Engineering Education Commons^™

Difficulty As A Concept Inventory Design Consideration: An Exploratory Study Of The Concept Assessment Tool For Statics (Cats), Dana L. Denick

Open Access Dissertations

The ability for engineering students to apply mathematic, scientific and engineering knowledge to real-life problems depends greatly on developing deep conceptual knowledge that structures and relates the meaning of underlying principles. Concept inventories have emerged as a class of tests typically developed for use in higher education science and engineering courses. Concept Inventories (CIs) are multiple-choice tests that are designed to assess students' conceptual understanding within a specific content domain. For example, the CI explored within this study, the Concept Assessment Tool for Statics (CATS) is intended to measure students' understanding of the concepts underlying the domain of engineering statics. …

An Investigation Of The Impact Of A Flipped Classroom Instructional Approach On High School Students' Content Knowledge And Attitudes Toward The Learning Environment, Matthew R. Bell

Theses and Dissertations

The idea of the “flipped classroom” is a relatively new concept in education that has become increasingly popular. Instructors who flip their classrooms reverse the roles of school work and homework by recording video lectures for students to watch before coming to class. Students then work on their homework in the classroom while the instructor is present to help them. Very little research has been done on the effectiveness of the flipped classroom to determine if students can perform better on exams by learning in a flipped classroom environment, especially for high school demographics. The purpose of this research is …

Sci Pop Talks! Presenter Guidelines, Kiyomi D. Deards, Raychelle Burks

University of Nebraska-Lincoln Libraries: Faculty Publications

Presenter guidelines for the nUniversity of Nebraska-Lincoln (UNL) Sci Pop! Talks series.

Reflections On Interdisciplinary Sustainability Research With Undergraduate Students, Can B. Aktas

Civil Engineering Faculty Publications

Purpose – The purpose of the article was to convey experiences with pioneering interdisciplinary sustainability research by involving undergraduate students. Experiences with initiating and conducting multiple research projects spanning engineering and sustainability are described, and recommendations for programs and faculty in other institutions of higher education that plan to implement or support similar endeavors are discussed. Design/methodology/approach – The article and presented conclusions are based on three separate research projects, where specific examples as to how those projects were developed as well as challenges and rewards faced during the project are described. Findings – It is concluded that faculty should …

Graduate School Of Engineering And Management Catalog 2015-2017, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Strategies To Enhance Learning In A Large Engineering Economics Course: Including Students’ Perceived Values In The Instructional Redesign Process, Kellie S. Grasman, D. Cernusca

Engineering Management and Systems Engineering Faculty Research & Creative Works

Purposeful implementation of technology in instructional design presents opportunities to increase institutional efficiency while simultaneously improving instructional quality. This paper presents findings from the implementation of a hybrid/buffet approach in an undergraduate Engineering Economics large course. A Design-Based Research (DBR) approach informed the instructional redesign and measured its effectiveness through multiple iterations, or macro-cycles, of implementation. Overall, pedagogical structure and specific technology solutions applied to each course component are described, as well as preliminary measures of effectiveness and student perception from a pilot offering of the hybrid/buffet course. Encouraged by positive preliminary results, a second implementation informed further study of …

Engaging Community College Students Using An Engineering Learning Community, James Maccariella Jr.

Educational Leadership & Workforce Development Theses & Dissertations

The study investigated whether community college engineering student success was tied to a learning community. Three separate data collection sources were utilized: surveys, interviews, and existing student records. Mann-Whitney tests were used to assess survey data, independent t-tests were used to examine pre-test data, and independent t-tests, analyses of covariance (ANCOVA), chi-square tests, and logistic regression were used to examine post-test data. The study found students that participated in the Engineering TLC program experienced a significant improvement in grade point values for one of the three post-test courses studied. In addition, the analysis revealed the odds of fall-to-spring retention were …

Poll Everywhere! Even In The Classroom: An Investigation Into The Impact Of Using Polleverwhere In A Large-Lecture Classroom, Wendi M. Kappers, Stephanie L. Cutler

Publications

Over the past several years, there has been a call in higher education to move from traditional lecturing to a more active classroom. However, many faculty members face multiple challenges when attempting to make a large lecture (over 100 students) an active learning environment. One way researchers have suggested engaging a large lecture is through Concept Tests and Peer Instruction, which can require additional resources to be purchased by students, such as electronic response systems or "clickers." This study will investigate the applicability of utilizing the free software PollEverywhere, which can be accessed using student cell phones (Text messages and …

Capstone Interdisciplinary Team Project: A Requirement For The Ms In Sustainability Degree, Latif M. Jiji, Irvin Sam Schonfeld, George A. Smith

Publications and Research

Purpose – This paper aims to describe experience gained with a required six-credit year-long course, the Capstone Interdisciplinary Team Project, a key component of the Master of Science (MS) in Sustainability degree at the City College of New York. A common feature of sustainability problems is their interdisciplinary nature. Solutions to sustainability problems often require professionals with different training and backgrounds to work as a team. A sustainability curriculum should provide students with the skills needed to competently participate in an interdisciplinary team.

Design/methodology/approach – Instructors drawn from different departments and divisions of the college developed a pool of sustainability-focused …

Grassroots Or Returning To One’S Roots? Unpacking The Inception Of A Youth-Focused Community Makerspace, Victor R. Lee, Whitney L. King, Ryan Cain

Instructional Technology and Learning Sciences Faculty Publications

In this paper, we describe the individuals and factors contributing to the emergence of a community makerspace in a small city in the United States. As research into how makerspaces have come into existence is still in a nascent stage, this single case study is intended to describe and highlight some of the complexities involved in creating such a facility. Based on analysis of onsite observations, interviews of adults connected with the space, and electronic communications, we present a story of how two co-founders of a youth-focused makerspace went from having initial interest in extracurricular activities for their own children …

Design And Comparison Of Immersive Interactive Learning And Instructional Techniques For 3d Virtual Laboratories, Shuo Ren, Frederic D. Mckenzie, Sushil K. Chaturvedi, Ramamurthy Prabhakaran, Jaewan Yoon, Petros J. Katsioloudis, Hector Garcia

Computational Modeling & Simulation Engineering Faculty Publications

This work presents the design, development, and testing of 3D virtual laboratories for practice, specifically in undergraduate mechanical engineering laboratories. The 3D virtual laboratories, implemented under two virtual environments3DTV and Computer Automated Virtual Environment (CAVE)serve as pre-lab sessions performed before the actual physical laboratory experiment. The current study compares the influence of two instructional methods (conventional lecture-based and inquiry-based) under two virtual environments, and the results are compared with the pre-lab sessions using a traditional paper-based lab manual. Subsequently, the evaluation is done by conducting performance and quantitative assessments from students pre-and post-laboratory performances. The research results demonstrate that students …

Sola Gratia: Grace In The Engineering Curriculum And Profession, Ethan Brue

Faculty Work Comprehensive List

Integral Christian higher education is in vogue. Most Christian institutions of higher education who take their mission seriously make the claim that the education offered to students is one where faith and learning are not separate. It is a belief that their entire educational enterprise is inexorably tied in some way, shape, or form to our new life in Christ. Most engineering programs on Christian campuses are the outgrowth of this perspective. Over the last fifty years, numerous philosophers, writers, scientists, and engineers have developed a solid foundation from which engineering can be understood as an essential calling in the …

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Evaluation Of Static Vs. Dynamic Visualizations For Engineering Technology Students And Implications On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

The benefit of using static versus dynamic visualizations is a controversial one. Few studies have explored the effectiveness of static visualizations to those of dynamic visualizations, and the current state of the literature remains somewhat unclear. During the last decade there has been a lengthy debate about the opportunities for using animation in learning and instruction. More specifically it has been shown that dynamic visualizations often provide no advantages over static visualizations. If they had shown advantages, it was due to the fact that more information was available in the animated than in the static version. Given this result, the …

Integration Of Mechatronics Design Approach Into Teaching Of Modeling Practices, Vukica M. Jovanovic, Tatiana V. Goris, Ana M. Djuric, Petros J. Katsioloudis, Nathan J. Luetke, Moustafa R. Moustafa, Basim Matrood

Engineering Technology Faculty Publications

Engineering design has transformed significantly due to advances in embedded system design and computer technologies. Almost every mechanical design today has some electrical and electronic components. Many products manufactured today contain both electrical and mechanical components and systems. Mechatronics is a design process that is multi-disciplinary in nature and integrates principles of many engineering disciplines including, but not limited to, mechanical engineering and mechanical engineering technology, electrical engineering and electrical engineering technology, and controls engineering. Mechatronic systems can be found in many different places today. These range from computer hard drives and robotic assembly systems, to washing machines, coffee makers, …

Teacher Influence On Elementary School Students’ Participation In Science, Technology, Engineering, And Mathematics, Courtney Hartman

Honors College Theses

The purpose of this study is to explore the influence of elementary school teachers on encouraging students’ interest and participation in Science, Technology, Engineering, and Mathematics. The researcher sought to understand what methods teachers use in their classrooms to encourage students to participate in STEM subjects and programs. This mixed methods study consisted of a questionnaire to collect quantitative data, as well as an interview of selected teachers who participated in the questionnaire to collect qualitative data. The data was analyzed to determine the overall perceptions of teachers regarding the importance of encouraging students to participate in STEM. The qualitative …

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …

High And Low Computer Self-Efficacy Groups And Their Learning Behavior From Self-Regulated Learning Perspective While Engaged In Interactive Learning Modules, Harry B. Santoso, Oenardi Lawanto, Kurt Becker, Ning Fang, Edward M. Reeve

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of this research was to investigate high school students’ computer self-efficacy (CSE) and learning behavior in a selfregulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesizes that CSE is reflected on cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. Two research questions guided this research: (1) how is students’ CSE while engaged in interactive learning modules? and (2) how do high and low CSE groups plan and monitor their cognitive action, and regulate their monitoring strategies based on their CSE level? The research used a mixedmethods approach to …

Gender Differences In The Consistency Of Middle School Students’ Interest In Engineering And Science Careers, Marsha Ing, Pamela R. Aschbacher, Sherry M. Tsai

Journal of Pre-College Engineering Education Research (J-PEER)

This longitudinal study analyzes survey responses in seventh, eighth, and ninth grade from diverse public school students (n = 482) to explore gender differences in engineering and science career preferences. Females were far more likely to express interest in a science career (31%) than an engineering career (13%), while the reverse was true for males (58% in engineering, 39% in science). After controlling for student and school demographic characteristics, females were as consistent as males in their science career interests during the three years of the study but less consistent in their engineering career interests. Knowing an engineer significantly …

Using Design Hierarchy In A Linear Circuits Class To Illustrate The Scientific Method As A Human Invention, Douglas Deboer

Faculty Work Comprehensive List

There are various ways to classify academic studies. One might make a “two cultures” division, separating academic studies into the humanities and sciences. Or one might have three divisions: humanities, social sciences, and natural sciences. Or one might choose to classify academic studies along the lines of traditional academic disciplines such as theology, law, art, music, economics, social studies, languages, political studies, history, psychology, biology, physics, chemistry, math, etc. In our era of global commerce, where does engineering fit in these types of classification? What should engineers study? In a 2008 presidential debate, candidate Barack Obama said that, “Ensuring that …

Engineering Design: A Cognitive Process Approach, Greg Joseph Strimel

STEMPS Theses & Dissertations

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. …

Leveraging Students’ Passion And Creativity: Ethos At The University Of Dayton, Margaret Pinnell, Malcolm Daniels, Kevin P. Hallinan, Gretchen Berkemeier

Mechanical and Aerospace Engineering Faculty Publications

The Engineers in Technical Humanitarian Opportunities of Service-learning (ETHOS) program was developed in the spring of 2001 by an interdisciplinary group (electrical, chemical, civil and mechanical) of undergraduate engineering students at the University of Dayton (UD). ETHOS was founded on the belief that engineers are more apt and capable to appropriately serve our world if they have an understanding of technology’s global linkage with values, culture, society, politics, and the economy. Since 2001, the ETHOS program at UD has grown and changed.

From conceptualization, to implementation, to maturation and national recognition, the program has addressed challenges of academic acceptance, programmatic …

Integrating Cognitive Science With Innovative Teaching In Stem Disciplines, Mark A. Mcdaniel, Regina F. Frey, Susan M. Fitzpatrick, Henry L. Roediger Iii

Books and Monographs

This volume collects the ideas and insights discussed at a novel conference, the Integrating Cognitive Science with Innovative Teaching in STEM Disciplines Conference, which was held September 27-28, 2012 at Washington University in St. Louis. With funding from the James S. McDonnell Foundation, the conference was hosted by Washington University’s Center for Integrative Research on Cognition, Learning, and Education (CIRCLE), a center established in 2011. Available for download as a PDF. Titles of individual chapters can be found at http://openscholarship.wustl.edu/circle_book/.

20140827.5: Engineering Office, 1952-1971, College Of Information Technology And Engineering

Guides to University Archives

These items include materials from the College of Information Technology and Engineering at Marshall University from 1952-1971. Items were received in 2014 and include notable materials about the history of Engineering at Marshall, including training for engineering students, library holdings, the Engineering curriculum report from 1962, samples of student work within Engineering, and the Citizens Committee for presentation and improvement of Engineering from 1972. This is not an exhaustive list. Please download the finding aid for a full list of contents.

Visualizing Mechanics: Educational Videos Demonstrating Core Mechanics Concepts, Camilo Schrader, Jeffrey Rhoads, Charles M. Krousgrill, Stephen Alex Stamm, Elizabeth Bushman

The Summer Undergraduate Research Fellowship (SURF) Symposium

There has been an increased interest in using technology to relay information over the past 20 years. This interest has been reflected in the way the internet has expanded to incorporate nearly-uncountable numbers of blogs, streaming videos, and discussion forums. Recent research has shown that younger generations of students prefer internet-based platforms such as these to communicate and learn, as they are congruent with a visual style of learning. The present study seeks to fuse the predominantly reflective and intuitive methods found in a traditional lecture with the more visual and active modes of learning to provide a larger range …

Large Research Center Education And Outreach: Lessons From 5 Years Of Distributed Collaborative Design, Development And Implementation, Sean Brophy, Thalia Anagnos

Faculty Publications

Paper from the 121st ASEE Annual Conference, Indianapolis. The George E. Brown, Jr. Network for Earthquake Engineering Summation (NEES) completes its tenth year of operation in September 2014. The NEES Center consists of a network of 14 large-scale experimental laboratories that collaborate and share resources in support of research to inform civil engineering practice and reduce losses from future earthquakes. Since the development of the center in 2003, the education, outreach and training (EOT) program has grown from a federation of local outreach activities to an integrated network of “specialists” working together to obtain significant impact towards defined education goals. …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

Materials Science and Engineering Faculty Publications and Presentations

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Ethical Reasoning Development In Project-Based Learning, Elizabeth Pluskwik, Puteri S. Megat Hamari

Integrated Engineering Department Publications

This paper will describe the method of ethics instruction in a specific project-based learning program with the aim to improve the current level of moral reasoning skills in the engineering students enrolled in the program. The Accreditation Board for Engineering and Technology (ABET) and the National Society of Professional Engineers (NSPE) have endorsed efforts to improve the teaching of ethics in the engineering curriculum. Criterion 3-f of the ABET outcomes,specifically calls for student attainment of an understanding of ethical and professional responsibility. In response, engineering educators seek to develop curriculum to improve moral reasoning skills, which should lead to increased …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Higher education research

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Spatial Visualization Ability And Impact Of Drafting Models: A Quasi Experimental Study, Petros J. Katsioloudis, Vukica Jovanovic

STEMPS Faculty Publications

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of different visual models - a 3D printed solid object, a 3D computer generated drawing and a 2D drawing.