Electrical and Electronics Commons^™

Botsitter, Maria Hatzis, Gregory Blondheim Jr., Marian Bonto, Brett Jacobsen

Williams Honors College, Honors Research Projects

As society progresses into an era where both parents work, whether it is online or in person, children in the home may be put in dangerous situations if they are not given the attention they need. The BotSitter is an automated system that follows the child around and makes an audio alarm to alert both the child and the nearby guardian. Using RSSI trilateration, predetermined danger areas, and embedded controls, the BotSitter will be able to follow the child. The device can manage to keep track of the child for the guardian while being almost completely automated outside of setup.

Enhancing Traffic Safety In Unpredicted Environments With Integration Of Adas Features With Sensor Fusion In Intelligent Electric Vehicle Platform With Implementation Of Environmental Mapping Technology, David S. Obando Ortegon

College of Graduate Studies: Theses & Dissertations

A major objective on society is to reduce the number of accidents and fatalities on the road for drivers, and pedestrians. Therefore, the automotive engineering field is working on this problem through the development and integration of safety technologies such as advanced driving assistance systems. For this reason, this work was intended to develop and evaluate the performance of different ADAS features and IV technologies under unexpected scenarios. This by the development of safety algorithms applied to the intelligent electric vehicle designed and built in this work, through the use of ADAS sensors based on sensor fusion. Evaluation of AEB, …

In Band Full Duplex For Wireless Communication, A Medium Access Control Perspective, Yazeed Alkhrijah

Electrical Engineering Theses and Dissertations

In-band full duplex (IBFD) for wireless communication is defined as the ability of a node to send and receive data simultaneously by using the same frequency band. IBFD has the potential to double the spectral efficiency of wireless networks. In addition, IBFD improves security by mystifying any eavesdropper with multiple transmitted signals in a single frequency. Also, IBFD reduces the end-to-end transmission delay and solves the hidden terminal and exposed terminal problems. However, IBFD suffers from self-interference. Canceling self-interference (SI) is the main challenge in enabling IBFD. Another challenge for IBFD is to manage access to the network. IEEE802.11 are …

Low Power Multi-Channel Interface For Charge Based Tactile Sensors, Samuel Hansen

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Analog front end electronics are designed in 65 nm CMOS technology to process charge pulses arriving from a tactile sensor array. This is accomplished through the use of charge sensitive amplifiers and discrete time filters with tunable clock signals located in each of the analog front ends. Sensors were emulated using Gaussian pulses during simulation. The digital side of the system uses SAR (successive approximation register) ADCs for sampling of the processed sensor signals.

Adviser: Sina Balkır

Diy Cell Incubator, Hayden James Jeanor

Electrical Engineering

The purpose of creating a cell Incubator is for the development of cell and tissue production in laboratory settings. Large scale research projects and the medical community grow cells for various reasons, including experiments and creating tissue for patients. However, they cannot simply depend on growing cells in a petri dish that sit on a rack at room temperature. To grow heathy cells in the fastest way possible, they use cell incubators. Cell incubators create an atmosphere within the incubation bay that is designed to promote cell growth. The three main components that need to be constantly regulated, using a …

A Design Flow For Additively Manufactured 3d Metasurface Antennas​, Justin Parkhurst

Doctoral Dissertations and Master's Theses

Metasurface (MTS) antennas are complex arrays consisting of hundreds or thousands of individual elements that each exert their own influence on the performance of the antenna. Due to this, the process of designing and developing a MTS antenna can be intensive in terms of both the time to understand the how these antennas operate and time running calculations that achieve optimal performance. Through the use of automation for geometry creation in ANSYS HFSS, the work involved in making a MTS antenna can be greatly simplified. The overall objective of this thesis is to reduce the burden of constructing a MTS …

Hybrid Smart Transformer For Enhanced Power System Protection Against Dc With Advanced Grid Support, Moazzam Nazir

All Dissertations

The traditional grid is rapidly transforming into smart substations and grid assets incorporating advanced control equipment with enhanced functionalities and rapid self-healing features. The most important and strategic equipment in the substation is the transformer and is expected to perform a variety of functions beyond mere voltage conversion and isolation. While the concept of smart solid-state transformers (SSTs) is being widely recognized, their respective lifetime and reliability raise concerns, thus hampering the complete replacement of traditional transformers with SSTs. Under this scenario, introducing smart features in conventional transformers utilizing simple, cost-effective, and easy to install modules is a highly desired …

Standalone Wireless Humming Music Synthesizer, Elizaveta Viktorovna Koush, Conrad Kinsey, Alberto Munoz

Electrical Engineering

This project, called a standalone wireless humming music synthesizer, aimed to provide a tool for musicians to make creating music easier. It did this by removing learning barriers and adding an assistive functionality element that current synthesizers fail to address.

Existing methods for synthesizers typically include a keyboard or some collection of buttons to play melodies on. This requires the knowledge of music theory and a learning curve for the instrument, and this device aims to tackle this barrier. A device that can synthesize your voice into high-quality audio removes this musical knowledge barrier and allows anyone to easily convert …

Challenges And Signal Processing Of High Strain Rate Mechanical Testing, Barae Lamdini

Theses and Dissertations

Dynamic testing provides valuable insight into the behavior of materials undergoing fast deformation. During Split-Hopkinson Pressure Bar testing, stress waves are measured using strain gauges as voltage variations that are usually very small. Therefore, an amplifier is required to amplify the data and analyze it. One of the few available amplifiers designed for this purpose is provided by Vishay Micro-Measurements which limits the user’s options when it comes to research or industry. Among the challenges of implementing the Hopkinson technology in the industry are the size and cost of the amplifier. In this work, we propose a novel design of …

Dc Microgrid Fault Detection Using Multiresolution Analysis Of Traveling Waves, Rudy Montoya

Mechanical Engineering ETDs

Fast detection and isolation of faults in a DC microgrid is of particular importance. Fast tripping protection (i) increases the lifetime of power electronics (PE) switches by avoiding high fault current magnitudes and (ii) enhances the controllability of PE converters. This thesis proposes a traveling wave (TW) based scheme for fast tripping protection of DC microgrids. The proposed scheme utilizes a discrete wavelet transform (DWT) to calculate the high-frequency components of DC fault currents. Multiresolution analysis (MRA) using DWT is utilized to detect TW components for different frequency ranges. The Parseval energy calculated from the MRA coefficients are then used …

Removing Physical Presence Requirements For A Remote And Automated World - Api Controlled Patch Panel For Conformance Testing, Hunter George Wells

Honors Theses and Capstones

Quality assurance test engineers at the UNH-InterOperability Lab must run tests that require driving and monitoring a selection of DC signals. While the number of signals is numerous, there are limited ports on the test equipment, and only a few signals need patching for any given test. The selection of signals may vary between the 209 different tests and must be re-routed frequently. Currently, testers must leave their desk to manually modify the test setup in another room. This posed a considerable issue at the onset of the COVID-19 Pandemic when physical access was not possible. In order to enable …

Autonomous Wildfire Detection System, Matthew Pyle, Nick Garrett

Williams Honors College, Honors Research Projects

According to the National Fire Protection Association Journal, federal wildfire suppression costs in the United States have risen from an annual average of about $425 million from 1985 to 1999 up to $1.6 billion from 2000 to 2019. On average, more than 200,000 acres in the United States are burned per year due to wildfires, with more than 700,000 acres burned in 2020 alone. With the risk of wildfire ever rising, there is a need for better early detection of remote wildfires, as existing methods often include long delays like satellites or rely on human lookout towers. The objective is …

Smart Kettlebell, Cole Russell, Patrick Davis, Ryan Deboer, Isaac Stecker

Williams Honors College, Honors Research Projects

The purpose of design team 08’s senior design project is to create and implement a workout device that will be able to calculate the caloric expenditure, repetitions, and length of a workout. Once the duration of a workout is completed, the user metrics will be communicated from the kettlebell system to a user application via Bluetooth. The caloric expenditure will be used using the data that is provided from the accelerometer. The duration of the workout will be controlled using a push button that is connected to the kettlebell system that will allow for the start and stop of a …

An Analysis On Adversarial Machine Learning: Methods And Applications, Ali Dabouei

Graduate Theses, Dissertations, and Problem Reports (ETD)

Deep learning has witnessed astonishing advancement in the last decade and revolutionized many fields ranging from computer vision to natural language processing. A prominent field of research that enabled such achievements is adversarial learning, investigating the behavior and functionality of a learning model in presence of an adversary. Adversarial learning consists of two major trends. The first trend analyzes the susceptibility of machine learning models to manipulation in the decision-making process and aims to improve the robustness to such manipulations. The second trend exploits adversarial games between components of the model to enhance the learning process. This dissertation aims to …

Enhanced Security Utilizing Side Channel Data Analysis, Michael Taylor

Computer Science and Engineering Theses and Dissertations

The physical state of a system is affected by the activities and processes in which it is tasked with carrying out. In the past there have been many instances where such physical changes have been exploited by bad actors in order to gain insight into the operational state and even the data being held on a system. This method of side channel exploitation is very often effective due to the relative difficulty of obfuscating activity on a physical level. However, in order to take advantage of side channel data streams one must have a detailed working knowledge of how a …

Indoor Positioning Using Synchronized Ultrasonic Ofdma Signals, Julian Bartolone

Master's Theses

This paper proposes a method of short-range indoor localization using differential phase measurements of synchronized two-tone ultrasonic signals in an Orthogonal Frequency Multiple Access (OFDMA) scheme. This indoor positioning system (IPS) operates at an ultrasonic frequency of approximately 40kHz and synchronizes using an infrared signal. The OFDMA scheme allows for a receiver to process the signals from multiple transmitters continuously without the signals interfering with each other. The phases of the signals are measured using Goertzel Filters, allowing for low-complexity frequency content analysis. A MATLAB simulation using the proposed localization method is performed using four transmitter nodes in the corners …

Network Management, Optimization And Security With Machine Learning Applications In Wireless Networks, Mariam Nabil

Theses and Dissertations

Wireless communication networks are emerging fast with a lot of challenges and ambitions. Requirements that are expected to be delivered by modern wireless networks are complex, multi-dimensional, and sometimes contradicting. In this thesis, we investigate several types of emerging wireless networks and tackle some challenges of these various networks. We focus on three main challenges. Those are Resource Optimization, Network Management, and Cyber Security. We present multiple views of these three aspects and propose solutions to probable scenarios. The first challenge (Resource Optimization) is studied in Wireless Powered Communication Networks (WPCNs). WPCNs are considered a very promising approach towards sustainable, …

First Demonstration Of Orange-Yellow Light Emitter Devices In Ingap/ Inalgap Laser Structure Using A Strain-Induced Quantum Well Intermixing Technique, Bayan A. Alnahhas

Effat Undergraduate Research Journal

In this paper, a novel strain-induced quantum well intermixing (QWI) technique is employed on an InGaP/InAlGaP material system to promote interdiffusion via application of a thick-dielectric encapsulant layer, in conjunction with cycle annealing at elevated temperature. With this technique, we demonstrate the first yellow superluminescent (SLD) at a wavelength of 583nm with a total two-facet output power of ~4.5mW—the highest optical power ever reported at this wavelength in this material system. The demonstration of the yellow SLD without complicated multiquantum barriers to suppress the carrier overflow will have a great impact in realizing the yellow laser diode that cannot be …

Reference Design Of An Online Emulation And Hot-Patching Approach For Power Electronic Controller Validation, Estefano Soria Pearson

Graduate Theses and Dissertations

This thesis aims to develop a reference design of an online security system approach embedded in a power electronic controller for cybersecurity purposes. Cybersecurity in power electronics focuses on reducing vulnerabilities in the system, where most reside in the communication with the hardware devices. Although methods to secure communications lessen the probability and effects of cyber-attacks, discovering vulnerabilities is inevitable. This thesis attempts to provide a fail-safe approach to securing the system by targeting the safety of the power-electronic controller. This approach applies an additional security layer in case of a malicious or accidental controller firmware malfunction.

The online security …

Efficiently Estimating Survival Signature And Two-Terminal Reliability Of Heterogeneous Networks Through Multi-Objective Optimization, Daniel Bruno Lopes Da Silva

Graduate Theses and Dissertations

The two-terminal reliability problem is a classical reliability problem with applications in wired and wireless communication networks, electronic circuit design, computer networks, and electrical power distribution, among other systems. However, the two-terminal reliability problem is among the hardest combinatorial problems and is intractable for large, complex networks. Several exact methods to solve the two-terminal reliability problem have been proposed since the 1960s, but they have exponential time complexity in general. Hence, practical studies involving large network-type systems resort to approximation methods to estimate the system's reliability. One attractive approach for quantifying the reliability of complex systems is to use signatures, …

An Lpc Pole Processing Method For Enhancing The Identification Of Dominant Spectral Features, Jin Xu, Mark Davis, Ruairí De Fréin

Articles

This paper proposes a new time-resolved spectral analysis method based on a modification to the linear predictive coding (LPC) method for enhancing the identification of the dominant frequencies of a signal. The method described here is based on a z-plane analysis of the LPC poles. These poles are used to produce a series of reduced order filter transfer functions which can accurately identify and estimate the frequency of the dominant spectral features. The standard LPC method has been shown to suffer from a sensitivity to noise and its performance is dependent on the filter order. The proposed method can …

Error Prevention In Sensors And Sensor Systems, Pedro J. Chacon Dominguez

LSU Doctoral Dissertations

Achievements in all fields of engineering and fabrication methods have led towards optimization and integration of multiple sensing devices into a concise system. These advances have caused significant innovation in various commercial, industrial, and research efforts. Integrations of subsystems have important applications for sensor systems in particular. The need for reporting and real time awareness of a device’s condition and surroundings have led to sensor systems being implemented in a wide variety of fields. From environmental sensors for agriculture, to object characterization and biomedical sensing, the application for sensor systems has impacted all modern facets of innovation. With these innovations, …

Optoelectronic Valley-Spin Qubits With Ambipolar Quantum Dots, Jeremy Tull

Electrical Engineering Undergraduate Honors Theses

The current limitations of qubit-based processors are caused by imperfections in quantum gates, leading to a lack of gate fidelity. Gate fidelity can be refined by extending the coherence of qubits and reducing logic operation speed. A potential solution is to develop a hybrid qubit that has the coherence of electrically-controlled quantum dots and the gate speed of their optically-controlled counterparts. Quantum bits that utilize ultrafast optical gating to perform gate operations require precise control of the gating pulse duration. Optical dispersion can cause adverse effects pulse duration, such as pulse broadening, so dispersion-compensation techniques must be employed; by properly …

An 8-Bit Analog-To-Digital Converter For Battery Operated Wireless Sensor Nodes, Marvin Wayne Suggs Jr.

Graduate Theses and Dissertations

Wireless sensing networks (WSNs) collect analog information transduced into the form of a voltage or current. This data is typically converted into a digital representation of the value and transmitted wirelessly using various modulation techniques. As the available power and size is limited for wireless sensor nodes in many applications, a medium resolution Analog-to-Digital Converter (ADC) is proposed to convert a sensed voltage with moderate speeds to lower power consumption. Specifications also include a rail-to-rail input range and minimized errors associated with offset, gain, differential nonlinearity, and integral nonlinearity. To achieve these specifications, an 8-bit successive approximation register ADC is …

Design And Assembly Of High-Temperature Signal Conditioning System On Ltcc With Silicon Carbide Cmos Circuits, Sajib Roy

Graduate Theses and Dissertations

The objective of the work described in this dissertation paper is to develop a prototype electronic module on a low-temperature co-fired ceramic (LTCC) material. The electronic module would perform signal conditioning of sensor signals (thermocouples) operating under extreme conditions for applications like gas turbines to collect data on the health of the turbine blades during operation so that the turbines do not require shutdown for inspection to determine if maintenance is required. The collected data can indicate when such shutdowns, which cost $1M per day, should be scheduled and maintenance actually performed. The circuits for the signal conditioning system within …

Channel Estimation In Multi-User Massive Mimo Systems By Expectation Propagation Based Algorithms, Mohammed Rashid

LSU Doctoral Dissertations

Massive multiple input multiple output (MIMO) technology uses large antenna arrays with tens or hundreds of antennas at the base station (BS) to achieve high spectral efficiency, high diversity, and high capacity. These benefits, however, rely on obtaining accurate channel state information (CSI) at the receiver for both uplink and downlink channels. Traditionally, pilot sequences are transmitted and used at the receiver to estimate the CSI. Since the length of the pilot sequences scale with the number of transmit antennas, for massive MIMO systems downlink channel estimation requires long pilot sequences resulting in reduced spectral efficiency and the so-called pilot …

Analog & Digital Remote Synthesizer, Adam Brunner, Andrew Cihon-Scott, Scott Grisso, Linus Wright

Williams Honors College, Honors Research Projects

The purpose of this project is to develop and design an analog synthesizer musical instrument that integrates embedded digital hardware into the design to enable control from a remote source. The use of digital hardware enables the potential for a wide range of convenient features such as sound profile saving and loading, output recording functionality, and the ability to accept digital input from another musical instrument utilizing the Musical Instrument Digital Interface (MIDI). In addition to the synthesizer itself, this project also includes the design of a companion application that can be hosted on a wide variety of consumer computing …

Quality Assurance Of Lightweight Structures Via Phase-Based Motion Estimation, Ikenna E. Ifekaonwu

College of Graduate Studies: Theses & Dissertations

In recent years, lightweight structures have become mature and adopted in various applications. The importance of quality assurance cannot be overemphasized hence extensive research has been conducted to assess the quality of lightweight structures. This study investigates a novel process that exploits motion magnification to investigate the damage characteristics of lightweight mission-critical parts. The goal is to assure the structural integrity of 3D printed structures and composite structures by determining the inherent defects present in the part by exploiting their vibration characteristics. The minuscule vibration of the structure was recorded with the aid of a high-speed digital camera, and the …

Hard Hat Ambient Liability Observer (Halo), Hunter Hykes, Nathan Kish, Brian Thomson

Williams Honors College, Honors Research Projects

Capturing workplace incident information is a growing area of concern for most companies. To assist with this, the design team proposed the H.A.L.O. This design uses time-of-flight sensors connected to LEDs to create a proximity-based hazard warning system. It also records incident data using an accelerometer and micro-SD card. This helps workers avoid some of the most common workplace injuries, slips, trips, and falls and accidental collisions.

Students have created a design with engineering, and marketing requirements that accomplish this task. The proposed design allows for this monitoring and mitigation systems to be attached to hard hats. Team members developed …

Light Loaded Automated Guided Vehicle, Marcus Radtka, Nazar Paramashchuk, Lawrence Shevock

Williams Honors College, Honors Research Projects

The objective of the locomotion system was to design and implement the mechanical, electrical, and software related functions to ensure the LLAGV had the capability of maneuvering its surroundings. The LLAGV’s motors were represented in an open loop transfer function to utilize RPM feedback and a compensator when needed. The modeled compensator helped control the LLAGV’s speed and acceleration, enabling further control of the LLAGV. The internal circuitry has the means to properly distributed power to all components and allowed the user to control the LLAGV to their desire. The application software within the LLAGV locomotion system (LLAGV-LS) had consideration …