Open Access. Powered by Scholars. Published by Universities.®

Electrical and Computer Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Series

1998

Discipline
Institution
Keyword
Publication

Articles 91 - 116 of 116

Full-Text Articles in Electrical and Computer Engineering

The Investigation Of The Relaxation Process In Antiferroelectric Liquid Crystals By Electro-Optic Spectroscopy, Yuri Panarin, O. Kalinovskaya, J.K. Vij Jan 1998

The Investigation Of The Relaxation Process In Antiferroelectric Liquid Crystals By Electro-Optic Spectroscopy, Yuri Panarin, O. Kalinovskaya, J.K. Vij

Articles

Electrooptic spectroscopy of an antiferroelectric liquid crystal is carried out over a range of frequencies from 1 Hz to 100 kHz. In the antiferroelectric SmCA phase two relaxation processes are found, one at the fundamental frequency of a mode and the second at twice the frequency of a different mode. A comparison of the results of the electro-optic spectroscopy with a theoretical study of the motion of the director of an antiferroelectric helix subject to a weak alternating field enables a determination of the origin of the relaxation processes in antiferroelectric phases. © 1998 American Institute of Physics.

Go to article

A Maximum Torque Per Ampere Control Strategy For Induction Motor Drives, O. Wasynczuk, Keith Corzine, S. D. Sudhoff, Jerry L. Tichenor, P. C. Krause, I. G. Hansen, L. M. Taylor Jan 1998

A Maximum Torque Per Ampere Control Strategy For Induction Motor Drives, O. Wasynczuk, Keith Corzine, S. D. Sudhoff, Jerry L. Tichenor, P. C. Krause, I. G. Hansen, L. M. Taylor

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a new control strategy is proposed which is simple in structure and has the straightforward goal of minimizing the stator current amplitude for a given load torque. It is shown that the resulting induction motor efficiency is reasonably close to optimal and that the approach is insensitive to variations in rotor resistance. Although the torque response is not as fast as in field-oriented (FO) control strategies, the response is reasonably fast. In fact, if the mechanical time constant is large relative to the rotor time constant, which is frequently the case, the sacrifice in dynamic performance is …

Go to article

Microwave Filtering Of Unwanted Oscillations On Base Of Hexagonal Ferrite Composite Thick Films, Marina Koledintseva, Alexander A. Kitaytsev, Andrey A. Shinkov Jan 1998

Microwave Filtering Of Unwanted Oscillations On Base Of Hexagonal Ferrite Composite Thick Films, Marina Koledintseva, Alexander A. Kitaytsev, Andrey A. Shinkov

Electrical and Computer Engineering Faculty Research & Creative Works

The paper is aimed at the design of waveguide filters of lower frequencies using composite thick films (CTF) made of high-anisotropy polycrystalline hexagonal ferrite powders. Theoretical and experimental results describing the possibility of forming the desired frequency characteristic of the filters are presented

Go to article

Simulation Studies With A Continuously Online Trained Artificial Neural Network Controller For A Micro-Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley Jan 1998

Simulation Studies With A Continuously Online Trained Artificial Neural Network Controller For A Micro-Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper reports on the simulation studies carried out using MATLAB/SIMULINK and the practical implementation of a continuously online trained (COT) artificial neural network (ANN) controller to identify the continuous changing complex nonlinear dynamics of the power system, and another COT ANN to control a micro-turbogenerator which consists of a turbine simulator and a micro-alternator connected to an infinite bus through a short transmission line in a laboratory environment. This neural network controller augments/replaces the traditional automatic voltage regulator (AVR) and the turbine governor of the generator. Simulation and practical results are presented to show that this COT ANN identifier/controller …

Go to article

Designing Power Bus Decoupling For Cmos Devices, S. Radu, Richard E. Dubroff, Todd H. Hubing, Thomas Van Doren Jan 1998

Designing Power Bus Decoupling For Cmos Devices, S. Radu, Richard E. Dubroff, Todd H. Hubing, Thomas Van Doren

Electrical and Computer Engineering Faculty Research & Creative Works

The adequacy of the DC power bus decoupling for CMOS devices can be determined if the effective board decoupling capacitance, the CMOS load capacitance, the CMOS power dissipation capacitance, the switching time, and the allowable bus noise voltage are known. A simple method is presented for estimating the effective decoupling capacitance. The load and power dissipation capacitance values are shown analytically and experimentally to be closely related to the transient current. The transient current and switching time are used to estimate the transient noise voltage on the power bus

Go to article

An Improved Method For Incorporating Magnetic Saturation In The Q-D Synchronous Machine Model, Keith Corzine, Brian T. Kuhn, S. D. Sudhoff, H. J. Hegner Jan 1998

An Improved Method For Incorporating Magnetic Saturation In The Q-D Synchronous Machine Model, Keith Corzine, Brian T. Kuhn, S. D. Sudhoff, H. J. Hegner

Electrical and Computer Engineering Faculty Research & Creative Works

An improved technique for incorporating saturation into the q-d axis model (Park''s model) of a synchronous machine is proposed. By choosing magnetizing flux linkage as a state variable, iterative procedures required by traditional methods are avoided. The saturation function is represented by an arctangent function which has some distinct advantages over polynomial representations and look-up tables. In particular, the parameters of the proposed function all have physical significance and the proposed function is defined over an infinite range of flux linkage. The model is verified for steady-state and transient conditions using a laboratory synchronous machine-rectifier system similar to those commonly …

Go to article

Emc Applications Of The Emap5 Hybrid Fem/Mom Code, Yun Ji, Todd H. Hubing, Mohammad Wares Ali Jan 1998

Emc Applications Of The Emap5 Hybrid Fem/Mom Code, Yun Ji, Todd H. Hubing, Mohammad Wares Ali

Electrical and Computer Engineering Faculty Research & Creative Works

EMAP5 is a numerical software package designed to model electromagnetic problems. It employs the finite element method (FEM) to analyze three-dimensional volumes, and the method of moments (MOM) to analyze the current distribution on the surface of these volumes. The two methods are coupled through the fields on the dielectric surface. This paper describes the formulation of the EMAP5 code and demonstrates how it can be used to analyze simple printed circuit board configurations

Go to article

Voice Recognition Using Neural Networks, Ganesh K. Venayagamoorthy, Viresh Moonasar, K. Sandrasegaran Jan 1998

Voice Recognition Using Neural Networks, Ganesh K. Venayagamoorthy, Viresh Moonasar, K. Sandrasegaran

Electrical and Computer Engineering Faculty Research & Creative Works

One solution to the crime and illegal immigration problem in South Africa may be the use of biometric techniques and technology. Biometrics are methods for recognizing a user based on unique physiological and/or behavioural characteristics of the user. This paper presents the results of ongoing work into using neural networks for voice recognition

Go to article

Dc Link Stabilized Field Oriented Control Of Electric Propulsion Systems, Keith Corzine, S. D. Sudhoff, Steven F. Glover, H. J. Hegner, H. N. Robey Jan 1998

Dc Link Stabilized Field Oriented Control Of Electric Propulsion Systems, Keith Corzine, S. D. Sudhoff, Steven F. Glover, H. J. Hegner, H. N. Robey

Electrical and Computer Engineering Faculty Research & Creative Works

Induction motor based electric propulsion systems can be used in a wide variety of applications including locomotives, hybrid electric vehicles, and ships. Field oriented control of these drives is attractive since it allows the torque to be tightly and nearly instantaneously controlled. However, such systems can be prone to negative impedance instability of the DC link. This paper examines this type of instability and sets forth a readily implemented albeit nonlinear control strategy to mitigate this potential problem.

Go to article

Excitation Of The Whispering-Gallery-Modes At The Shielded Hemispherical Dielectric Resonator, Sergey Kharkovsky, V. V. Kutuzov, A. E. Kogut, V. A. Solodovnik Jan 1998

Excitation Of The Whispering-Gallery-Modes At The Shielded Hemispherical Dielectric Resonator, Sergey Kharkovsky, V. V. Kutuzov, A. E. Kogut, V. A. Solodovnik

Electrical and Computer Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

A Practical Continually Online Trained Artificial Neural Network Controller For A Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley Jan 1998

A Practical Continually Online Trained Artificial Neural Network Controller For A Turbogenerator, Ganesh K. Venayagamoorthy, Ronald G. Harley

Electrical and Computer Engineering Faculty Research & Creative Works

This paper reports on the simulation and practical studies carried out on a single turbogenerator connected to an infinite bus through a short transmission line, with a continually online trained (COT) artificial neural network (ANN) controller to identify the turbogenerator, and another COT ANN to control the turbogenerator. This identifier/controller augments/replaces the automatic voltage regulator and the turbine governor. Results are presented to show that this COT ANN identifier/controller has the potential to allow turbogenerators to operate more closely to their steady-state stability limits and nevertheless “ride through” severe transient disturbances such as three phase faults. This allows greater usage …

Go to article

Substroke Matching By Segmenting And Merging For Online Korean Cursive Character Recognition, Chang-Soo Kim, Kang Ryoung Park, Byung Hwan Jun, Jaihie Kim Jan 1998

Substroke Matching By Segmenting And Merging For Online Korean Cursive Character Recognition, Chang-Soo Kim, Kang Ryoung Park, Byung Hwan Jun, Jaihie Kim

Electrical and Computer Engineering Faculty Research & Creative Works

The Korean character is composed of several alphabets in two-dimensional formation and the total number of Korean characters exceeds eleven thousand. Therefore, the previous approaches to Korean cursive characters pay most of their attention to segmenting a character into alphabets accurately. However, it is difficult because the boundaries of alphabets are not apparent in most cases. We propose an alphabet-based method without assuming accurate alphabet segmentation. In the proposed method, a cursive character is segmented into substrokes by a set of segmenting conditions. Then it is matched with the reference substrokes generated from alphabet models and ligatures by segmenting and …

Go to article

The General Approximation Theorem, Donald C. Wunsch, Alexander N. Gorban Jan 1998

The General Approximation Theorem, Donald C. Wunsch, Alexander N. Gorban

Electrical and Computer Engineering Faculty Research & Creative Works

A general approximation theorem is proved. It uniformly envelopes both the classical Stone theorem and approximation of functions of several variables by means of superpositions and linear combinations of functions of one variable. This theorem is interpreted as a statement on universal approximating possibilities ("approximating omnipotence") of arbitrary nonlinearity. For the neural networks, our result states that the function of neuron activation must be nonlinear, and nothing else

Go to article

An Automated State Model Generation Algorithm For Simulation/Analysis Of Power Systems With Power Electronic Components, Steven Pekarek, E. A. Walters, T. L. Skvarenina, O. Wasynczuk Jan 1998

An Automated State Model Generation Algorithm For Simulation/Analysis Of Power Systems With Power Electronic Components, Steven Pekarek, E. A. Walters, T. L. Skvarenina, O. Wasynczuk

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a recently developed algorithmic method of deriving the state equations of power systems containing power electronic components is described. Therein the system is described by the pertinent branch parameters and the circuit topology; however, unlike circuit-based algorithms, the difference equations are not implemented at the branch level. Instead, the composite system state equations are established. A demonstration of the computer implementation of this algorithm to model a variable-speed, constant-frequency aircraft generation system is described. Because of the large number of states and complexity of the system, particular attention is placed on the development of a model structure …

Go to article

Simulation Of Madmel Power Systems Components, Timothy L. Skvarenina, Oleg Wasynczuk, Paul C. Krause, Steven Pekarek Jan 1998

Simulation Of Madmel Power Systems Components, Timothy L. Skvarenina, Oleg Wasynczuk, Paul C. Krause, Steven Pekarek

Electrical and Computer Engineering Faculty Research & Creative Works

Detailed computer models of system components for More Electric Aircraft have been developed using the Advanced Control System Language (ACSL) and its graphical front-end, Graphic Modeller. Among the devices modeled are a wound-rotor synchronous generator with parallel bridge-rectifier outputs, a switched-reluctance generator, and various loads including a DC-DC converter, an inverter-driven induction motor, and an electro-hydrostatic actuator. Results from the simulations are presented together with corroborating experimental test results. Copyright © 1998 Society of Automotive Engineers, Inc.

Go to article

Determination Of Aircraft Orientation For A Vision-Based System Using Artificial Neural Networks, Sanjeev Agarwal, Subhasis Chaudhuri Jan 1998

Determination Of Aircraft Orientation For A Vision-Based System Using Artificial Neural Networks, Sanjeev Agarwal, Subhasis Chaudhuri

Electrical and Computer Engineering Faculty Research & Creative Works

An algorithm for real-time estimation of 3-D orientation of an aircraft, given its monocular, binary image from an arbitrary viewing direction is presented. This being an inverse problem, we attempt to provide an approximate but a fast solution using the artificial neural network technique. A set of spatial moments (scale, translation, and planar rotation invariant) is used as features to characterize different views of the aircraft, which corresponds to the feature space representation of the aircraft. A new neural network topology is suggested in order to solve the resulting functional approximation problem for the input (feature vector)-output (viewing direction) relationship. …

Go to article

Electrochemical Characterization Of Copper Deposited On Plasma And Thermally Modified Titanium Surfaces, K. S. Teng, J. L. Delplancke, Jiangfan Zhang, T. J. O'Keefe Jan 1998

Electrochemical Characterization Of Copper Deposited On Plasma And Thermally Modified Titanium Surfaces, K. S. Teng, J. L. Delplancke, Jiangfan Zhang, T. J. O'Keefe

Electrical and Computer Engineering Faculty Research & Creative Works

Thin oxide films were grown at temperatures from 373 to 1073 K in plasma and in air on commercially pure titanium substrates. It was determined that the color, thickness, composition, phase, and polarization behavior in a copper electrolyte varied with operating conditions: temperature, oxygen partial pressure, and plasma composition. High-temperature and high oxygen partial pressure plasma produced a thick oxide film. The surface film structure transformed from TiO2 (anatase) to TiO2 (rutile) at a temperature of 600 °C. A lower oxide of the form TinO2n-1, such as Ti2O3 (which may be porous) or possibly Ti3O5, was formed on a thermally …

Go to article

Macros By Example In A Graphical Uims, Dan R. Olsen Jr., Jonathan Turner, Stephen Bart Wood, John R. Dance Jan 1998

Macros By Example In A Graphical Uims, Dan R. Olsen Jr., Jonathan Turner, Stephen Bart Wood, John R. Dance

Faculty Publications

A macro facility that allows end users to extend interactive graphical applications is presented as part of a user-interface management system (UIMS). Such macros are expressed by example; that is, the end user programs the macro in the application's generated user interface. Problems with macros-by-example in graphical applications are explored, and requirements to accommodate such a facility are defined for the UIMS dialogue model. Existing UIMS models are reviewed relative to these requirements, and the unique facilities of the MIKE (menu interaction kontrol environment) semantics-based model are presented. The implementation of the macro-by-example system is discussed, as well as the …

Go to article

Exact Graph Coloring For Functional Decomposition: Do We Need It?, Marek Perkowski, Rahul Malvi, Lech Jozwiak Jan 1998

Exact Graph Coloring For Functional Decomposition: Do We Need It?, Marek Perkowski, Rahul Malvi, Lech Jozwiak

Electrical and Computer Engineering Faculty Publications and Presentations

Finding column multiplicity index is one of important component processes in functional decomposition of discrete functions for circuit design and especially Data Mining applications. How important it is to solve this problem exactly from the point of view of the minimum complexity of decomposition, and related to it error in Machine Learning type of applications? In order to investigate this problem we wrote two graph coloring programs: exact program EXOC and approximate program DOM (DOM cab give provably exact results on some types of graphs). These programs were next incorporated into the multi-valued decomposer of functions and relations NVGUD. Extensive …

Go to article

Multi-Level Programmable Arrays For Sub-Micron Technology Based On Symmetries, Marek Perkowski, Malgorzata Chrzanowska-Jeske, Yang Xu Jan 1998

Multi-Level Programmable Arrays For Sub-Micron Technology Based On Symmetries, Marek Perkowski, Malgorzata Chrzanowska-Jeske, Yang Xu

Electrical and Computer Engineering Faculty Publications and Presentations

Regular layout is a fundamental concept in VLSI design which can have application in custom design for submicron technologies, designing new architectures for fine-grain Field Programmable Gate Arrays (FPGAs) and Electrically Programmable logic Devices (EPLDs), and minimization of logic functions for existing FPGAs. PLAs are well known examples of regular layouts. Lattice diagrams are another type of regular layouts that have been recently introduced for layout-driven logic synthesis. In this paper we extend and combine theses two ideas, by introducing the multi-level PLA-like structures, composed from multi-output (pseudo) symmetrical lattice planes and other planes (multi-input, multi-output regular blocks). The main …

Go to article

Few-Cycle Pulses In Two-Level Media, Lee W. Casperson Jan 1998

Few-Cycle Pulses In Two-Level Media, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

Techniques for producing, measuring, and applying ever shorter electromagnetic pulses are being developed for incorporation in a variety of modern high-speed systems. In many cases these pulses are at most a few cycles in length, and so-called half-cycle electromagnetic pulses are also widely employed. The interaction of such pulses with two-level media is considered here in detail, and these media are basic to many of the absorbing and amplifying configurations of optics and laser studies. Significant delays and distortion of the resulting polarization and population pulses can occur, and nonlinear optical effects are also revealed. The limitations of the parity, …

Go to article

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali Jan 1998

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The surface step density on the vicinal Pb(111) and the surface vacancy density on Pb(100) after laser superheating and melting are investigated using reflection high-energy electron diffraction. With ∼100-ps laser pulses, Pb(111) surface superheating does not significantly change the density of the steps and step-edge roughness. However, after laser surface melting, the average terrace width and the string length at the step edge become as large as those at room temperature. The average terrace width at 573 K changes from 38±15 to 64±19 Å after laser surface melting, while the average string length at the step edge changes from 90±14 …

Go to article

Temperature Dependence Of Step Density On Vicinal Pb(111), Z. H. Zhang, H. E. Elsayed-Ali Jan 1998

Temperature Dependence Of Step Density On Vicinal Pb(111), Z. H. Zhang, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The temperature dependence of step density on the vicinal Pb(111) surface is investigated using reflection high-energy electron diffraction. When the temperature is increased from 323 to 590 K. the average terrace width and the average string length at the step edge decrease from 85±25 to 37±16 Å and from 220±33 to 25±8 Å, respectively. Thermal step collapse on the Pb(111) surface near its bulk melting temperature is not observed. Above 530±7 K, the change in the string length at the step edge with temperature becomes small, and the intensity of the (00) beam is significantly decreased. We conclude that partial …

Go to article

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics In Single-Crystal Au(111) Films, J. Cao, Y. Gao, H. E. Elsayed-Ali, R. J. D. Miller, D. A. Mantell Jan 1998

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics In Single-Crystal Au(111) Films, J. Cao, Y. Gao, H. E. Elsayed-Ali, R. J. D. Miller, D. A. Mantell

Electrical & Computer Engineering Faculty Publications

The energy-dependent relaxation of photoexcited electrons has been measured by time-resolved two-photon photoemission spectroscopy on single-crystal Au(111) films with thickness ranging from 150 to 3000 Å. It is found that the energy-dependent relaxation does not show any significant thickness dependence, which indicates that electron transport is a much slower dynamical process in the near-surface region than expected from bulk properties. Furthermore, lifetimes of the photoexcited electrons can be fitted well by the Fermi-liquid theory with a scaling factor plus an effective upper lifetime. This observation enables separation of electron-electron scattering, and to a lesser extent electron-phonon scattering, processes from electron-transport …

Go to article

Modeling Electromagnetic Disturbances In Closed-Loop Computer Controlled Flight Systems, W. Steven Gray, Oscar R. Gonzalez Jan 1998

Modeling Electromagnetic Disturbances In Closed-Loop Computer Controlled Flight Systems, W. Steven Gray, Oscar R. Gonzalez

Electrical & Computer Engineering Faculty Publications

High intensity electromagnetic radiation has been demonstrated to be a source of computer upsets in commercially available digital flight control systems. In this paper we introduce an electromagnetic disturbance model which can be used for stability analysis and augmentation of any such digitally implemented control law. The model is composed of a Markovian exosystem supplying radiation events to a discrete-time jump linear system which models how the radiation interferes with the nominal operation of the closed-loop system. We discuss how this model can be used to characterize stability and how it can be parametrized and validated in an experimental setting.

Go to article

Atomic Hydrogen Cleaning Of Inp(100) For Preparation Of A Negative Electron Affinity Photocathode, K. A. Elamrawi, M. A. Hafez, H. E. Elsayed-Ali Jan 1998

Atomic Hydrogen Cleaning Of Inp(100) For Preparation Of A Negative Electron Affinity Photocathode, K. A. Elamrawi, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Atomic hydrogen cleaning is used to clean InP(100) negative electron affinity photocathodes. Reflection high-energy electron diffraction patterns of reconstructed, phosphorus-stabilized, InP(100) surfaces are obtained after cleaning at ∼400 °C. These surfaces produce high quantum efficiency photocathodes (∼8.5%), in response to 632.8 nm light. Without atomic hydrogen cleaning, activation of InP to negative electron affinity requires heating to ∼530 °C. At this high temperature, phosphorus evaporates preferentially and a rough surface is obtained. These surfaces produce low quantum efficiency photocathodes (∼0.1%). The use of reflection high-energy electron diffraction to measure the thickness of the deposited cesium layer during activation by correlating …

Go to article

First Prev