Electrical and Computer Engineering Commons^™

Investigation Of Pathophysiologic Trends In Caucasian And Afro-American Hypertensives By Means Of Heart Rate Variability Recording During Upright Tilt-Table Testing, Jose F. Torrealba

Theses

The incidence of hypertension is more prevalent among the Afro-American population than the Caucasians and there is not a satisfactory explanation for this discrepancy.

Heart Rate Variability (HRV) has been demonstrated to reflect the relative activities of the sympathetic (SMP) and parasympathetic (PSMP) divisions of the autonomic nervous system (ANS).

This study consisted in comparing the HRV, as well as the blood pressure (BP) of four different groups during up-right tilt table testing. The subjects were grouped by age, gender, race and health condition. Analysis in time and frequency domain was applied to the data. In the frequency domain, the …

Petri Net Modeling And Performance Analysis Of Can Fieldbus, Ji-Qiong Zhou

Theses

The CAN FB (Controller Area Network FieldBus) has been in existence for ten years. It supports automated manufacturing and process control environments to interconnect intelligent devices such as valves, sensors, and actuators. CAN FieldBus has a high bit rate and the ability to detect errors. It is immune to noise and resistant to shock, vibration, and heat. Two recently introduced mechanisms, Distributed Priority Queue (DPQ) and Priority Promotion (PP) enable CAN FieldBus networks to share out the system bandwidth and grant ail upper bound on the transmission times so as to meet the requirements in real-time communications. Modeling and analysis …

Radiative Properties Of Silicon, Anamika Patel

Theses

The objective of this thesis was 1) to study the radiative properties of silicon in the wavelength range of 1 to 20 microns and temperature range of 30 to 1000°C for the development of a multi-wavelength pyrometer 2) to develop a [sic] methodologies for deconvolution of the measured optical properties to yield fundamental optical constants of bulk materials. A novel spectral emissometer has been utilized for measurement of the temperature dependent radiative properties of silicon. The temperature determination capability of the emissometer was tested and verified using a standard thermocouple embedded in a silicon wafer. The temperature measurement accuracy, with …

Design, Fabrication And Characterization Of Silicon Microlenses For Ir-Ccd Image Sensors, Dhiren Pattnaik

Theses

There is a growing trend in the study of Focal Plane Arrays(FPAs) of very small microlenses, used for a wide variety of imaging and sensing applications, to increase optical efficiency. Present day sensor technology might take a different direction altogether with the development of compact, high quality, high resolution imaging microlenses, which could make the fill factor >90%. A method to increase light sensitivity of Interline Transfer(IT) type image sensors is to position microlens FPAs on top of the image sensors. FPAs are structures of small lenses which focus the incoming light on the photo sensitive part of the image …

Collaborative Filtering In Tv Recommender, Elizabeth Podberezniak

Theses

The thesis describes different types of collaborative filtering methods to filter information from the large amount available and presents examples of such systems in different domains. It focuses on automated collaborative filtering to generate personalized recommendation of information.

Different variations of the automated collaborative filtering scheme are developed and analyzed in the thesis. An additional adjustment of the predicted score is implemented in order to improve precision of the recommendation. Different combinations of parameters are analyzed to maximize system effectiveness.

The data for the analysis was gathered through TV Recommender, a World Wide Web system developed for the thesis. The …

Electrochemical Preparation Of Rare Earth Functional Materials And Application Of Rare Earth To Electrochemistry, Qi-Qin Yang, Tong-Xiang Ye

Journal of Electrochemistry

The new progress and related mechanism of the electrochemical preparation of rare earth materials (magnets, magnetooptic materials, battery materials, luminescent devices, semiconductors, superconductors) and the application of rare earth to the electrochemical areas (e.g. electroplating, corrosion, electrosynthses) have introduced.

Studies Of Surface Alloy As High Efficient Electrocatalyst For Glyoxylic Acid Synthesis, Sheng-Pei Chen, Sheng-Qing Xia, Shi-Gang Sun

Journal of Electrochemistry

/

In-Situ Raman Spectroscopic Study Of The Oxidation And Reduction Of Ag Electrode In Na2So4, Yan-Xia Chen, Kai-Qi Huang, Zhong-Qun Tian

Journal of Electrochemistry

In-situ Raman spectroscopy combined with cyclic voltammogram measurements was used to investigate formation of oxygen species at Ag electrode surfaces during the oxidation and reduction process in 0.1 mol/L Na₂SO₄ solution. The time dependent Raman spectra show that at potentials positive of 0.2 V, adsorption of oxygen atom occurs, while at the potentials positive of 0.4 V, some oxygen atoms migrate into subsurface of the Ag electrode and the other form strongly bound oxygen on the surface through chemical bond. At the same potentials, part of the silver atoms are oxidized and form Ag₂SO_{4 …}

Studies On The Transport Properties Of Zn2+ In The Zn/V2O5 Secondary Battery With Aqueous Medium, Jia-Hong Zhou, Kuan-Hong Xue, Gu-Ping Pan

Journal of Electrochemistry

The transport properties and the reaction mechanism of Zn²⁺ in the cathode material of Zn/V₂O₅ secondary battery with aqueous medium were studied by use of intermittent titration experiments and X-Ray diffraction analysis. The relations of some kinetic parameters to the discharge depth were discussed. The results of the experiments show that the cathodic discharge reaction is an intercalation process.

Electrode Process Of Lithium Ions On Aluminum Electrode In Molten Licl-Kcl, Shu-Zhen Duan, Cong-Sheng Guan, Qing-Rong Shi, Xin-Dong Wang

Journal of Electrochemistry

The Deposition mechanism of Lithium on aluminium electrode was studied by using linear sweep voltammetry and potential step method. The formation of α-solid solution was controlled by the diffusion of lithium within the aluminium substance. The formation of β-LiAl alloy was limited by the rate of forming the alloy at the legining, and by diffiusion of lithium through the β- LiAl alloy layer was limited by the rate of forming the alloy at the begining, and by the diffusion of lithium through the β-LiAl alloy later. Neucleation polarization for the formation of β-LiAl alloy was observed. This polarization is an …

New Esr-Electrochemical Cell Designs For Coaxial Microwave Cavity, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

New cell designs for simultaneous electrochemical (EC) and electron spin resonance (ESR) measurements are reported for coaxial microwave cavity. Adjustable shieldings are introduced so that the working electrode can be much shorter than the full height of the cavity. Besides the traditional helical electrode, the working electrode can be cylinders made from metal plates, metallic meshes or even composite materials. The counter electrode can be placed either inside or outside the cavity. These features make the new designs more flexible than that previously reported. With a nonperforated cylindrical electrode, this cell can be used to determine the standard potential and …

System And Method For Improving Data Acquisition Capability In Spectroscopic Ellipsometers, Steven E. Green, Craig M. Herzinger, Blaine D. Johs, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

The present invention is applicable generally to Spectroscopic Rotatable and Rotating Element Ellipsometers which utilize a relatively large range of wavelengths. Disclosed is a system and method for controlling the polarization state of a polarized beam of light so that it is in a range where the sensitivity of a Polarization State Detector used to measure changes in said polarized beam of light resulting from interaction with a Sample System. to noise and measurement errors etc.. is reduced. Exemplified is a system. and method of use, for simultaneously setting both measured ellipsometric ALPHA, and ellipsometric BETA parameter values, (or equivalents), …

Electroluminescent Device Having Electroluminescent Compound And Liquid Crystalline Compound, Rifat A.M. Hikmet, David Braun, Aemilianus G.J. Staring, Hermanmus F.M. Schoo, Johan Lub

Electrical Engineering

A description is given of an electroluminescent device (1) having an LED structure, which is composed of an active layer (7) of oriented liquid-crystalline and electroluminescent compounds and a transparent positive electrode layer (5) which is preferably made from an electroconductive polymer. By previously rubbing the electrode layer (5) in one direction with a velvet cloth, an orientation is induced in the molecules in the active layer (7), the orientation being frozen by cooling or polymerization. The electroluminescent device (1) emits polarized light whose direction of polarization is parallel to the direction of rubbing.

From Country Club To Ghetto : The Uneven Distribution Of Energy Cost Between Areas Of Different Economic Class, Kenya R. Reeves

Electronic Dissertations and Theses

For years there has been controversy over the uneven distribution of energy costs. Documented energy complaints are on file on the state as well as national level of government. Various sources have performed adequate research that shows that there is a difference in energy cost based on economic class. In order to prove that persons of different economic class pay different rates for energy, two distinct areas of Baton Rouge were issued surveys-Scotlandville and Bluebonnet. Questions used were retrieved from secondary sources and Entergy as well. From the results computed, there is definitely a difference in energy costs depending upon …

Impedance Of A Dipole Antenna In Ionospheric Plasma, Pavel Nikitin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Different approaches to evaluating the behavior of the impedance of an electrically short dipole antenna in the ionosphere as a function of the driving frequency are discussed. The induced EMF method in quasi-static approximation is chosen for evaluating the impedance and explained in great detail. The E-region of the ionosphere is considered and the cold collisional plasma model is used.

The influence of a density gradient in plasma on the impedance is explored, and the possible current distributions on the surface of the antenna are considered, including the current distribution for the antenna with a gap. The conclusions are drawn …

Home Automation System, Joshua James Earl

Undergraduate Honors Capstone Projects

The home is the place where people should feel the most comfortable. Considerable technological development is dedicated to making the home more comfortable; smart appliances are a good example of this. There is always a market for products that provide easier control of home appliances and electrical devices. With this in mind, I have designed and implemented a PC-controlled Home Automation System (HAS). This HAS allows complete control of home appliances and electrical devices from the homeowner's IBM-compatible PC. make use of advanced technology in the transmission of the control signals by way of power-lines already present in the home. …

The Fm Radio Program, Andrew Olsen

Undergraduate Honors Capstone Projects

The PC FM Radio program allows a PC user to listen to FM radio stations while using a PC. The application includes controls that will let the PC user select different FM stations, preset a favorite FM station, select a preset station, and record the current station. The FM hardware is an ISA expansion card that provides the audio signal to the PC through the auxiliary input jack in the sound card. The supporting software runs on Windows 95 machines. A help file is included for simple instructions. The software runs in the background and doesn't use much of the …

Final Report: City Of Anaheim/Caltrans/Fhwa Advanced Traffic Control System Field Operational Test Evaluation Task C, Video Traffic Detection System, Art Maccarley, Cal Poly Transportation Electronics Laboratory

Electrical Engineering

A technical evaluation was conducted as a subtask of the “City of Anaheim Advanced Traffic Control System Field Operational Test (FOT)”, funded by the US DOT / FHWA and the California Department of Transportation. Partners for this FOT are the City of Anaheim, Odetics Inc. of Anaheim, JHK Consulting, and the California Department of Transportation. This report is the result of evaluation Task C “VTDS Evaluation”, one of three evaluation tasks covering components of the FOT. The component evaluated under Task C is a video-based vehicle detection system for actuation of traffic signals at intersections. This system, referred to as …

Multiple-Input Joint Transform Correlator For Wavelet Feature Extraction, Samuel Peter Kozaitis, Mark A. Getbehead

Electrical Engineering and Computer Science Faculty Publications

We describe a joint transform correlator (JTC) that uses multiple input images encoded in the spatial domain for multiwavelet feature extraction. We extend the theory of a JTC to multiple inputs, which enables various combinations of cross-correlations between input images to be performed. Furthermore, we provide experimental results for four inputs with an optically addressed spatial light modulator in the Fourier plane. In addition, it is possible that the space-bandwidth product for multiwavelet feature extraction can be made the same as for a two-input JTC. © 1998 Society of Photo-Optical Instrumentation Engineers.

Building Lms Adaptive Filters With Register-Based Fpgas, Li Ding

Electrical & Computer Engineering Theses & Dissertations

In this thesis, an 8-bit least mean squares (LMS) adaptive digital filter with 16 coefficients is implemented on a single FPGA, using the MaxPlus+2 design environment. The system is constructed as a hierarchical structure, using four different levels of design hierarchy. Subdesigns at each level of the hierarchy project are complied, fitted and simulated to test and verify their functional correctness. The complete system is tested and verified by checking the MaxPlus+2 simulator results against fixed-point integer arithmetic simulations written in Matlab. The resulting adaptive filter is subsequently mapped to the Alters FLEX I OK20TC144-3 device, resulting in a 14,500 …

Field Emission And Breakdown Processes In Vacuum Gaps With Sio(X)-Coated Cathodes, Raymond Jack Allen Iii

Electrical & Computer Engineering Theses & Dissertations

Field emission of electrons is the major cause of electrical breakdown in high voltage systems in vacuum. The highest hold-off electric field of the carefully polished and cleaned stainless steel cathodes was increased to 70MV/m. Thin silicon monoxide, SiO_x, cathode coatings reduced field emission and increased the hold-off field further. Coating the stainless steel cathodes with 2μ SiO_x reduced the field emission current by at least two orders of magnitude at field of 50MV/m and increased the breakdown field to 140MV/m, doubling the breakdown voltage.

The increase in hold-off voltage with SiO_x coatings is discussed in …

Material Evaluation By Pulsed Diode Laser Optoacoustics, Xiaodong Xu

Electrical & Computer Engineering Theses & Dissertations

Pulsed diode laser optoacoustic diagnostics were carried out to characterize solid sample materials. The apparatus developed is compact, portable, cost-effective and therefore very promising for both industrial as well as laboratory applications. To our knowledge, this is the first time that optoacoustic characterization and measurement have been performed with a diode laser. The method was successfully applied to measure the thickness of a multilayer structure non-intrusively. Internal cracks of the material were detected by this technique.

A theory for optoacoustic signal generation, propagation and detection is given. A numerical analysis technique is developed to solve for the expected signal. In …

Hermite–Sinusoidal-Gaussian Beams In Complex Optical Systems, Lee W. Casperson, Anthony A. Tovar

Electrical and Computer Engineering Faculty Publications and Presentations

Sinusoidal-Gaussian beams have recently been obtained as exact solutions of the paraxial wave equation for propagation in complex optical systems. Another useful set of beam solutions for Cartesian coordinate systems is based on Hermite–Gaussian functions. A generalization of these solution sets is developed here. The new solutions are referred to as Hermite–sinusoidal-Gaussian beams, because they are in the form of a product of Hermite-polynomial functions of either complex or real argument, sinusoidal functions of complex argument, and Gaussian functions of complex argument. These beams are valid for propagation through systems that can be represented in terms of complex beam matrices, …

Thermal Lattice Boltzmann Simulations Of Variable Prandtl Number Turbulent Flows, Min Soe, George Vahala, Pavol Pavlo, Linda L. Vahala, Hudong Chen

Electrical & Computer Engineering Faculty Publications

Thermal lattice Boltzmann (TLBE) models that utilize the single relaxation time scalar Bhatnagar, Gross, and Krook collision operator have an invariant Prandtl number. For flows with arbitrary Prandtl number, a matrix collision operator is introduced. The relaxation parameters are generalized so that the transport coefficients become density independent. TLBE simulations are presented for two-dimensional free decaying turbulence induced by a strongly perturbed double velocity shear layer for various Prandtl numbers.

Tooth Contact Sensing Apparatus And Method, John D. Summer, Edmund Pierzchala, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

An apparatus and method for sensing tooth contact includes at least one, and more typically plural, vibration sensors which are coupled to the non-biting surfaces of teeth. These sensors produce output signals when the associated teeth contact one another during jaw closing, the output signals being processed to provide information concerning tooth contact. For example, information concerning the ?rst tooth which contacts may be determined, the sequence of contact by various teeth may be determined, as well as the time between contact of the various teeth. Other information concerning tooth contact may also be determined and dis played in a …

Ellipsometric Determination Of Optical Constants For Silicon And Thermally Grown Silicon Dioxide Via A Multi-Sample, Multi-Wavelength, Multi-Angle Investigation, C. M. Herzinger, B. Johs, W. A. Mcgahan, John A. Woollam, W. Paulson

Department of Electrical and Computer Engineering: Faculty Publications

Optical constant spectra for silicon and thermally grown silicon dioxide have been simultaneously determined using variable angle of incidence spectroscopic ellipsometry from 0.75 to 6.5 eV. Spectroscopic ellipsometric data sets acquired at multiple angles of incidence from seven samples with oxide thicknesses from 2 to 350 nm were analyzed using a self-contained multi-sample technique to obtain Kramers–Kronig consistent optical constant spectra. The investigation used a systematic approach utilizing optical models of increasing complexity in order to investigate the need for fitting the thermal SiO₂ optical constants and including an interface layer between the silicon and SiO₂ in modeling …

The Rationale For Negligible Risk Exemptions In The Telecommunications Act Of 1996: Cellular Phone And Personal Communication System Transmitters, Gregg H. Claycamp

RISK: Health, Safety & Environment (1990-2002)

Dr. Claycamp explains the adequacy of current legislation and regulation.

Joint Wavelet Transform Correlation With Separated Target And Reference Planes, Boon Yi Soon, Mohammad A. Karim, Russell C. Hardie, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

In recent years, we realize the usefulness of feature extraction for optical correlator and hereby, we investigate the capability of Laplace operator in feature extraction of multiple targets. The first-order terms and the false alarm terms in the correlation output would be removed using electronic power spectrum subtraction technique. Most importantly, the entire magneto-optic SLM is completely utilized for displaying only targets in the input scene. A new cost efficient hardware implementation is proposed and aforementioned result of the proposed system is evaluated through computer simulation.

Understanding Comics: The Invisible Art, Alan D. Manning

Faculty Publications

INSIGHTS about professional communication may come from odd and unexpected places. McCloud's Understanding Comics (hereafter UC) is a case in point. Despite the juvenile connotations evoked by any discussion of comic books, the theory of visual communication presented in UC arguably rivals the best of contemporary semiotics (that is, the study of how we make meaning out of gestures, words, paragraphs, pictures, and so on).

Spatial Resolution Enhancement Of Ssm/I Data, David G. Long, Douglas L. Daum

Faculty Publications

One of the limitations in using Special Sensor Microwave/Imager (SSM/I) data for land and vegetation studies is the relatively low-spatial resolution. To ameliorate this limitation, resolution-enhancement algorithms can be applied to the data. In this paper, the Backus-Gilbert inversion (BGI) technique and the scatterometer image-reconstruction (SIR) algorithm are investigated as possible methods for creating enhanced resolution images from SSM/I data. The two algorithms are compared via both the simulation and the actual SSM/I data. The algorithms offer similar resolution enhancement, though SIR requires significantly less computation. Sample results over two land regions of South America are presented.