Engineering Education Commons^™

Engineering Design And Gifted Pedagogy, Eric L. Mann, Rebecca L. Mann

Faculty Publications

No abstract provided.

Using Wii Technology And Experiential Learning To Teach Newtonian Mechanics To Rural Middle School Students, Joseph S. Dvorak, Tanya C. Franke-Dvorak, Shane Neel

Biosystems and Agricultural Engineering Faculty Publications

This study looked at the effects of an experiential learning activity using the accelerometer in the Wii Remote to teach basic concepts of Newtonian mechanics, e.g., acceleration, to middle school students in a rural school district. A major prerequisite for students at the mid-level in biosystems engineering programs is that they have a good knowledge of basic science, including physics. Education in these concepts must begin before college, such as at the middle school level. Improvements in science education are vitally necessary to achieve essential learning outcomes for middle school students in the U.S. and to prepare these students for …

Application Of Visual Cues On 3d Dynamic Visualizations For Engineering Technology Students And Effects On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

Several theorists believe that different types of visual cues influence cognition and behavior through learned associations; however, research provides inconsistent results. Considering this, a quasi-experimental study was done to determine if there are significant positive effects of visual cues (color blue) and to identify if a positive increase in spatial visualization ability for students in engineering technology courses is observed. According to the results of this study it is suggested that the use of the specific visual cue (color blue) provides no statistically significant higher scores versus the treatment that did not utilize any visual cues.

Simulation To Application. The Use Of Computer Simulations To Improve Real-World Application Of Learning, Wendi M. Kappers, Stephanie L. Cutler

Publications

Simulations have been used in training and education for years to aid students in gaining the skills needed to complete a task in a low risk environment. However, students can have trouble connecting the skills used in the simulated working environments to skills that are needed to be applied in the real-world environment, referred to as adaptive transfer. The simulations referred to in this study are simulated environments that mirror students kill application, not a simulation of an event that is meant to aid students in the development of concept knowledge around the demonstrated event. This study examines students' ability …

Comparing High School Students' And Adults' Perceptions Of Technology, Henry L. (Hal) Harrison Ii, Philip A. Reed

STEMPS Faculty Publications

This study compared high school student’s perceptions of technology and technological literacy to those perceptions of the general public. Additionally, individual student groups were compared statistically to determine significant differences between the groups. The ITEA/Gallup Poll instrument was used to survey high school student’s perceptions of technology in the study. The student population in question consisted of three subgroups: students enrolled in a standards-based technology education courses, students enrolled in a Project Lead the Way (PLTW) Principles of Engineering pre-engineering course, and students enrolled in a general education course (language arts, mathematics, or science). In addition, each student group’s perceptions …

Pilot Programs For Veterans Transition To Engineering Fields, Vukica M. Jovanovic, Anthony W. Dean, Carol L. Considine, Karina Arcaute, Petros Katsioloudis, Mileta Tomovic, Thomas B. Stout, Connor Schwalm, Jennifer G. Michaeli, Yuzhong Shen

Engineering Technology Faculty Publications

Veterans, through their active service, frequently receive training in highly skilled technical areas. However, they may lack a theoretical background in underlying engineering principles. They also need additional support with the transition from a highly structured military environment to an environment with more ambiguous time constraints and different sorts of responsibilities. Moreover they are facing challenges which are specific for their student population. Therefore, enabling multiple mechanisms which would support them and provide them necessary guidance are especially important at universities with large veteran populations such as at Old Dominion University in Norfolk, Virginia. Hence, there is a need for …

An Asynchronous Course/Laboratory Development For Automation Controls, Cheng Y. Lin, Mileta Tomovic, Vukica M. Jovanovic

Engineering Technology Faculty Publications

The development of asynchronous courses is to help students who are restricted by work requirements, family responsibilities, geographical distance, disabilities, and combination of these factors. It also provides flexibilities to on-campus students. In this paper, the framework structure of an asynchronous course and laboratory development for an automation control is presented. The challenge in this development is to implement the hands-on laboratory experience to those distance learning students who may not be able to access the real equipment. Results of the implementation including opinion feedbacks and grade distributions show that students welcome the format of this development.

A Spiral Computer Engineering Lab Framework, Pong P. Chu, Chansu Yu, Karla Hamlen-Mansour

Electrical and Computer Engineering Faculty Publications

This development establishes a “spiral” lab framework, in which the key concepts are revisited at increasing levels of sophistication and interconnection, for Computer Engineering curriculum. The development is addressing a serious deficiency – lack of integration skill – in engineering curriculum. The framework connects and integrates the individual courses through a coherent sequence of lab experiments and projects across the entire curriculum. These lab experiments and projects are designed to illustrate and reinforce key theoretical concepts and their complexities and abstraction levels gradually grow as students progress through the curriculum. The framework is based in three cohesive themes: video, audio, …

Embedding Online Based Learning Strategies Into The Engineering Technology Curriculum, Vukica M. Jovanovic, Otilia Popescu, Orlando M. Ayala, Mileta Tomovic, Alok K. Verma

Engineering Technology Faculty Publications

Various blended learning strategies have been implemented at engineering technology programs to facilitate different learning styles and different time constraints given to faculty. Some of these efforts are related to the effective use of online tools such as online course management systems, ePortfolios, narrated presentations, web-based polling systems, tutorials and educational materials posted before the class and asynchronous learning methods. As technology changes, some of the online learning methods are getting more advanced which is enabling more innovative approaches and data compression. Various distance learning programs started with having access to videos of recorded lectures (on VHS tapes, or CDs) …

Use Of Dynamic Visualizations For Engineering Technology, Industrial Technology, And Science Education Students: Implications On Ability To Correctly Create A Sectional View Sketch, Petros J. Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred V. Jones

Engineering Technology Faculty Publications

Spatial abilities, specifically visualization, play a significant role in the achievement in a wide array of professions including, but not limited to, engineering, technical, mathematical, and scientific professions. However, there is little correlation between the advantages of spatial ability as measured through the creation of a sectional-view sketch between engineering technology, industrial technology, and science education students. A causal-comparative study was selected as a means to perform the comparative analysis of spatial visualization ability. This study was done to determine the existence of statistically significant difference between engineering technology, industrial technology, and science education students’ ability to correctly create a …

Introducing Writing Assignments In Engineering Technology Courses To Enhance Technical Writing Skills And Critical Thinking, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

This study was prompted by the university wide initiative to improve students' technical writing skills across-the-curriculum by introducing low stakes writing assignments as early as in their freshman year. Effective written communication skills are important for engineering education, with critical thinking being one of the most important aspects of the learning process at the college level. However, the efforts in required core curriculum English and communication courses are not always further integrated into engineering curriculum. Introducing a technical paper writing assignment in lower division engineering courses had the purpose of helping students to be better prepared for major writing assignments …

Developing A Student Learning Strategy To Bridge Virtual Learning And Hands-On Activity, Gon Namkoong, Hargsoon Yoon, Yonghee Suh

Electrical & Computer Engineering Faculty Publications

This paper addresses the effectiveness of combined virtual and physical hands-on activities in students’ learning which was infused in the capstone senior design project. Senior design projects are open-ended and are similar to the research that scientists perform toward a more comprehensive understanding of nature or new scientific knowledge. As a reinforced learning methodology to greatly assist students’ reasoning and problem-solving skills, virtual learning was first integrated at the planning stage of their projects. This approach is in contrast with the typical senior design courses where only limited resources are available for planning experiments. Using virtual learning, students are able …

Students' Perception Of The Flipped Classroom In Graphical Communications, Lulu Sun

Publications

The flipped classroom requires students to study concepts before the class, apply what they learn in the classroom, and work with other students, which then makes it possible to get immediate feedback from the instructor. However, the student’s perception of the flipped classroom is not widely investigated in the area of engineering graphics. This paper presents a study of the flipped classroom in a Graphical Communications course. Students are required to study course material online before the face-to-face classroom experience. The online course study includes multimedia materials and an online quiz that they are required to take. The results of …

Implementation And Evaluation Of A Second Language Acquisition-Based Programming Course, Christina Frederick, Lulu Sun, Caroline Liron, Matthew A. Verleger, Rachel Cunningham, Paula S. Espejo

Publications

This paper describes initial findings of an NSF funded project under the Research Initiation Grant in Engineering Education (RIGEE) program. The RIGEE program is a multidisciplinary program focused on developing innovative, implementing and assessing innovative programs that enhance engineering education. The project applied theory and methods of second language acquisition (SLA) to teach an introductory programming course in engineering. The project is a two year long project implemented in multiple sections of an introductory programming class at a technological university, and assessed throughout implementation. It included a component whereby student assistants participated in project development and implementation, and were mentored …

Quantifying The Information Habits Of High School Students Engaged In Engineering Design, Nathan Mentzer, Michael J. Fosmire

Journal of Pre-College Engineering Education Research (J-PEER)

stract This study measured the information gathering behaviors of high school students who had taken engineering design courses as they solved a design problem. The authors investigated what types of information students accessed, its quality, when it was accessed during the students’ process, and if it impacted their thinking during the activity. Students overwhelmingly relied on internet searching to acquire information, rather than printed materials available to them. The sites they found were generally popular rather than technical, and persuasive (i.e., trying to sell something) rather than informative. The high school students understood the need for information, as they sought …

Effect Of An Engineering Camp On Students’ Perceptions Of Engineering And Technology, Rebekah Hammack, Toni A. Ivey, Juliana Utley, Karen A. High

Journal of Pre-College Engineering Education Research (J-PEER)

Students’ knowledge about a profession influences their future decisions about careers. Research indicates that students tend to hold stereotypical views of engineers, which would hinder engineering as a career choice. The purpose of this study was to measure how participating in a week long engineering summer camp affected middle school students’ (N519) attitudes towards engineering and their conceptions of engineering and technology. Results indicate that participation in the programs had a positive impact on the students’ understandings of what technology is and the work engineers do. Although the results indicate a positive impact on participants, it is not clear which …

Teacher Beliefs About Motivating And Teaching Students To Carry Out Engineering Design Challenges: Some Initial Data, James P. Van Haneghan, Susan A. Pruet, Rhonda Neal-Waltman, Jessica M. Harlan

Journal of Pre-College Engineering Education Research (J-PEER)

The present study examines middle school teachers’ beliefs about seven learning outcomes related to a project that involves developing and examining the effects of a set of engineering design modules constructed for use by middle school math and science teachers. Overall, the teachers involved in the intervention appear to believe they have the instructional skills, professional development, and resources to carry out the modules. Teachers from all of the schools (both intervention and comparison schools) for the most part valued the outcomes as important. Results of the study indicate that, although teachers believe they value and can obtain most of …

Iron Range Engineering Pbl Experience, Ron Ulseth, Bart Johnson

Integrated Engineering Department Publications

A new PBL model started in 2010 in Minnesota, United States. The PBL model is upper-division (the last two years of four-year bachelor’s of engineering degree). Entering students are graduates of Minnesota’s community colleges. The Aalborg PBL model served as an inspiration for the program’s development. Unique attributes of the program include industry clients, semester-long projects, emphasis on development of self-regulated learning abilities, dedicated project rooms, technical competence learned in one-credit, small (3-4 student) groups with one academic staff called learning competencies, and an emphasis on continuous improvement. The program has earned ABET accreditation. Seventy-five students have graduated and are …

Professional Competency Development In A Pbl Curriculum, Bart Johnson, Ron Ulseth

Integrated Engineering Department Publications

Substantial dialogue exists regarding the needs of the engineering profession and the changes in engineering education necessary to meet them. Important to this change is an increased emphasis on the professional competencies as identified by the Washington Accord and the ABET professional skills for engineering graduates and how to educate for them. This paper will explore the potential for a project based learning engineering curriculum model to meet this need. It will summarize a newly developed upper-division undergraduate project-based learning (PBL) engineering program in the U.S. engineering educational system and its approach to professional competency development. Based on the ABET …

Priming Middle School Females’ Engagement In Engineering And Technology, Mary Bonk Isaac

STEMPS Theses & Dissertations

The purpose of this study was to validate data collected between 2009-2013 via an instrument used to assess middle school girls’ identification with and interest in engineering and technology following the Society of Women Engineers’ WOW events. Recognizing the importance of measuring the impact of such mentored E & T activities on young females’ attitudes about and interest in STEM, and more specifically, engineering and technology, SWE outreach experts developed a participant survey based on event objectives and domain knowledge, but never rigorously examined whether it produced statistically valid data that could be used to draw inferences about girls’ propensity …

A Developmental Model Of Research Mentoring, Renata A. Revelo, Michael Loui

School of Engineering Education Faculty Publications

We studied mentoring relationships between undergraduate and graduate students in a summer undergraduate research program, over three years. Using a grounded theory approach, we created a model of research mentoring that describes how the roles of the mentor and the student can change. Whereas previous models of research mentoring ignored student roles and treated mentor roles as static, our model focuses on the development of the mentoring relationship over time. Our model explains how conflicts can occur if the mentor role does not match the maturity level of the student.

Leading Large-Scale Change In An Engineering Program, Cheryl Allendoerfer, Rebecca Bates, Jennifer Karlin, Ron Ulseth, Dan Ewert

Integrated Engineering Department Publications

While many efforts have been made to improve technical and professional skills in engineering graduates, there has been little comprehensive change in the pedagogy of most engineering education institutions in the U.S. Many of these efforts involve changing only one or two aspects of the curriculum, and therefore are less likely to make significant changes in the student learning outcomes. For better success, engineering curricular changes will need to address the entire education system. In order to see real, sustainable improvement in engineering education practice, both the behaviors of the participants and the systems within which these participants act must …

Virtual Peer Teams: Connecting Students With The Online Work Environment, Thalia Anagnos, Alicia Lyman-Holt, Sean Brophy

Faculty Publications

This study examined the potential of online collaboration tools to develop team cohesiveness and research skills of undergraduates participating in Virtual Peer Teams (VPTs) in a geographically distributed research experience for undergraduates (REU). The VPTs mimic geographically dispersed virtual teams that are now common in industry. VPTs consisted of four to six students from multiple REU sites around the United States who were asked to experiment with various collaboration and social network technologies to complete specified research-based and social tasks. Surveys were used to collect formative and summative feedback. Students agreed their VPT experiences were significant in their professional development …

Evolution Of A First-Year Engineering Course, Noah Salzman, Janet Callahan, Gary Leroy Hunt, Carol Sevier, Amy J. Moll

Electrical and Computer Engineering Faculty Publications and Presentations

The first-year engineering course at Boise State University has evolved significantly over the past decade as a result of continuous improvement with a particular focus on student retention. The course was originally created in 1999-2001 as an “Introduction to Engineering” course in order to recruit students to one of the fields of engineering, by introducing those fields of engineering as topics across the semester. Over the first ten years, the course continued that introductory-to-field focus while also introducing a significant design element solving openended engineering problems. As a result of a five-year grant aimed toward improving first-year retention, the first-year …

Work Integrated Learning In Stem In Australian Universities: Final Report: Submitted To The Office Of The Chief Scientist, Daniel Edwards, Kate Perkins, Jacob Pearce, Jennifer Hong

Higher education research

The Australian Council for Educational Research (ACER) undertook this study for the Office of the Chief Scientist (OCS). It explores the practice and application of Work Integrated Learning (WIL) in STEM, with a particular focus on natural and physical sciences, information technology, and agriculture departments in Australian universities. The project involved a detailed ‘stocktake’ of WIL in practice in these disciplines, with collection of information by interview, survey instruments, consultation with stakeholders and literature reviews. Every university in Australia was visited as part of this project, with interviews and consultation sessions gathering insight from more than 120 academics and support …

The Use Of Polleverywhere In Engineering Technology Classes To Student Stimulate Critical Thinking And Motivation, Otilia Popescu, Laura C. Chezan, Vukica M. Jovanovic, Orlando M. Ayala

Engineering Technology Faculty Publications

Critical thinking is considered one of the most important aspects of the learning process at the college level, especially in the field of engineering technology. However, developing critical thinking can prove to be quite challenging. It takes a lot of instructional effort and support for undergraduate students enrolled in engineering technology programs to develop the ability to analyze, adequately synthesize conceptual knowledge, and then apply that knowledge to practical problem-solving situations. This ability is a critical component of any successful completion of job responsibilities for future engineers. In this study we examine the effectiveness of the web-based polling system Polleverywhere …

Global Technology Experiences For Upper-Division Engineering Students: An Assessment, Patricia Backer, Wenchiang Chung

Faculty Publications

In order for students to thrive in the highly competitive global economy, it is critical for them to develop international perspectives and appreciation. As a result, in 2004, the San Jose State University’s Charles W. Davidson College of Engineering established a one-million-dollar Global Technology Initiative (GTI) program. The mission of the GTI program is to expand students’ horizons about the opportunities and challenges of a global economy, to expose them to global, environmental, and energy problems in which technology plays a central role, to motivate their learning of global issues and different cultures, and to introduce them to a more …

Ensc 300 (Energy Seminar) Annotated Bibliography, Supplementary Reading, Adam Liska

Adam Liska Papers

Innovation
Sociology of Innovation, Business, & Work
Sustainable Business Strategy
Leadership
Science, Engineering, & Business History
Economics
Energy, Business, & Environmental Policy
Climate Change & Insurance
Education
Ethics

62 monographic resources

Math, Science, And Engineering Integration In A High School Engineering Course: A Qualitative Study, Clara G. Valtorta, Leema K. Berland

Journal of Pre-College Engineering Education Research (J-PEER)

Engineering in K-12 classrooms has been receiving expanding emphasis in the United States. The integration of science, mathematics, and engineering is a benefit and goal of K-12 engineering; however, current empirical research on the efficacy of K-12 science, mathematics, and engineering integration is limited. This study adds to this growing field, using discourse analysis techniques to examine whether and why students integrate math and science concepts into their engineering design work. The study focuses on student work during a unit from a high school engineering course. Video data were collected during the unit and were used to identify episodes of …

An Extensible Technology Framework For Cyber Security Education, Frank Jordan Sheen

Theses and Dissertations

Cyber security education has evolved over the last decade to include new methods of teaching and technology to prepare students. Instructors in this field of study often deal with a subject matter that has rigid principles, but changing ways of applying those principles. This makes maintaining courses difficult. This case study explored the kind of teaching methods, technology, and means used to explain these concepts. This study shows that generally, cyber security courses require more time to keep up to date. It also evaluates one effort, the NxSecLab, on how it attempted to relieve the administrative issues in teaching these …