Electrical and Electronics Commons^™

Affordable Bioprint Head-Adapter For 3d Printers, Andrew Ceralde, Dominic Drake, Noah Engles, Mohammad Alwan, Nevada Perry

Honors Capstones

Introduction: Addressing the need for affordable and accessible bioprinting technology, the Northern Illinois University bioprinting research and design project aims to democratize the field by developing an open source bioprint head. The initiative targets the prohibitive cost of commercial bioprinters by proposing an optimal design that can be integrated with widely available 3D printers, like the Creality Ender-3. This approach seeks to enable the widespread adoption of bioprinting technology, particularly for applications in tissue engineering and regenerative medicine.

Methods: Leveraging SolidWorks for design, the project employs a methodology that combines a precision extrusion system with thermal and UV crosslinking capabilities. …

Database And Machine Learning Model For Classifying Autism Spectrum Disorder From Smartphone Based Electroretinography, Rory Harris

Honors Scholar Theses

Autism Spectrum Disorder (ASD) is a neurodevelopmental disorder that negatively affects a patient’s cognitive and communication aptitude and, therefore, can severely impact that patient’s quality of life. Because of this, early diagnosis is paramount. In recent studies, electroretinography (ERG), which is a measure of the retina’s electrical response to a brief flash of light into the eye, has shown promise in detecting ASD. Access to these scans can provide early diagnosis, improving well-being. Current ERG devices are very expensive due to their on board processing capabilities. This paper aims to create an ERG device using a smartphone as the main …

Towards A Wearable Device For Measuring Impedance Plethysmography Of The Radial Artery, Pritom Chowdhury

Dartmouth College Master’s Theses

Recent advancements in bioimpedance technology have demonstrated significant promise in the application of cardiac health monitoring. This research explores the design and development of a forearm-based wearable bioimpedance device for non-invasive measurement of heart rate and respiratory rate at an accuracy level comparable to medical-grade monitors. It utilizes a tetrapolar electrode configuration to analyze bioimpedance changes in the radial artery due to blood flow.

An ongoing aspect of this work involves the preliminary development of an embedded framework intended to integrate signal generation, acquisition, and processing within the device to achieve compact and efficient system design, anticipated to contribute to …

Low Cost Magnetometer Calibration And Distributed Simultaneous Multipoint Ionospheric Measurements From A Sounding Rocket Platform, Joshua W. Milford

Doctoral Dissertations and Master's Theses

Low-cost and low-size-weight-and-power (SWaP) magnetometers can provide greater accessibility for distributed simultaneous measurements in the ionosphere, either onboard sounding rockets or on CubeSats. The Space and Atmospheric Instrumentation Laboratory (SAIL) at Embry-Riddle Aeronautical University has launched a multitude of sounding rockets in recent history: one night-time mid-latitude rocket from Wallops Flight Facility in August 2022 and three mid-latitude rockets from White Sands Missile Range during the October 2023 annular solar eclipse. All rockets had a comprehensive suite of instruments for electrodynamics and neutral dynamics measurements. Among this suite was one science-grade three-axis fluxgate magnetometer (Billingsley TFM65VQS / TFM100G2) and up …

Reconstruction Of Radar Range Profiles Using Dropped Channel Polarimetric Compressive Sensing, Nat Thomason

Theses and Dissertations

This thesis documents the design, construction and testing of a bench-top level measurement system and verifies previously established Dropped Channel Polarimetric Synthetic Aperture Radar Compressive Sensing (DCPCS) simulation results. Compressive Sensing is a mathematical technique which can capture and represent compressible signals at sampling rates significantly below the Nyquist rate. DCPCS is a technique which enhances Compressive Sensing techniques using known physical antenna crosstalk values. The DCPCS technique enables reconstruction of fully polarimetric signals whilst only measuring part of the signal, reducing data capture requirements.

Non-Invasive Monitoring Device For Early Detection Of Breast Cancer Related Lymphedema, Amy Prendergast

Honors Theses and Capstones

Breast Cancer Related Lymphedema (BCRL) is a common co-morbidity in cancer survivors following neoadjuvant therapies such as chemotherapy, radiation, and/or surgery. It is brought about by the disruption in the lymphatic system (think lymph node biopsy) that leads to a buildup of lymphatic fluid in the arm. Current diagnostic strategies for this condition are merely retroactive, and fairly limited in the parameters that are examined to ensure patient well-being long term. We hypothesize that with an approach that mimics bioimpedance spectroscopy analysis, we will be able to provide a clinical support tool that would better determine early stages of lymphedema …

Implementing Associative Learning Using Neuromorphic Robot, Vinay Kumar Pillalamarri

Dissertations, Master's Theses and Master's Reports

Associative learning, a key cognitive process seen across the animal kingdom, enables organisms to form connections between stimuli and adapt their behaviors based on past experiences. A particularly powerful example is fear conditioning, where animals learn to associate a neutral stimulus with an aversive one, allowing them to predict and avoid potential threats. Inspired by this mechanism, this project implements associative learning on an unmanned ground vehicle (UGV) to develop adaptive behavior through neuromorphic principles. Utilizing Nengo for neural modeling, the UGV learns to associate visual (red color) and tactile (vibration) stimuli through Hebbian learning, a biologically inspired synaptic adaptation …

A Novel Processor Architecture Implementing The Stacked Error Diffusion Algorithm And Its Zynq-Based Realization, Qishi Hu

Theses and Dissertations--Electrical and Computer Engineering

Digital halftoning reproduces continuous-tone images using patterns of black and white dots, while multitoning extends this concept by incorporating inks with intermediate intensities. These techniques are extensively utilized in the printing industry to accommodate the limited range of inks available in printers. Stacked error diffusion is a high-quality multitoning algorithm that adheres to the blue-noise dithering standard. This thesis research studies the potential parallelism inherent in the algorithm and introduces the design of a novel processor architecture optimized for efficient execution. The architecture is realized on an FPGA development board featuring a Zynq SoC. Additionally, the hardware prototype can also …

Detecting Bearing Race Defects With Inductive Magnetic Reluctance Sensors And Artificial Neural Networks, Collin Daly

College of Graduate Studies: Theses & Dissertations

This work proposes a method of detecting physical damage to bearing races in a rotational assembly by means of magnetic reluctance sensors generating a signal from a rotating gear-tooth wheel. A nominally sinusoidal signal is generated based on the rotation of a gearwheel with regularly spaced voids and lands. Detection is based on the time variance of the signal periodically in relation to the gearwheel and the bearing damage. The purpose of this work is to propose a process to detect and classify bearing race defects using existing sensors and neural networks for hazardous area equipment applications.

Passive Wireless Corrosion And Temperature Detection In High-Temperature Environments, Noah Lane Strader

Graduate Theses, Dissertations, and Problem Reports (ETD)

This work focuses on the theory and development of LC sensors for high temperature and corrosion measurement for stainless steel and copper surfaces with power industry and general corrosion detection applications. The LC resonators were fabricated via screen printing an Ag inductor on an alumina substrate. The LC design was modeled using the ANSYS HFSS modeling package. The LC passive wireless sensors operate with resonant frequencies centered at 85-110 MHz. The wireless response of the LC sensor was interrogated and received by a radio frequency signal generator and spectrum analyzer at temperatures from 50-800 °C for copper ground planes and …

Energy Efficiency And Fault Tolerance In Open Ran And Future Internet, Saish Urumkar, Byrav Ramamurthy, Sachin Sharma

Conference papers

Open Radio Access Networks (Open RAN) repre- sent a promising technological advancement within the realm of the future internet. Research efforts are currently directed towards enhancing energy efficiency and fault tolerance, which are critical aspects for both Open RAN and the future internet landscape. In the context of energy saving in Open RAN, there exists a spectrum of methods for achieving energy efficiency. These methods include the toggling of on/off states for different hardware resources such as base station units, distributed units, and radio units. Conversely, for enhancing fault tolerance in Open RAN, Software-Defined Networking (SDN) and OpenFlow based techniques …

Improving Energy Efficiency In Open Ran Through Dynamic Cpu Scheduling, Saish Urumkar, Byrav Ramamurthy, Sachin Sharma

Conference papers

Open RAN is a promising cellular technology that is currently undergoing extensive research for future wireless radio access networks. Achieving optimal energy efficiency in Open RAN poses a significant challenge. This paper introduces a CPU scheduling algorithm that specifically targets this chal- lenge by optimizing energy consumption at the base station while maintaining optimal performance levels. With the goal of minimizing energy consumption, the proposed algorithm dynamically adjusts the CPU core states, seamlessly switching between active and sleep modes based on the load conditions. To evaluate the algorithm’s effectiveness in terms of energy saving and performance, experimental testing is conducted …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Electronic Note-String Detector, Gavin Garcia-Rossi, Tommy Smail

Electrical Engineering

As the virtual space has become a dominant part of everyone’s day-to-day lives, many normal face-to-face interactions and services have not yet been facilitated by adapting technology. One of these prevailing areas is music lessons. Over Zoom meetings, or other virtual platforms, it is tremendously challenging to teach students. These challenges include recognizing student mistakes audibly and visually, and being able to give confident feedback on the incorrect notes played by learning musicians. Without having to delve into improving the complex systems that would be required to improve audio, video, and connection quality of these connections, we have another solution …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

4-Band Personal Eq Device, Carson Kellerman

Electrical Engineering

The device is a 4-band EQ with 3.5mm audio input and output jacks. The device has 4 adjustable EQ bands. Each of the 4 bands are adjustable via knob potentiometers, and are able to boost or cut their respective center frequencies of 150Hz, 400Hz, 2500Hz, and 10kHz from -15dB to +15dB. The device is battery powered off of 1 9V battery and is able to function for 10 hours before needing to replace the batteries. The device has a Total Harmonic Distortion of less than 1% and a Signal to Noise Ratio greater than 60dB. Overall, this device allows music …

Improving Cellphone-Based Bio-Imaging Technique For Fluorescence Detection, Erteza T. Efaz

LSU Master's Theses

The research presented in this thesis focuses on the design, development, and evaluation of a fluorescence detection system. The system is implemented primarily as an Android application, Auto Camera, which leverages smartphone cameras to capture and analyze fluorescent images. The application provides a user-friendly interface with some configurable features like exposure time, ISO speed, and storage limit; as well as defining detection thresholds and setting acquisition intervals. This study begins with the architectural framework of the Android application, which is written in Java using Android Studio. The API compatibility is set to version 33, and users are prompted to grant …

A Novel Brain Computer Interface Design, Steven Vogan

Senior Honors Theses

A brain computer interface (BCI) is a system which connects neural signals to a computer system. They have been used for controlling systems including robotics, on-screen computer control such as mouse movement, typing, and synthesizing audio signals. Invasive, or implanted, systems are often long-term medical solutions, or used for research where very clear signal is required. Non-invasive systems usually rely on exterior signals gathered through a headset using one or more electrode sensors. These signals are composed of sums of neuron activation potentials from brain activity and can be used to determine particular aspects of brain function. All BCIs rely …

Characterization And Estimation Of Musculoskeletal Pain Using Machine Learning, Boluwatife Faremi

Master's Theses

Traditional scales utilized for recording pain are known to be highly subjective and biased due to inaccuracies in recollecting actual pain intensities. As a result, machine learning (ML) models that are trained using these scores as ground truth are reported to have low performance for objective pain classification because of the huge disparity between what was felt in moments of pain and the scores recorded afterward.

In the present study, two devices were designed for gathering real-time, continuous in-session subjective pain scores and the recording of the autonomic nervous system (ANS) altered endodermal (EDA) activity. 24 participants were recruited to …

Real-Time Filters, Spencer Smith

Thinking Matters Symposium

This project's goal is to create a visual representation of digital signal processing using a Raspberry Pi Pico board. External components will interface with the Pico to supply digital signals and display the results after processing the signal. A microphone will supply the signal to the Pico which will perform a Fourier Transform on the data and output a spectrogram to a display. The display is named ILI9341 which includes an SPI interface, micro SD card slot, and a 2.2 inch screen. The spectrogram includes the magnitudes of the transformed signal at each frequency and time. Each magnitude is illustrated …

Instrumented Control Column For Optionally Piloted Aircraft, Andrew J. Klein

Electrical Engineering

Natilus, an aerospace company that is rapid-prototyping optionally piloted aircraft (OPA) for the shipping industry, needs a system that retrieves control column position data in order to manipulate flight simulator parameters in software. At present, a universally compatible system for all aircraft does not exist. Typically, established aerospace companies will sink significant time and money into developing proprietary systems for control column data retrieval as every aircraft is unique in its layout and linkage design. However, as a startup developing their first aircraft, Natilus does not have the privilege of modifying an existing sensor system to work with their HIL …

Directional Speaker, Gabriel Tramontina Ceribelli, Vincent Trevor Pierce

Electrical Engineering

Parametric Acoustic Arrays (PAA) are highly directional soundwaves whose attenuation and spread are much less affected by distance from the source as compared to traditional speakers. A well-known application for PAA is the directional speaker. Studies show that noise directly affects health and decreasing noise pollution can help improve the quality of life for millions of people. Directional speakers can revolutionize society by coupling space with sound. This project encodes audio into two RF-Pulse Width Modulated (PWM) waves to drive a transducer array. Each RF-PWM wave interferes with the other in air to generate a Single Sideband (SSB) frequency spectrum …

Multi-Effects Analog Guitar Pedal, Carson J. Bryan

Electrical Engineering

The Multi-FX Analog Guitar Pedal includes the analysis, design, performance, PCB layout, and packaging of an industry-standard effects pedal for an electric guitar. This project takes an analog input signal and utilizes analog circuitry to give the user the option to customize the way that their playing sounds. Effects include the options to add equalization filtering and distortion. The EQ filtering will allow the user to attenuate or gain certain frequencies divided into the 3 standard audio bands: bass (20-300 Hz), middle (300-4000 Hz), and treble (4-20 kHz). The soft-clipping distortion stage will allow the user to move around the …

Programmable Vibration Table Retrofit With Eagle Medical, Jonathan Ilagan, Madhav Asok, Max Lewter

Biomedical Engineering

This project aimed to repair and upgrade a vibration table used for package testing for the sponsor, Eagle Medical - a medical packaging and sterilization company based in Paso Robles, California. The current vibration table is not programmable and lacks circuit diagrams, making it difficult to repair. In addition, it is not functional due to internal circuitry issues and power requirements. To address these issues, the team will implement several upgrades to improve the product and allow for better random cyclic vibration testing. A full assessment of the existing vibration table will be conducted to ensure the viability of these …

Approximate And Sample Entropy Of Center Of Pressure In Unperturbed Tandem Standing: Contribution Of Embedding Dimension And Tolerance, Jayla Mashae Wesley

Masters Theses

Approximate entropy (ApEn) and sample entropy (SampEn) are statistical methods designed to quantify the regularity or predictability of a time series. Although ApEn has been a prominent choice for use, it is currently unclear as to which method and parameter selection combination is optimal for its application in biomechanics. The goal of this thesis was to examine the difference between ApEn and SampEn related to center of pressure (COP) data during standing balance tasks, while also refining tolerance r, to determine entropy optimization. Six participants completed five 30-second, feet together and tandem standing, trials under eyes-open and eyes-closed conditions. Ground …

Power Amplifier Based On Composite Injection-Voltaic Transistors, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved …

Portable Diffuse Reflectance Spectroscopy For Non-Invasive And Quantitative Assessment Of The Parathyroid Glands Viability During Surgery, Mark Romine, Linh Luong, Alex Moazzen, Katie Cho, Paul Lee

Symposium of Student Scholars

Portable Diffuse Reflectance Spectroscopy for Non-invasive and Quantitative Assessment of the Parathyroid Glands Viability During Surgery

Mark Romine, Linh Luong, Alex Moazzen, Katie Cho and Paul Lee

The parathyroid glands (PTGs) are responsible for the regulation of calcium levels in the blood by secreting a parathyroid hormone. This parathyroid hormone then regulates the body’s absorption, storage, and secretion of calcium, which can directly affect the way muscles and nerves operate. PTGs are often at risk of damage, or accidental removal during thyroid surgeries, because it is challenging to identify PTGs and to determine their viability. Current methods of visual inspections …

Effects Of Calibration Errors On Dropped-Channel Polarimetric Synthetic Aperture Radar, Jacob C. Morrison

Theses and Dissertations

Compressed Sensing (CS) is a mathematical technique that can be applied to sparse data sets to allow for sub-Nyquist sampling. DCPCS is a CS technique that recovers the signal from unmeasured polarisation channels due to antenna crosstalk coupling the information onto the remaining channels. DCPCS reduces data storage/transmission and receiver hardware requirements. This thesis examines the robustness of DCPCS to calibration errors on the antenna crosstalk matrix. Although the antenna design problem is relaxed to a large region of acceptable crosstalk values, very accurate calibration may be required in a monostatic radar. This thesis also looks at the importance of …

Predicting Jamming Systems Frequency Hopping Sequences Using Artificial Neural Networks, Charles Strickland

College of Graduate Studies: Theses & Dissertations

This work proposes a neural network architecture that was designed to predict and reverse engineer frequency hopping jamming systems. The neural network was initially optimized for use with a 12th order linear shift feedback register maximum length sequence utilizing a minimal polynomial as the characteristic polynomial. This neural network was then scaled to accommodate 7 different sequences, of orders 6 through 12. The neural network was trained for these sequences using training data that is 10 times the length of the sequence. This information is then used to generate a hopping sequence that reduces the jamming interference to 0 with …

Wifi Sensing At The Edge Towards Scalable On-Device Wireless Sensing Systems, Steven M. Hernandez

Theses and Dissertations

WiFi sensing offers a powerful method for tracking physical activities using the radio-frequency signals already found throughout our homes and offices. This novel sensing modality offers continuous and non-intrusive activity tracking since sensing can be performed (i) without requiring wearable sensors, (ii) outside the line-of-sight, and even (iii) through the wall. Furthermore, WiFi has become a ubiquitous technology in our computers, our smartphones, and even in low-cost Internet of Things devices. In this work, we consider how the ubiquity of these low-cost WiFi devices offer an unparalleled opportunity for improving the scalability of wireless sensing systems. Thus far, WiFi sensing …