Materials Science and Engineering Commons^™

Degradation Of Wastewater By Advanced Oxidation Processes Using Green Synthesised Cuo Nanoparticles, Srinivasan Vishal, Anand Sarvesvaron, Muralidharan Keerthana, Hemanth Sanjay Reddy, A Babu Ponnusami

Journal of Metals, Materials and Minerals

This study highlights the green synthesis of CuO nanoparticles using coconut coir extract and evaluates their photocatalytic performance in the degradation of the Brown G dye. The CuO nano-particles were synthesised through sol-gel method, and the biomolecules like polyphenols, tannins and flavonoids acted as reducing agents to stabilise the nanoparticles. The characterisation of these nanoparticles was carried out through XRD, FTIR and FESEM methods. The nanoparticles were used to degrade the dye Brown G under UV irradiation.  Response surface methodology was used to optimise the operating parameter with Box-Behnken design, which is the most suitable for varying 3 or more …

Dual-Functional Activated Carbon From Coffee Grounds For Crystal Violet Dye Removal And Subsequent Application As An Electrode Material In Energy Storage Devices, Sirikorn Khaophong, Tawatchai Kangkamano, Sonchai Intachai, Panita Kongsune

Journal of Metals, Materials and Minerals

The conversion of agricultural waste into high-value functional materials offers a sustainable strategy to address environmental concerns. In this study, activated carbon was synthesized from spent coffee grounds (CGAC) via KOH activation and used for crystal violet (CV) dye adsorption. Under optimal conditions (0.5 g dosage, 300 mg∙L‒1 CV, 30°C, 120 min), CGAC achieved 91.41% removal efficiency, with adsorption behavior fitting pseudo-second-order kinetics and the Freundlich isotherm. Thermo-dynamic parameters confirmed a spontaneous and endothermic process. Moreover, the reusability study revealed that CGAC maintained a high removal efficiency above 88% after seven adsorption–desorption cycles, demonstrating its structural stability and potential for …

Investigation On The Tribological Properties Of Al2o3-Tic Substrates In Fixed Abrasive Lapping For Data Storage Applications, Benjie Locsing Fernandez, Thanakrit Srisuwan, Duangamol Tungasmita, Sukkaneste Tungasmita

Journal of Metals, Materials and Minerals

Alumina titanium-carbide (Al2O3-TiC) or simply AlTiC substrates were widely used in the magnetic recording industry for their superior mechanical and tribological properties. This study investigated the effect of AlTiC substrate crystal structure, chemical bonding and grain size in slider fix abrasive lapping tribology. Two types of AlTiC substrates, Type-A AlTiC and Type-B AlTiC equipped with an electro lapping guide (ELG), fully functional reader and writer devices were used in the study. The type-B lower material removal rate resulting to rougher surface finish was mainly due weakening caused by the titanium oxycarbide phase, which was the dominant factor, outweighing the minimal …

Surface Properties And In-Vitro Bioactivity Studies Of Tio2 Nanowire Doped Transition Metal (M=Fe, Co, And Mn), Misriyani Misriyani, Enayah Enayah, Z. Ryan Tian, Andi Meutiah Ilhamjaya

Journal of Metals, Materials and Minerals

This study investigates the influence of transition metal (Fe, Co, Mn) doping on the surface properties and in-vitro bioactivity of TiO2 nanowires. It aims to elucidate how transition-metal doping alters the surface behavior and biological response of TiO2 nanowires, enabling their potential use in biocompatible and magnetically responsive materials. Magnetic TiO2 nanowires doped with transition metals (Mx+/TiO2) were successfully prepared by a hydrothermal method using titanium dioxide in alkaline solution. Cations were added with Ti/Mx+ molar ratios of 5 to produce Fe/TNW, Co/TNW, and Mn/TNW. Characterization using SEM and XRD determine their surface properties. In-vitro bioactivity tests were conducted by …

Properties And Printability Of Polylactic Acid Films : An Effect Of Polyglutamate Coated Natto As A Bio-Plasticizer, Natrata Thitinardwong, Thira Chavarnakul, Kawee Srikulkit

Journal of Metals, Materials and Minerals

Polylactic acid (PLA) film, a biodegradable alternative to petroleum-based plastics, has gained significant attention for sustainable packaging applications. However, its limited screen-printability remains a barrier to broader commercial use. This study aims to enhance the screen-printability of PLA film by incorporating a polyglutamate coated natto (designated as Nat-M). PLA/Nat-M films having 1%, 3%, and 5% Nat-M were prepared and evaluated for their key performance indicators, including ink adhesion (ASTM D3359), tone reproduction accuracy, and printing resolution. The screen-printing resolution was optimized between 400 DPI and 500 DPI (dots per inch) to achieve optimal tone reproduction and edge sharpness. Additionally, ink …

A Top-Electrode-Based Liquid-Solid Triboelectric Nanogenerator For Energy Harvesting And Ethanol Detection, Subrat Bhol, Nakul Charan Sahu, Sunit Gaurav Mohanty, Vicky Raj Maddala, Basanta Kumar Panigrahi, Premkumar Bhosale

Journal of Metals, Materials and Minerals

Liquid-solid triboelectric nanogenerators (LS-TENGs) offer a promising avenue for self-powered energy harvesting and sensing by exploiting contact electrification at fluid-dielectric interfaces, where droplet dynamics drive charge separation for electrical output without external power. In this work, a top-electrode LS-TENG was fabricated using a polytetrafluoroethylene (PTFE) film on a PMMA substrate with deionised water droplets, achieving an open-circuit voltage of ‒3.4 V, short-circuit current of 3.6 μA, and peak power of 1.48 nW at 100 MΩ under optimised conditions of 2 cm drop height, 45° tilt, and 50 μL volume. Performance scaled with droplet kinetics and volume due to enhanced contact …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Parts, Logan Trimmer

Harrisburg University Other Works

Presentation covering the broad strokes of the project. The goal was to prove the viability of hybrid/additive manufacturing for high stress automotive applications. This project focused on recreating a piston from an old engine to examine if hybrid manufacturing could be used for such applications. On a small scale, hybrid manufacturing was able to be more cost effective if the costs of the equipment and electricity were ignored. The decision to ignore those costs came from the inability to find accurate prices for industrial casting.

Made On Mars: Design And Manufacturing Of Structural Polymer-Regolith Composites, Pailey M. Vitale

Williams Honors College, Honors Research Projects

Human exploration of Mars is constrained by harsh environmental conditions and the prohibitive cost of transporting materials from Earth. Long-term sustainability requires the local production of mechanical and structural components using resources available on Mars, thereby minimizing payload mass. This project investigates polymer–regolith composites derived from atmospheric CO₂ and mineral-rich regolith as a pathway toward in-situ manufacturing. These composites, when compatible with additive manufacturing, could replace imported plastics, enable on-demand fabrication, and support closed-loop recycling systems. The objective is to design and evaluate polymer–regolith composites that maintain mechanical integrity and environmental resistance under Martian conditions, including extreme temperature swings, radiation …

Critical Parameters Controlling Oxide Scale Formation And Hydro-Descaling Efficiency During Steelmaking, Tochukwu Princewill Ojiako

Doctoral Dissertations

In modern steelmaking, cast slabs are exposed to high-temperature oxidizing environments during secondary cooling, reheating, and hot rolling, resulting in the formation of multilayer oxide scales on the steel surface. These scales interact with mold-flux residues originating from the casting process (CC). The morphology, chemistry, and adhesion of oxide scale strongly influence its removability during high-pressure hydraulic descaling and ultimately determine the surface quality of hot-rolled products. However, the mechanistic relationship between oxide scale evolution, scale-steel interfacial structure, and hydraulic descaling performance remains poorly understood.

This dissertation investigates oxide scale formation, modification, and removal in low-carbon thin-slab steels produced by …

The Efficacy Of Hybrid Manufacturing For High Stress Automotive Components, Logan Trimmer

Harrisburg University Other Works

The goal of this research was to establish the viability of using hybrid manufacturing for automotive applications. By verifying that high-stress components can be created, it can be assumed that any other lower stress part could be made to match the strength requirements. A limiting factor of adoption for hybrid manufacturing is how new the technology is. Studies on time and cost were performed allowing for comparisons with traditional manufacturing technologies (casting, forging, milling) used in automotive applications. This research utilized a Haas Automation UMC750 5-axis CNC mill with a Meltio laser wire direct energy deposition attachment. Fusion 360 was …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Two Members Of The Editorial Board Of Journal Electrochemistry, Kai Wu Elected As An Academician Of The Chinese Academy Of Engineering And Yi Cui A Foreign Academician Of The Chinese Academy Of Sciences, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electrochemical Characterization And Modulation Of Biological Processes, Yue-Qi Li, Wei-Hua Huang, De-Chen Jiang, Bao-Hong Liu, Bin Su, Yang Tian, Jing-Juan Xu, Ping Yu, Feng Zhao, Huang-Xian Ju, Jing-Hong Li

Journal of Electrochemistry

Electrochemical processes lie at the core of biological function, governing energy transduction, metabolic flux, and molecular signaling. Recent advances in electrochemical science now allow these processes to be probed and controlled with unprecedented spatial, temporal, and chemical resolution. In this review, we present an integrated framework that progresses from fundamental mechanisms to analytical technologies and functional modulation. We begin by outlining electron transfer pathways in mitochondrial respiration, microbial extracellular electron transfer, and DNA- and protein-based charge conduction, followed by the principles of photon-electron conversion in photosynthesis and the central role of redox equilibrium in coordinating cellular responses. We then highlight …

A Novel Electrolyte Pyridine Additive For Enhancing Cycle Life Of Lithium-Ion Batteries, Peng-Cheng Wang, Ding-Chang Li, Jun-Tao Li, Guang-Bo Lu, Shi-Wen Wang

Journal of Electrochemistry

Lithium-ion (Li-ion) battery using a graphite (Gr.) anode and a lithium iron phosphate (LiFePO₄, LFP) cathode (Gr.||LFP) has been widespread in energy storage. To match the warranty period of energy storage systems, the lifespan of this kind of Li-ion battery, not only under room temperature but also under relatively high temperature, is critical. Exploration of functional electrolyte additive provides an efficient approach to address this issue. This study reports the usage of pyridine (Py) as a new electrolyte functional additive for Gr.||LFP. In the first cycle, it was found that Py can be reduced before ethylene carbonate and …

Journal Of Electrochemistry Officially Indexed By Leading Oa Databases Oarl And Coaj, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Feature Column Of Journal Of Electrochemistry Nominated For 2025 Top 10 Famous Columns Of Fujian Provincial Newspapers And Periodicals, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Use Of Alaçatı Stone Aggregate In Conventional And Self-Consolidating Concretes, Tahir Kemal Erdem

Journal of Sustainable Construction Materials and Technologies

Alaçatı stone or Alapietra stone is widely used mostly for building cladding. However, its production and use in the construction sites generate high amounts of waste (debris), causing environmental pollution in Çeşme which is a touristic district. This study investigated the reuse of Alaçatı stone as lightweight aggregate (LWA) in both conventional and self-consolidating concrete (SCC) mixtures. The concretes were prepared to have three different water-to-cement ratios (w/c), which were 0.38, 0.42 and 0.48. For each w/c, a conventional concrete mixture and two SCC mixtures with 60 or 70 cm slump flow were produced by varying the superplasticizer SP content. …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Durability Of Alkali-Activated Concretes Under 5% Sulfuric Acid Environment, Celal Karabaş, Anıl Niş

Journal of Sustainable Construction Materials and Technologies

The investigation focused on the resistance to 5% sulfuric acid degradation of the alkali-activated concretes (AAC). The AAC was manufactured using a blended binder of 50% slag and 50% F-type fly ash. The AAC was activated using a blend of 14 M sodium hydroxide and sodium silicate, with a hydroxide-to-silicate ratio of 1/2,5. Six AAC were produced against a 5% sulfuric acid environment, varying the binder amounts (400–500–600 kg/m3) and activator-binder (A/B) ratios (0,45–0,55). The chemical resistance of AAC was evaluated by visual appearance, variation in weight and compressive strengths. The findings pointed out that more gypsum and higher weight …

Comprehensive Risk Assessment For Construction Site Managers In Kosovo: A Mixed-Method Approach, Muhamet Ahmeti, Besian Sinani

Journal of Sustainable Construction Materials and Technologies

This study developed and validated a hybrid ISO 31000:2018 Kosovo-compliant risk assessment framework tailored for construction site managers operating within transitional economies. The research employed audits of 20 ISO-certified contractors in Pristina, Kosovo, along with field observations, interviews, and quantitative risk matrices. The findings indicate a critical concentration of risk, with 70% of firms classified as "High" or “Very High” risk. The most prevalent hazards identified were working at height without collective protection, unprotected electrical systems, and manual handling of heavy materials. Regression analysis revealed that firms with a designated safety champion achieved significantly lower risk scores, whereas those with …

Behaviour Of Internally Strengthening Hollow Stainless-Steel Hot-Rolled Circular Columns Filled With Crumb Rubber And Recycled Aggregate Concrete, Wadhah M. Tawfeeq, Mohammed M. Rasheed, Mithaq Kohees, Ahmed W. Al Zandd, Saif Al-Balushi, Hamed Al Abdul Salam

Journal of Sustainable Construction Materials and Technologies

Stainless-steel sections are increasingly being utilised in favour of their higher durability. Simultaneously, the use of recycled materials in concrete is aligned with the global concern to encourage sustainable and environmentally friendly construction. The paper examined the behaviour of stainless-steel columns filled with concrete with crumb rubber (CR) and recycled aggregate (RA). It analysed the effect of different percentages of CR (0, 15, and 30) and RA (0, 15, and 50) on the compressive strength of the concrete and the performance of the columns using stainless-steel hollow sections. 20 specimens were manufactured, 18 of which were cast with concrete containing …

Piezoelectric Concrete: A Smart Material Approach For Energy-Harvesting Structural Technologies, Dianah Mazlan, Vynotdni Rathinasamy, Naveen Kumar, Liu Chunpeng, Elango Elango

Journal of Sustainable Construction Materials and Technologies

The rapid growth of urban infrastructure demands innovative materials that not only support structural performance but also contribute to sustainability through energy harvesting. Piezoelectric concrete, which integrates ceramics, polymers, nanomaterials, and bio-based fillers into cementitious matrices, has emerged as a promising solution. This review systematically explores the fundamentals of piezoelectricity in concrete, highlighting how stress-induced electromechanical coupling enables both energy harvesting and structural health monitoring. The paper critically evaluates major material systems including PZT ceramics, PVDF polymers, hybrid nanocomposites, and emerging bio-based materials, alongside their integration strategies such as embedded and surface-mounted approaches. Applications across pavements, bridges, and smart buildings …

In-Situ Investigations Of Calcium-Magnesium-Aluminosilicates (Cmas) Infiltration Effects On Thermal Barrier Coatings Under Extreme Environments Replicating Jet Engines, Zachary Stein

Doctoral Dissertations and Master's Theses

Calcium-magnesium-aluminosilicate (CMAS) particulates, such as sand or volcanic ash, are ingested by gas turbine jet engines during operation. When operating within high abundance regions, these particulates negatively interact and degrade the high temperature thermal barrier coatings (TBC) protecting underlying superalloy turbine blades vital to engine operation. These CMAS particulates melt within the engine and infiltrate into the ceramic coatings. In electron-beam physical vapor deposited (EB-PVD) TBCs, the CMAS within the intercolumnar gaps stiffens the coatings and causes thermomechanical induced high stress concentrations, risking crack formation. While molten, the CMAS thermochemically alters and destabilizes the coating, also risking coating failure. Premature, …

Simulation Of Stress, Deformation, And Vibration In Unlubricated Ball Bearings At Varying Rotational Speeds, Billy Dwiki, Moh. Hartono

Journal of Mechanical Engineering Science and Technology (JMEST)

Bearings are critical components in rotating machinery, and their performance is highly influenced by operational factors such as rotational speed, load, and lubrication. This study aims to analyze the deformation, stress, and dynamic behavior of SAE 52100 bearings under dry operating conditions at various rotational speeds, as well as to propose mitigation strategies for high-speed industrial applications. A finite element simulation was conducted using ANSYS R19.2 to evaluate the total deformation, equivalent elastic strain, Von Mises stress, and vibrational characteristics of a 6204-type SAE 52100 bearing. The simulations were performed across a speed range of 600 to 2000 RPM under …

Optimizing Zeolite Catalysts For Efficient Ldpe Plastic Waste Pyrolysis, Hilda Porawati, Mazwan Mazwan, Sukadi Sukadi

Journal of Mechanical Engineering Science and Technology (JMEST)

The problem of plastic waste, particularly from low-density polyethylene (LDPE) plastic bags, poses a significant challenge in environmental management due to its non-biodegradable nature and widespread use in daily life. This study evaluates the influence of catalyst types on the characteristics and energy efficiency of liquid fuel products produced from LDPE waste pyrolysis. The three treatments compared were no catalysts, natural zeolite catalyst, and synthetic zeolite catalysts, each subjected to three different temperature variations: 250°C, 300°C, and 350°C. The observed parameters in this study were volume, product mass, cetane index, density, sulfur content, viscosity, flash point, calorific value, and energy …

Thermophysical, Rheological And Wear Resistance Of Canola Oil Biolubricant With Calcium Carbonate Additive Nanoparticle As Coolant In Cnc Machining, Alfandi Jaelani, Poppy Puspitasari, Diki Dwi Pramono, Alief Muhammad, Muhammad Kozin, Muhammad Kashif

Journal of Mechanical Engineering Science and Technology (JMEST)

Vegetable oil-based cutting fluids are of great importance in supporting green and sustainable manufacturing. This research introduces a new groundbreaking vegetable lubricant formulated with canola oil as the base material, coupled with CaCO3 nanoparticles synthesized from scallop shell waste and used as a cutting fluid in the AISI 1045 CNC machining process steel sprayed with minimum quantity lubrication (MQL). This investigation delves into the thermophysical, rheological, and wear resistance of the developed bio-lubricant. The results of this analysis show density value increased in the canola + CaCO3 0.15% sample by 3.28% of the pure canola sample, as did the viscosity …

Improvement Of Thermal Energy Storage Performance In Al-Al2o3 Composites Through Additions Of Copper: Evaluation Of Microstructure And Thermal Properties, Muhammad Hasan Basri, Ramang Magga, Muhammad Syaiful Fadly, Zikri Arifansyah Djaba, Muhammad Iqbal Ibrahim, Hidayat Hidayat, Yandi Yandi

Journal of Mechanical Engineering Science and Technology (JMEST)

The study aims to evaluate the influence of adding copper aluminum–alumina composite (Al–Al₂O₃) against characteristic thermal properties through metallurgical powder. Three variations of the composition of weight copper were used, namely 5%, 10%, and 15%, with aluminum as the matrix and alumina as the reinforcement. Thermal test covering analysis of thermal conductivity, specific heat, and microstructure characterization using SEM-EDX. The results show that adding Cu increases thermal conductivity significantly, with the highest mark achieved in the 15% Cu composite (6.47 W/m.°C). However, the increase in Cu content above 10% causes the agglomeration of particles and enhancements in porosity, which harms …