Materials Science and Engineering Commons^™

The Electrochemical Behavior And Deposited Mechanism Of Zn-Ni Alloy Codeposition, Jixun Wu, Yongqin Liu, Huimin Meng

Journal of Electrochemistry

The electrochemical behavior of Zn-Ni alloy codeposition and concomitant hydrogen evolution have been studied in the chloride ammonia solution through the d-c electroplating method. Under the condition of the applied cathodic current density of 2A/dm² , the AC impedance spectra have been measured. An equivalent circuit has been presented for the impedance study on the alloy codeposition.

Preparation Of Pbo2/Ti Plate Electrode, Zhigang Shao, Baolian Yi, Xinge Zhang, Enjun Zhang

Journal of Electrochemistry

The perchlorate was made up of a lead dioxide plate elcetrode and an oxygen cathode. By measuring the flow capacity of cell gas in the cell, and by means of CV, SEM, XRD, the performances of the lead dioxide plate electrodes are evaluated. The influence of changes in the concentrations of electroplating solutions (F, HNO₃, Bi³⁺, Ni²⁺, Fe³⁺ and surface active agent) is investigated. The results show that the concentrations of Fe³⁺ in the solutions must be lower 0.01 g/L, and the concentrations of HNO₃ in the solutions are about 20 …

Electrorheological Characters Of Polyaniline Suspensions, Guangyao Su, Deshu Gao, Changqing Zhang

Journal of Electrochemistry

Polyaniline (PAn) as the dispersive particles and insulating oil as the dispersive medium, the electrorheological fluid (ERF) is constituted. Relations between the factors of electric field strength (E), temperature (T) and the static yield stress (τ_S), current density (i) of ERF are investigated. The results show that the changes of τ_S and i with electric field intensity have emerged in the exponential relation, i.e, τ_S∝E^0.7, i∝E^2.18. Otherwise, when exert a constant voltage on ERF, owing to the polarization, the absorption of medium of ERF have taken place. Therefore, the attenuation rate …

Study On The Diffusion Of Electroactive Molecules In Polymer Electrolyte By Microelectrode Voltammetry, Liming Ding, Shaojun Dong, Erkang Wang

Journal of Electrochemistry

The ten years study on the diffusion of electroactive molecules in polymer electrolyte by microelectrode voltammetry was reviewed by considering the development background of polymer electrolyte materials. The classification, fabrication, applications and electrochemical measurements of microelectrode were introduced concisely. The several important factors influencing the diffusion of electroactive molecules were stressed. In the final part of this paper, some new reports on the diffusion of labeled molecules were introduced.

Behavior Of Copper In Hydrogen Storage Alloy Microencapsulated By Copper, Dawei Zhang, Huatang Yuan, Huabin Yang, Zuoxiang Zhou, Yunshi Zhang

Journal of Electrochemistry

Negative electrode made from Cu microencapsulated hydrogen storage alloy was studied by using cyclic voltammetry method. The results showed that copper as a coating material was of a certain stability in 5 mol/L KOH solution within the range of charge and discharge voltage. But when expanding the sweep voltage, the CV curve showed a pair of distinct oxidation reduction current peaks of Cu₂O formation at E = -0.3 V and Cu₂O reduction at E =-0.6 V. With charging discharging cycles, copper is liable to be oxidized to Cu₂O and further oxidized into CuO_{2 …}

Corrosion Behaviour Of Copper Covered With Ion Selective Phenolic Coatings By Eis, Zhoucheng Wang, Yingzhou Zhang, Shaomin Zhou

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS) technique was employed to study the corrosion behaviour of copper painted with the anion selective, cation selective and bipolar phenolic coatings in 3% NaCl solution. From the impedance spectrum characteristics, the models of equivalent circuit for these different coating systems were established, and the methods for the analysis of experimental impedance diagrams in terms of coating and interface properties were discussed. The research results show that the composition and structure of ion selective coatings have significant influence on corrosion behaviour of copper. The bipolar coating consisting of an anion selective inner layer and a cation selective outer …

The Electrode Process Of Some Organic Dyes Studied By Spectroelectrochemical Technique In Situ, Yinxuan Tang, Hangsheng Yang, Baoen Shen

Journal of Electrochemistry

Spectroelectrochemistry especially with in situ measurement in a cell provides a very useful mthodology for measuring the parameters of electrode process. In this paper, we report the determination of formal potentials, the number of electron transfer, the diffusion coefficient, the heterogeneous electron transfer rate constant and the transfer coefficient of some organic dyes (Methyelene blue, Neutral red, Indigo carmine) using spectroelectro chemical technique in situ.

Orientation Relationships In The System Nb-Nbcr2, P. G. Kotula, Katherine C. Chen, Dan J. Thoma, F. Chu, T. E. Mitchell

Materials Engineering

No abstract provided.

39th Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Preliminary program and registration information for the 39th annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-sponsored by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 3-7, 1997.

Fabrication, Structure, Properties And Workability Of Al 2024/Sic Particulate Composites, Renee Naim Aziz

Archived Theses and Dissertations

[abstract not provided]

Fabrication, Structure, Properties And Workability Of Al 2024/Sic Particulate Composites, Renee Naim Aziz

Archived Theses and Dissertations

No abstract provided.

Experimental Investigation Of Nonlinear Dynamics In Single Mode Semiconductor Laser Diodes With Phase Conjugate Feedback, Gordon T. Hengst

Theses and Dissertations

The semiconductor laser diode offers a unique system to investigate nonlinear dynamics when optical feedback is applied. Although there is extensive research of laser diodes with optical feedback from normal dielectric mirrors, very little has been done experimentally to analyze the effects of degenerate phase conjugate feedback from a BaTiO₃ crystal. This research experimentally investigated the dynamics of a single-mode laser diode with weak phase conjugate feedback using both the self-pumped and double phase conjugate geometries. The experimental results validated a mathematical model which numerically evaluates the Lang-Kobayahsi coupled differential equations. The model simulated the nonlinear behavior of a …

Gallium Desorption Behavior At Algaas/Gaas Heterointerfaces During High-Temperature Molecular Beam Epitaxy, K. Mahalingam, D. L. Dorsey, K. R. Evans, Rama Venkat

Electrical & Computer Engineering Faculty Research

A Monte Carlo simulation study is performed to investigate the Ga desorption behavior during AlGaAs-on-GaAs heterointerface formation by molecular beam epitaxy. The transients in the Ga desorption rate upon opening the Al shutter are shown to be associated with the concurrent reduction in the V/III flux ratio. Monte Carlo simulations employing a constant V/III flux ratio yield a “steplike” variation in the Ga desorption rate with the resulting interfaces closer in abruptness to the ideal AlGaAs-on-GaAs interface. Further details on the stoichiometry of the interface and its relationship with predicted Ga desorption profiles is presented.

Strip Casting With Fluxing Agent Applied To Casting Roll, Robert S. Williams, Ronald J. O'Malley, Richard C. Sussman

Materials Science and Engineering Faculty Research & Creative Works

A strip caster (10) for producing a continuous strip (24) includes a tundish (12) for containing a melt (14), a pair of horizontally disposed water cooled casting rolls (22) and devices (29) for electrostatically coating the outer peripheral chill surfaces (44) of the casting rolls with a powder flux material (56). The casting rolls are juxtaposed relative to one another for forming a pouting basin (18) for receiving the melt through a teeming tube (16) thereby establishing a meniscus (20) between the rolls for forming the strip. The melt is protected from the outside air by a non-oxidizing gas passed …

Fabrication And Mechanical Properties Of Aluminium Composite Duplex Alloys By Semisolid Forming, Merhane Mohamed Kamel

Archived Theses and Dissertations

No abstract provided.

Gfrp External Strengthening Of Structural Concrete, Tarek Mohamed Nabil Fathy Rizk

Archived Theses and Dissertations

No abstract provided.

A Piezoresistive Metal Thin Film Tilt Sensor, Todd Allan Lindley

Electrical & Computer Engineering Theses & Dissertations

Thin film strain gauges have many applications as transducers for monitoring pressure, vibration, and acceleration. In this thesis, a simple system, consisting of a Nichrome thin film strain gauge deposited on a glass substrate, is investigated in detail. Finite element analysis is used to model the expected sensor behavior. The substrate is shaped to exhibit a constant strain distribution, and is set up in a cantilever beam configuration. R. F. sputtering is used to deposit the Nichrome film, and the resistor pattern is transferred via photolithography. The gravitational force on a mass attached to the free end of the sensor …

Dyna3d Simulations Of Low-Speed Impact Response Of Laminated Composite Panels, Kenneth William Barlow

Mechanical & Aerospace Engineering Theses & Dissertations

Low-speed impact response of laminated composite panels is simulated without material damage using the DYNA3D finite element analysis code. The DYNA3D code is a nonlinear transient dynamics simulation tool with a contact algorithm for impact. By gaining a more comprehensive understanding of this dynamic impact event, this work is meant to contribute to improving designs for damage tolerance and residual strength by providing modeling and analysis guidelines for the analyst.

Structural modeling of the laminate and the impact event are found to be important factors for the analyst to consider. Since DYNA3D uses an explicit formulation, problem size is constrained …

Chromatographic Separation Apparatus, Lynn S. Penn, Donna L. Scott, Howard H. Weetall, Anne L. Plant, Marion F. Mccurley, Scott A. Glazier

Chemical and Materials Engineering Faculty Patents

An apparatus for the monitoring of a column chromatography separation process includes a segmented column with a seal positioned at the joint defined by the segments of the column. A connector is provided for connecting the segments of the column together. The apparatus further includes a sensor for monitoring an analyte in an eluant within a separation zone of the column. The sensor includes a mesh grid made of optical fibers or metal wires which is placed so as to extend through the separation zone of the column. The metal wires or optical fibers extend through the seal of the …

Aluminum Nitride-Compatible Thick-Film Binder Glass And Thick-Film Paste Composition, Douglas M. Mattox

Materials Science and Engineering Faculty Research & Creative Works

Mixed alkaline earth boroaluminate glasses comprising BaO combined with at least one of CaO, SrO and MgO. The glasses are useful as frit binders in aluminum nitride- compatible, thick-film paste compositions used in thick-film printing of hybrid microelectronic circuits on aluminum nitride substrates.

Recovery Of Scrap Tire Rubber Waste, Dalia Adel Habib Nakhla

Archived Theses and Dissertations

No abstract provided.

Recycling Pet (Polyethylene Terephthalate) Soda Bottle Wastes To Produce Carpet Fibers, Sherry Halim Yacoub

Archived Theses and Dissertations

The problem of plastics wastes has increased tremendously since the use of plastics increased in more than one application increasing in return the amount of wastes. The possible ways for handling these wastes include landfilling, reusing through chemical recycling techniques, mechanical recycling and reprocessing into a new product, or finally incineration to get energy out of it . In Egypt, recycling takes place for a number of plastic items, but no recycling efforts are yet established for the PET plastic bottles used for soda beverages. It is the concern of this thesis therefore, to find a solution for these unused …

Thickness Effects On A Cracked Aluminum Plate With Composite Patch Repair, Joel J. Schubbe

Theses and Dissertations

Post-repair fatigue crack growth was investigated in 3.175, 4.826, and 6.35 mm thick aluminum panels asymmetrically repaired with boron/epoxy composite patches bonded to the plates with FM73 sheet adhesive. Patches were uniaxial with patch to panel stiffness ratios ranging from 0.46 to 1.3. Experimental fatigue tests were carried out at 120 MPa, R=0.1, and 10 Hz (sinusoidal) to measure patched and unpatched face crack lengths, center crack opening displacements, and selected strains. Crack growth data was acquired using optical, eddy current, and post-test analysis methods. Crack growth rates were calculated using the incremental polynomial method. A three-layer Mindlin plate finite …

Studies Of Electrocatalytic Properties Of Electrode Of Dispersed Pt On Gc Support In Ethylene Glycol Oxidation, Shengpei Chen, Shigang Sun, Zhiyou Zhou, Shuanjing Hong

Journal of Electrochemistry

The structures and properties of electrocatalyst of dispersed Plutinum (Pt) on glassy carbon (GC) support under different conditions were studied using cyclic voltammetry, potential step technique, X-ray diffraction (XRD) and scanning Electron microscopy (SEM). The results indicated that after having been treated in high temperature,the dispersed Pt on GC support was recrystallised with preferented orientation, and the grain of Pt microcrystal become large and regular. It was illustrated that the dispersed Pt on GC support after high temperature treatment exhibited better stability and high activity for ethylene glycol oxidation.

Polymer Electrolyte Fuel Cell Powered Vehicles, Naichao Li, Baolian Yi

Journal of Electrochemistry

The background, status and commercialization prospect of polymer electrolyte fuel cell vehicles are surveyed in this paper. The technology of this cell and system used in vehicles is discussed.

Electrochemical Behavior Of Superoxide Dismutase On Gold Minigrid With Thin Layer Cell, Xiaqin Wu, Qian Liu, Bin Xu, Xiaoyun Men, Zongrang Zhang

Journal of Electrochemistry

The electrochemical behavior of superoxide dismutase (Cu, Zn-SOD) was investigated on gold wire electrode and gold minigrid with thin layer cell by cyclic voltammetry. A quasi reversible redox wave of SOD has obtained on gold minigrid thin layer electrode, but only oxidation peak has observed on gold wire electrode. The electrochemical reaction parameters, such as the formal potential E^0′, diffusion coefficient D and standard rate constant k^0′ were estimated.

Electrodeposition Of Amorphous Fe-Cr Alloy Coating, Danhong Cheng, Weiyi Xu, Yiqin Qin, Liqun Hua, Zhongyan Zhang

Journal of Electrochemistry

The amorphous Fe-Cr alloy coatings were obtained by controlling the composition of bath operation conditions. It was found that the pH value, the current density and the content of chromium in Fe-Cr alloy coatings effect the amorphous structure of the coatings. The result of anodic polarization shows that the corrosion resistance of the amorphous coatings in acidic media is higher than the corrosion resistance of the crystal ones.

Studies On Electrodeposition Of Rare Earth Metals And Their Alloys In Molten Salts, Qiqin Yang

Journal of Electrochemistry

The cyclic voltammetry, convolution voltammetry, potentiostatic electrolysis and open circuit potential time curve after electrolysis, current time curve at potential step, potential time curve at current step, X-ray diffraction, EDAX, electron probe microanalysis were used to investigate the electrode processes of the reduction of rare earth ions on inert electrodes and alloying electrodes in molten chlorides and fluorides. The free energies of formation for the intermetallic compounds, the diffusion coefficients of rare earth ions in the melt, the diffusion coefficients of rare earth atoms in the alloy phases were determined. The alloys of rare earth with iron, cobalt, nickel, copper, …

Surface Modification Of Molten Carbonate Fuel Cell Anode, Baizeng Fang, Xinyu Liu, Xindong Wang, Shuzhen Duan

Journal of Electrochemistry

In this study, the anode material of molten carbonate fuel cell was modified by the deposition of niobium on nickel surface. The results of polarization experiments reveal that the corrosion resistant properties as well as electrocatalytic activity have been improved greatly.

Study Of Electrodepositing Bright Tin Cobalt Zinc Alloy From Weak Acid Solution, Zhengzhong Zuo, Runxiang Hou, Shaochun Xia

Journal of Electrochemistry

A new process of electrodeposting bright Tin Cobalt Zinc alloy from weak acid solution is proposed in this paper. The solution compositions and operating conditions are Na₃C₆H₅O₇·2H₂O 100～150, Na₂EDTA·2H₂O 20～30, SnCl₂·2H₂O 15～20, CoSO₄·72H₂O 25～35, ZnCl₂ 15～20 g·L^-1; stabilizer WDZ-160～100, brightener WDZ-215～20 mL·L^-1; pH=4～6, D_K=0.5～5.0 A·dm^-2, T=5～35 ℃. A bright Sn-Co-Zn deposit having Co about 0.5～3.5% and Zn about 1～10% is produced. The effects of bath compositions on Co or …