Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 61 - 90 of 2925

Full-Text Articles in Materials Science and Engineering

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas Mar 2026

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Go to article

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun Feb 2026

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun

Journal of Electrochemistry

Redistribution Layer (RDL), composed of layered dielectrics and electroplated copper materials, is a basic structure to rearrange numerous I/O pads on the chip surface in wafer-level advanced packaging. As the key chemicals in electrolyte baths, electroplating additives have undergone continuous development to meet the industrial needs for high-speed and fine-line/fine-pitch applications. Meanwhile, the intricate relationships between additive chemical structures and electroplated copper properties are yet to be well understood. In this work, a pair of triphenylmethane-based dye molecules, i.e., gentian violet (GV) and methyl green (MG), was comparatively investigated as levelers for high-speed RDL copper electroplating. Compared to GV, significantly …

Go to article

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu Feb 2026

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO2+/VO2+ and V2+/V3+ couples. One of the major challenges for VRFBs is the slow charge transfer in VO2+/VO2+ and V2+/V3+ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …

Go to article

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii Feb 2026

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii

Journal of Electrochemistry

Anodic aluminium oxide (AAO) porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light, and high thermal stability up to 1500 °C. These porous films are prepared by aluminium anodizing at high voltages in weak acids, leading to a slow kinetics of initial stages of porous structure formation. Here, we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid. Aluminium foils, pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer, were …

Go to article

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour Feb 2026

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour

Journal of Sustainable Construction Materials and Technologies

Thermal insulation materials play a significant role in balancing buildings' total carbon emissions. Balancing involves applying the optimized amount of insulation materials to avoid excessive emissions in either the operational or embodied phases. Due to the wide range of insulation materials and variations of their specifications, it is vital to analyse them individually. The focus of this study is to optimize the amount of insulation materials in the facades of Residential Buildings (RB) to balance the amount of Operational Carbon Emissions (OCE) and Embodied Carbon Emissions (ECE) by applying the Building Information Modelling-Life Cycle Assessment (BIM-LCA) integration method. The Life …

Go to article

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib Feb 2026

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib

Journal of Sustainable Construction Materials and Technologies

Integrating sustainable material procurement with construction waste management is essential to reduce construction and demolition waste in Libya, where current practices remain largely reactive and disposal-oriented. This narrative review aims to develop a conceptual framework linking procurement decisions to waste-generation pathways in Libyan construction projects, clarifying how proactive, sustainability-driven purchasing can serve as a primary driver of waste prevention. Using a PRISMA-guided systematic search of Web of Science, Scopus, and IEEE Xplore for 2001–2026, and a bibliometric analysis via VOSviewer, 956 high-quality studies were synthesized to map global knowledge and to expose the paucity of integrated SMP–CWM studies in developing …

Go to article

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan Feb 2026

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan

Journal of Sustainable Construction Materials and Technologies

This study investigates the potential of limestone calcined clay cement (LC3) as a sustainable binder for developing a single-layer composite material incorporating barite and rubber aggregates, hypothesized to achieve enhanced sound insulation performance compared to conventional multi-layered wall systems. Mortars were prepared using LC3 with 55% clinker, 30% metakaolin, 15% limestone, substituting 45% of cement clinker. Hybrid mixtures of barite and rubber aggregates (barite-to-rubber volume ratios of 2:1 and 1:2) were tested at aggregate-to-binder ratios of 2.0, 2.75, and 3.5 to evaluate their combined mass and damping effects on acoustic performance. Experiments were conducted to determine physical, mechanical, and acoustic …

Go to article

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh Feb 2026

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh

Journal of Sustainable Construction Materials and Technologies

Soil stabilization remains a critical challenge in geotechnical engineering, particularly for weak and expansive soils that compromise the safety and serviceability of infrastructure. Traditional stabilizers such as lime and cement have been widely applied; however, their limitations in terms of long-term durability, carbon footprint, and performance under aggressive environmental conditions necessitate alternative approaches. In recent years, geopolymer-based stabilizers derived from industrial by-products such as fly ash (FA), slag, and bottom ash (BA) have emerged as promising substitutes. This review critically examines the comparative performance of lime and geopolymer stabilization with respect to strength development, durability, compressibility, environmental impact, and economic …

Go to article

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P Feb 2026

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P

Journal of Sustainable Construction Materials and Technologies

This study addresses the unresolved gap in quantifying how recycled fine aggregates (RFA) and metakaolin (MK) interact synergistically in self-compacting concrete (SCC), a relationship that previous works have studied only in isolation or without mechanistic justification. Twenty-five SCC mixtures containing MK (0–25%) and RFA (0–100%) were evaluated to generate a unified understanding of fresh behaviour, strength development, pore refinement, interfacial transition zone (ITZ) characteristics, and sustainability indicators. Results show that RFA alone increases water demand and reduces strength, while MK compensates for these losses by densifying the matrix and improving ITZ bonding, as confirmed through SEM analysis. An optimum synergy …

Go to article

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar Jan 2026

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Go to article

Carbon Supported Octahedral Ptni Nanoparticles (Oct-Ptni/C) As A Cathode Catalyst For Proton Exchange Membrane Fuel Cells (Pemfcs) With Improved Activity And Durability, Zi-Wei Feng, Hai-Zhong Chen, Xiao Duan, Ling Tang, Yun-Kun Zhao, Long Huang Jan 2026

Carbon Supported Octahedral Ptni Nanoparticles (Oct-Ptni/C) As A Cathode Catalyst For Proton Exchange Membrane Fuel Cells (Pemfcs) With Improved Activity And Durability, Zi-Wei Feng, Hai-Zhong Chen, Xiao Duan, Ling Tang, Yun-Kun Zhao, Long Huang

Journal of Electrochemistry

Proton exchange membrane fuel cells (PEMFCs) are considered as a promising renewable power source. However, the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction (ORR) kinetics even on state-of-the-art Pt catalyst. Octahedral PtNi nanoparticles (oct-PtNi NPs) with excellent ORR activity in a half-cell have been widely studied, while their performance in membrane electrode assembly (MEA) has much less reported. Herein, we investigated the MEA performance using the carbon supported oct-PtNi NPs (oct-PtNi/C) as the cathode catalyst. Under the mild acid washing condition, the surface …

Go to article

Development Status And Existing Problems Of Ion-Solvation Membranes For Electrolysis Of Water, Zheng-Yuan Zhou, Yu-Tao Sun, Zheng-Bang Liu, Chuan-Zheng Wang, Yong-Nan Zhou, Xi Luo, Tian-Chi Zhou, Jin-Li Qiao Jan 2026

Development Status And Existing Problems Of Ion-Solvation Membranes For Electrolysis Of Water, Zheng-Yuan Zhou, Yu-Tao Sun, Zheng-Bang Liu, Chuan-Zheng Wang, Yong-Nan Zhou, Xi Luo, Tian-Chi Zhou, Jin-Li Qiao

Journal of Electrochemistry

Ion-solvaing membranes (ISMs) have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices. This article provides an overview of structural composition, performance advantages, research progress, ion conduction mechanism and existing issues of ISMs, primarily classifying them according to the matrix structure. A detailed analysis of performance enhancement methods, key performance indicators of ISMs and performance influencing factors is also presented. The article contributes to further optimizing the design and application of ion-solvation membranes, providing theoretical support for the development of fields such as hydrogen production through electrolysis of water and electrochemical energy …

Go to article

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao Jan 2026

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao

Journal of Electrochemistry

Aqueous sodium-ion batteries (ASIBs) have attracted great attention in aqueous batteries due to their merit of high safety. However, the constrained work potential and insufficient chemical stability of anode materials in aqueous electrolytes hinder the large-scale application of ASIBs. Sodium titanium phosphate, NaTi2(PO4)3 (NTP), is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure. Recently, great achievements have been made in the development of NTP, however, a comprehensive review of existing studies is still lacking. This article firstly introduces the basic properties of NTP and …

Go to article

Iron-Involved Orr Electrocatalysts Under The Lens Of In-Situ/Operando Mössbauer Spectroscopy, Sumbal Farid, Jun-Hu Wang Jan 2026

Iron-Involved Orr Electrocatalysts Under The Lens Of In-Situ/Operando Mössbauer Spectroscopy, Sumbal Farid, Jun-Hu Wang

Journal of Electrochemistry

Exploring cost-effective and efficient catalysts for oxygen reduction reaction (ORR) poses a significant challenge, especially in the pursuit of alternatives to precious metals like platinum. Significant advancements have driven electrochemists to develop efficient ORR catalysts using abundant materials, particularly iron (Fe)-based, known for their exceptional performance in ORR. While the crucial function of Fe in boosting ORR catalytic activity is recognized, the connection between material attributes and catalytic performance remains enigmatic. Understanding the dynamic processes involved in oxygen electrocatalysis is paramount for designing precious-metals-free ORR electrocatalysts. Mössbauer spectroscopy stands out as a powerful technique for deciphering the structural characteristics of …

Go to article

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley Jan 2026

The Effects Of Mold Flux Contamination On Oxide Scale Formation And Hydro-Descaling Efficiency During Steel Processing, Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were …

Go to article

Thermal Transformations And Mechanical Properties Of All-D-Metal Mn2fecu Heusler-Type Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely Jan 2026

Thermal Transformations And Mechanical Properties Of All-D-Metal Mn2fecu Heusler-Type Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely

Materials Science and Engineering Faculty Research & Creative Works

All-d-metal Heusler alloys are emerging functional materials in which magnetic ordering, lattice distortion, and mechanical behavior are strongly coupled through d–d electronic interactions. This study systematically investigates the structural, thermal, magnetic, and mechanical properties of Mn₂FeCu synthesized within a Heusler-type compositional framework. SEM/EDS revealed a dual-phase FCC-based microstructure consisting of Mn–Fe–rich and Mn–Cu–rich domains, while XRD confirmed FCC symmetry with compositional partitioning rather than full L2₁ ordering. Differential scanning calorimetry identified partial melting of the Cu-rich phase near ~ 900 °C. Dilatometry showed a thermoelastic FCC → FCT transformation at ~ 770–780 °C with a recoverable strain of ~ 0.067%. …

Go to article

Development Of Stronger, More Extrudable 6xxx Series Alloys For Automotive Applications, Eli A. Harma Jan 2026

Development Of Stronger, More Extrudable 6xxx Series Alloys For Automotive Applications, Eli A. Harma

Dissertations, Master's Theses and Master's Reports

6xxx alloys are widely used in automotive extrusion structures for their high specific strength and formability. Advanced designs require greater formability and strength, creating an opportunity for high-strength, formable alloys. The 6xxx series forms β”-Mg5Si6 precipitates during age hardening and develops a fibrous microstructure during extrusion, both strengthening the alloy. Increasing Mg and Si to form more β” decreases formability. Thus, modifying texture can increase strength without reducing formability. Current alloys like 6005A add Mn and Cr to form dispersoids that inhibit recrystallization and promote strengthening textures; however, high Mn and Cr concentrations reduce formability. Replacing Mn …

Go to article

A Review On Biomass-Derived Hard Carbon Anodes For Sodium-Ion Batteries : From Carbon Precursors To Storage Mechanisms, Anqi Lu, Jiaqian Qin Jan 2026

A Review On Biomass-Derived Hard Carbon Anodes For Sodium-Ion Batteries : From Carbon Precursors To Storage Mechanisms, Anqi Lu, Jiaqian Qin

Journal of Metals, Materials and Minerals

The rapid development of sustainable energy technologies has intensified the demand for cost-effective and high-performance energy storage systems. Sodium-ion batteries (SIBs) are regarded as one of the most promising alternatives to lithium-ion batteries (LIBs) owing to their low cost, abundant sodium resources, and similar electrochemical mechanisms to LIBs. Hard carbon (HC) has attracted significant attention as the predominant anode material for SIBs due to its low cost, structural tunability, and availability from diverse precursors. Nevertheless, challenges remain, including the unclear Na+ storage mechanism, limited rate capability, and strong dependence on precursor type. This review systematically summarizes recent advances in HC …

Go to article

Mechanical Properties And Crystallization Of Polybutylene Terephthalate Reinforced With Glass Flakes And Aluminum Powder, Nattakarn Hongsriphan, Pajaera Patanathabutr Jan 2026

Mechanical Properties And Crystallization Of Polybutylene Terephthalate Reinforced With Glass Flakes And Aluminum Powder, Nattakarn Hongsriphan, Pajaera Patanathabutr

Journal of Metals, Materials and Minerals

This research investigated mechanical properties and crystallization of poly(butylene terephthalate) composites by adding glass flakes (GF) and aluminum particles (Al). The concentration of the GF was 3 wt% or 5 wt%, and the Al was 0.5 wt% or 1.0 wt%. The stress-strain curves of the PBT-based composites showed yielding and necking. The PBT/GF/Al composites with GF/Al ratios of 3/0.5 wt/wt%, 3/1.0 wt/wt%, 5/0.5 wt/wt%, and 5/1.0 wt/wt% had Young’s moduli of 11.44%, 11.70%, 16.81%, and 19.31% higher than that of neat PBT, respectively. In the presence of Al at 1.0 wt%, the flexural modulus of the PBT/GF/Al composites increased to …

Go to article

Synthesis, Structure, And Electrochemical Properties Of The Ni(Oh)2/Nimoo4 Composite On The Rgo/Nf Template For Hybrid Battery-Supercapacitor Electrodes, Retno Asih, Haniffudin Nurdiansah, Rogabe Sianipar, Ida Ayu Gayatri, Lukman Noerochim, Diah Susanti, Isao Watanabe, Darminto Darminto Jan 2026

Synthesis, Structure, And Electrochemical Properties Of The Ni(Oh)2/Nimoo4 Composite On The Rgo/Nf Template For Hybrid Battery-Supercapacitor Electrodes, Retno Asih, Haniffudin Nurdiansah, Rogabe Sianipar, Ida Ayu Gayatri, Lukman Noerochim, Diah Susanti, Isao Watanabe, Darminto Darminto

Journal of Metals, Materials and Minerals

The growing demand for renewable and sustainable energy has intensified research on advanced energy-storage systems that can deliver both high energy and power densities. In this study, a Ni(OH)2/ NiMoO4 composite on a reduced graphene oxide/nickel foam (rGO/NF) template was synthesized through a hydrothermal and electrodeposition route to construct a hybrid battery-supercapacitor electrode. The unique hierarchical design combines the pseudocapacitive activity of Ni(OH)2/NiMoO4 with the excellent conductivity of rGO and the high surface area of NF, enabling efficient electron and ion transport. Structural and morphological analyses confirm the successful formation of the Ni(OH)2/NiMoO4/rGO/NF architecture. The electrode exhibits a specific capacitance …

Go to article

Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant Jan 2026

Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant

Journal of Metals, Materials and Minerals

Poly(lactic acid)/ethylene-propylene-diene monomer (EPDM)/cellulose composites using cellulose derived from hemp biomass (CHB) were investigated in this research. Morphology, chemical structures, functional groups, and crystallinity of CHB were characterized, observing a size of 135 ± 32 μm from SEM images with high purity and crystallinity from FT-IR and XRD spectroscopy. The optimized CHB was incorporated at 1 phr, 3 phr, and 5 phr into PLA/EPDM blends at 90/10 w/w. The polymer composites were prepared using an internal mixer, and samples were produced by compression molding for mechanical and thermal testing. The results indicated that the EPDM phase dispersed as droplets in …

Go to article

Effects Of Gum Additives On Nickel Electroplating For Enhancing Steel Corrosion Resistance, Supitcha Supansomboon, Manatsawee Maneekan, Chanyanut Saenthaweesuk, Duangta Sitthichokcharoen, Natthapong Phinichka Jan 2026

Effects Of Gum Additives On Nickel Electroplating For Enhancing Steel Corrosion Resistance, Supitcha Supansomboon, Manatsawee Maneekan, Chanyanut Saenthaweesuk, Duangta Sitthichokcharoen, Natthapong Phinichka

Journal of Metals, Materials and Minerals

Low-carbon steels are widely used across various industries but have limited corrosion resistance, leading to safety hazards and a shortened service life. Nickel plating is a common method for enhancing steel corrosion resistance. The plating bath solution can be modified by adding additives to improve the properties of the coating. In this research, gum arabic, guar gum and gelatin were used as additives in a nickel electroplating bath. SS400 low-carbon steel, as a substrate, was plated with nickel from these different baths at 5 V for 25 min. Nickel coated with green additives showed higher hardness compared to those without …

Go to article

Effect Of Cu Content On Microstructure, Morphology, And Antibacterial Properties Of Ti-Cu Alloy Thin Films, Chittra Kedkaew, Phalakorn Khwansungnoen, Tanattha Rattana Jan 2026

Effect Of Cu Content On Microstructure, Morphology, And Antibacterial Properties Of Ti-Cu Alloy Thin Films, Chittra Kedkaew, Phalakorn Khwansungnoen, Tanattha Rattana

Journal of Metals, Materials and Minerals

Ti-Cu alloy thin films exhibit considerable potential for the development of advanced antibacterial surfaces, particularly for biomedical applications. In this research, Ti-Cu binary alloy thin films with a wide range of Cu content from 25.8 at% to 77.8 at% were deposited using magnetron co-sputtering with pure Ti and Cu as the targets. The composition of Cu in the films can be controlled by the applied power of Cu targets. This study investigated the effect of Cu content on the microstructural, morphological, and antibacterial properties using X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Atomic force microscopy (AFM), X-ray photoelectron …

Go to article

Contributions Of Carbon Content And Cooling Rate On Phase Transformations And Mechanical Properties Of Sintered Fe-1.5cr-0.2mo-Xc Alloys, Mantana Yaruan, Wantana Koetniyom, Thanyaporn Yotkaew, Nattaya Tosangthum, Ruangdaj Tongsri Jan 2026

Contributions Of Carbon Content And Cooling Rate On Phase Transformations And Mechanical Properties Of Sintered Fe-1.5cr-0.2mo-Xc Alloys, Mantana Yaruan, Wantana Koetniyom, Thanyaporn Yotkaew, Nattaya Tosangthum, Ruangdaj Tongsri

Journal of Metals, Materials and Minerals

Microstructural development in sintered Fe-1.5Cr-0.2Mo-xC alloys, produced under different cooling rates of 0.1℃∙s‒1 and 5.4℃∙s‒1, was investigated. It was found that, in slowly sintered Fe-1.5Cr-0.2Mo-xC alloys, the microstructure changed from hypoeutectoid to eutectoid and to hypereutectoid steel microstructural features with increasing carbon content. Under the fast-cooling rate of 5.4℃∙s‒1, the microstructural change with respect to the increase of carbon content involved the competition between the formation of ferrite + carbide mixture and that of martensite-austenite constituent. The increase of tensile strength of slowly cooled sintered Fe-1.5Cr-0.2Mo-xC alloys with increasing carbon content was attributed to …

Go to article

Synergy Of Ground Granulated Blast-Furnace Slag And Limestone Powder In Ternary Cement: Effects On Heat Of Hydration And Strength Development, Pailyn Thongsanitgarn, Watcharapong Wongkeo, Thanongsak Nochaiya, Arnon Chaipanich Jan 2026

Synergy Of Ground Granulated Blast-Furnace Slag And Limestone Powder In Ternary Cement: Effects On Heat Of Hydration And Strength Development, Pailyn Thongsanitgarn, Watcharapong Wongkeo, Thanongsak Nochaiya, Arnon Chaipanich

Journal of Metals, Materials and Minerals

This study explores the synergistic effect of ground granulated blast-furnace slag (GGBS) and limestone powder (LS) on the hydration behavior and mechanical performance of ternary cement systems. Calorimetry revealed that 30GGBS mix showed a significantly lower peak of about 2.3 mW∙g‒1 and a delayed response. In contrast, the incorporation of LS enhanced early hydration, with the 30LS mix reaching a peak of approximately 2.8 mW∙g‒1 around 6 h. Among ternary blends, 15GGBS–15LS exhibited the highest and earliest heat flow peak (about 2.55 mW∙g‒1 around 7.5 h), while 25GGBS–5LS showed a slower response (about 2.45 mW∙g‒1 around 9.5 h). Despite differences …

Go to article

Effect Of Garnet Incorporation On The Functional Properties Of Sunscreens, Parinya Chakartnarodom, Kanyarat Munmani, Sureerat Polsilapa, Duangrudee Chaysuwan, Wichit Prakaypan, Passakorn Sonprasarn, Edward Laitila, Nuntaporn Kongkajun Jan 2026

Effect Of Garnet Incorporation On The Functional Properties Of Sunscreens, Parinya Chakartnarodom, Kanyarat Munmani, Sureerat Polsilapa, Duangrudee Chaysuwan, Wichit Prakaypan, Passakorn Sonprasarn, Edward Laitila, Nuntaporn Kongkajun

Journal of Metals, Materials and Minerals

Garnet, a silicate mineral, was investigated as a replacement for the TiO2-based compound in sunscreen formulations. Samples containing garnet were evaluated for color shade, viscosity, sun protection factor (SPF), and water resistance. Substituting the TiO2-based compound with garnet reduced both viscosity and SPF but markedly enhanced water resistance. This improvement is attributed to the physical reinforcement provided by garnet particles, which strengthen the sunscreen film and reduce wash-off under water exposure. Garnet incorporation also altered the product’s appearance from white to a darker brownish-beige tone, improving visual compatibility with a wider range of skin tones.

Go to article

Synthesis And Photoluminescence Properties Of Graphene Quantum Dots Prepared Via Carbonization Under Pressure Reduction, Sutthipoj Wongrerkdee, Pichitchai Pimpang Jan 2026

Synthesis And Photoluminescence Properties Of Graphene Quantum Dots Prepared Via Carbonization Under Pressure Reduction, Sutthipoj Wongrerkdee, Pichitchai Pimpang

Journal of Metals, Materials and Minerals

This study reports the synthesis of graphene quantum dots (GQDs) via a bottom-up carbonization approach using citric acid as a precursor under various reduced pressure conditions. The carbonization process was carried out at 250℃ in an ethanol medium, with atmospheric pressures ranging from normal to 20 inHg below atmospheric pressure. The effects of pressure reduction on the size and optical properties of GQDs were systematically investigated. Dynamic light scattering (DLS), UV–Vis spectroscopy, and fluorescence spectroscopy revealed that pressure reduction during synthesis decreased GQDs size and induced a blue-shift in both absorption and emission spectra. The optical bandgap of GQDs was …

Go to article

Effects Of Welding Currents On Microstructure And Corrosion Behaviors Of Inconel 625 Cladding On 2.25cr-1mo Steel By Hot-Wire Tig, Supparat Saeheng, Hein Zaw Oo, Prapas Muangjunburee Jan 2026

Effects Of Welding Currents On Microstructure And Corrosion Behaviors Of Inconel 625 Cladding On 2.25cr-1mo Steel By Hot-Wire Tig, Supparat Saeheng, Hein Zaw Oo, Prapas Muangjunburee

Journal of Metals, Materials and Minerals

Hot-wire tungsten inert gas (HW-TIG) cladding has been applied to the steam turbine rotor welding repair. This study investigated the effects of welding currents on microstructure, hardness, and corrosion behavior. The experiments were conducted using four different welding currents applied to bead-on-plate Inconel 625 welds on a 2.25Cr-1Mo steel substrate as the steam turbine rotor material. The selected welding currents were 125 A, 150 A, 175 A, and 200 A. The percentages of weld dilution for different welding currents were also evaluated. Higher welding currents increased weld dilution, weld bead width, and HAZ size. As the welding current increased, the …

Go to article

Development Of 4-Vinylbenzyl Chloride (Vbc) Grafted Onto Branched Polyethylenimine (Pei) Onto Bacterial Cellulose Sheet By Gamma-Induced Irradiation Technique For Cu Ion Adsorption, Methinee Wongwai, Supitchaya Kulratkitiwong, Thitirat Rattanawongwiboon, Sarute Ummartyotin Jan 2026

Development Of 4-Vinylbenzyl Chloride (Vbc) Grafted Onto Branched Polyethylenimine (Pei) Onto Bacterial Cellulose Sheet By Gamma-Induced Irradiation Technique For Cu Ion Adsorption, Methinee Wongwai, Supitchaya Kulratkitiwong, Thitirat Rattanawongwiboon, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

Bacterial cellulose extracted and purified from Nata de coco was employed as a platform for Cu2+ ion adsorption. 4-vinylbenzyl chloride (VBC) was successfully grafted at the hydroxyl position by using gamma irradiation. The optimum was typically related to VBC concentration of 2% (v/v) and a radiation dose of 50 kGy. FTIR significantly reported the functional group of C-Cl related to VBC. No change of crystallinity and morphology was observed. The thermal decomposition was stable up to 200℃. The modification of branched polyethylenimine (PEI) was prepared in order to change the functionality to N‒H stretching. This was expected to adsorb Cu2+ …

Go to article

High Temperature Storage Reliability Of Cu Pillar Flip Chip Interconnects, Kachain Worapakdee, Anusara Srisrual Jan 2026

High Temperature Storage Reliability Of Cu Pillar Flip Chip Interconnects, Kachain Worapakdee, Anusara Srisrual

Journal of Metals, Materials and Minerals

The Cu pillar flip chip is currently designed and used in the optic communication device that it has exhibited low reliability at high temperature. This paper aims to report the reliability of Cu pillar flip chip assembled on electronics board for a new optoelectronic product subjected to high temperature storage testing. The test was performed at 150℃ isothermal condition with the various storage times up to 2000 h. The aged samples were characterized with scanning acoustics microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Two types of intermetallic compounds (IMCs) were found at beside of the Cu pillar i.e. …

Go to article

First Prev Next Last