Materials Science and Engineering Commons^™

Formation Of A Metastable Bcc Solid Solution And Decomposition To A C15 Laves Phase In Melt-Spun Crnb10Ti10, Katherine C. Chen, P. G. Kotula, F. Chu, Dan J. Thoma

Materials Engineering

A metastable, disordered bcc phase has been formed from the melt in a Cr-rich alloy of the Nb-Cr-Ti system, where large volume fractions of the Laves phase would develop under equilibrium solidification conditions. X-ray diffraction (XRD) studies and lattice constant determinations confirm that the melt-spun ribbons contain a bcc phase beyond its terminal solid solution limits. Solidification pathways are proposed based upon metastable and equilibrium phase diagrams. Microstructures have been studied using optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Cross-sectional TEM reveals tiny, dispersed Laves phase precipitates within the metastable bcc grains near the chill (wheel) …

Pseudogap And Incommensurate Magnetic Fluctuations In Yba2cu3o6.6, Pengcheng Dai, Herbert A. Mook, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Unpolarized inelastic neutron scattering is used to study the temperature and wave vector dependence of the dynamical magnetic susceptibility X"(q,w) of a well-characterized single-crystal YBa₂Cu₃O_6.6 (Tc = 62.7 K). We find that a pseudogap opens in the spin-fluctuation spectrum at temperatures well above T_c. We speculate that the appearance of the low-frequency incommensurate fluctuations is associated with the opening of the pseudogap. To within the error of the measurements, a gap in the spin-fluctuation spectrum is found in the superconducting state.

Absolute Measurements Of The High-Frequency Magnetic Dynamics In Hihg-Tc Superconductors, Stephen M. Hayden, Gabriel Aeppli, Pengcheng Dai, Herbert A. Mook, Toby G. Perring, S-W Cheong, Zachary Fisk, Fatih Dogan, Thomas E. Mason

Materials Science and Engineering Faculty Research & Creative Works

We review recent measurements of the high-frequency dynamic magnetic susceptibility in the high-T~ superconducting systems La_2-xSr_xCuO₄ and YBa₂Cu₃O_6+x. Experiments were performed using the chopper spectrometers HET and MARI at the ISIS spallation source. We have placed our measurements on an absolute intensity scale; this allows systematic trends to be seen and comparisons with theory to be made. We find that the insulating S = ½ antiferromagnetic parent compounds show a dramatic renormalization of the spin wave intensity. The effect of doping on the response is to cause broadenings in …

Pseudogap And Incommensurate Magnetic Fluctuations In Yba2cu3o6.6, Pengcheng Dai, Herbert A. Mook, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Unpolarized inelastic neutron scattering is used to study the temperature and wave vector dependence of the dynamical magnetic susceptibility, X"(q, w), of a well-characterized single-crystal YBa2Cu3O6.6 (Tc = 62.7 K). We find that a pseudo gap opens in the spin-fluctuation spectrum at temperatures well above Tc. We speculate that the appearance of the low-frequency incommensurate fluctuations is associated with the opening of the pseudo gap. To within the error of the measurements, a gap in the spin-fluctuation spectrum is found in the superconducting state.

Recycling Of Composite Material, Shereen Hassanein El Attawi

Archived Theses and Dissertations

No abstract provided.

Investigation Of Two-Phase Air Water Flow Using Annubar, Ehab Fouad Shoukry

Archived Theses and Dissertations

No abstract provided.

Measurement Of Ultrafast Carrier Recombination Dynamics In Mid-Infrared Semiconductor Laser Material, William T. Cooley

Theses and Dissertations

Shockley-Read-Hall, radiative, and Auger recombination rates in mid-infrared laser structures are measured and reported using time resolved photoluminescence (TRPL) frequency upconversion. The mid-IR lasers studied were actual InAsSb/InAlAsSb multiple-quantum-well (MQW) diode lasers emitting near 3.3 micrometers which were previously characterized for laser performance. This effort extends the initial studies and reports on the carrier recombination dynamics. Shockley-Read-Hall, radiative and Auger recombination rates at low temperature (77 K) were measured and found to be A_SRH ≈ 10 x 10⁷sec^-1, B_rad ≈ 2 x 10^-10 cm³sec^-1 and C_Auger < 10^-29 cm^{6 …}

Study On The Oxygen Electrodes Of Alkaline Fuel Cells Effect Of Dopant On The Activity Of Ag/C Catalyst, Jiawei Teng, Linhua Jin, Luncheng Tang

Journal of Electrochemistry

A new kind of nonnoble catalyst for the oxygen electrodes of Alkaline Fuel Cells was investigated. The AgNiBiHg/C catalyst, which was prepared by chemical reduction, was active for the cathodic reduction of oxygen in alkaline fuel cells. It was found that the catalytic activity was improved by adding Ni, Bi, Hg to Ag/C catalyst, and the maximum activity was observed at Ag50%-Ni2%-Bi3%-Hg3%-C42%(wt%). XRD inconjunction with SEM indicated that the crystalline silver turned into amorphous in the presence of doping agents and the grain size of silver was reduced. No dramatic deactivation of the catalyst occured after 5200 hours of service.

Development Of A New Type Ni-S Evolution Hydrogen Electrode For Water Electrolysis, Xiaoyou Yuan, Jinyu Wang

Journal of Electrochemistry

A new type evolution hydrogen electrode NiS(N) has been made from nickel plating electrode in NiSO₄CS(NH₂)₂ bath by electrodeposition. It is analyzed by SEM and X-ray energy spectrum. The NiS(N) electrode is different from the NiS(O) electrode (which is used in plant at present time) in surface metallograph configuration and surfer content. The results of measurement polarization curves and water electrolysis 480 hours at 5 000 A·m^-2 show that the evolution hydrogen overpotential of NiS(N) electrode is decreased at least 160 mV relative to NiS(O) electrode and the stablisum of NiS(N) electrode is better …

Preparation Of High Rate Discharge Foamed Ni-Cd Battery, Yuming Wang, Jinsheng Chen

Journal of Electrochemistry

A novel device of SC type foamed NiCd battery is presented, in which, the innerresistance of battery is appeared to be reduced, and the electrode performance is gained to very improved, and so, this battery can be suited to using of the powerdrive pistol drill.

Advances In Solid Polymer Electrolytes, Liming Ding, Shaojun Dong, Erkang Wang

Journal of Electrochemistry

The formation, classification, applications and ion-transport mechanism studies of solid polymer electrolytes were reviewed. While the recent SPE reports on the preparation of novel materials, the full structure determinations of PEO/salt complexes, the exploration of ion-transport mechanism and the applications in electrochemical devices being introduced, some prospects on the future SPE research were suggested.

Molten Carbonate Fuel Cell Materials And Technology, Naichao Li, Baolian Yi

Journal of Electrochemistry

Molten Carbonate Fuel Cell materials are reviewed, and the technology of Molten Carbonate Fuel Cell are discussed.

The Effect Of Bismuth On Microstructure Of The Cathodic Copper Deposition Of Copper Electrorefining, Daorong Lu, Jianxing Lin

Journal of Electrochemistry

The electrocrystal formation, crystal orientation and the chemical composition of the cathodic copper deposition in the presence of Bi³⁺ in the electrolyte of acidified CuSO₄ are studies by scanning electron microscopy, X-ray diffraction, atomic absorption and EDAM. The results indicate that the Bi could′t deposit on cathode when copper electrolysed at common current density i=200 A·mol/L^-2 and t=60 ℃. Bi³⁺ scarcely effected on the crystal orientation (220) of copper deposition. High concentration Bi³⁺ in the electrolyte promoted (220) growth and inhibited the other crystal orientation growth. Bi³⁺ effected on electrocrystal formation and the cell …

Mechanism Of Electrodeposition Of Cu/Co Multilayer Thin Films, Jiangyun Xue, Jixun Wu, Dejun Yang

Journal of Electrochemistry

The mechanism of electrodeposition of Cu/Co multilayer thin films has been studied by means of potentodynamic sweep, cyclic voltammetry sweep and AC impendance. The results indicated that the copper deposition is mass transfer controlled process and the cobalt deposition is related to the absorbed intermediate species such as Co(OH)_ads. The cobalt ions first form Co(OH)_ads, then was deoxygenated to cobalt on the electrode surface.

Study On Perchlorate Produced By Electrolysis With Oxygen Cathode, Zhigang Shao, Baolian Yi, Naichao Li, Ming Han

Journal of Electrochemistry

A new method of measuring the flow capacity of cell gas in the perchlorate cell process equipped with an oxygen cathode is applided to investigate the influence of changes in the concentration of solution (chloride, chlorate, perchlorate and metal ion) and changes in the operation parameters (current density, temperature and pH) on perchlorate current efficiency. The main abstacle that the oxygen cathode is used in the perchlorate cell process is put forward and a method is provided to resolve it.

The Effect Of Solution Composition On The Corrosion Behavior Of Electrodeposited Zinc Powder, Qingwen Li, Qin Yang, Xi Xia

Journal of Electrochemistry

Zinc powder as a widely anode material can be electrowon from ZnCl₂ or ZnO+KOH media. The properties of zinc powder are likely to be modified with electrolytic conditions such as the composition of bath solution, electrolysis manner, current density and additives etc.. In this paper, we have discussed the effect of the compositions of bath solution on the microstructure and corrosion resistance of zinc powder.

The Activity Of Alloy Cu-Ni Electrode In Electroreduction Of Aromatic Nitro-Compounds, Chunan Ma, Shaoping Tong, Xiaojun Cheng, Hui Wang

Journal of Electrochemistry

Cu-Ni alloy on the basis of copper at different ratio Cu/Ni are prepared by codepostion. The cathode activtiy of film are studied by steady-state polarization for electroreduction nitro-benzene (NB) and 1,5-dinitroanthraquinone (1,5-DNA) to p-aminophenol and 1,5-diamino-4,8-dihydroanthraquinone respectly. The results show that the alloy cathodes at different ratio Cu/Ni have different exchange current density (i^o) and apparent activition energy (E_A). The alloy (CN-30) has maximal i^o and minimal E_A by codeposition at the following conditions: electrolyte: 0.05 mol/L CuSO₄·5H₂O+0.6 mol/L NiSO₄·6H₂O+0.25 mol/L Na₃Cit·2H₂O; …

Photoluminescence Of Photoelectrochemically Etched N+-Si, Guozheng Li, Chengqian Zhang, Xiumei Yang

Journal of Electrochemistry

PS layer on n⁺-Si with (111) orientation prepered by means of photoelectrochemically etched has photo-luminescent (PL) ability like PS layer on usual n-Si. The data of PL spectra and quenching are given.

Milled Carbon Fiber Reinforced Polymer Composition, Brian Massengale, Paul Schauer, Charles Dahle, Barry Gregerson, Bonnie Bachman, Thomas Oesterle

Economics Faculty Research & Creative Works

A milled carbon fiber reinforced polymer having increased abrasion resistive characteristics. The reinforced polymer comprises a base resin selected from the group consisting of polyolefins and polyamides. The base resin is combined with an amount of milled carbon fibers and further may be combined with polytetrafluoroethylene. The resulting composite materials have excellent friction and wear characteristics and are useful in the production of injection molded parts. The molded parts have a high impact strength, exhibit dimensional stability, are abrasion resistive, and are static dissipative, with the composite materials having particular utility as support fixtures for semiconductors during certain processing operations.

Synthesis And Characterization Of Phosphosilicate Glass Films By Lpcvd For Sensor Application, Hui Wu

Theses

This study was dedicated to the synthesis of the thin film materials required to fabricate the waveguide and the reference arm barrier for integrated optical sensor. Phosphosilicate glass (PSG) thin films were synthesized on silicon and quartz wafers by LPCVD using Ditertiarybutylsilane(DTBS), Trimethylphosphite(TMP) and oxygen as precursors. The films were processed at different temperatures between 600°C and 700°C at a constant pressure, and at different flow rate of TMP.

The effect of TMP flow rate and deposition temperature on deposition parameters and the properties of PSG films were investigated. The films deposited were uniform, amorphous, low stress and the composition …

Increased Radiative Lifetime Of Rare Earth-Doped Zinc Oxyhalide Tellurite Glasses, David L. Sidebottom, Michael A. Hruschka, B. G. Potter, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

We have investigated the structural and optical properties of rare earth-doped zinc tellurite glasses modified by the substitution of ZnF₂. Raman and phonon sideband spectroscopies were employed to characterize changes in the glass structure as well as to probe vibrational behavior in the immediate vicinity of the rare earth ion. These measurements are combined with photoluminescence and optical absorption to monitor the effect of halide substitution upon the optical behavior of the rare earth dopant. A substantial increase in the intrinsic radiative lifetime of Nd³⁺ is observed with increasing halide concentration.

Flexural Behavior Of Thermoplastic Beams With And Without Frp Reinforcement, Hilmi Coskun

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the results of an experimental and theoretical study of the flexural behavior of thermoplastic beams with and without fiber-reinforced plastic (FRP) rebars. Tests are conducted on commercially available thermoplastic beams known as Seatimber. The normal stress-strain relations of both the thermoplastic material and FRP rebars are obtained in tension and compression experimentally. These mechanical property curves are then used as part of the input for developing the theoretical moment-curvature relations using an iterative equilibrium procedure. The moment-curvature relations are in turn used for predicting the beam load-deflection curves via the central finite-difference procedure. Behavior predictions are made …

Selective Cvd Growth Of Diamond Crystals On Tungsten, Charles Randal Cole

Electrical & Computer Engineering Theses & Dissertations

Typical field emitters consist of sharp metal tips which usually have a short life due to erosion and contamination. To improve the performance of regular field emitters, diamond can be placed on the emitter tip. This is done by selectively growing diamond on tungsten tips using chemical vapor deposition (CVD) processing. Diamond exhibits negative electron affinity, so that electrons will be emitted by properly biasing the tip.

To obtain single crystal growth right at the tip, a cantilever controlled nucleation method was developed which worked better than other methods. Surface preparation was also important to the growth process. An oxide …

Optically Transparent Composite Material And Process For Preparing Same, D. E. Day, James O. Stoffer, John M. Barr

Materials Science and Engineering Faculty Research & Creative Works

Glass ribbon-reinforced transparent polymer composites which provide excellent optical transparency and a low distortion level over a wide temperature range while exhibiting superior mechanical properties as compared to non- reinforced polymer counterparts, and equivalent properties as compared to glass fiber-reinforced counterparts.

Optimization Of Microstructure Development During Hot Working Using Control Theory, James C. Malas Iii, W. Garth Frazier, S. Venugopal, Enrique A. Medina, Steven Madeiros, Raghavan Srinivasan, R. Dennis Irwin, W. M. Mullins, Anil Chaudhary

Mechanical and Materials Engineering Faculty Publications

A new approach for controlling microstructure development during hot working processes is proposed. This approach is based on optimal control theory and involves state-space type models for describing the material behavior and the mechanics of the process. The effect of process control parameters such as strain, strain rate, and temperature on important microstructural features can be systematically formulated and then solved as an optimal control problem. This method has been applied to the optimization of grain size and process parameters such as die geometry and ram velocity during the extrusion of plain carbon steel. Experimental results of this investigation show …

Electrocatalytic Oxidation Of Methanol On The Stearate Nickel L-B Film, Benzeng Hua, Wenyan Hu, Yanzhen Chen, Yanhong Zhang

Journal of Electrochemistry

The stearate nickel L-B films is good electroacatlyst for the oxidation of methanol MeOH in alkaline. The electrochemical behaviors of stearate nickel L-B films is affected by the concentration of KOH. The rate of quantity of mickel ion and stearic acid in L-B films is 1∶1, which means that the nickel ion may exist in -COONi(OH) form. The electrocatalytic process is influenced by the concentration of OH^-, it involves the penetration of MeOH into the films. The oxidative currents of MeOH are linearly dependent on the bulk concentration.

Surface Modifications Of Carbon Materials Used As Anode Of Lithium Ion Battery Ⅲ. Improvement Of Artificially Imposed Solid Electrolyte Film On Cell Performance, Shuhua Ma, Xiabin Jing, Fosong Wang

Journal of Electrochemistry

The improving effect of solid electrolyte film artificially imposed on carbon electrode was investigated. The result showed that both the charge/discharge capacity and first charge/discharge efficiency, to a certain extent, were enhanced, and the result also suggested the effectiveness of the substitution of the artificially imposed solid electrolyte film for the inherent passivating film which was formed on the surface of the carbon electrode while inserted in the electrolyte during charging or discharging. The Scanning Electron Microscope result displayed the compact and well-defined morphology of the artificially imposed crystalline film.

Investigation On Electro Reduction Behaviour Of Copper Anodic Products In Concentrated Naoh Solutions Ⅱ. Electro Reduction Of Cu(Ⅱ) Products, Jianbo He, Hanhe Chen, Jianxin Lin

Journal of Electrochemistry

Potentiostatic oxidation potentiodynamic or galvanostatic reduction methods have been used to study the cathodic reduction behaviour of various products anodically formed on the second stage of copper oxidation in concentrated NaOH solutions. Seven cathodic current peaks and the corresponding cathodic potential plateaus are observed on the potentiodynamic E/i curves and the galvanostatic E/t curves, respectively. In the negative potential scan, there are three couples of voltammetric peaks which have been attributed to the formation and reduction of CuO, Cu(OH)₂ and Cu(Ⅱ) ion, respectively. The complicated mechanism for the electro formation of the three Cu(Ⅱ) species are discussed.

Studies On The Failure Modes Of Stationary Vrla Batteries, Yibo Tong, Xiangming Qiu

Journal of Electrochemistry

In order to improve the reliability and the quality of stationary valve-regulated lead-acid (VRLA) batteries, the failure modes of the stationary VRLA batteries which caused by the water loss and the thermal runaway are studied. The water loss may be solved by increasing the Oxygen-recombination efficiency, choosing the suitable grid material and the additives of megative paste, decreasing the corrosion of the positive plates. The thermal runaway may be solved by decreasing the inner ohmic resistance of VRLA batteries, improving the outside condition of batteries such as putting into the absorbing-heat material between the abtteries etc..

Preparation And Examination Of Planar Type Solid Oxide Fuel Cells, Yi Jiang, Jingwang Yan, Shizhong Wang, Chunying Yu, Wenzhao Li

Journal of Electrochemistry

The solid oxide fuel cells of planar type (SOFC) have been developed after successfully preparing La_0.8Sr_0.2MnO₃ cathodes and Ni-YSZ ceramic anodes on YSZ plates and solving the high temperature sealing technical problem. Examination of the single cells fabricated showed that the maximum power output at 950 ℃ for H₂ as fuel and air as oxidant reached 0.12 W/cm². It was found that the large polarization overpotential of the Ni-YSZ anode and the Ohmic losses of the cells were two main factors responsible for the relative low output power density.