Engineering Education Commons^™

An Initial Look At Robotics-Based Initiatives To Engage Girls In Engineering, Jennifer Michaeli, Vukica Jovanovic, Otilia Popescu, Ana Djuric, Ece Yaprak

Engineering Technology Faculty Publications

Over the past 10 years, the use of robotic kits in K-12 Science, Technology, Engineering, and Math (STEM) initiatives as well as undergraduate engineering education has increased significantly. However, a survey of students in grades 9–12 indicated that only 2–3% of women in high school express an intention to study engineering; conversely, 16% of high school men declared that they plan to pursue an engineering degree [1]. In this paper, the authors present an initial review of published literature regarding the use of robotics in schools to identify cases where robotic kits have been used to engage girls in STEM …

Epics: Broadening The Pathway Into Stem, Mindy Hart, Patrice M. Buzzanell, William Charles Oakes, Carla B Zoltowski

ADVANCE-Purdue Gender and STEM Research Symposium

The Engineering Projects in Community Service (EPICS) program was co-founded at Purdue University in 1995 and has since spread throughout the United States and globally with inroads into K-12 education through EPICS High. This presentation offers a synthesis of research findings and interventions gleaned from several datasets about students’ and alumni’s reported experiences with EPICS and the consequences of their participation. In particular, this presentation discusses the ways in which EPICS provides a different vantage point on the underrepresentation of women in STEM (science, technology, engineering, and math). Specifically, researchers have been tackling this issue of underrepresentation for decades with …

Two Bit Circus, Elise Lemle

The Transdisciplinary STEAM+ Journal

Two Bit Circus collaborated with the Girl Scouts of the Greater Los Angeles Area to explore the exciting world of wearable electronics. Over the course of the program, the students explored concepts of introductory electronics while designing and creating their own illuminated fashion piece. The program was held in Montrose, CA in Fall 2013. The students were approximately 10 girls ages seven to 14. The program was held over seven sessions with each session lasting 80 minutes.

Measuring Undergraduate Students’ Engineering Self-Efficacy: A Scale Validation Study, Natasha Johanna A. Mamaril

Theses and Dissertations--Educational, School, and Counseling Psychology

The purpose of this study was to develop and evaluate engineering self-efficacy measures for undergraduate students (N = 321) and to examine whether students' engineering self-efficacy differed by gender, year level, and major. The relationships between engineering self-efficacy and academic achievement and intent to persist in engineering were also investigated. Data from engineering students from two southeastern universities were collected in spring 2013. Exploratory factor analyses resulted in a unidimensional general engineering self-efficacy scale and a three-factor (i.e., research skills, tinkering skills, and engineering design) engineering skills self-efficacy scale. Multivariate analyses of variance revealed that self-efficacy did not differ by …

Graduate School Of Engineering And Management Catalog 2014-2015, Graduate School Of Engineering And Management, Air Force Institute Of Technology

AFIT Documents

The Graduate Catalog represents the offerings, programs, and requirements in effect at the time of publication.

Student Self-Assessment Of Ace 10 Outcomes, Yaşar Demirel

Accreditation Quality Initiative

ACE 10 Question

The ACE Outcome 10 requires students to generate a creative or scholarly product that requires broad knowledge, appropriate technical proficiency, information collection, synthesis, interpretation, presentation, and reflection.

Will the student selfassessment of the extent of attainment of outcomes in a student output improve learning and teaching?

Student Work

Method of Analysis

Student Self-Assessment Survey Form

Findings

Improving ACE 10 Learning

Technology And Engineering Education Doctoral Students' Perceptions Of Their Profession, Gene Martin, John Ritz, Michael Kosloski

STEMPS Faculty Publications

The growth and vitality of both technology and engineering education professions rely on the quality of contributions of its new and emerging leaders. Many of these leaders are currently enrolled students in doctoral programs. These students will be challenged to assume leadership roles in which they are not currently engaged (Ehrenberg, Jakubson, Groen, So, & Price, 2007). Some students may choose to focus their careers in developing new curricula; some will become active in grant writing and grant procurement some will choose to serve as officers in their professional organizations; and others will contribute to the body of literature in …

Improving Enrollment In The Construction Management Graduate Program Through Students’ Perspectives, Mouloud Messaoudi

Master of Technology Management Plan II Graduate Projects

Low enrollment and the decrease in graduation and retention rates are challenges facing the growth of the Master’s in Technology Management – Construction Management (MTM-CM) program at BGSU. In addition, the competition between the universities to enroll and retain more in-state, out-of-state, and international students is aggressive. There is a need for a revaluation for the MTM-CM program in order to attract more students in the future. This study is a necessary step to know what the MTM-CM students think about the product delivered to them at BGSU. There was no prior study investigating the satisfaction level of the construction …

The Importance Of Formative Assessment In Science And Engineering Ethics Education: Some Evidence And Practical Advice, Matthew W. Keefer, Sara E. Wilson, Harry Dankowicz, Michael C. Loui

School of Engineering Education Faculty Publications

Recent research in ethics education shows a potentially problematic variation in content, curricular materials, and instruction. While ethics instruction is now widespread, studies have identified significant variation in both the goals and methods of ethics education, leaving researchers to conclude that many approaches may be inappropriately paired with goals that are unachievable. This paper speaks to these concerns by demonstrating the importance of aligning classroom-based assessments to clear ethical learning objectives in order to help students and instructors track their progress toward meeting those objectives. Two studies at two different universities demonstrate the usefulness of classroom-based, formative assessments for improving …

Comparative Analysis Of Research Priorities For Technology Education, Gene Martin, John Ritz

STEMPS Faculty Publications

This study compares and contrasts the most relevant research priorities identified through two Delphi studies by the authors. The panels of experts used in these studies, an international and a U.S. study group, were asked to identify important topics to guide future research studies for the school subject of technology education. Both panels sought to determine the most relevant issues that need to be researched related to K-12 technology education and preparation for teaching this school subject. This study reports the similarities of research priorities identified by both expert panels, then contrasts the major differences that the groups identified for …

Strategies For Effective Online Course Development, Carol L. Considine, Michael W. Seek, Jon Lester

Engineering Technology Faculty Publications

Old Dominion University's Civil Engineering Technology (CET) program has a successful history of distance education, with more than half of the student population comprised of distance learners. Distance learning delivery has traditionally been via satellite and videostreaming with students having the choice of asynchronous or synchronous options. The university is in the process of updating their distance learning technologies and has encouraged programs to migrate to an online modality of distance learning. Developing and delivering online courses requires different competencies and facilitation skills than video streamed synchronous delivery or face to face instruction. A course delivered online changes the teaching …

Making Design Pedagogical Content Knowledge Visible Within Design Reviews, Robin Adams, David Radcliffe, Tiago Forin, Mel Chua

Design Thinking Research Symposium

Design pedagogical content knowledge (PCK) is the content-specific specialized teacher knowledge that connects the how (pedagogical knowledge) and what (content knowledge) of teaching design. In this study, we make visible the design PCK in three student design reviews: choreography, undergraduate industrial design, and mechanical engineering. We use cognitive apprenticeship and teaching-as-improvisation frameworks to characterize PK, and design judgment, design task strategies, and process management strategies to characterize CK. We identify and describe four patterns of design PCK: scaffolded articulation, driving for meaning and guidance, breaking the 4^th wall to create a teaching moment, and “suggest don’t tell”. Theoretical implications …

Higher Order Thinking In Design Reviews, Craig D. Howard, Colin M. Gray

Design Thinking Research Symposium

In this study we have grappled with how higher order thinking emerges in early stage design reviews, using an undergraduate dyadic review and a graduate review in a small group setting. Narratives, gambits and justifications emerged through a content analysis as forms of higher order thinking common in the reviews. We then mapped these reviews onto common frames of reference employed by teachers and students. Results depicted stark differences in the linguistic routines of the two teachers and two different sets of students. Each focused their higher order thinking from a primarily different frame of reference. Conclusions relate to opportunistic …

Describing Creativity In Design Across Disciplines, Llew Mann, Yasemin Tekmen Araci

Design Thinking Research Symposium

Creativity is an essential aspect of design thinking. Being able to describe creativity and creative processes is important for developing future designers. While much research has been undertaken describing creativity in design, there is very little investigating how creativity and creative thinking varies across disciplines. A coding scheme involving six separate codes was developed initially from the literature, refined and then used to describe how creativity and creative thinking was apparent in the DTRS 10 datasets of Junior Industrial Design, Graduate Industrial Design, Mechanical Engineering, Choreography and Entrepreneurship. Based on this analysis, conclusions on how creativity and creative thinking varied …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Enabling Multidisciplinary Perspective In Student Design Project: Fast Fashion And Sustainable Manufacturing Systems, Vukica M. Jovanovic, Manveer Mann, Petros J. Katsioloudis, Daniel L. Dickerson

Engineering Technology Faculty Publications

Fast fashion retailers are growing faster than any other type of retailer due to their ability to offer trendy low-cost clothing mimicking latest runway trends with turnaround times as low as two weeks. Fueled by short production and distribution lead times, fast fashion retailers combine rapid prototyping, small batches of fashionable product designs, and efficient transportations and delivery. Among others, the methods applied in fast-fashion industry include mass customization and personalization, and lean manufacturing. Current trends in manufacturing lean towards the application of digital and rapid manufacturing methods and increased use of product lifecycle management, knowledge management systems and computer …

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung, John Ritz

Engineering Technology Faculty Publications

Conducting laboratory activities is essential for teaching and learning in engineering and technology subjects. This article discusses explorations made by a research team to find solutions to enable the distance-learning delivery of laboratory courses on embedded microcontroller technology topics. In addition, this article includes a review of videoconferencing and course management tools, uniquely designed laboratory equipment and supporting curriculum materials, and statistical evidence showing students can learn technical laboratory content in distance-learning environments.

Integrating Information Into The Engineering Design Process, Michael Fosmire, David Radcliffe

Purdue University Press Books

Engineering design is a fundamental problem-solving model used by the discipline. Effective problem-solving requires the ability to find and incorporate quality information sources. To teach courses in this area effectively, educators need to understand the information needs of engineers and engineering students and their information gathering habits. This book provides essential guidance for engineering faculty and librarians wishing to better integrate information competencies into their curricular offerings. The treatment of the subject matter is pragmatic, accessible, and engaging. Rather than focusing on specific resources or interfaces, the book adopts a process-driven approach that outlasts changing information technologies.

After several chapters …

An Investigation Of The Asit Problem-Solving Method On Middle School Technology Education Student's Ability To Produce Creative Solutions, Jared Aaron Merrill

Theses and Dissertations

This study compared two groups of students being instructed in various methods of problem solving over a two-week period. The control group was instructed using the standard Career and Technology Education (CTE) Introduction curriculum on using brainstorming to solve problems. The treatment group was instructed using a structured problem solving method developed to help focus problem solving on finding a solution that satisfies the conditions. Students were selected from 7th grade students at a suburban middle school in Utah. The independent variable in this study was the type of problem solving instruction received. The dependent variables of interest were the …

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

The Arrows In Our Backs: Lessons Learned Trying To Change The Engineering Curriculum, Steven W. Villachica, Anthony Wayne Marker, Donald Plumlee, Linda Huglin, Amy Chegash

Organizational Performance and Workplace Learning Faculty Publications and Presentations

Published research has provided a robust set of documented tools and techniques for transforming individual engineering courses in ways that use evidence-based instructional practices. Many engineering faculty are already aware of these practices and would like to use them. However, they still face significant implementation barriers. The E²R2P effort addresses the question: How can successes in engineering education research translate into widespread instructional practice?

This poster session will describe hard-won lessons the E²R2P team has learned as it begins its third year attempting such curricular change.

Lesson 1: “Wonder workshops” and visible course redesigns don’t produce …

Quantitative Assessment Of Program Outcomes Using Longitudinal Data From The Fe Exam, Joe C. Guarino, James R. Ferguson, V. Krishna C. Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

There have been many studies providing details on using results from the Fundamentals of Engineering (FE) exam as metrics for meeting ABET program outcomes¹. However, implementing an FE-based set of metrics poses challenges not limited to assessing validity of results. Programs using FE-based metrics must also determine the position of the metrics in the overall assessment process. We present a method for using FE-based metrics as an integral part of the ABET program assessment process. The principle issues we address are: (1) The validity of using FE metrics for a group of graduating students when not all of …

Curriculum Exchange: “Make Your Own Earthquake”, Sandra Seale, Thalia Anagnos, Lelli Van Den Einde

Faculty Publications

A consortium of American universities is involved in earthquake engineering practice and research. Each campus of the consortium participates in outreach and education activities for the local schools and the public. One campus of the consortium, which operates earthquake field sites, designed a K-12 activity called “Make Your Own Earthquake” (MYOE). MYOE involves setting up earthquake field equipment (seismic instruments, data loggers, and computers) in a classroom. Children jump for 10 seconds, see their earthquake trace live on a computer screen and then take home a printed copy of their personal earthquake. Software was developed specifically for this activity. MYOE …

Curriculum Exchange: Visualization Tools And Online Courses For Teaching About Earthquakes, Sandra Seale, Thalia Anagnos

Faculty Publications

As part of a national consortium of universities practicing and doing research in earthquake engineering, our site has developed several videos for use in outreach and education. Visualization tools are extremely useful when teaching about how earthquakes shake the ground and the response of buildings to that shaking. Here we present videos that are targeted to specific audiences: (1) Animations of the response of two model buildings to two earthquakes are targeted at grade 6-16 students. The videos were created with data recorded on these test structures from the two earthquakes. The two events were both located directly below the …

How Important Is The Wow Factor In First Year Engineering Courses?, Thalia Anagnos, Burford Furman, Ping Hsu, Patricia Backer

Faculty Publications

This paper discusses the effectiveness of using projects with a “wow factor,” that is, engaging and challenging hands-on projects, in a freshman engineering course to motivate studentretention and persistence in engineering. Our course enrolls approximately 700 students per year in a lecture/laboratory format. Our university, a large comprehensive public university in thewest, has offered a freshman introduction to engineering course since 1992. In its original form, the course was part of a lower division engineering core, required of all engineering majors, and focused on computational skills (spreadsheets and MATLAB).In 1997, based on faculty and student feedback, a task force was …