noisy surroundings. This thesis analyzes fiber optic lever microphones (FOLM), since they perform at high temperatures. An FOLM system is an intensity modulated sensor, which is simple to implement and is small in size. Two models of the FOLM have been fabricated and calibrated. The first model uses a seven-element fiber array while the second uses a single-fiber to transmit and …

Effect Of Operating Conditions On Gearbox Noise, Fred B. Oswald, James J. Zakrajsek, Dennis P. Townsend, William Atherton, Hsiang Hsi Lin

Mechanical Engineering Faculty Publications

Low-contact-ratio spur gears were tested in the NASA gear noise rig to study the noise radiated from the top of the gearbox. The measured sound power from the gearbox top was obtained from a near-field acoustic intensity scan taken at 63 nodes just above the surface. The sound power was measured at a matrix of 45 operating speeds and torque levels. Results are presented in the form of a spectral speed map and as plots of sound power versus torque (at constant speed) and as sound power versus speed (at constant torque) Because of the presence of vibration modes, operating …

Comparison Of Analysis And Experiment For Gearbox Noise, Fred B. Oswald, A. F. Seybert, T. W. Wu, William J. Atherton

Mechanical Engineering Faculty Publications

Low-contact-ratio spur gears were tested in the NASA gearnoise rig to study the noise radiated from the top of the gearbox. Experimental results were compared with a NASA acoustics code to validate the code for predicting transmission noise. The analytical code is based on the boundary element method (BEM) which models the gearbox top as a plate in an infinite baffle. Narrow-band vibration spectra measured at 63 nodes on the gearbox top were used to produce input data for the BEM model. The BEM code predicted the total sound power based on this measured vibration. The measured sound power was …

Second Coefficient Of Viscosity In Air, Robert L. Ash, Allan J. Zuckerwar, Zhonquan Zheng

Mechanical & Aerospace Engineering Faculty Publications

Acoustic attenuation measurements in air were analyzed in order to estimate the second coefficient of viscosity. Data over a temperature range of 11 C to 50 C and at relative humidities between 6 percent and 91 percent were used. This analysis showed that the second coefficient of viscosity varied between 1900 and 20,000 times larger than the dynamic or first coefficient of viscosity over the temperature and humidity range of the data. In addition, the data showed that the molecular relaxation effects, which are responsible for the magnitude of the second coefficient of viscosity, place severe limits on the use …

Measurement Of Thermal Noise In Condenser Microphones In A Vacuum-Isolation Vessel, Kim Chi Thi Ngo

Electrical & Computer Engineering Theses & Dissertations

The electrical noise generated by thermal agitation of the air molecules impinging upon the membrane of a condenser microphone and from its associated preamplifier has been studied analytically and experimentally over a wide bandwidth. These background noise levels constitute one of the most important specifications of a microphone for they determine the lowest sound pressure that can be detected. Therefore, a new method for measuring the thermal agitation noise within a bandwidth of 1-25600 Hz has been developed. The theoretical and experimental measurements of thermal agitation noise in a condenser microphone by enclosing the microphone in a vessel which is …

Automated Acoustic Intensity Measurements And The Effect Of Gear Tooth Profile On Noise, William J. Atherton, Adam Pintz, David G. Lewicki

Mechanical Engineering Faculty Publications

Acoustic intensity measurements were made at NASA Lewis Research Center on a spur gear test apparatus. The measurements were obtained with the Robotic Acoustic Intensity Measurement System developed by Cleveland State University. This system provided dense spatial positioning, and was calibrated against a high quality acoustic intensity system. The measured gear noise compared gearsets having two different tooth profiles. The tests evaluated the sound field of the different gears for two speeds and three loads. The experimental results showed that gear tooth profile had a major effect on measured noise. Load and speed were found to have an effect on …

Effect Of Center Of Gravity Location On Optimum Performance Of Random Vibratory Vehicle Suspension, Daniel Mahar

Theses

This study provides the analysis for the optimal design of a conventional vehicle suspension system, consisting of a sprung mass (vehicle body) and two unsprung masses (wheel frame), accentuated by the implementation of a damped absorber to the unsprung masses. Further, the effect of the c.g. (center of gravity) location of the vehicle body is investigated. A two dimensional, four degrees of freedom linear model is chosen. Randomly profiled terrain is assumed to impart hyperbolically distributed stationary vertical random displacements to the front and rear wheels. For generalization, nondimensional design parameters are selected. Criteria for optimization include the tire-terrain normal …

Underwater Acoustic Wavefront Phase Fluctuations, George L. Vojtech Jr.

OES Theses and Dissertations

In conventional underwater acoustics sound propagation is generally modeled and applied as a coherent or incoherent process. This paper addresses a relatively new theory, that of a range driven increasingly incoherent ray propagation through a real ocean environment, Possible mechanisms are discussed and experimental data presented to reinforce the theory.

Sound Absorption In N2-H2O Gas Mixtures At Elevated Temperatures, Roger W. Meredith

Physics Theses & Dissertations

Sound absorption measurements were conducted in N₂ -H₂O gas mixtures at 297, 343, and 387 Kelvin to determine the location of the vibrational relaxation peak of nitrogen on the frequency/pressure, (f/P), axis as a function of humidity and temperature. At low humidities the best fit of the data is to a linear relationship between (f/P)_max and humidity (h) yields a slope of 1 .84 X 10⁴ Hz/ atm mole fraction at all three temperatures. The slope is the same as that reported by Zuckerwar and Griffin (2.00 X 10⁴ Hz/atm mole fraction) but is …

Finite Element Model Of A Timoshenko Beam With Structural Damping, Louis Ablen Roussos

Mechanical & Aerospace Engineering Theses & Dissertations

A numerical integration technique, a modified version of the Newmark method, is applied to transient motion problems of systems with mass, stiffness, and small nonlinear damping. The nonlinearity is cast as a pseudo-force to avoid repeated recalculation and decomposition of the effective stiffness matrix; thus, the solution technique is dubbed the "pseudo-force Newmark method." Comparisons with exact and perturbation solutions in single-degree-of-freedom problems and with a Gear-method numerical solution in a cantilevered Timoshenko beam finite element problem show the solution technique to be efficient, accurate, and, thus, feasible provided the nonlinear damping is small. As a preliminary step into the …

The Design And Analysis Of A Unique Broadband Underwater Acoustic Source, Allan Mark Young

Retrospective Theses and Dissertations

Requirements exist for a unique type of underwater acoustic source. The transducer is in the form of a linear array of discrete elements and is required to have a constants transmitting voltage response and carefully controlled directivity characteristics over a two octave bandwidth. A generalized model of a linear array of cylindrical piezoelectric ceramic acoustic radiators is developed and applied to the design of a prototype which operates over approximately one half of the required bandwidth. The prototype transducer was built and the measured results are compared with those predicted by the model. Recommendations are made for improving the performance …

Propagation Of Ground Vibration: A Review, Timothy G. Gutowski, Clive L. Dym

All HMC Faculty Publications and Research

A review of the current state of the art of ground vibration propagation is presented herein. First the theoretical models of vibration attenuation are reviewed and then measurement techniques are discussed. Finally, measurement and theory are combined into predictive models, whose validity is discussed.

Farm Safety, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Careful investigation has been made into the causes of tractors overturning.

The most common types of accident are set out below, with advice on how to avoid them.

Making Beats Visible, Carl J. Ulrich

Journal of the Minnesota Academy of Science

No abstract provided.